The NIBCO 2 in. ABS DWV coupling features a hub x hub connection and connects ABS DWV piping lengths with solvent weld connections. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper or cast iron through the use of transition fittings. The NIBCO ABS DWV coupling is used in residential and commercial drain, waste and vent systems.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Connects lengths of ABS piping
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

The NIBCO ABS DWV sanitary tee is used in residential and commercial drain, waste and vent systems. The ABS DWV sanitary tee features a hub x hub x hub connection and a flowing sweep to aid in the evacuation of waste and used fluids. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 2 X 11/2 X 11/2 in. Inside Diameter and 2 1/8 X 1 5/8 X 1 5/8 in. Outside Diameter
• ABS requires no primer
• Connects a branch line into a vertical ABS drain line
• Use for non-pressurized sanitary systems
• Helps remove waste water and water-borne wastes from plumbing fixtures and appliances
• Hub x hub x hub solvent-welded connections
• Maximum working pressure of 5 psi
• "2 X 11/2 X 11/2 I.D. and 2 1/8 X 1 5/8 X 1 5/8 O.D."

Use the NIBCO 1-1/2 in. ABS DWV 90 degree Hub x Hub Vent Elbow with non-pressurized drain, waste and vent systems to help remove wastewater from plumbing fixtures. The fitting features an ABS construction. The ABS DWV 90 degree vent elbow features a hub x hub connection and the abrupt 90 degree angle is used to change the direction of flow in the venting side of the system. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS construction
• For use with drain, waste and vent systems
• Helps air circulate in drainage piping
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

The NIBCO 2 in. x 1-1/2 in. ABS DWV flush bushing is used in residential and commercial drain, waste and vent systems. The ABS DWV flush bushing features a spigot x hub connection and provides a means for reducing the size of the line. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 2 X 11/2 in. Inside Diameter and 2 1/8 x 1 5/8 in. Outside Diameter
• ABS construction
• Used for non-pressurized DWV sanitary systems
• Not for use with primer
• Reduces pipe to smaller size by inserting into an ABS sitting hub
• Spigot x hub connection type
• Solvent-welded connections
• 5 psi maximum working pressure
• UL Listed 94V-0

The NIBCO 1-1/2 in. ABS DWV coupling is used in residential and commercial drain, waste and vent systems. The ABS DWV coupling features a hub x hub connection and connects ABS DWV piping lengths with solvent weld connections. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• ABS construction for durability
• For use with DWV piping systems
• Use to connect lengths of ABS piping (not included) together
• Provides air circulation
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

The ABS DWV 90 degree long turn street elbow features a spigot x hub connection and long radius and is used to change the direction of flow. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is light-weight, safe to handle and easy to install.

• NIBCO ABS DWV 90 degree long radius, long turn street elbow is used in residential and commercial drain, waste and vent systems
• ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper or cast iron through the use of transition fittings
• Service temperature of -40 degree F to 180 degree F
• CSA B181.1
• ASTM D2665
• ASTM D3965
• ASTM D2661 and D3311
• UL listed 94V-0
• NSF/ANSI standard 14

Connect lengths of ABS piping with the NIBCO 3 in. ABS DWV H x H Coupling. The ABS DWV coupling features a hub x hub connection and connects ABS DWV piping lengths with solvent weld connections. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS construction
• Use with drain, waste and vent systems to help remove wastewater from plumbing fixtures
• Connects lengths of ABS piping
• Solvent weld connections
• Not for use with a primer
• Maximum working pressure of 5 psi

The ABS DWV 90 degree long turn street elbow features a spigot x hub connection and long radius and is used to change the direction of flow. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is light-weight, safe to handle and easy to install.

• NIBCO ABS DWV 90 degree long radius, long turn street elbow is used in residential and commercial drain, waste and vent systems
• ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings
• Service temperature range of -40 to 180 degree F
• CSA B121.1
• ASTM D2665
• ASTM D3965
• ASTM D2661 and D3311
• UL listed 94V-0
• NSF/ANSI standard 14

The NIBCO 4 in. x 4 in. x 3 in. ABS Sanitary Tee can be used to connect a horizontal ABS branch line to a vertical ABS drain line. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 4 X 4 X 3 in. Inside Diameter and 4 1/8 X 4 1/8 X 3 1/8 in. Outside Diameter
• Do not use primer with ABS
• Used to connect a horizontal ABS branch line into a vertical ABS drain line
• Hub x hub x hub connections
• Solvent-welded connections
• NSF/ANSI Standard 14
• UL Listed 94V-0
• "4 X 4 X 3 I.D. and 4 1/8 X 4 1/8 X 3 1/8 O.D."

The NIBCO 1-1/2 in. female adapter features a spigot x female NPT thread connection and provides a means for adapting a solvent weld connection to a threaded connection. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO plastic fittings are backed by a 5-year limited warranty.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• The NIBCO 3 in. ABS DWV female adapter is used in residential and commercial drain, waste and vent systems
• Adapts acrylontrile -butadiene styrene pipe to male pipe threads
• Designed for use with non-pressurized sanitary system drain waste vent
• Solvent weld spigot x female iron pipe thread connection
• Maximum working pressure of 5 psi
• NSF/ANSI standard 14
• "11/2 I.D. and 1.625 O.D."

Use the NIBCO 2 in. x 1-1/2 in. ABS DWV Hub x Hub Reducing Coupling to join 2 lengths of pipe that differ in size. The durable fitting features ABS construction. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 X 11/2 in. Inside Diameter and 2 1/8 x 1 5/8 in. Outside Diameter
• ABS construction for durability
• Connects lengths of pipe of 2 different sizes
• For use with DWV piping systems
• Not for use with primer
• Solvent weld connections
• Helps air circulate in piping
• Maximum working pressure of 5 psi

The NIBCO ABS DWV 45-degree street elbow is used in residential and commercial drain, waste and vent systems. Complete the installation of your DWV system with the NIBCO ABS DWV 45-Degree Spigot x Hub Street Elbow. This ABS fitting welds to pipe with a solvent and changes the direction of piping 45 degrees.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 45 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• Made in USA

The NIBCO 3 in. x 3 in. 1-1/2 in. ABS DWV Hub x Hub x Hub Sanitary Tee connects a branch line to a vertical drain line. The tee has a maximum working pressure of 5 psi. ABS is lightweight, safe to handle and easy to install.

• 3 X 3 X 11/2 in. Inside Diameter and 3 1/8 X 3 1/8 X 1 5/8 in. Outside Diameter
• ABS does not require primer
• Connects a branch line into a vertical ABS drain line
• For use with non-pressurized sanitary systems
• Hub x hub x hub solvent-welded connections
• Maximum working pressure of 5 psi
• NSF/ANSI Standard 14
• UL Listed 94V-0
• ASTM D2665 and D3311

The NIBCO 1-1/2 in. ABS DWV female adapter features a hub x female NPT thread connection and provides a means for adapting a solvent weld connection to a threaded connection. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO plastic fittings are backed by a 5-year limited warranty.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• The NIBCO 1-1/2 in. ABS DWV female adapter is used in residential and commercial drain, waste and vent systems
• For above-ground DWV
• Join ABS to standard male pipe threads using solvent (do not use primer with ABS)
• NSF/ANSI standard 14
• UL listed 94V-0
• NSF U.P. certified
• "11/2 I.D. and 1.625 O.D."

Use the NIBCO 3 in. ABS DWV 22-1/2 SPG x Hub Street Elbow to adapt ABS piping to cast iron. The ABS DWV 22-1/2 degree elbow features a spigot x hub connection and is used to change the direction of flow. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS construction
• For use in drain, waste and vent systems to help remove wastewater from plumbing fixtures
• Adapts ABS piping to cast iron using solvent welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• NSF/ANSI standard 14
• UL listed 94V-0
• "3 I.D. and 3.125 O.D."

The NIBCO 1-1/2 in. ABS P-Trap is designed to prevent sewer gas from escaping from a plumbing fixture or drain. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• Do not use primer with ABS
• Hub x hub connections
• Solvent-welded connections
• NSF/ANSI standard 14
• UL Listed 94V-0
• Maximum working pressure of 5 psi

The NIBCO 1-1/2 in. x 1-1/4 in. ABS DWV SPG x SJ Street Trap Adapter is used in a non-pressurized sanitary system to adapt a fitting hub to a tubular trap at the floor or wall. Drain, Waste and Vent (DWV) allows removal of waste water and water-borne waste away from appliances and fixtures. ABS is lightweight, safe to handle and easy to install.

• 11/2 X 11/4 in. Inside Diameter and 1 5/8 X 1 3/8 in. Outside Diameter
• ABS plastic material
• For above-ground DWV
• ABS solvent welds to fitting hub and incorporates slip joint for tubular traps
• Do not use primer with ABS
• NSF/ANSI Standard 14
• UL Listed 94V-0
• "11/2 X 11/4 I.D. and 1 5/8 X 1 3/8 O.D."

The NIBCO 1-1/2 in. ABS DWV male adapter is used above-ground in Drain, Waste and Vent (DWV) non-pressurized sanitary systems which remove water-borne waste and waste water from appliances and fixtures. This adapter adapts ABS to standard female pipe threads. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• The NIBCO 1-1/2 in. ABS DWV male adapter is used in residential and commercial drain, waste and vent systems
• For above-ground DWV
• Join ABS to standard female pipe threads using solvent (do not use primer with ABS)
• CSA B181.1
• ASTM D2665
• ASTM D2661 and D3311
• UL Listed 94V-0
• NSF/ANSI Standard 14
• NSF U.P. Certified

The NIBCO 4 in. x 4 in. x 3 in. ABS DWV 45 H x H x H Wye leads a branch line into a horizontal drain line in an ABS sanitary system. It is secured with solvent welds. ABS are lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron using transition fittings.

• 4 X 4 X 3 in. Inside Diameter and 4 1/8 X 4 1/8 X 3 1/8 in. Outside Diameter
• Made of ABS
• Connects an ABS branch line to a horizontal ABS drain line
• Solvent-welded connections
• Not for use with primer
• NSF/ANSI standard 14
• UL Listed 94V-0
• "4 X 4 X 3 I.D. and 4 1/8 X 4 1/8 X 3 1/8 O.D."

The NIBCO 1-1/2 in. ABS DWV 22-1/2 degree Hub x Hub Elbow is built for use with DWV systems. Use the ABS fitting to redirect piping 22-1/2 degree s.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 22-1/2 degree
• Solvent welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "11/2 I.D. and 1.625 O.D."

Install the NIBCO 4 in. ABS DWV 90-Degree Hub x Hub Long-Turn Elbow to remove wastewater from plumbing fixtures and appliances. This durable plastic elbow provides air circulation within piping and is designed for use in non-pressurized sanitary system DWV applications. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 4 in. Inside Diameter and 4.125 in. Outside Diameter
• ABS plastic construction
• Changes the direction of piping by 90 degree
• Removes wastewater from plumbing fixtures and appliances
• Suitable for use in non-pressurized sanitary system DWV applications
• Provides air circulation within piping
• Compatible with ABS pipe
• Solvent-welded connections
• Not for use with primer

Connect a branch line into a vertical ABS drain line with the NIBCO 2 in. x 2 in. x 1-1/2 in. ABS DWV Hub x Hub x Hub Sanitary Tee. The tee is designed for use with non-pressurized sanitary systems. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 X 2 X 11/2 in. Inside Diameter and 2 1/8 X 2 1/8 X 1 5/8 in. Outside Diameter
• ABS requires no primer
• Connects a branch line into a vertical ABS drain line
• For use with non-pressurized sanitary systems
• Hub x hub x hub solvent-welded connections
• Maximum working pressure of 5 psi
• NSF/ANSI Standard 14
• "2 X 2 X 11/2 I.D. and 2 1/8 X 2 1/8 X 1 5/8 O.D."

The NIBCO 1-1/2 in. ABS DWV Hub x Hub x Cleanout Test Tee is designed for use with non-pressurized sanitary systems. The tee provides a cleanout opening and plug. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS requires no primer
• Provides a cleanout opening and plug
• For use with non-pressurized sanitary systems
• Hub x hub x cleanout solvent-welded connections
• Maximum working pressure of 5 psi
• NSF/ANSI Standard 14
• "11/2 I.D. and 1.625 O.D."

The NIBCO 4 in. ABS DWV Hub x Hub x Hub Cleanout Tee can be inserted into an ABS sitting hub to reduce to a smaller pipe size. The tee should be used with non-pressurized sanitary systems. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 4 in. Inside Diameter and 4.125 in. Outside Diameter
• ABS does not require primer
• Insert into an ABS sitting hub to reduce to smaller pipe size
• For use with non-pressurized sanitary systems
• Hub x hub x hub solvent-welded connections
• Maximum working pressure of 5 psi
• ASTM D2661, D3311, D3965, D2665
• ASTM D3965
• ASTM D2661 and D3311
• NSF/ANSI Standard 14
• NSF U.P. Certified