Use the 2 in. ABS DWV 45 degree Hub x Hub Elbow to complete the installation of your DWV system. This fitting features ABS construction and redirects ABS piping (not included) 45 degree s. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with DWV piping systems
• Helps air circulate
• Redirects ABS piping (not included) 45 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "2 I.D. and 2.125 O.D."

The NIBCO 2 in. ABS DWV coupling features a hub x hub connection and connects ABS DWV piping lengths with solvent weld connections. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper or cast iron through the use of transition fittings. The NIBCO ABS DWV coupling is used in residential and commercial drain, waste and vent systems.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Connects lengths of ABS piping
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

With the NIBCO 2 in. ABS DWV 90 degree Hub x Hub Elbow, you can complete the installation of your DWV system. The fitting features ABS construction and changes the direction of piping by 90 degree s. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping by 90 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

The NIBCO ABS DWV 45-degree street elbow is used in residential and commercial drain, waste and vent systems. Complete the installation of your DWV system with the NIBCO ABS DWV 45-Degree Spigot x Hub Street Elbow. This ABS fitting welds to pipe with a solvent and changes the direction of piping 45 degrees.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 45 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• Made in USA

The 2 in. ABS DWV 90-Degree Hub x Hub Long-Turn Elbow is built for use with non-pressurized DWV systems to help remove wastewater from plumbing fixtures. The fitting features an ABS construction. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with non-pressurized DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 90 degree
• Solvent weld connections
• Never use a primer with ABS
• Long-turn design
• Maximum working pressure of 5 psi

The NIBCO 1-1/2 in. ABS DWV coupling is used in residential and commercial drain, waste and vent systems. The ABS DWV coupling features a hub x hub connection and connects ABS DWV piping lengths with solvent weld connections. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• ABS construction for durability
• For use with DWV piping systems
• Use to connect lengths of ABS piping (not included) together
• Provides air circulation
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

The NIBCO 1-1/2 in. ABS P-Trap is designed to prevent sewer gas from escaping from a plumbing fixture or drain. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• Do not use primer with ABS
• Hub x hub connections
• Solvent-welded connections
• NSF/ANSI standard 14
• UL Listed 94V-0
• Maximum working pressure of 5 psi

Use the NIBCO 1-1/2 in. ABS DWV 90 degree Hub x Hub Elbow with your DWV system to help remove wastewater from plumbing fixtures. The fitting features ABS construction, and it changes the direction of ABS piping 90 degree . ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of ABS piping 90 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

The NIBCO ABS DWV sanitary tee is used in residential and commercial drain, waste and vent systems. The ABS DWV sanitary tee features a hub x hub x hub connection and a flowing sweep to aid in the evacuation of waste and used fluids. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 2 X 11/2 X 11/2 in. Inside Diameter and 2 1/8 X 1 5/8 X 1 5/8 in. Outside Diameter
• ABS requires no primer
• Connects a branch line into a vertical ABS drain line
• Use for non-pressurized sanitary systems
• Helps remove waste water and water-borne wastes from plumbing fixtures and appliances
• Hub x hub x hub solvent-welded connections
• Maximum working pressure of 5 psi
• "2 X 11/2 X 11/2 I.D. and 2 1/8 X 1 5/8 X 1 5/8 O.D."

Connect lengths of ABS piping with the NIBCO 3 in. ABS DWV H x H Coupling. The ABS DWV coupling features a hub x hub connection and connects ABS DWV piping lengths with solvent weld connections. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS construction
• Use with drain, waste and vent systems to help remove wastewater from plumbing fixtures
• Connects lengths of ABS piping
• Solvent weld connections
• Not for use with a primer
• Maximum working pressure of 5 psi

Change the direction of piping 45 degree s with the 1-1/2 in. ABS DWV 45 degree Hub x Hub Elbow. The ABS DWV 45 degree elbow features a hub x hub connection and is used to change the direction of flow. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 45 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi

The NIBCO 1-1/2 in. ABS DWV Hub x Hub x Hub Sanitary Tee connects a branch line into a vertical ABS drain line in a non-pressurized sanitary system. The tee has a maximum working pressure of 5 psi. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS does not require primer
• Connects a branch line into a vertical ABS drain line
• For use with non-pressurized sanitary systems
• Maximum working pressure of 5 psi
• Hub x hub x hub solvent-welded connections
• NSF/ANSI standard 14

The ABS DWV 90 degree elbow features a hub x hub connection and is used to change the direction of flow. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron using transition fittings.

• ABS construction
• For use with drain, waste and vent systems to help remove wastewater from plumbing fixtures
• Solvent welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• NSF/ANSI standard 14
• UL Listed 94V-0

Connect a branch line into a vertical ABS drain line with the NIBCO 2 in. x 2 in. x 1-1/2 in. ABS DWV Hub x Hub x Hub Sanitary Tee. The tee is designed for use with non-pressurized sanitary systems. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 X 2 X 11/2 in. Inside Diameter and 2 1/8 X 2 1/8 X 1 5/8 in. Outside Diameter
• ABS requires no primer
• Connects a branch line into a vertical ABS drain line
• For use with non-pressurized sanitary systems
• Hub x hub x hub solvent-welded connections
• Maximum working pressure of 5 psi
• NSF/ANSI Standard 14
• "2 X 2 X 11/2 I.D. and 2 1/8 X 2 1/8 X 1 5/8 O.D."

The ABS DWV 45 degree street elbow features a spigot x hub connection and is used to change the direction of flow. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps circulate air in drainage piping
• Redirects piping 45 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "11/2 I.D. and 1.625 O.D."

The NIBCO 2 in. ABS DWV P-Trap is used in residential and commercial drain, waste and vent systems. The ABS DWV P-Trap features a hub x hub connection and provides a water seal so that wastewater will automatically be trapped in the arc of the configuration, thereby preventing unwanted gases from entering the household environment. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• Do not use primer with ABS
• Used under a plumbing fixture or drain to prevent sewer gas from escaping
• Hub x hub connections
• Solvent-welded connections
• NSF/ANSI Standard 14
• UL Listed 94V-0

The NIBCO 1-1/2 ABS DWV 90 degree Hub x Hub Elbow is built for use with non-pressurized DWV systems to help remove wastewater from plumbing fixtures. The fitting features an ABS construction and a long-turn design. ABS is lightweight, safe to handle and easy to install.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS construction
• For use with non-pressurized DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 90 degree
• Solvent weld connections
• Never use a primer with ABS
• Long-turn design
• Maximum working pressure of 5 psi

The NIBCO 3 in. ABS DWV 45 degree Hub x Hub Elbow is built for use with DWV systems to help remove wastewater from plumbing fixtures. The ABS fitting bends at a 45 degree angle to change the direction of piping. Do not test or use with compressed air or other gases.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Changes the direction of piping 45 degree
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "3 I.D. and 3.125 O.D."

The NIBCO 2 in. ABS DWV 45 H x H x H Wye links a branch line and a horizontal drain line in an ABS sanitary plumbing system. The ABS DWV 45 wye features a hub x hub x hub connection and allows for a connection to be made in continuous pipe line and branch out to a different direction. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• Made of ABS
• Connects an ABS branch line to a horizontal ABS drain line
• Solvent-welded connections
• Not for use with primer
• NSF/ANSI standard 14
• UL Listed 94V-0
• "2 I.D. and 2.125 O.D."

The NIBCO 1-1/2 in. ABS DWV trap adapter features a hub x slip joint connection and provides a means for adapting a solvent weld connection to a slip joint connection. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• NIBCO 1-1/2 in. ABS DWV trap adapter is used in residential and commercial drain, waste and vent systems
• Solvent welds over ABS fitting hub and incorporates a slip joint for tubular traps
• Do not use primer with ABS
• NSF/ANSI standard 14
• UL Listed 94V-0
• NSF U.P. certified

Put the NIBCO 3 in. x 3 in. x 2 in. ABS DWV 45 H x H x H Wye to use in your ABS sanitary system. The ABS DWV 45 Wye features a hub x hub x hub connection and allows for a connection to be made in continuous pipe line and branch out to a different direction. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 3 X 3 X 2 in. Inside Diameter and 3 1/8 x 3 1/8 x 2 1/8 in. Outside Diameter
• Made of ABS
• Connects an ABS branch line to a horizontal ABS drain line
• Solvent-welded connections
• Not for use with primer
• NSF/ANSI standard 14
• UL Listed 94V-0

The NIBCO ABS DWV long radius combination tee-wye is used in residential and commercial drain, waste and vent systems. The ABS DWV long radius combination tee-wye features a hub x hub x hub connection. The tee-wye allows for a connection to be made in continuous pipe line and branch out to a different direction. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 3 X 3 X 2 in. Inside Diameter and 3 1/8 X 3 1/8 X 2 1/8 in. Outside Diameter
• ABS requires no primer
• Use when connecting a horizontal ABS branch line into a vertical ABS drain line
• For use with non-pressurized sanitary systems
• Maximum working pressure of 5 psi
• Hub x hub x hub solvent-welded connections
• NSF/ANSI Standard 14
• "3 X 3 X 2 I.D. and 3 1/8 X 3 1/8 X 2 1/8 O.D."

The NIBCO 1-1/2 in. female adapter features a spigot x female NPT thread connection and provides a means for adapting a solvent weld connection to a threaded connection. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO plastic fittings are backed by a 5-year limited warranty.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• The NIBCO 3 in. ABS DWV female adapter is used in residential and commercial drain, waste and vent systems
• Adapts acrylontrile -butadiene styrene pipe to male pipe threads
• Designed for use with non-pressurized sanitary system drain waste vent
• Solvent weld spigot x female iron pipe thread connection
• Maximum working pressure of 5 psi
• NSF/ANSI standard 14
• "11/2 I.D. and 1.625 O.D."

The NIBCO ABS DWV 22-1/2-degree elbow is used in residential and commercial drain, waste and vent systems. The ABS DWV 22-1/2-degree elbow features a hub x hub connection and is used to change the direction of flow. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

• Service temperature -40°F to 180°F
• Do not test or use with compressed air or other gases
• ASTM D2665 & D3965
• ASTM D2661 and D3311
• UL Listed 94V-0
• NSF/ANSI Standard 14
• Size range 1-1/2" to 6"

Help prevent sewer gas from escaping by installing the NIBCO 1-1/2 in. ABS DWV Hub x Hub P-Trap under the discharge of a plumbing fixture or drain. The p-trap features hub x hub connections. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• ABS requires no primer
• Use under the discharge of a plumbing fixture or drain to help prevent sewer gas from escaping
• For use with non-pressurized sanitary systems
• Maximum working pressure of 5 psi
• Hub x hub solvent-welded connections
• NSF/ANSI standard 14
• UL Listed 94V-0

Connect a branch line into a vertical drain line with the NIBCO 2 in. ABS DWV Hub x Hub x Hub Sanitary Tee. The tee is designed for use with non-pressurized sanitary systems. ABS is lightweight, safe to handle and easy to install.

• ABS requires no primer
• Connects a branch line into a vertical drain line
• For use with non-pressurized sanitary systems
• Hub x hub x hub solvent-welded connections
• Maximum working pressure of 5 psi
• ASTM D2665
• ASTM D3965
• ASTM D2661 and D3311
• UL Listed 94V-0
• NSF/ANSI standard 14
• NSF U.P. certified

The NIBCO 3 in. ABS DWV 90 degree long turn elbow features a hub x hub connection and long radius and is used to change the direction of flow. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO plastic fittings are backed by a 5-year limited warranty.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of abs piping 90 degree
• Solvent welded connections
• Never use a primer with ABS
• Long-turn design
• Maximum working pressure of 5 psi
• ASTM D2665
• ASTM D2665
• ASTM D3965
• ASTM D2661 and D3311

Use the NIBCO 2 in. x 1-1/2 in. ABS DWV Hub x Hub Reducing Coupling to join 2 lengths of pipe that differ in size. The durable fitting features ABS construction. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 X 11/2 in. Inside Diameter and 2 1/8 x 1 5/8 in. Outside Diameter
• ABS construction for durability
• Connects lengths of pipe of 2 different sizes
• For use with DWV piping systems
• Not for use with primer
• Solvent weld connections
• Helps air circulate in piping
• Maximum working pressure of 5 psi

Use the NIBCO 3 in. ABS DWV 45-Degree Spigot x Hub Street Elbow to change the direction of ABS piping by 45 degrees. The fitting is designed for use in DWV systems to help remove wastewater from plumbing fixtures. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of ABS piping by 45 degree
• Solvent-welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "3 I.D. and 3.125 O.D."

The NIBCO 2 in. x 1-1/2 in. ABS DWV flush bushing is used in residential and commercial drain, waste and vent systems. The ABS DWV flush bushing features a spigot x hub connection and provides a means for reducing the size of the line. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 2 X 11/2 in. Inside Diameter and 2 1/8 x 1 5/8 in. Outside Diameter
• ABS construction
• Used for non-pressurized DWV sanitary systems
• Not for use with primer
• Reduces pipe to smaller size by inserting into an ABS sitting hub
• Spigot x hub connection type
• Solvent-welded connections
• 5 psi maximum working pressure
• UL Listed 94V-0

The NIBCO 4 in. ABS DWV 90-Degree Hub x Hub Elbow is built for use with DWV systems to help remove wastewater from plumbing fixtures. The fitting features an ABS construction. BS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 4 in. Inside Diameter and 4.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Solvent welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "4 I.D. and 4.125 O.D."

The NIBCO 2 IN. ABS DWV female adapter features a hub x female NPT thread connection and provides a means for adapting a solvent weld connection to a threaded connection. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO plastic fittings are backed by a 5-year limited warranty.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• The NIBCO 2 in. ABS DWV female adapter is used in residential and commercial drain, waste and vent systems
• For above-ground DWV
• Join ABS to standard male pipe threads using solvent (do not use primer with ABS)
• NSF/ANSI Standard 14
• UL Listed 94V-0
• NSF U.P. Certified
• "2 I.D. and 2.125 O.D."

Get a temporary cap for your sanitary vent and drainage pipe system with the NIBCO 2 in. ABS DWV MIPT Cleanout Plug. The plug is used with an ABS cleanout fitting (sold separately). ABS is lightweight, safe to handle and easy to install.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS should never be used with a primer
• Use in conjunction with an ABS cleanout fitting (sold separately)
• Temporarily caps the system
• Suitable for use in non-pressurized sanitary drain, waste and vent applications
• MIPT connection
• Maximum working pressure of 5 psi
• "2 I.D. and 2.125 O.D."

The NIBCO 2 in. ABS DWV cleanout test tee is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. The NIBCO 2 in. ABS DWV Hub x Hub x Cleanout Test Tee provides a cleanout opening and a plug. The tee is designed for use with non-pressurized sanitary systems.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS requires no primer
• Provides a cleanout opening and plug
• For use with non-pressurized sanitary systems
• Hub x hub x cleanout solvent-welded connections
• Maximum working pressure of 5 psi
• NSF/ANSI standard 14
• "2 I.D. and 2.125 O.D."

The NIBCO 1-1/2 in. ABS DWV Trap SPG x SJ Street Adapter is used in a non-pressurized sanitary system to adapt a fitting hub to a tubular trap at the floor or wall. Drain, Waste and Vent (DWV) allows removal of waste water and water-borne waste away from appliances and fixtures. ABS is lightweight, safe to handle and easy to install.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS plastic material
• For above-ground DWV
• ABS solvent welds to fitting hub and incorporates slip joint for tubular traps
• Do not use primer with ABS
• NSF/ANSI Standard 14
• UL Listed 94V-0
• "11/2 I.D. and 1.625 O.D."

The NIBCO ABS DWV long radius combination tee-wye is used in residential and commercial drain, waste and vent systems. The ABS DWV long radius combination tee-wye features a hub x hub x hub connection. The tee-wye allows for a connection to be made in continuous pipe line and branch out to a different direction. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS requires no primer
• Use when connecting a horizontal ABS branch line into a vertical ABS drain line
• Use for non-pressurized sanitary systems
• Removes waste water and waterborne wastes from plumbing fixtures and appliances
• Hub x hub x hub solvent-welded connections
• Maximum working pressure of 5 psi
• "3 I.D. and 3.125 O.D."

The NIBCO 3 in. x 2 in. ABS DWV flush bushing is used in residential and commercial drain, waste and vent systems. The ABS DWV flush bushing features a spigot x hub connection and provides a means for reducing the size of the line. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• ABS construction
• For non-pressurized sanitary drain, waste and vent systems
• Used to reduce pipe size by inserting into ABS sitting hub
• SPG x H connection type
• Solvent welded connection
• 5 psi maximum working pressure
• UL Listed 94V-0

The NIBCO 1-1/2 in. ABS DWV female adapter features a hub x female NPT thread connection and provides a means for adapting a solvent weld connection to a threaded connection. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO plastic fittings are backed by a 5-year limited warranty.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• The NIBCO 1-1/2 in. ABS DWV female adapter is used in residential and commercial drain, waste and vent systems
• For above-ground DWV
• Join ABS to standard male pipe threads using solvent (do not use primer with ABS)
• NSF/ANSI standard 14
• UL listed 94V-0
• NSF U.P. certified
• "11/2 I.D. and 1.625 O.D."

The ABS DWV 22-1/2 elbow features a spigot x hub connection and is used to change the direction of flow. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron using transition fittings.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Changes the direction of piping 22-1/2 degree
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• NSF/ANSI standard 14
• UL listed 94V-0
• "2 I.D. and 2.125 O.D."

The NIBCO 2 in. ABS DWV male adapter features a hub x male NPT thread connection and provides a means for adapting a solvent weld connection to a threaded connection. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO plastic fittings are backed by a 5-year limited warranty.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• The NIBCO 2 in. ABS DWV male adapter is used in residential and commercial drain, waste and vent systems
• For above-ground DWV
• Join ABS to standard female pipe threads using solvent (do not use primer with ABS)
• NSF/ANSI standard 14
• UL listed 94V-0
• NSF U.P. certified
• "2 I.D. and 2.125 O.D."

The NIBCO 2 in. x 1-1/2 in. x 2 in. ABS Hub x Hub x Hub Sanitary Tee helps connect a branch line into a vertical ABS drain line. The tee helps remove waste from plumbing fixtures and appliances. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 X 11/2 X 2 in. Inside Diameter and 2 1/8 X 1 5/8 X 2 1/8 in. Outside Diameter
• ABS requires no primer
• Connects a branch line into a vertical ABS drain line
• Use for non-pressurized sanitary systems
• Helps remove waste water and water-borne wastes from plumbing fixtures and appliances
• Hub x hub x hub solvent-welded connections
• Maximum working pressure of 5 psi
• "2 X 11/2 X 2 I.D. and 2 1/8 X 1 5/8 X 2 1/8 O.D."

The NIBCO 2 in. ABS DWV H x H x H Long-Radius Tee is designed for use with non-pressurized DWV systems. The tee has a maximum working pressure of 5 psi. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS requires no primer
• Connects a horizontal ABS branch line into a vertical ABS drain line
• For use with non-pressurized DWV systems
• H x H x H solvent-welded connections
• Maximum working pressure of 5 psi
• NSF/ANSI Standard 14
• "2 I.D. and 2.125 O.D."

The NIBCO 3 in. ABS DWV plug is used in residential and commercial drain, waste and vent systems. The ABS DWV plug features a male NPT thread connection to fit inside a fitting to seal the end of a pipe line or a location where future additions may be made to the piping system. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• ABS should never be used with a primer
• Use in conjunction with an ABS cleanout fitting (sold separately)
• Temporarily caps the system
• Suitable for use in non-pressurized sanitary drain, waste and vent applications
• MIPT connection
• Maximum working pressure of 5 psi
• "3 I.D. and 3.125 O.D."

Use the NIBCO 1-1/2 in. ABS DWV 22-1/2-Degree Spigot x Hub Elbow to subtly change the direction of ABS piping 22-1/2 degrees. The fitting features an ABS construction and is designed for use with DWV systems. BS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS construction
• Use with non-pressurized DWV systems to help remove wastewater from plumbing systems
• Helps air circulate in drainage piping
• Changes the direction of ABS piping 22-1/2 degree
• Solvent welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "11/2 I.D. and 1.625 O.D."

The NIBCO 4 in. x 4 in. x 2 in. ABS DWV 45 degree H x H x H Wye is a dependable addition to your ABS sanitary system. It joins a branch line to a horizontal drain line with solvent welds. ABS is lightweight, safe to handle and easy to install.

• 4 X 4 X 2 in. Inside Diameter and 4 1/8 X 4 1/8 X 2 1/8 in. Outside Diameter
• Made of ABS (black plastic)
• Connects an ABS branch line into a horizontal ABS drain line
• Solvent-welded connections
• Not for use with primer
• NSF/ANSI standard 14
• UL listed 94V-0
• "4 X 4 X 2 I.D. and 4 1/8 X 4 1/8 X 2 1/8 O.D."

The NIBCO 1-1/2 in. ABS DWV 22-1/2 degree Hub x Hub Elbow is built for use with DWV systems. Use the ABS fitting to redirect piping 22-1/2 degree s.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 22-1/2 degree
• Solvent welded connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi
• "11/2 I.D. and 1.625 O.D."

Use the NIBCO 4 in. x 3 in. ABS DWV 90 Hub x Hub Closet Elbow to change the direction or size of a pipe. The ABS DWV 90 degree water closet elbow features a spigot x hub connection and is specially designed to connect to the bottom of the closet flange. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 4 X 3 in. Inside Diameter and 4 1/8 X 3 1/8 in. Outside Diameter
• Do not use primer with ABS
• Use with drain, waste and vent systems to change the direction or size of a pipe
• Hub x hub connections
• Solvent-welded connections
• NSF/ANSI standard 14
• UL Listed 94V-0
• "4 X 3 I.D. and 4 1/8 X 3 1/8 O.D."

The NIBCO 4 in. ABS DWV Hub x Hub Coupling connects lengths of ABS piping use in DWV systems. Be sure, though, never to use a primer on ABS material before solvent cementing. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• 4 in. Inside Diameter and 4.125 in. Outside Diameter
• ABS construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Connects lengths of ABS piping
• Solvent weld connections
• Never use a primer with ABS
• Maximum working pressure of 5 psi