The Tectite by Apollo 1/2 in. Push-To-Connect x 3/8 in. O.D. Compression Quarter-Turn Angle Stop Valve is designed to control water flow to plumbing fixtures such as toilets and faucets. The Angle Stop Valve is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water off to the entire home. The 3/8 in. O.D. male compression outlet allows for the integration of supply lines for connection to the end fixture. Tectite by Apollo push-to-connect stop valves are the cleanest and simplest way to gain flow control on copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Stop valve removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo stop valves are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) chrome-plated brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper or CPVC pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 82
• Meets UPC, IPC, and cUPC standard requirements
• Demount clip allows for fitting removal (included)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The Tectite by Apollo 1/2 in. Push-To-Connect x 3/8 in. O.D. Compression Quarter-Turn Straight Stop Valve is designed to control water flow to plumbing fixtures such as toilets and faucets. The Straight Stop Valve is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water off to the entire home. The 3/8 in. O.D. male compression outlet allows for the integration of supply lines for connection to the end fixture. Tectite by Apollo push-to-connect stop valves are the cleanest and simplest way to gain flow control on copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Stop valve removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo stop valves are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) chrome-plated brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper or CPVC pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 81
• Meets UPC, IPC, and cUPC standard requirements
• Demount clip allows for fitting removal (included)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The Tectite by Apollo 1/2 in. Chrome-Plated Push-To-Connect x 1/2 in. MIP Quarter-Turn Angle Stop Valve is designed to control water flow to plumbing fixtures such as toilets and faucets. The Angle Stop Valve is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water off to the entire home. The 1/2 in. MIP outlet allows for the integration of supply lines for connection to the end fixture. Tectite by Apollo push-to-connect stop valves are the cleanest and simplest way to gain flow control on copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Stop valve removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo stop valves are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) chrome-plated brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper or CPVC pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 84
• Meets UPC, IPC, and cUPC standard requirements
• Demount clip allows for fitting removal (included)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The Tectite by Apollo 1/2 in. Push-To-Connect x 1/4 in. O.D. Compression Quarter-Turn Angle Stop Valve is designed to control water flow to plumbing fixtures such as toilets and faucets. The Angle Stop Valve is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water off to the entire home. The 1/4 in. O.D. compression outlet allows for the integration of supply lines for connection to the end fixture. Tectite by Apollo push-to-connect stop valves are the cleanest and simplest way to gain flow control on copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Stop valve removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo stop valves are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) chrome-plated brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper or CPVC pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 79
• Meets UPC, IPC, and cUPC standard requirements
• Demount clip allows for fitting removal (included)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The Tectite by Apollo 1/2 in. Push-To-Connect x 1/4 in. O.D. Compression Quarter-Turn Straight Stop Valve is designed to control water flow to plumbing fixtures such as toilets and faucets. The Straight Stop Valve is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water off to the entire home. The 1/4 in. O.D. compression outlet allows for the integration of supply lines for connection to the end fixture. Tectite by Apollo push-to-connect stop valves are the cleanest and simplest way to gain flow control on copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Stop valve removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo stop valves are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) chrome-plated brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper or CPVC pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 80
• Meets UPC, IPC, and cUPC standard requirements
• Demount clip allows for fitting removal (included)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The Tectite by Apollo Tee Stop Valve allows for the simple integration of a new plumbing line for running a line from the 3/8 in. Compression line to an end fixture. It is ideal for the addition of ice makers and humidifier supply lines to new or existing systems. The quarter turn ball valve allows for complete flow control. Tectite by Apollo push-to-connect stop valves are the cleanest and simplest way to gain flow control on copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Stop valve removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo stop valves are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) chrome-plated brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper or CPVC pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 85
• Meets UPC, IPC, and cUPC standard requirements
• Demount clip allows for fitting removal (included)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The Tectite by Apollo 1/2 in. Push-To-Connect x 1/4 in. Push-To-Connect Quarter-Turn Angle Stop Valve is designed to control water flow to plumbing fixtures such as toilets and faucets. The Angle Stop Valve is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water off to the entire home. The 1/4 in. Push-To-Connect outlet allows you to use a 1/4 in. piece of ApolloPEX Pipe and a Tectite by Apollo 1/4 in. fixture fitting to create a custom length supply line to the end fixture. Simply cut the PEX to length, push end into stop valve and push fitting on to other end and screw into fixture. Tectite by Apollo push-to-connect stop valves are the cleanest and simplest way to gain flow control on copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Stop valve removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo stop valves are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) chrome-plated brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper or CPVC pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 78
• Meets UPC, IPC, and cUPC standard requirements
• Demount clip allows for fitting removal (included)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The Tectite by Apollo 1/2 in. Push-To-Connect x 1/4 in. Push-To-Connect Quarter-Turn Straight Stop Valve is designed to control water flow to plumbing fixtures such as toilets and faucets. The Straight Stop Valve is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water off to the entire home. The 1/4 in. Push-To-Connect outlet allows you to use a 1/4 in. piece of PEX Pipe and a Tectite by Apollo 1/4 in. fixture fitting to create a custom length supply line to the end fixture. Simply cut the PEX to length, push end into stop valve and push fitting on to other end and screw into fixture. Tectite by Apollo push-to-connect stop valves are the cleanest and simplest way to gain flow control on copper, CPVC, PE-RT and ApolloPEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Stop valve removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo stop valves are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) chrome-plated brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper or CPVC pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 77
• Meets UPC, IPC, and cUPC standard requirements
• Demount clip allows for fitting removal (included)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The Tectite by Apollo 3/4 in. Brass Push-To-Connect Stop Valve with Drain is the fastest, cleanest and simplest way to install or replace a valve on copper, CPVC, PE-RT and PEX piping systems without the use of tools, solder, open flame or glue. It allows for simple control of water flow in hydronic and potable water systems and the side vent allows for the expulsion of air or water for testing, repair or weatherization situations. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, valves may be rotated for simpler installation in tight spaces.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
• Push-to-connect design allows for a simple and fast installation on any combination of copper or CPVC pipe
• Corrosion resistant for greater longevity
• Demount clip allows for fitting removal (sold separately)
• Meets UPC, IPC, and cUPC standard requirements
• NSF listed
• Ideal for potable water and hydronic heating applications
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The Tectite by Apollo Tee Stop Valve allows for the simple integration of a new plumbing line for running a line from the 3/8 in. Compression line to an end fixture. It is ideal for the addition of ice makers and humidifier supply lines to new or existing systems. The quarter turn ball valve allows for complete flow control. Tectite by Apollo push-to-connect stop valves are the cleanest and simplest way to gain flow control on copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Stop valve removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo stop valves are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) chrome-plated brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper or CPVC pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 86
• Meets UPC, IPC, and cUPC standard requirements
• Demount clip allows for fitting removal (included)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The Tectite by Apollo 1/2 in. Push-To-Connect x 3/8 in. O.D. Compression Quarter-Turn Straight Stop Valve is designed to control water flow to plumbing fixtures such as toilets and faucets. The Angle Stop Valve is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water off to the entire home. The 3/8 in. O.D. male compression outlet allows for the integration of supply lines for connection to the end fixture. Tectite by Apollo push-to-connect stop valves are the cleanest and simplest way to gain flow control on copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Stop valve removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo stop valves are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) chrome-plated brass for superior reliability
• Push-to-connect design allows for a simple and fast installation on any combination of copper or CPVC pipe
• Corrosion resistant for greater longevity
• Approved for behind-the-wall with no access and burial
• Demount clip allows for fitting removal (sold separately)
• Fittings can be rotated after being installed for ease of use in tight spaces
• 1/2 in. push-to-connect x 3/8 O.D. male compression connections
• Listed by IAPMO and listed to ASSE 1061/NSF 61
• Meets UPC, IPC, and cUPC standard requirements
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The Tectite by Apollo 1/2 in. Brass Push-To-Connect Stop Valve with Drain is the fastest, cleanest and simplest way to install or replace a valve on copper, CPVC, PE-RT and PEX piping systems without the use of tools, solder, open flame or glue. It allows for simple control of water flow in hydronic and potable water systems and the side vent allows for the expulsion of air or water for testing, repair or weatherization situations. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, valves may be rotated for simpler installation in tight spaces.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
• Push-to-connect design allows for a simple and fast installation on any combination of copper or CPVC pipe
• Corrosion resistant for greater longevity
• Demount clip allows for fitting removal (sold separately)
• Meets UPC, IPC, and cUPC standard requirements
• NSF listed
• Ideal for potable water and hydronic heating applications
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The Tectite by Apollo 1/2 in. Push-To-Connect x 1/2 in. MNPT Quarter-Turn Straight Stop Valve is designed to control water flow to plumbing fixtures such as toilets and faucets. The Straight Stop Valve is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water off to the entire home. The 1/2 in. MNPT outlet allows for the integration of supply lines for connection to the end fixture. Tectite by Apollo push-to-connect stop valves are the cleanest and simplest way to gain flow control on copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Stop valve removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo stop valves are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) chrome-plated brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper or CPVC pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 83
• Meets UPC, IPC, and cUPC standard requirements
• Demount clip allows for fitting removal (included)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The Tectite by Apollo 1/2 in. Brass Push-To-Connect x 3/8 in. O.D. Compression Dual Opposed Outlet Dual Shut-Off Quarter-Turn Stop Valve allows for the simple integration of a new plumbing line for running a line from the 1/4 in. Compression line to an end fixture. It is ideal for the addition of ice makers and humidifier supply lines to new or existing systems. The quarter turn ball valves allow for independent flow control of each outlet. Tectite by Apollo push-to-connect stop valves are the cleanest and simplest way to gain flow control on copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Stop valve removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, valve may be rotated for simpler installation in tight spaces. All Tectite by Apollo stop valves are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability
• Outlet connections are 3/8 in. O.D. male compression fits most common faucet and dishwasher supply lines, risers, or tubing
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 61
• Meets UPC, IPC, and cUPC standard requirements
• Demount clip allows for fitting removal (included)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F
• Chrome-plated brass ball

The Tectite by Apollo 1/2 in. Push-To-Connect x 3/8 in. O.D. Compression Quarter-Turn Angle Stop Valve is designed to control water flow to plumbing fixtures such as toilets and faucets. The Angle Stop Valve is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water off to the entire home. The 3/8 in. O.D. male compression outlet allows for the integration of supply lines for connection to the end fixture. Tectite by Apollo push-to-connect stop valves are the cleanest and simplest way to gain flow control on copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Stop valve removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo stop valves are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) chrome-plated brass for superior reliability
• Push-to-connect design allows for a simple and fast installation on any combination of copper or CPVC pipe
• Corrosion resistant for greater longevity
• Approved for behind-the-wall with no access and burial
• Demount clip allows for fitting removal (sold separately)
• Fittings can be rotated after being installed for ease of use in tight spaces
• 1/2 in. push-to-connect x 3/8 O.D. male compression connections
• Listed by IAPMO and listed to ASSE 1061/NSF 61
• Meets UPC, IPC, and cUPC standard requirements
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The Tectite by Apollo 1/2 in. Brass Push-To-Connect x 3/8 in. OD Compression Dual Inline Outlet Dual Shut-Off Quarter-Turn Stop Valve allows for the simple integration of a new plumbing line for running a line from the 1/4 in. Compression line to an end fixture. It is ideal for the addition of ice makers and humidifier supply lines to new or existing systems. The quarter turn ball valve allows for complete flow control. Tectite by Apollo push-to-connect stop valves are the cleanest and simplest way to gain flow control on copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Stop valve removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo stop valves are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability
• Outlet connections are 3/8 in. O.D. male compression fits most common faucet and dishwasher supply lines, risers, or tubing
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 61
• Meets UPC, IPC, and cUPC standard requirements
• Demount clip allows for fitting removal (included)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F
• Chrome-plated brass ball

The Tectite by Apollo 3/4 in. Brass Push-to-Connect x 3/4 in. Garden Hose Thread Garden Valve with Drop Ear is an ideal choice for residential and commercial irrigation applications. The integrated mounting plate allows the valve to be secured to a structural component to ensure proper pipe alignment and security. In addition, the bent outlet design provides a positive shut-off and convenient hose end connection on vertical irrigation piping. The outlet is designed to fit most 3/4 in. garden hose connections. Tectite by Apollo push-to-connect fittings are the cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Valve can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 64
• Meets UPC, IPC, and cUPC standard requirements
• Demount clip allows for valve removal (sold separately)
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F