The NIBCO lead-free brass ball valve provides ease of operation with quarter-turn (90 degree ) open to close. The 2-piece valve features threaded end connections for easy installation. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO ball valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO specialty valves are backed by a NIBCO INC. 2-year limited warranty.

• 3/4 in. Inside Diameter and 0.875 in. Outside Diameter
• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure (1/4 in. to 2 in.)
• Valve pressure rating 400 psi/27.6 bar non-shock cold working pressure (2-1/2 in. to 4 in.)
• Full port
• Blowout-proof stem
• Threaded end connections
• Standard lever handle
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
• CSA ANSI Z21.15/CSA 9.1 (1/4 in. to 4 in.)
• CSA ASME B16.33: 125 psi (maximum) (1/4 in. to 4 in.)
• CSA CAN/CGA 3.16 (1/4 in. to 4 in. )
• CSA CGA CR91-002: 1/2 psi, 2 psi, and 5 psi (1/4 in. to 4 in.)
• UL 1477 (YQNZ): compressed gas shutoff valves - 250 psi (1/4 in. to 4 in.)
• UL 842 (YRBX): flammable liquid shutoff valves - 250 psi (1/4 in. to 4 in.)
• UL 842 (YRPV): gas shutoff valves - 250 psi (1/4 in. to 4 in.)
• UL 842 (MHKZ): manual valves - 250 psi (1/4 in. to 4 in.)
• UL 125 (YSDT): LP-gas shutoff valves - 250 psi (1/4 in. to 4 in.)

The NIBCO lead-free, brass ball valve with solder end connections provides bubble-tight shutoff. The valve's PTFE seats and lead-free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water applications. The NIBCO brass ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features solder end connections for easy installation.

• 3/4 in. Inside Diameter and 0.875 in. Outside Diameter
• Lead free
• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
• Full port
• Blowout-proof stem
• Standard lever handle
• Female solder cup end connections
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157

The NIBCO lead-free brass ball valve with threaded end connections provides bubble-tight shutoff. The valve's PTFE seats and lead free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water and gas applications. The NIBCO lead-free brass ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded end connections for easy installation.

• Lead free
• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
• Full port
• Blowout-proof stem
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
• CSA ANSI Z21.15 / CSA 9.1
• CSA ASME B16.44: 5 psig (maximum)
• CSA ASME B16.33: 125 psig (maximum)
• CSA CAN / CGA 3.16
• CSA CGA CR91-002: 1/2 psig, 2 psig and 5 psig (1/4 in. to 4 in. )
• FM 1140 approved 175 wwp
• UL 1477 (YQNZ): compressed gas shutoff valves 250 psi
• UL 842 (YRBX): flammable liquid shut off valves 250 psi
• UL 842 (YRPV): gas shutoff valves 250 psi
• UL subject 258 (VQGU): trim and drain valves

The NIBCO lead-free* brass ball valve with threaded end connections provides bubble-tight shutoff. The valve's PTFE seats and lead free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water and gas applications. The NIBCO lead-free brass ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded end connections for easy installation. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO ball valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO specialty valves are backed by a NIBCO INC. 2-year limited warranty.

• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure (1/4" to 2")
• Valve pressure rating 400 psi/27.6 bar non-shock cold working pressure (2-1/2" to 4")
• Full port
• Blowout-proof stem
• Threaded end connections
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
• CSA ANSI Z21.15 / CSA 9.1 (1/4" to 4")
• CSA ASME B16.44: 5 psig (maximum) (1/4" to 4") / CSA ASME B16.33: 125 psig (maximum) (1/4" to 4")
• CSA CAN / CGA 3.16 (1/4" to 4")
• CSA CGA CR91-002: 1/2 psig, 2 psig, and 5 psig (1/4" to 4")
• FM 1140 approved 175 wwp
• UL 1477 (YQNZ): Compressed gas shutoff valves 250 psi (1/4" to 4") / UL 842 (YRBX): Flammable liquid shutoff valves 250 psi (1/4" to 4")
• UL 842 (YRPV): Gas shutoff valves 250 psi (1/4" to 4") / UL 842 (MHKZ): Manual valves 250 psi (1/4" to 4")
• UL 125 (YSDT): LP-Gas shutoff valves 250 psi (1/4" to 4")
• UL Subject 258 (VQGU): Trim and drain valves (1/4" to 2")
• Size range 1/4" to 4"

The NIBCO lead-free. brass ball valve provides ease of operation with quarter-turn (90 degree ) open to close. The 2-piece valve features solder end connections for easy installation. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO ball valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO specialty valves are backed by a NIBCO INC. 2-year limited warranty.

• 1/2 in. Inside Diameter and 0.625 in. Outside Diameter
• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure (3/8 in. to 2 in.)
• Valve pressure rating 400 psi/27.6 bar non-shock cold working pressure (2-1/2 in. to 3 in.)
• Full port
• Blowout-proof stem
• Standard lever handle
• Female solder cup end connections
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
• "1/2 I.D. and 0.625 O.D."

The NIBCO lead-free, brass ball valve with solder end connections provides bubble-tight shutoff. The valve's PTFE seats and lead-free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water applications. The NIBCO brass ball valve provides ease of operation with quarter-turn (90 degree ) open to close. The two-piece valve features solder end connections for easy installation.

• Lead free
• Full port
• Blowout-proof stem
• Standard lever handle
• Female solder cup end connections
• NSF/ANSI-61-8
• NSF/ANSI-372
• UPC-IGC-157

The NIBCO lead-free, brass ball valve with solder end connections provides bubble-tight shutoff. The valve's PTFE seats and lead-free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water applications.

• Lead free
• Full port
• Blowout-proof stem
• Standard lever handle
• Female solder cup end connections
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372
• Valve pressure rating 600 psi/41.4 in. bar non-shock cold working pressure (3/8 in. to 2 in.)

The NIBCO lead-free, brass ball valve with solder end connections provides bubble-tight shutoff. The valve's PTFE seats and lead-free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water applications.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• Full port
• Blowout-proof stem
• Female solder cup end connections
• CSA certified to ASME B16.44
• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
• Standard lever handle
• "11/2 I.D. and 1.625 O.D."

The NIBCO lead-free brass ball valve with threaded end connections provides bubble-tight shutoff. The valve's PTFE seats and lead free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water and gas applications.

• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
• Full port
• Threaded end connections
• Blowout-proof stem
• Lead free
• IAPMO Listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
• CSA ANSI Z21.15 / CSA 9.1
• CSA ASME B16.44: 5 psig (maximum)
• CSA ASME B16.33: 125 psig (maximum)
• CSA CAN / CGA 3.16
• CSA CGA CR91-002: 1/2 psig, 2 psig, and 5 psig
• FM 1140 approved 175 wwp
• UL 1477 (YQNZ): compressed gas shutoff valves 250 psi
• UL 842 (YRBX): flammable liquid shutoff valves 250 psi
• UL 842 (YRPV): gas shutoff valves 250 psi
• UL 842 (MHKZ): manual valves 250 psi
• UL 125 (YSDT): LP-gas shutoff valves 250 psi
• UL subject 258 (VQGU): trim and drain valves

SharkBite Push-to-connect ball valve is the easiest way to install a new or replacement shut-off ball valve. The single lever quarter-turn control allows for easy operation and the valve is perfect for potable water and hydronic applications where a shut-off is needed. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the valve after installation. Removing the valve is just as fast using a disconnect tool so the valve can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.

• Compatible with PEX, copper, CPVC, PE-RT, and HDPE pipe
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 200 degrees Fahrenheit and 200 PSI
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 25-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• 5-Year warranty when used with SDR-9 HDPE pipe
• Meets all UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi
• 3/4 in. Pipe Insertion Depth = 1-1/8 in.

SharkBite Push-to-connect ball valve is the easiest way to install a new or replacement shut-off ball valve. The single lever quarter-turn control allows for easy operation and the valve is perfect for potable water and hydronic applications where a shut-off is needed. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the valve after installation. Removing the valve is just as fast using a disconnect tool so the valve can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.

• Compatible with PEX, copper, CPVC, PE-RT, and HDPE pipe
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 200 degrees Fahrenheit and 200 PSI
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 25-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• 5-Year warranty when used with SDR-9 HDPE pipe
• Meets all UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi
• 1/2 in Pipe Insertion Depth = 15/16 in.

The 3/4 in. barb x 3/4 in. barb brass fitting provides contractors with speedy installation and cost savings that is perfect for commercial or residential applications. The versatile construction can be uses to either isolate a fixture or main line for easy maintenance and repairs. The lead-free eco-brass construction delivers dependability and peace of mind for building owners. High-temp and freeze-resistant materials allows for adaptation to hot and cold-water applications for PEX systems.

• High-temp and freeze-resistant materials adapt to both hot and cold water applications for PEX systems
• Versatile brass valve can be used to either isolate a fixture or main line for easy maintenance and repairs
• Cooper construction holds up to years of use and ensures sanitation
• Pressure ratings of up to 80 PSI at 200 degree F handles the high demand of commercial usage
• NSF 61 certified
• 25-years warranty proven to last the lifetime of the building

The NIBCO lead-free brass ball valve with threaded end connections provides bubble-tight shutoff. The valve's PTFE seats and lead free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water and gas applications. The NIBCO lead-free brass ball valve provides ease of operation with quarter-turn (90) open to close. The 2-piece valve features threaded end conn.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• Lead free, full port
• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
• Blowout-proof stem
• UL subject 258 (VQGU): trim and drain valves
• CSA ANSI Z21.15 / CSA 9.1
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
• CSA ASME B16.44: 5 psig (maximum)
• CSA ASME B16.33: 125 psig (maximum)
• CSA CAN / CGA 3.16 (1/4 in. to 4 in.)
• CSA CGA CR91-002: 1/2 psig, 2 psig, and 5 psig
• FM 1140 approved 175 wwp
• UL 1477 (YQNZ): compressed gas shutoff valves 250 psi
• UL 842 (YRBX): flammable liquid shutoff valves 250 psi
• UL 842 (YRPV): gas shutoff valves 250 psi
• UL 842 (MHKZ): manual valves 250 psi
• UL 125 (YSDT): LP-gas shutoff valves 250 psi

The NIBCO lead-free brass ball valve with threaded end connections provides bubble-tight shutoff. The valve's PTFE seats and lead free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water and gas applications.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• NIBCO lead-free brass ball valve provides ease of operation with quarter-turn (90 degree ) open to close
• Full port design, blowout-proof stem
• CSA ANSI Z21.15 / CSA 9.1
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
• CSA ASME B16.33: 125 psig (maximum)
• CSA ASME B16.44: 5 psig (maximum)
• CSA CAN/CGA 3.16
• CSA CGA CR91-002: 1/2 psig, 2 psig, and 5 psig
• FM 1140 approved 175 WWP
• UL 1477 (YQNZ): compressed gas shutoff valves 250 psi
• UL 842 (YRBX): flammable liquid shut-off valves 250 psi
• UL 842 (YRPV): gas shutoff valves 250 psi
• UL 842 (MHKZ): manual valves 250 psi
• UL 125 (YSDT): LP-gas shutoff valves 250 psi
• UL subject 258 (VQGU): trim and drain valves

The 1/2-inch barb x 1/2-inch barb brass fitting provides contractors with speedy installation and cost savings that is perfect for commercial or residential applications. The versatile construction can be uses to either isolate a fixture or main line for easy maintenance and repairs. The lead-free eco-brass construction delivers dependability and peace of mind for building owners. High-temp and freeze-resistant materials allows for adaptation to hot and cold water applications for PEX systems.

• High-temp and freeze-resistant materials adapt to both hot and cold water applications for PEX systems
• This versatile brass valve can be used to either isolate a fixture or main line for easy maintenance and repairs
• Cooper construction holds up to years of use and ensures sanitation
• Pressure ratings of up to 80 PSI at 200 degrees Fahrenheit handles the high demand of commercial usage
• NSF 61 certified
• 25-year warranty proven to last the lifetime of the building