Charging Hoses & Accessories
Kobra series gasket seal quarter-turn ball valve hose set.Includes 3/8 in. black hose 1/4 in. x 1/4 in. with ball valve.Meets non-venting requirements by trapping refrigerant with ball valve.
- 60 in. ball valve hose set B/Y/R and 3/8 in. black hose
- Kobra gasket seal quarter-turn
- Meets non-venting requirement
- 800 psi working, 4000 psi burst
Kobra high pressure hoses. Series has gasket seal fitting, the depressor is set to ARI standard for the access valve core, and blow-out resistant depressor and barrel gasket. Pressure rating 800 psi and 4000 psi burst. Suitable for R-410A.
- Gasket seal hose
- High pressure charging hose set suitable for R-410A
- Blow-out resistant gasket locks into cup of fitting
- Barbed depressor to guide the valve core into place
Kobra secure seal 60 in. hose three pack, black, yellow and red hoses. 800 psi working; 400 psi burst. UL R410A approved Secure Seal, specially designed to lock refrigerant inside the hose without the need for a ball valve attachment.
- Secure seal hose set
- 800 psi working pressure
- 4000 psi burst
- UL R410A approved
- Field repairable
Core Removal Tool with access port. Specifically designed to valve off the system to remove valve cores, this core remover has a access port. The valve core can be completely removed and replaced without losing system charge.
- Removing valve core without losing system charge
- Quick connect 1/4 in., flare run 1/4 in., side port 1/4 in.
- Features a quarter turn ball valve shut-off fitting and o-ring seals
- Speed up evacuation, recovery, or recharging time through the full flow port
CL-72R 1/4 in.' Standard Charging Hose - Red 72 in.. With a pressure rating 750 psi working and 3000 psi burst. Premeation can be detected and will vary with refrigerant type and time of exporure.
- Coated for flexibility and wear resistance
- Knurled brass nut for easy finger tightening
- Color coded for convenience
- Ideal for use with all standard refrigerants (except high pressure refrigerants)
All fittings feature safety grooves to prevent back spray. With a pressure rating of 800 psi working, 4000 burst, these hoses can be used with common refrigerants except ammonia. Nitrile cover is more resistant to oil so your hoses last longer. Automatically traps refrigerant discharge in the hose. 36 in. Seal right charging hose. Min. Order: 1 EA.
- Secure seal hose
- 800 psi working
- 4000 psi burst
- UL 410A approved
Specifically designed to valve off the system to remove valve cores. Features a quarter turn ball valve shut-off fitting and O-ring seals. The valve core can be completely removed and replaced without losing system charge. Speed up evacuation, recovery or recharging time through the full flow port. Storage area houses spare valve cores.
- Core removal tool with port
- Quarter turn ball valve shutoff
- Quick connect 5/16 in., flare run 1/4 in., side port 1/4 in.
- Vacuum rated to 20 microns
- Fits M2 series only
- Includes two hand wheels with screws, two stems, two nuts, two pistons with seats and O-rings
JB Industries Pressure Gauge for R32/R454B/R410A – 3†Illuminating
- Tough, Impact-Resistant Zytel Casing With Over 10,000 Pound Tensile Strength
- Internal "breathing diaphragm" that eliminates air bubbles which can distort the reading
- Seal on the internal diaphragm prevents freezing and corrosion
- 3-1/8" (80mm)
- 30" vacuum, 0 to 500 psi
- Class 1, 1% accuracy
- 1/8" MPT fitting
- Mfg #M2-862
- Tough, Impact-Resistant Zytel Casing With Over 10,000 Pound Tensile Strength
- Internal "breathing diaphragm" that eliminates air bubbles which can distort the reading
- Seal on the internal diaphragm prevents freezing and corrosion
- 3-1/8" (80mm)
- 1/4" Standard Charging Hose - Blue 72"
- 750 psi working, 3,000 psi burst
- Use with all standard refrigerants (no high pressure refrigerants)
