Searched for "47121600"
Make dilution delivery with the TruFill Dispensing System easy with the TruFill hose. Simply hook-up directly to your water source and attach to the TruFill dispenser head with the quick connect adapter. Use along with the TruFill Dispensing System head and cartridges.
- 3/4 in. Dia x 6 ft.
- Delivers up to 4 GPM
- Quick connect adapter
- Hose hook up kit for TruFill dispenser
Tornado Lithium Iron Phosphate Battery Microburst Scrubber. For Use In The Tornado Ts040-W17-U Microburst Scrubber. Lithium Iron Phosphate (Lifepo4) Batteries Are Thermally Stable And Etl Listed. Provide Up To 2 Hours Of Run Time And Can Be Charged In Under 3 Hours. Higher Charging Cycle Count Over Traditional Lithium Batteries. Supports Convenience Charging With No Memory Effect. Greater Operating Temperature Range. Mfg #MB027
- For Use In The Tornado Ts040-W17-U Microburst Scrubber
- Lithium Iron Phosphate (Lifepo4) Batteries Are Thermally Stable And Etl Listed.
- Provide Up To 2 Hours Of Run Time And Can Be Charged In Under 3 Hours.
- Higher Charging Cycle Count Over Traditional Lithium Batteries.
Replacement battery for QUICKBOOST Cordless Upright Vacuum SC7500A. 1 replacement battery, with a charge time of 2.5-hours. Run time is up to 47-minutes, based on hard surface testing.
- Replacement battery
- For use in quickboost cordless upright vacuum SC7500A
- Contains 1-battery
- Up to 47-minutes run time (results based on hard surface testing)
Namco 12 in. Heavy Duty Floor Wand for Water Extraction. Constructed from Stainless Steel to ensure no rusting. Universal compatibility with all Carpet Extractors. Up to 300 psi capability for maximum power. Adjustable handle for ultimate comfort. Easy glide on all carpet types and textures. 12 in. Wand Width.
- NAMCO 12 in. floor wand for water extraction
- Constructed from stainless steel to ensure no rusting
- Universal compatibility with all carpet extractors
- Up to 300 psi capability for maximum power
- Adjustable handle for ultimate comfort
- Easy glide on all carpet types and textures
- 12 in. wand width
Electric Bucket Heater can heat water to over 180 degree . Use to heat water for carpet cleaning and carpet dying for best cleaning results. 1200-Watt of power. Comes complete with stainless steel guard. Will not damage plastic containers. Great for use in 5 gal. to 55 gal. buckets.
- Electric bucket heater can heat water to over 180 degree
- 1200-Watt of power
- Comes complete with stainless steel guard
- Use to heat water for carpet cleaning and carpet dying for best cleaning results
- Will not damage plastic containers
- Great for use in 5 Gal. - 55 Gal. buckets
Upholstery and Stair Cleaning Tool is constructed of Stainless Steel. The perfect accessory tool to clean upholstery, stairs, and drapes. Universal compatibility with all carpet extraction and vacuum machines. 3 in. Cleaning width.
- Cleaning tool for upholstery, auto detailing, and fabric cleaning
- Universal compatibility with all carpet extraction and vacuum machines
- 3 in. cleaning width
- Attaches directly to vacuum hose and solution hose
- Stainless steel construction ensures lasting durability
Paper bag fits the any Sanitaire Upright Bagged Vacuum 5700 or 5800 series, including SC5713A. Incorporated allergen filtration makes sure no dust or debris escape. Dust bag is easy to change, sliding into place. Capacity is 4.5 Qt.
- Incorporated allergen filtration makes sure no dust or debris escape
- Easy-to-install design allows fast replacement for immediate use
- For use with Sanitaire upright bagged vacuum 5700
- Also works in 5800 series, including SC5713A
The hour meter is a great way to track total man-hours spent using Square Scrub machines. Simple to install, the hour meter can allow for better budgeting of labor spent resurfacing floors. The hour meter works with any 20 in. or 28 in. Square Scrub machine.
- Track total man-hours spent
- Hour meter can allow for better budgeting of labor spent resurfacing floors
- Works with any 20 in. or 28 in. Square Scrub machine
- Simple to install
Tension Handle Assembly for Square Scrub machines. Compatible with all 18 in., 20 in. and 28 in. Square Scrub Pivot machines. The 3/8 in. Tension Handle Assembly is also compatible with older style Square Scrub machines with serial numbers 32U11326 or greater.
- Tension handle assembly
- Compatible with all 18 in., 20 in., and 28 in. Square Scrub pivot machines
- Compatible with older style Square Scrub machines with serial numbers 32U11326 or greater
- Locks handle into different positions
The axle collar replacement for Square Scrub machines. Compatible with 18 in., 20 in. and 28 in. Square Scrub machines. Contains 1 axle collar.
- Axle collar replacement for Square Scrub machines
- Holds wheel in place
- Box contains 1 axle collar
- Compatible with EBG 18 in., 20 in. and 28 in. machines
Replacement wheel for all 20 in. and 28 in. EBG-Series machines. 6 in. Dia non marking.
- Compatible with Square Scrub machines
- Replaces wheel for all 20 in. and 28 in. EBG-series machines
- 6 in. Dia
- Non-marking
This kit is for the Square Scrub EBG-28. The Isolator Repair Kit has been created to make this standard maintenance process easier. Items include: grip face, 4 isolators, required hardware needed for repair and Loctite.
- Fits Square Scrub EBG-28
- Makes standard maintenance process easier
- Include: grip face, 8 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts and motor washer
- Also includes 100% silicone and Loctite
This is the Base Plate Assembly Kit for the Doodle Scrub. The Base Plate Assembly Kit includes: 4 isolators, 4 washers, 4 isolator top screws, 4 isolator bottom screws, 4 motor bolts, 4 cover screws, 4 cover washers, aluminum driver plate, eccentric assembly, motor shaft bolt, eccentric assembly key and a crush washer. Also a grip face, thread lock, anti-seize and 100% silicone are provided.
- Base plate assembly kit for the Doodle Scrub
- Kit includes: 4 isolators, 4 washers, 4 isolator top screws, 4 isolator bottom screws, 4 motor bolts, 4 cover screws, 4 cover washers, aluminum driver plate, eccentric assembly, motor shaft bolt, eccentric assembly key and a crush washer
- Also a grip face, thread lock, anti-seize and 100% silicone are provided
- Parts provided by Square Scrub
The Isolator Replacement Kit fits the Doodle Mop. The Isolator Replacement Kit includes: 4 isolators, 4 washers, 4 isolator top screws, 4 isolator bottom screws, 4 cover screws, 4 cover washers. Also includes a new grip face and thread lock.
- Fits the doodle mop
- Includes: 4 isolators, 4 washers, 4 isolator top screws, 4 isolator bottom screws, 4 cover screws, 4 cover washers, also includes a new grip face and thread lock
- Also includes a new grip face and thread lock
- Provided by Square Scrub
Wiring Harness Replacement Kit from Square Scrub. The Wiring Harness Replacement Kit replaces the wiring harness for the Doodle Scrub and Doodle Mop. The Wiring Harness Replacement Kit includes: wiring harness, 2 wire connectors, motor ground screw and 4 cover screws.
- Harness replacement kit replaces the wiring harness for the Doodle Scrub and doodle mop
- Kit includes: wiring harness, 2 wire connectors, motor ground screw and 4 cover screws
- Kit contains everything you need to replace the wiring harness
- Replacement parts from Square Scrub
This is the right handle adjustment bar for Square Scrub machines. It is compatible with all 18 in., 20 in. and 28 Square Scrub Pivot machines. Side bar for hardware used to adjust the handle height.
- Handle adjustment bar for Square Scrub machines
- Compatible with all 18 in., 20 in. and 28 in. Square Scrub pivot machines
- Side bar for hardware used to adjust the handle height
- For right side
The Weight Bolt Kit has been created to make this standard maintenance process easier. This kit fits the EBG-28 Pivot. Items include: grip face, 4 weight bolts, 8 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts, 100% silicone and Loctite.
- For Square Scrub EBG-28 pivot
- Makes maintenance process easier
- Contains grip face, 4 weight bolts, 8 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts
- 100% silicon and Loctite are included
Our Dust Containment Kit adds another dimension in controlling indoor airborne particles during dry stripping. Easy to install. Fits any Square Scrub machine built.
- Controls indoor airborne particles
- Use while dry stripping or sanding
- Easy to install
- Includes: adhesive strip and VELCRO
An air scrubber is one of the most advanced and important tools a water damage restoration professional can have in their collection of equipment. An air scrubber requires regular maintenance to perform at its peak.The addition of the DOP filter makes the RA-650 a high efficiency three-stage air filtration unit, ready for any sensitive job requiring first-pass HEPA filtration. With the standard pre-filter, DOP Stage 2 pre-filter and the HEPA primary filter installed, the RA-650 passes laboratory DOP testing conducted per ANSI standards, achieving an efficiency rating of 99.97% against oily aerosol particles down to 0.3 microns.
- Passes laboratory DOP testing when installed as part of 3-stage filtration process
- Equips the RA-650 for a wide range of environments that require first-pass high efficiency air filtration
- Achieves an efficiency rating of 99.97% against oily aerosol particles down to 0.3 microns
- The addition of the DOP filter makes the RA-650 a high efficiency 3-stage air filtration unit, ready for any sensitive job requiring first-pass HEPA filtration
This kit contains everything needed to replace the eccentric assembly for the EBG-20/C Pivot. When replacing, Square Scrub recommends installing new isolators as well. Included are: 4 isolators, isolator bolts, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key, grip face, anti-seize and 100% silicone.
- Fits EBG-20/C pivot
- Contains everything needed to replace the eccentric assembly
- Included are: 4 isolators, isolator bolts, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key and grip face
- Also includes anti-seize and 100% silicone
The heavy-duty Velcro grip face is a vital part of your Square Scrub machine. The grip face is used to securely hold the pad in place. Replace when the teeth on the Grip Face are worn.
- Holds pad in place during use
- Replaces grip face on the doodle mop
- Heavy-duty grip
- Long life
Fits the Doodle Scrub by Square Scrub. The heavy-duty Velcro grip face is a vital part of your Square Scrub machine. Replace when the teeth on the Grip Face are worn.
- Fits the Doodle Scrub by Square Scrub
- Heavy-duty Velcro
- Holds pad in place
- Replace when the teeth are worn
This kit contains everything needed to replace the eccentric assembly for the EBG-28 Pivot. When replacing, Square Scrub recommends installing new isolators as well. Included are: aluminum driver plate, 8 isolators, isolator bolts, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key, grip face, anti-seize and 100% silicone.
- Fits EBG-28 pivot by Square Scrub
- Contains everything needed to replace the eccentric assembly for the EBG-28 pivot
- Includes: aluminum driver plate, 8 isolators, isolator bolts, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key, grip face
- Also includes anti-size and 100% silicone
This kit is for the Doodle Scrub by Square Scrub. The Isolator Replacement Kit includes: 4 isolators, 4 washers, 4 isolator top screws, 4 isolator bottom screws, 4 cover screws, 4 cover washers. Also, a new grip face and thread lock.
- Compatible with the doodle scrub by Square Scrub
- Contains everything needed to replace worn isolators
- Includes a new grip face
- Includes thread lock