Searched for "47121600"
Replacement battery for QUICKBOOST Cordless Upright Vacuum SC7500A. 1 replacement battery, with a charge time of 2.5-hours. Run time is up to 47-minutes, based on hard surface testing.
- Replacement battery
- For use in quickboost cordless upright vacuum SC7500A
- Contains 1-battery
- Up to 47-minutes run time (results based on hard surface testing)
Tornado Lithium Iron Phosphate Battery Microburst Scrubber. For Use In The Tornado Ts040-W17-U Microburst Scrubber. Lithium Iron Phosphate (Lifepo4) Batteries Are Thermally Stable And Etl Listed. Provide Up To 2 Hours Of Run Time And Can Be Charged In Under 3 Hours. Higher Charging Cycle Count Over Traditional Lithium Batteries. Supports Convenience Charging With No Memory Effect. Greater Operating Temperature Range. Mfg #MB027
- For Use In The Tornado Ts040-W17-U Microburst Scrubber
- Lithium Iron Phosphate (Lifepo4) Batteries Are Thermally Stable And Etl Listed.
- Provide Up To 2 Hours Of Run Time And Can Be Charged In Under 3 Hours.
- Higher Charging Cycle Count Over Traditional Lithium Batteries.
Paper bag fits the any Sanitaire Upright Bagged Vacuum 5700 or 5800 series, including SC5713A. Incorporated allergen filtration makes sure no dust or debris escape. Dust bag is easy to change, sliding into place. Capacity is 4.5 Qt.
- Incorporated allergen filtration makes sure no dust or debris escape
- Easy-to-install design allows fast replacement for immediate use
- For use with Sanitaire upright bagged vacuum 5700
- Also works in 5800 series, including SC5713A
Namco 12 in. Heavy Duty Floor Wand for Water Extraction. Constructed from Stainless Steel to ensure no rusting. Universal compatibility with all Carpet Extractors. Up to 300 psi capability for maximum power. Adjustable handle for ultimate comfort. Easy glide on all carpet types and textures. 12 in. Wand Width.
- NAMCO 12 in. floor wand for water extraction
- Constructed from stainless steel to ensure no rusting
- Universal compatibility with all carpet extractors
- Up to 300 psi capability for maximum power
- Adjustable handle for ultimate comfort
- Easy glide on all carpet types and textures
- 12 in. wand width
Make dilution delivery with the TruFill Dispensing System easy with the TruFill hose. Simply hook-up directly to your water source and attach to the TruFill dispenser head with the quick connect adapter. Use along with the TruFill Dispensing System head and cartridges.
- 3/4 in. Dia x 6 ft.
- Delivers up to 4 GPM
- Quick connect adapter
- Hose hook up kit for TruFill dispenser
Upholstery and Stair Cleaning Tool is constructed of Stainless Steel. The perfect accessory tool to clean upholstery, stairs, and drapes. Universal compatibility with all carpet extraction and vacuum machines. 3 in. Cleaning width.
- Cleaning tool for upholstery, auto detailing, and fabric cleaning
- Universal compatibility with all carpet extraction and vacuum machines
- 3 in. cleaning width
- Attaches directly to vacuum hose and solution hose
- Stainless steel construction ensures lasting durability
Electric Bucket Heater can heat water to over 180 degree . Use to heat water for carpet cleaning and carpet dying for best cleaning results. 1200-Watt of power. Comes complete with stainless steel guard. Will not damage plastic containers. Great for use in 5 gal. to 55 gal. buckets.
- Electric bucket heater can heat water to over 180 degree
- 1200-Watt of power
- Comes complete with stainless steel guard
- Use to heat water for carpet cleaning and carpet dying for best cleaning results
- Will not damage plastic containers
- Great for use in 5 Gal. - 55 Gal. buckets
The Doodle Skate is an attachment for the Doodle Scrub. Turn the Doodle Scrub sideways to install. Scrub baseboards, tile and grout and more.
- Installs on Doodle Scrub
- Cleans baseboards, tile and grout and more
- Scrubs vertical surfaces
- Strong and heavy-duty
Keep your removable weights anchored with this stainless steel knob. Easy on the hands, this durable knob will fit any Square Scrub machine with removable weights. Works with the 4 in. and 5 in. threaded rods.
- Keeps removable weights anchored
- Made of stainless steel
- Fit any Square Scrub machine with removable weights
- Works with the 4 in. and 5 in. threaded rods
EBG-20/C Welded Weight Stack Left for Sq Scrub Pivot. Weighs 21 lbs. Compatible with Machine Serial Numbers Beginning with 20P.
- Welded weight stack makes it easier to remove the machine weights for transportation
- For left side of the EBG-20/C
- Weighs 27 lbs. each
- Only compatible with machine serial numbers beginning with 20P
Fits the Doodle Scrub by Square Scrub. The heavy-duty Velcro grip face is a vital part of your Square Scrub machine. Replace when the teeth on the Grip Face are worn.
- Fits the Doodle Scrub by Square Scrub
- Heavy-duty Velcro
- Holds pad in place
- Replace when the teeth are worn
Replacement aluminum driver plate for the Doodle Scrub EBG-9. Made of thick aluminum. Used for attaching the grip face.
- Replacement aluminum driver plate
- Fits Doodle Scrub EBG-9
- Made of aluminum
- Used for attaching the grip face
This kit contains everything needed to replace the eccentric assembly for the EBG-28 Pivot. When replacing, Square Scrub recommends installing new isolators as well. Included are: 8 isolators, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key, grip face, anti-seize and 100% silicone.
- Fits EBG-28 pivot by Square Scrub
- Everything needed to replace the eccentric assembly
- Included are: 8 isolators, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key and the grip face
- Also includes anti-seize and 100% silicone
Fits the EBG-20/C by Square Scrub. The Weight Bolt Kit has everything needed to repair the weight Bolt system. Items include: grip face, 2 weight bolts, 4 isolators, required hardware needed for repair and Loctite.
- Fits the EBG-20/C by Square Scrub
- Used to repair the weight bolt system
- Include: grip face, 2 weight bolts, 4 isolators and required hardware needed for repair
- Also includes Loctite
The right welded weight stack makes it easier to remove the machine weights for transportation or lighter duty jobs. Weight stacks weigh 21 lbs. each. Only compatible with machine serial numbers beginning with 20P.
- Welded weight stack makes it easier to remove the machine weights for transportation
- For right side of the EBG-20/C
- Weighs 27 lbs. each
- Only compatible with machine serial numbers beginning with 20P
Replacement rubber end caps for Square Scrub machine triggers. Compatible with EBG 18, 20 and 28 machines. Easy to install.
- Replacement rubber end caps
- Fits Square Scrub machines
- Easy to install
- Compatible with EBG 18, 20 and 28 machines
The heavy-duty Velcro grip face is a vital part of your Square Scrub machine. Fits the EBG-20/C. Replace when the teeth on the Grip Face are worn.
- Fits EBG-20/C
- Heavy-duty Velcro
- Holds pad in place
- Replace when the teeth are worn
Replacement foam hand grips for Square Scrub Machines. Compatible with EBG 18, 20 and 28 machines. Replaces foam on machine handles.
- Replacement foam handles
- Fits Square Scrub machines
- Easy to install
- Compatible with EBG 18, 20 and 28 machines
The axle collar replacement for Square Scrub machines. Compatible with 18 in., 20 in. and 28 in. Square Scrub machines. Contains 1 axle collar.
- Axle collar replacement for Square Scrub machines
- Holds wheel in place
- Box contains 1 axle collar
- Compatible with EBG 18 in., 20 in. and 28 in. machines
The Doodle Scrub Handle Conversion Kit relocates the wiring harness from the Doodle Scrub handle into the Doodle Scrub Base for easier maintenance. Machine serial number must be provided when ordering. This kit includes: New Doodle Scrub cover, 4 cover screws, 4 cover washers, 1 motor ground screw, 2 wire connectors, wiring harness, Doodle Scrub handle and 100% silicone.
- Kit relocates the wiring harness from the Doodle Scrub handle into the Doodle Scrub base
- Makes maintenance easier
- Machine serial number must be provided when ordering
- Kit includes: new Doodle Scrub cover, 4 cover screws, 4 cover washers, 1 motor ground screw, 2 wire connectors, wiring harness, Doodle Scrub handle and 100% silicone
Fits Square Scrub EBG-20/C. The Isolator Repair Kit has been created to make this standard maintenance process easier. Items include: grip face, 4 isolators, required hardware needed for repair and Loctite.
- Fits Square Scrub EBG-20/C
- Makes maintenance process easier
- Include: grip face, 4 isolators and required hardware needed for repair
- Also includes Loctite
The Doodle Scrub Handle Conversion Kit relocates the wiring harness from the Doodle Scrub handle into the Doodle Scrub Base for easier maintenance. Machine serial number must be provided when ordering. This kit includes: New Doodle Scrub cover, 4 cover screws, 4 cover washers, 1 motor ground screw, 2 wire connectors, wiring harness, 24 in. Doodle Scrub handle and 100% silicone.
- Kit relocates the wiring harness from the Doodle Scrub handle into the Doodle Scrub base
- Makes maintenance easier
- Converts to a 24 in. Doodle Scrub handle
- Kit includes: new Doodle Scrub cover, 4 cover screws, 4 cover washers, 1 motor ground screw, 2 wire connectors, wiring harness, Doodle Scrub handle and 100% silicone
Fits the Square Scrub EBG-20/C Pivot The Isolator Repair Kit has been created to make this standard maintenance process easier. Items include: grip face, 4 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts and motor washer. Also contains 100% silicone and Loctite.
- Fits the Square Scrub EBG-20/C pivot
- Makes maintenance process easier
- Include: grip face, 4 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts and motor washer
- Also includes 100% silicone and Loctite
An air scrubber is one of the most advanced and important tools a water damage restoration professional can have in their collection of equipment. An air scrubber requires regular maintenance to perform at its peak.The addition of the DOP filter makes the RA-650 a high efficiency three-stage air filtration unit, ready for any sensitive job requiring first-pass HEPA filtration. With the standard pre-filter, DOP Stage 2 pre-filter and the HEPA primary filter installed, the RA-650 passes laboratory DOP testing conducted per ANSI standards, achieving an efficiency rating of 99.97% against oily aerosol particles down to 0.3 microns.
- Passes laboratory DOP testing when installed as part of 3-stage filtration process
- Equips the RA-650 for a wide range of environments that require first-pass high efficiency air filtration
- Achieves an efficiency rating of 99.97% against oily aerosol particles down to 0.3 microns
- The addition of the DOP filter makes the RA-650 a high efficiency 3-stage air filtration unit, ready for any sensitive job requiring first-pass HEPA filtration
This is the Cover Replacement Kit for the Doodle Mop. The Cover Replacement Kit includes: cover, motor ground screw, 2 wire connectors, 4 cover screws and 4 cover washers. This kit contains everything you need to replace the cover.
- Cover replacement kit for the doodle mop
- Kit includes: cover, motor ground screw, 2 wire connectors, 4 cover screws and 4 cover washers
- Kit contains everything you need to replace the cover
- Replacement parts from Square Scrub
Fits the Doodle Scrub by Square Scrub. The handle Trigger makes it easier than ever to operate the Doodle Scrub. It can also help to reduce user fatigue.
- Fits the Doodle Scrub by Square Scrub
- Makes the doodle scrub easier to operate
- Reduces user fatigue
- Easy installation
The Isolator Replacement Kit fits the Doodle Mop. The Isolator Replacement Kit includes: 4 isolators, 4 washers, 4 isolator top screws, 4 isolator bottom screws, 4 cover screws, 4 cover washers. Also includes a new grip face and thread lock.
- Fits the doodle mop
- Includes: 4 isolators, 4 washers, 4 isolator top screws, 4 isolator bottom screws, 4 cover screws, 4 cover washers, also includes a new grip face and thread lock
- Also includes a new grip face and thread lock
- Provided by Square Scrub
Fits the Square Scrub EBG-20/C Pivot. The Weight Bolt Kit has everything needed to repair the weight Bolt system. Items include: grip face, 4 weight bolts, 4 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts, motor washer, 100% silicone and Loctite.
- Fits the Square Scrub EBG-20/C pivot
- Has everything needed to repair the weight bolt system
- Include: grip face, 4 weight bolts, 4 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts and motor washer
- Also includes 100% silicone and Loctite
This kit contains everything needed to replace the eccentric assembly for the EBG-28. When replacing, Square Scrub recommends installing new isolators as well. Included are: aluminum driver plate, 8 isolators, isolator bolts, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key, grip face, anti-seize and 100% silicone.
- Fits Square Scrub EBG-28
- Kit contains everything needed to replace the eccentric assembly
- Included are: aluminum driver plate, 8 isolators, isolator bolts, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key, grip face
- Also included are anti-size and 100% silicone
The 1/2 isolators connect the machine handle to the base and help to reduce nearly all felt vibration. The 1/2 Isolator Kit includes: 10 1/2 handle Isolators and 10 isolator nuts. Compatible with machine serial numbers beginning with 18P, 20P or 28P.
- Helps to reduce nearly all felt vibration
- Includes: 10-1/2 in. handle isolators and 10 isolator nuts
- 1/2 isolators connect the machine handle to the base
- Compatible with machine serial numbers beginning with 18P, 20P or 28P
This kit contains everything needed to replace the eccentric assembly for the EBG-20/C PIVOT. When replacing, Square Scrub recommends installing new isolators as well. Included are: aluminum driver plate, 4 isolators, isolator bolts, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key, grip face, anti-seize and 100% silicone.
- Fits EBG-20/C pivot
- Everything needed to replace the eccentric assembly
- Included are: aluminum driver plate, 4 isolators, isolator bolts, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key and a grip face
- Also included are anti-seize and 100% silicone
The 3450 RPM motor for Square Scrub machines is a very quiet 73DB and extremely powerful and smooth. This motor comes standard on all Square Scrub machines. Comes with a 2-year manufacturer's warranty.
- 3450 RPM motor
- Very quiet 73dB
- Standard on all Square Scrub machines
- Fits EBG-20/C and EBG-28 machines
The heavy-duty Velcro grip face is a vital part of your Square Scrub machine. The grip face is used to securely hold the pad in place. Replace when the teeth on the Grip Face are worn.
- Holds pad in place during use
- Replaces grip face on the doodle mop
- Heavy-duty grip
- Long life
The HEPA Dry Vac Kit is the answer to your airborne particle problems. It has a 6 qt. capacity and pulls under 4.5 Amp. This allows the user to tap into the power source at the Square Scrub motor, eliminating the need for extension cords. The HEPA Dry Vac Kit mounts directly to the machine with a universal mounting bracket. In conjunction with the Dust Containment Kit, the Dry Vac Kit significantly reduces airborne particles. This is NOT designed to remove the debris from the floor.
- 6 qt. capacity and pulls under 4.5 Amp
- Attaches to Square Scrub EBG-20/C pivot and EBG-28 pivot
- Significantly reduces airborne particles
- Attaches with a universal mounting bracket
The Weight Bolt Kit has been created to make this standard maintenance process easier. This kit fits the EBG-28 Pivot. Items include: grip face, 4 weight bolts, 8 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts, 100% silicone and Loctite.
- For Square Scrub EBG-28 pivot
- Makes maintenance process easier
- Contains grip face, 4 weight bolts, 8 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts
- 100% silicon and Loctite are included
Stone care and other situations where water is needed just became easier with the Square Scrub Solution Tank. Easy to install, the Solution system fits over the removable weight threaded rods for a secure fit. The tank is the same found on our popular Bucket on a Stick. At 1.25 Gal. there is enough water to help with any surface needs and the tapered bottom makes certain you can easily drain the tank. Set-up is constructed of 7-Gauge powder coated steel.
- Dispenses water when needed
- Compatible with Square Scrub EBG 20/C pivot
- 1.25 Gal. tank
- Easy to install
The handle cover screws are compatible with all 18, 20 and 28 Square Scrub machines. Attaches cover to handle. There are 4 screws total.
- Handle cover screws for Square Scrub machines
- Attaches cover to handle
- 4 screws total
- Compatible with EBG 18, 20 and 28 machines
This is the Base Plate Assembly Kit for the Doodle Scrub. The Base Plate Assembly Kit includes: 4 isolators, 4 washers, 4 isolator top screws, 4 isolator bottom screws, 4 motor bolts, 4 cover screws, 4 cover washers, aluminum driver plate, eccentric assembly, motor shaft bolt, eccentric assembly key and a crush washer. Also a grip face, thread lock, anti-seize and 100% silicone are provided.
- Base plate assembly kit for the Doodle Scrub
- Kit includes: 4 isolators, 4 washers, 4 isolator top screws, 4 isolator bottom screws, 4 motor bolts, 4 cover screws, 4 cover washers, aluminum driver plate, eccentric assembly, motor shaft bolt, eccentric assembly key and a crush washer
- Also a grip face, thread lock, anti-seize and 100% silicone are provided
- Parts provided by Square Scrub
Replacement wheel for all 20 in. and 28 in. EBG-Series machines. 6 in. Dia non marking.
- Compatible with Square Scrub machines
- Replaces wheel for all 20 in. and 28 in. EBG-series machines
- 6 in. Dia
- Non-marking
First Stage Pre-Filter Restore your RA-650 to maximum capacity High quality filter restores the RA-650 Air Scrubber to full efficiency. Replace regularly to ensure maximum performance. Synthetic fiber filter media rated at 10% efficiency. Captures the largest particles to help extend the life of the higher efficiency filters inside.
- Low-pressure drop and superior efficiency
- High dust-holding capacity
- High quality filter restores the RA-650 air scrubber to full efficiency
- Replace regularly to ensure maximum performance
- Synthetic fiber filter media rated at 10% efficiency
- Captures the largest particles to help extend the life of the higher efficiency filters inside
Activated Carbon Filter upgrade boosts RA-650 functionality HEPA filtration is increasingly seen as the single most important safety device available for creating a safe environment for jobsite workers. Now, with the Activated Carbon Filter, the RA-650 can play an even more important role in keeping an enclosed environment clean and safe - both for workers and for occupants. The activated carbon filter now equips the RA-650 to capture a wide variety of volatile organic compounds (VOCs), including soot and smoke, food odors, fumes from paint and paint thinners, sewer odors and many other compounds. No modification of the RA-650 is required - users simply place the new carbon filter inside the cabinet in front of HEPA filter and then re-secure the cover. Capacity of the carbon filter will vary widely depending on conditions, but it should be replaced when a decline of effectiveness is noted.
- Captures a wide variety of volatile organic compounds (VOCs)
- Utilizes extruded activated carbon - carbon pellets manufactured to uniform size helps to ensure maximum airflow and maximum contact
- Works by adsorption, carbon filtrations natural ability to attract and hold gas and liquid molecules on its surface
- 1 lb. of carbon has 534,438 sq. yds. of available surface - equivalent to the area covered by more than 100 football fields
This kit is for the Doodle Scrub by Square Scrub. The Isolator Replacement Kit includes: 4 isolators, 4 washers, 4 isolator top screws, 4 isolator bottom screws, 4 cover screws, 4 cover washers. Also, a new grip face and thread lock.
- Compatible with the doodle scrub by Square Scrub
- Contains everything needed to replace worn isolators
- Includes a new grip face
- Includes thread lock
This is the Base Plate Assembly Kit for the Doodle Mop. The Base Plate Assembly Kit includes: 4 isolators, 4 washers, 4 isolator top screws, 4 isolator bottom screws, 4 motor bolts, 4 cover screws, 4 cover washers, aluminum driver plate, eccentric assembly, motor shaft bolt, eccentric assembly key and a crush washer. Also a grip face, thread lock, anti-seize and 100% silicone are provided.
- Base plate assembly kit for the doodle mop
- Kit includes: 4 isolators, 4 washers, 4 isolator top screws, 4 isolator bottom screws, 4 motor bolts, 4 cover screws, 4 cover washers, aluminum driver plate, eccentric assembly, motor shaft bolt, eccentric assembly key and a crush washer
- Also a grip face, thread lock, anti-seize and 100% silicone are provided
- Parts provided by Square Scrub
The 50 ft. replacement power cable fpr Square Scrub machines. Cable is compatible with the EBG-18, EBG-20, and the EBG-28 Square Scrub machines. Product is a heavy-duty 14-Gauge power cord.
- 50 ft. replacement power cable
- Fits Square Scrub machines
- Heavy-duty 14-Gauge power cord
- Compatible with EBG 18 in., 20 in. and 28 in. machines
This is the Cover Replacement Kit for the Doodle Scrub. The Cover Replacement Kit includes: cover, motor ground screw, 2 wire connectors, 4 cover screws and 4 cover washers. This kit contains everything you need to replace the cover.
- Cover replacement kit for the Doodle Scrub
- Kit includes: cover, motor ground screw, 2 wire connectors, 4 cover screws and 4 cover washers
- Kit contains everything you need to replace the cover
- Replacement parts from Square Scrub
This kit contains everything needed to replace the eccentric assembly for the EBG-20/C Pivot. When replacing, Square Scrub recommends installing new isolators as well. Included are: 4 isolators, isolator bolts, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key, grip face, anti-seize and 100% silicone.
- Fits EBG-20/C pivot
- Contains everything needed to replace the eccentric assembly
- Included are: 4 isolators, isolator bolts, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key and grip face
- Also includes anti-seize and 100% silicone
Stone care and other situations where water is needed just became easier with the Square Scrub Solution Tank. Easy to install, the Solution system fits over the removable weight threaded rods for a secure fit. The tank is the same found on our popular Bucket on a Stick. At 1.25 Gal. there is enough water to help with any surface needs and the tapered bottom makes certain you can easily drain the tank. Set-up is constructed of 7-Gauge powder coated steel.
- Dispenses water when needed
- Compatible with Square Scrub EBG 28 pivot
- 1.25 Gal. tank
- Easy to install
This kit contains everything needed to replace the eccentric assembly for the EBG-28 Pivot. When replacing, Square Scrub recommends installing new isolators as well. Included are: aluminum driver plate, 8 isolators, isolator bolts, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key, grip face, anti-seize and 100% silicone.
- Fits EBG-28 pivot by Square Scrub
- Contains everything needed to replace the eccentric assembly for the EBG-28 pivot
- Includes: aluminum driver plate, 8 isolators, isolator bolts, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key, grip face
- Also includes anti-size and 100% silicone