Searched for "47121600"
Make dilution delivery with the TruFill Dispensing System easy with the TruFill hose. Simply hook-up directly to your water source and attach to the TruFill dispenser head with the quick connect adapter. Use along with the TruFill Dispensing System head and cartridges.
- 3/4 in. Dia x 6 ft.
- Delivers up to 4 GPM
- Quick connect adapter
- Hose hook up kit for TruFill dispenser
Electric Bucket Heater can heat water to over 180 degree . Use to heat water for carpet cleaning and carpet dying for best cleaning results. 1200-Watt of power. Comes complete with stainless steel guard. Will not damage plastic containers. Great for use in 5 gal. to 55 gal. buckets.
- Electric bucket heater can heat water to over 180 degree
- 1200-Watt of power
- Comes complete with stainless steel guard
- Use to heat water for carpet cleaning and carpet dying for best cleaning results
- Will not damage plastic containers
- Great for use in 5 Gal. - 55 Gal. buckets
Tornado Lithium Iron Phosphate Battery Microburst Scrubber. For Use In The Tornado Ts040-W17-U Microburst Scrubber. Lithium Iron Phosphate (Lifepo4) Batteries Are Thermally Stable And Etl Listed. Provide Up To 2 Hours Of Run Time And Can Be Charged In Under 3 Hours. Higher Charging Cycle Count Over Traditional Lithium Batteries. Supports Convenience Charging With No Memory Effect. Greater Operating Temperature Range. Mfg #MB027
- For Use In The Tornado Ts040-W17-U Microburst Scrubber
- Lithium Iron Phosphate (Lifepo4) Batteries Are Thermally Stable And Etl Listed.
- Provide Up To 2 Hours Of Run Time And Can Be Charged In Under 3 Hours.
- Higher Charging Cycle Count Over Traditional Lithium Batteries.
Namco 12 in. Heavy Duty Floor Wand for Water Extraction. Constructed from Stainless Steel to ensure no rusting. Universal compatibility with all Carpet Extractors. Up to 300 psi capability for maximum power. Adjustable handle for ultimate comfort. Easy glide on all carpet types and textures. 12 in. Wand Width.
- NAMCO 12 in. floor wand for water extraction
- Constructed from stainless steel to ensure no rusting
- Universal compatibility with all carpet extractors
- Up to 300 psi capability for maximum power
- Adjustable handle for ultimate comfort
- Easy glide on all carpet types and textures
- 12 in. wand width
Replacement battery for QUICKBOOST Cordless Upright Vacuum SC7500A. 1 replacement battery, with a charge time of 2.5-hours. Run time is up to 47-minutes, based on hard surface testing.
- Replacement battery
- For use in quickboost cordless upright vacuum SC7500A
- Contains 1-battery
- Up to 47-minutes run time (results based on hard surface testing)
Upholstery and Stair Cleaning Tool is constructed of Stainless Steel. The perfect accessory tool to clean upholstery, stairs, and drapes. Universal compatibility with all carpet extraction and vacuum machines. 3 in. Cleaning width.
- Cleaning tool for upholstery, auto detailing, and fabric cleaning
- Universal compatibility with all carpet extraction and vacuum machines
- 3 in. cleaning width
- Attaches directly to vacuum hose and solution hose
- Stainless steel construction ensures lasting durability
Paper bag fits the any Sanitaire Upright Bagged Vacuum 5700 or 5800 series, including SC5713A. Incorporated allergen filtration makes sure no dust or debris escape. Dust bag is easy to change, sliding into place. Capacity is 4.5 Qt.
- Incorporated allergen filtration makes sure no dust or debris escape
- Easy-to-install design allows fast replacement for immediate use
- For use with Sanitaire upright bagged vacuum 5700
- Also works in 5800 series, including SC5713A
The 1/2 isolators connect the machine handle to the base and help to reduce nearly all felt vibration. The 1/2 Isolator Kit includes: 10 1/2 handle Isolators and 10 isolator nuts. Compatible with machine serial numbers beginning with 18P, 20P or 28P.
- Helps to reduce nearly all felt vibration
- Includes: 10-1/2 in. handle isolators and 10 isolator nuts
- 1/2 isolators connect the machine handle to the base
- Compatible with machine serial numbers beginning with 18P, 20P or 28P
Fits the Square Scrub EBG-20/C Pivot. The Weight Bolt Kit has everything needed to repair the weight Bolt system. Items include: grip face, 4 weight bolts, 4 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts, motor washer, 100% silicone and Loctite.
- Fits the Square Scrub EBG-20/C pivot
- Has everything needed to repair the weight bolt system
- Include: grip face, 4 weight bolts, 4 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts and motor washer
- Also includes 100% silicone and Loctite
Replacement aluminum driver plate for the Doodle Mop. Made of thick aluminum. Used for attaching the grip face.
- Replacement aluminum driver plate
- Fits the doodle mop by Square Scrub
- Made of aluminum
- Used for attaching the grip face
This is the Cover Replacement Kit for the Doodle Scrub. The Cover Replacement Kit includes: cover, motor ground screw, 2 wire connectors, 4 cover screws and 4 cover washers. This kit contains everything you need to replace the cover.
- Cover replacement kit for the Doodle Scrub
- Kit includes: cover, motor ground screw, 2 wire connectors, 4 cover screws and 4 cover washers
- Kit contains everything you need to replace the cover
- Replacement parts from Square Scrub
This kit contains everything needed to replace the eccentric assembly for the EBG-28 Pivot. When replacing, Square Scrub recommends installing new isolators as well. Included are: 8 isolators, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key, grip face, anti-seize and 100% silicone.
- Fits EBG-28 pivot by Square Scrub
- Everything needed to replace the eccentric assembly
- Included are: 8 isolators, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key and the grip face
- Also includes anti-seize and 100% silicone
The heavy-duty Velcro grip face is a vital part of your Square Scrub machine. The grip face is used to securely hold the pad in place. Replace when the teeth on the Grip Face are worn.
- Holds pad in place during use
- Replaces grip face on the doodle mop
- Heavy-duty grip
- Long life
The Doodle Scrub Handle Conversion Kit relocates the wiring harness from the Doodle Scrub handle into the Doodle Scrub Base for easier maintenance. Machine serial number must be provided when ordering. This kit includes: New Doodle Scrub cover, 4 cover screws, 4 cover washers, 1 motor ground screw, 2 wire connectors, wiring harness, 24 in. Doodle Scrub handle and 100% silicone.
- Kit relocates the wiring harness from the Doodle Scrub handle into the Doodle Scrub base
- Makes maintenance easier
- Converts to a 24 in. Doodle Scrub handle
- Kit includes: new Doodle Scrub cover, 4 cover screws, 4 cover washers, 1 motor ground screw, 2 wire connectors, wiring harness, Doodle Scrub handle and 100% silicone
This is the Cover Replacement Kit for the Doodle Mop. The Cover Replacement Kit includes: cover, motor ground screw, 2 wire connectors, 4 cover screws and 4 cover washers. This kit contains everything you need to replace the cover.
- Cover replacement kit for the doodle mop
- Kit includes: cover, motor ground screw, 2 wire connectors, 4 cover screws and 4 cover washers
- Kit contains everything you need to replace the cover
- Replacement parts from Square Scrub
Tension Handle Assembly for Square Scrub machines. Compatible with all 18 in., 20 in. and 28 in. Square Scrub Pivot machines. The 3/8 in. Tension Handle Assembly is also compatible with older style Square Scrub machines with serial numbers 32U11326 or greater.
- Tension handle assembly
- Compatible with all 18 in., 20 in., and 28 in. Square Scrub pivot machines
- Compatible with older style Square Scrub machines with serial numbers 32U11326 or greater
- Locks handle into different positions
Our Dust Containment Kit adds another dimension in controlling indoor airborne particles during dry stripping. Easy to install. Fits any Square Scrub machine built.
- Controls indoor airborne particles
- Use while dry stripping or sanding
- Easy to install
- Includes: adhesive strip and VELCRO
The hour meter is a great way to track total man-hours spent using Square Scrub machines. Simple to install, the hour meter can allow for better budgeting of labor spent resurfacing floors. The hour meter works with any 20 in. or 28 in. Square Scrub machine.
- Track total man-hours spent
- Hour meter can allow for better budgeting of labor spent resurfacing floors
- Works with any 20 in. or 28 in. Square Scrub machine
- Simple to install
The 50 ft. replacement power cable fpr Square Scrub machines. Cable is compatible with the EBG-18, EBG-20, and the EBG-28 Square Scrub machines. Product is a heavy-duty 14-Gauge power cord.
- 50 ft. replacement power cable
- Fits Square Scrub machines
- Heavy-duty 14-Gauge power cord
- Compatible with EBG 18 in., 20 in. and 28 in. machines
This kit fits the EBG-28 Pivot by Square Scrub. The Isolator Repair Kit has been created to make this standard maintenance process easier. Items include: grip face, 8 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts, motor washer, 100% silicone and Loctite.
- Fits the EBG-28 pivot by Square Scrub
- Makes the maintenance process easier
- Includes grip face, 8 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts and motor washer
- Also includes 100% silicone and Loctite
The HEPA Dry Vac Kit is the answer to your airborne particle problems. It has a 6 qt. capacity and pulls under 4.5 Amp. This allows the user to tap into the power source at the Square Scrub motor, eliminating the need for extension cords. The HEPA Dry Vac Kit mounts directly to the machine with a universal mounting bracket. In conjunction with the Dust Containment Kit, the Dry Vac Kit significantly reduces airborne particles. This is NOT designed to remove the debris from the floor.
- 6 qt. capacity and pulls under 4.5 Amp
- Attaches to Square Scrub EBG-20/C pivot and EBG-28 pivot
- Significantly reduces airborne particles
- Attaches with a universal mounting bracket
The Doodle Scrub Handle Conversion Kit relocates the wiring harness from the Doodle Scrub handle into the Doodle Scrub Base for easier maintenance. Machine serial number must be provided when ordering. This kit includes: New Doodle Scrub cover, 4 cover screws, 4 cover washers, 1 motor ground screw, 2 wire connectors, wiring harness, Doodle Scrub handle and 100% silicone.
- Kit relocates the wiring harness from the Doodle Scrub handle into the Doodle Scrub base
- Makes maintenance easier
- Machine serial number must be provided when ordering
- Kit includes: new Doodle Scrub cover, 4 cover screws, 4 cover washers, 1 motor ground screw, 2 wire connectors, wiring harness, Doodle Scrub handle and 100% silicone
Stone care and other situations where water is needed just became easier with the Square Scrub Solution Tank. Easy to install, the Solution system fits over the removable weight threaded rods for a secure fit. The tank is the same found on our popular Bucket on a Stick. At 1.25 Gal. there is enough water to help with any surface needs and the tapered bottom makes certain you can easily drain the tank. Set-up is constructed of 7-Gauge powder coated steel.
- Dispenses water when needed
- Compatible with Square Scrub EBG 20/C pivot
- 1.25 Gal. tank
- Easy to install
This kit fits the Square Scrub EBG-28. The Weight Bolt Kit has been created to make this standard maintenance process easier. Items include: grip face, 2 weight bolts, 8 isolators, required hardware needed for repair and Loctite.
- Fits the Square Scrub EBG-28
- Created to make this standard maintenance process easier
- Includes: grip face, 2 weight bolts, 8 isolators, required hardware needed for repair
- Includes Loctite