Searched for "diversey cleaning & janitorial"
Tornado Lithium Iron Phosphate Battery Microburst Scrubber. For Use In The Tornado Ts040-W17-U Microburst Scrubber. Lithium Iron Phosphate (Lifepo4) Batteries Are Thermally Stable And Etl Listed. Provide Up To 2 Hours Of Run Time And Can Be Charged In Under 3 Hours. Higher Charging Cycle Count Over Traditional Lithium Batteries. Supports Convenience Charging With No Memory Effect. Greater Operating Temperature Range. Mfg #MB027
- For Use In The Tornado Ts040-W17-U Microburst Scrubber
- Lithium Iron Phosphate (Lifepo4) Batteries Are Thermally Stable And Etl Listed.
- Provide Up To 2 Hours Of Run Time And Can Be Charged In Under 3 Hours.
- Higher Charging Cycle Count Over Traditional Lithium Batteries.
Paper bag fits the any Sanitaire Upright Bagged Vacuum 5700 or 5800 series, including SC5713A. Incorporated allergen filtration makes sure no dust or debris escape. Dust bag is easy to change, sliding into place. Capacity is 4.5 Qt.
- Incorporated allergen filtration makes sure no dust or debris escape
- Easy-to-install design allows fast replacement for immediate use
- For use with Sanitaire upright bagged vacuum 5700
- Also works in 5800 series, including SC5713A
Namco 12 in. Heavy Duty Floor Wand for Water Extraction. Constructed from Stainless Steel to ensure no rusting. Universal compatibility with all Carpet Extractors. Up to 300 psi capability for maximum power. Adjustable handle for ultimate comfort. Easy glide on all carpet types and textures. 12 in. Wand Width.
- NAMCO 12 in. floor wand for water extraction
- Constructed from stainless steel to ensure no rusting
- Universal compatibility with all carpet extractors
- Up to 300 psi capability for maximum power
- Adjustable handle for ultimate comfort
- Easy glide on all carpet types and textures
- 12 in. wand width
Make dilution delivery with the TruFill Dispensing System easy with the TruFill hose. Simply hook-up directly to your water source and attach to the TruFill dispenser head with the quick connect adapter. Use along with the TruFill Dispensing System head and cartridges.
- 3/4 in. Dia x 6 ft.
- Delivers up to 4 GPM
- Quick connect adapter
- Hose hook up kit for TruFill dispenser
Replacement battery for QUICKBOOST Cordless Upright Vacuum SC7500A. 1 replacement battery, with a charge time of 2.5-hours. Run time is up to 47-minutes, based on hard surface testing.
- Replacement battery
- For use in quickboost cordless upright vacuum SC7500A
- Contains 1-battery
- Up to 47-minutes run time (results based on hard surface testing)
Electric Bucket Heater can heat water to over 180 degree . Use to heat water for carpet cleaning and carpet dying for best cleaning results. 1200-Watt of power. Comes complete with stainless steel guard. Will not damage plastic containers. Great for use in 5 gal. to 55 gal. buckets.
- Electric bucket heater can heat water to over 180 degree
- 1200-Watt of power
- Comes complete with stainless steel guard
- Use to heat water for carpet cleaning and carpet dying for best cleaning results
- Will not damage plastic containers
- Great for use in 5 Gal. - 55 Gal. buckets
Upholstery and Stair Cleaning Tool is constructed of Stainless Steel. The perfect accessory tool to clean upholstery, stairs, and drapes. Universal compatibility with all carpet extraction and vacuum machines. 3 in. Cleaning width.
- Cleaning tool for upholstery, auto detailing, and fabric cleaning
- Universal compatibility with all carpet extraction and vacuum machines
- 3 in. cleaning width
- Attaches directly to vacuum hose and solution hose
- Stainless steel construction ensures lasting durability
Replacement foam hand grips for Square Scrub Machines. Compatible with EBG 18, 20 and 28 machines. Replaces foam on machine handles.
- Replacement foam handles
- Fits Square Scrub machines
- Easy to install
- Compatible with EBG 18, 20 and 28 machines
Replacement rubber end caps for Square Scrub machine triggers. Compatible with EBG 18, 20 and 28 machines. Easy to install.
- Replacement rubber end caps
- Fits Square Scrub machines
- Easy to install
- Compatible with EBG 18, 20 and 28 machines
The heavy-duty Velcro grip face is a vital part of your Square Scrub machine. Fits the EBG-20/C. Replace when the teeth on the Grip Face are worn.
- Fits EBG-20/C
- Heavy-duty Velcro
- Holds pad in place
- Replace when the teeth are worn
The right welded weight stack makes it easier to remove the machine weights for transportation or lighter duty jobs. Weight stacks weigh 21 lbs. each. Only compatible with machine serial numbers beginning with 20P.
- Welded weight stack makes it easier to remove the machine weights for transportation
- For right side of the EBG-20/C
- Weighs 27 lbs. each
- Only compatible with machine serial numbers beginning with 20P
The 1/2 isolators connect the machine handle to the base and help to reduce nearly all felt vibration. The 1/2 Isolator Kit includes: 10 1/2 handle Isolators and 10 isolator nuts. Compatible with machine serial numbers beginning with 18P, 20P or 28P.
- Helps to reduce nearly all felt vibration
- Includes: 10-1/2 in. handle isolators and 10 isolator nuts
- 1/2 isolators connect the machine handle to the base
- Compatible with machine serial numbers beginning with 18P, 20P or 28P
This is the Cover Replacement Kit for the Doodle Mop. The Cover Replacement Kit includes: cover, motor ground screw, 2 wire connectors, 4 cover screws and 4 cover washers. This kit contains everything you need to replace the cover.
- Cover replacement kit for the doodle mop
- Kit includes: cover, motor ground screw, 2 wire connectors, 4 cover screws and 4 cover washers
- Kit contains everything you need to replace the cover
- Replacement parts from Square Scrub
Fits the Doodle Scrub by Square Scrub. The handle Trigger makes it easier than ever to operate the Doodle Scrub. It can also help to reduce user fatigue.
- Fits the Doodle Scrub by Square Scrub
- Makes the doodle scrub easier to operate
- Reduces user fatigue
- Easy installation
The Weight Bolt Kit has been created to make this standard maintenance process easier. This kit fits the EBG-28 Pivot. Items include: grip face, 4 weight bolts, 8 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts, 100% silicone and Loctite.
- For Square Scrub EBG-28 pivot
- Makes maintenance process easier
- Contains grip face, 4 weight bolts, 8 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts
- 100% silicon and Loctite are included
This kit contains everything needed to replace the eccentric assembly for the EBG-28 Pivot. When replacing, Square Scrub recommends installing new isolators as well. Included are: 8 isolators, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key, grip face, anti-seize and 100% silicone.
- Fits EBG-28 pivot by Square Scrub
- Everything needed to replace the eccentric assembly
- Included are: 8 isolators, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key and the grip face
- Also includes anti-seize and 100% silicone
This is the Cover Replacement Kit for the Doodle Scrub. The Cover Replacement Kit includes: cover, motor ground screw, 2 wire connectors, 4 cover screws and 4 cover washers. This kit contains everything you need to replace the cover.
- Cover replacement kit for the Doodle Scrub
- Kit includes: cover, motor ground screw, 2 wire connectors, 4 cover screws and 4 cover washers
- Kit contains everything you need to replace the cover
- Replacement parts from Square Scrub
This kit contains everything needed to replace the eccentric assembly for the EBG-20/C. When replacing, Square Scrub recommends installing new isolators as well. Included are: aluminum driver plate, 4 isolators, isolator bolts, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key, grip face, anti-seize and 100% silicone.
- Fits EBG-20/C by Square Scrub
- Replaces eccentric assembly
- Included are: aluminum driver plate, 4 isolators, isolator bolts, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key and grip face
- Also includes anti-seize and 100% silicone
EBG-20/C Welded Weight Stack Left for Sq Scrub Pivot. Weighs 21 lbs. Compatible with Machine Serial Numbers Beginning with 20P.
- Welded weight stack makes it easier to remove the machine weights for transportation
- For left side of the EBG-20/C
- Weighs 27 lbs. each
- Only compatible with machine serial numbers beginning with 20P
The Micro Switch is the ignition for the Square Scrub machine. This is an internal piece and is easily and quickly replaced. This switch works for all 20 in. and 28 in. machines.
- Ignition for the Square Scrub machine
- Internal piece
- Easily and quickly replaced
- Switch works for all 20 in. and 28 in. machines
This is the Base Plate Assembly Kit for the Doodle Scrub. The Base Plate Assembly Kit includes: 4 isolators, 4 washers, 4 isolator top screws, 4 isolator bottom screws, 4 motor bolts, 4 cover screws, 4 cover washers, aluminum driver plate, eccentric assembly, motor shaft bolt, eccentric assembly key and a crush washer. Also a grip face, thread lock, anti-seize and 100% silicone are provided.
- Base plate assembly kit for the Doodle Scrub
- Kit includes: 4 isolators, 4 washers, 4 isolator top screws, 4 isolator bottom screws, 4 motor bolts, 4 cover screws, 4 cover washers, aluminum driver plate, eccentric assembly, motor shaft bolt, eccentric assembly key and a crush washer
- Also a grip face, thread lock, anti-seize and 100% silicone are provided
- Parts provided by Square Scrub
This is the left handle adjustment bar for Square Scrub machines. It is compatible with all 18 in., 20 in. and 28 in. Square Scrub Pivot machines. Side bar for hardware used to adjust the handle height.
- Handle adjustment bar for Square Scrub machines
- Compatible with all 18 in., 20 in. and 28 in. Square Scrub pivot machines
- Side bar for hardware used to adjust the handle height
- For left side
Wiring Harness Replacement Kit from Square Scrub. The Wiring Harness Replacement Kit replaces the wiring harness for the Doodle Scrub and Doodle Mop. The Wiring Harness Replacement Kit includes: wiring harness, 2 wire connectors, motor ground screw and 4 cover screws.
- Harness replacement kit replaces the wiring harness for the Doodle Scrub and doodle mop
- Kit includes: wiring harness, 2 wire connectors, motor ground screw and 4 cover screws
- Kit contains everything you need to replace the wiring harness
- Replacement parts from Square Scrub
The Doodle Scrub Handle Conversion Kit relocates the wiring harness from the Doodle Scrub handle into the Doodle Scrub Base for easier maintenance. Machine serial number must be provided when ordering. This kit includes: New Doodle Scrub cover, 4 cover screws, 4 cover washers, 1 motor ground screw, 2 wire connectors, wiring harness, 24 in. Doodle Scrub handle and 100% silicone.
- Kit relocates the wiring harness from the Doodle Scrub handle into the Doodle Scrub base
- Makes maintenance easier
- Converts to a 24 in. Doodle Scrub handle
- Kit includes: new Doodle Scrub cover, 4 cover screws, 4 cover washers, 1 motor ground screw, 2 wire connectors, wiring harness, Doodle Scrub handle and 100% silicone