Searched for "diversey cleaning & janitorial"
Make dilution delivery with the TruFill Dispensing System easy with the TruFill hose. Simply hook-up directly to your water source and attach to the TruFill dispenser head with the quick connect adapter. Use along with the TruFill Dispensing System head and cartridges.
- 3/4 in. Dia x 6 ft.
- Delivers up to 4 GPM
- Quick connect adapter
- Hose hook up kit for TruFill dispenser
Replacement battery for QUICKBOOST Cordless Upright Vacuum SC7500A. 1 replacement battery, with a charge time of 2.5-hours. Run time is up to 47-minutes, based on hard surface testing.
- Replacement battery
- For use in quickboost cordless upright vacuum SC7500A
- Contains 1-battery
- Up to 47-minutes run time (results based on hard surface testing)
Paper bag fits the any Sanitaire Upright Bagged Vacuum 5700 or 5800 series, including SC5713A. Incorporated allergen filtration makes sure no dust or debris escape. Dust bag is easy to change, sliding into place. Capacity is 4.5 Qt.
- Incorporated allergen filtration makes sure no dust or debris escape
- Easy-to-install design allows fast replacement for immediate use
- For use with Sanitaire upright bagged vacuum 5700
- Also works in 5800 series, including SC5713A
Upholstery and Stair Cleaning Tool is constructed of Stainless Steel. The perfect accessory tool to clean upholstery, stairs, and drapes. Universal compatibility with all carpet extraction and vacuum machines. 3 in. Cleaning width.
- Cleaning tool for upholstery, auto detailing, and fabric cleaning
- Universal compatibility with all carpet extraction and vacuum machines
- 3 in. cleaning width
- Attaches directly to vacuum hose and solution hose
- Stainless steel construction ensures lasting durability
Electric Bucket Heater can heat water to over 180 degree . Use to heat water for carpet cleaning and carpet dying for best cleaning results. 1200-Watt of power. Comes complete with stainless steel guard. Will not damage plastic containers. Great for use in 5 gal. to 55 gal. buckets.
- Electric bucket heater can heat water to over 180 degree
- 1200-Watt of power
- Comes complete with stainless steel guard
- Use to heat water for carpet cleaning and carpet dying for best cleaning results
- Will not damage plastic containers
- Great for use in 5 Gal. - 55 Gal. buckets
Tornado Lithium Iron Phosphate Battery Microburst Scrubber. For Use In The Tornado Ts040-W17-U Microburst Scrubber. Lithium Iron Phosphate (Lifepo4) Batteries Are Thermally Stable And Etl Listed. Provide Up To 2 Hours Of Run Time And Can Be Charged In Under 3 Hours. Higher Charging Cycle Count Over Traditional Lithium Batteries. Supports Convenience Charging With No Memory Effect. Greater Operating Temperature Range. Mfg #MB027
- For Use In The Tornado Ts040-W17-U Microburst Scrubber
- Lithium Iron Phosphate (Lifepo4) Batteries Are Thermally Stable And Etl Listed.
- Provide Up To 2 Hours Of Run Time And Can Be Charged In Under 3 Hours.
- Higher Charging Cycle Count Over Traditional Lithium Batteries.
Namco 12 in. Heavy Duty Floor Wand for Water Extraction. Constructed from Stainless Steel to ensure no rusting. Universal compatibility with all Carpet Extractors. Up to 300 psi capability for maximum power. Adjustable handle for ultimate comfort. Easy glide on all carpet types and textures. 12 in. Wand Width.
- NAMCO 12 in. floor wand for water extraction
- Constructed from stainless steel to ensure no rusting
- Universal compatibility with all carpet extractors
- Up to 300 psi capability for maximum power
- Adjustable handle for ultimate comfort
- Easy glide on all carpet types and textures
- 12 in. wand width
The HEPA Dry Vac Kit is the answer to your airborne particle problems. It has a 6 qt. capacity and pulls under 4.5 Amp. This allows the user to tap into the power source at the Square Scrub motor, eliminating the need for extension cords. The HEPA Dry Vac Kit mounts directly to the machine with a universal mounting bracket. In conjunction with the Dust Containment Kit, the Dry Vac Kit significantly reduces airborne particles. This is NOT designed to remove the debris from the floor.
- 6 qt. capacity and pulls under 4.5 Amp
- Attaches to Square Scrub EBG-20/C pivot and EBG-28 pivot
- Significantly reduces airborne particles
- Attaches with a universal mounting bracket
This kit fits the Square Scrub EBG-28. The Weight Bolt Kit has been created to make this standard maintenance process easier. Items include: grip face, 2 weight bolts, 8 isolators, required hardware needed for repair and Loctite.
- Fits the Square Scrub EBG-28
- Created to make this standard maintenance process easier
- Includes: grip face, 2 weight bolts, 8 isolators, required hardware needed for repair
- Includes Loctite
Fits the Square Scrub EBG-20/C Pivot The Isolator Repair Kit has been created to make this standard maintenance process easier. Items include: grip face, 4 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts and motor washer. Also contains 100% silicone and Loctite.
- Fits the Square Scrub EBG-20/C pivot
- Makes maintenance process easier
- Include: grip face, 4 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts and motor washer
- Also includes 100% silicone and Loctite
The heavy-duty Velcro grip face is a vital part of your Square Scrub machine. Replace when the teeth on the Grip Face are worn. Fits 28 in. Square Scrub machines.
- 28 in. W
- Heavy-duty
- Replacement for worn grip faces
- Fits Square Scrub EBG-28
Increasing weight helps the machine penetrate thick finishes. This 6 lbs. plate is a great way to effectively and safely add additional weight to your machine. This weight should only be used at the bottom of the weight stack on EBG-20/C Pivot Machines. Do not use with any 28 in. machines.
- 6 lbs. plate
- Effectively and safely add additional weight to your machine
- Should only be used at the bottom of the weight stack on EBG-20/C pivot
- Do not use with any 28 in. machines
Replacement foam hand grips for Square Scrub Machines. Compatible with EBG 18, 20 and 28 machines. Replaces foam on machine handles.
- Replacement foam handles
- Fits Square Scrub machines
- Easy to install
- Compatible with EBG 18, 20 and 28 machines
This kit contains everything needed to replace the eccentric assembly for the EBG-20/C. When replacing, Square Scrub recommends installing new isolators as well. Included are: aluminum driver plate, 4 isolators, isolator bolts, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key, grip face, anti-seize and 100% silicone.
- Fits EBG-20/C by Square Scrub
- Replaces eccentric assembly
- Included are: aluminum driver plate, 4 isolators, isolator bolts, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key and grip face
- Also includes anti-seize and 100% silicone
The Isolator Replacement Kit fits the Doodle Mop. The Isolator Replacement Kit includes: 4 isolators, 4 washers, 4 isolator top screws, 4 isolator bottom screws, 4 cover screws, 4 cover washers. Also includes a new grip face and thread lock.
- Fits the doodle mop
- Includes: 4 isolators, 4 washers, 4 isolator top screws, 4 isolator bottom screws, 4 cover screws, 4 cover washers, also includes a new grip face and thread lock
- Also includes a new grip face and thread lock
- Provided by Square Scrub
Fits the Doodle Scrub by Square Scrub. The switch is the ignition for the Doodle Scrub. Located in the handle, this internal piece is easily and quickly replaced.
- Serves as the ignition for the Doodle Scrub
- Located in the handle
- Internal piece
- Can be easily and quickly replaced
This is the Cover Replacement Kit for the Doodle Mop. The Cover Replacement Kit includes: cover, motor ground screw, 2 wire connectors, 4 cover screws and 4 cover washers. This kit contains everything you need to replace the cover.
- Cover replacement kit for the doodle mop
- Kit includes: cover, motor ground screw, 2 wire connectors, 4 cover screws and 4 cover washers
- Kit contains everything you need to replace the cover
- Replacement parts from Square Scrub
The 1/2 isolators connect the machine handle to the base and help to reduce nearly all felt vibration. The 1/2 Isolator Kit includes: 10 1/2 handle Isolators and 10 isolator nuts. Compatible with machine serial numbers beginning with 18P, 20P or 28P.
- Helps to reduce nearly all felt vibration
- Includes: 10-1/2 in. handle isolators and 10 isolator nuts
- 1/2 isolators connect the machine handle to the base
- Compatible with machine serial numbers beginning with 18P, 20P or 28P
Doodle Scrub battery charger is used to charge the battery line of machines by Square Scrub. Compatible with the battery powered Doodle Scrub and the battery powered Doodle Mop. Charges battery handle.
- Charges the battery line of machines by Square Scrub
- Compatible with the battery powered doodle scrub
- Also compatible with the battery powered doodle mop
- Charges battery handle
Our Dust Containment Kit adds another dimension in controlling indoor airborne particles during dry stripping. Easy to install. Fits any Square Scrub machine built.
- Controls indoor airborne particles
- Use while dry stripping or sanding
- Easy to install
- Includes: adhesive strip and VELCRO
Fits the Square Scrub EBG-20/C Pivot. The Weight Bolt Kit has everything needed to repair the weight Bolt system. Items include: grip face, 4 weight bolts, 4 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts, motor washer, 100% silicone and Loctite.
- Fits the Square Scrub EBG-20/C pivot
- Has everything needed to repair the weight bolt system
- Include: grip face, 4 weight bolts, 4 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts and motor washer
- Also includes 100% silicone and Loctite
This kit is for the Doodle Scrub by Square Scrub. The Isolator Replacement Kit includes: 4 isolators, 4 washers, 4 isolator top screws, 4 isolator bottom screws, 4 cover screws, 4 cover washers. Also, a new grip face and thread lock.
- Compatible with the doodle scrub by Square Scrub
- Contains everything needed to replace worn isolators
- Includes a new grip face
- Includes thread lock
This kit contains everything needed to replace the eccentric assembly for the EBG-28. When replacing, Square Scrub recommends installing new isolators as well. Included are: aluminum driver plate, 8 isolators, isolator bolts, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key, grip face, anti-seize and 100% silicone.
- Fits Square Scrub EBG-28
- Kit contains everything needed to replace the eccentric assembly
- Included are: aluminum driver plate, 8 isolators, isolator bolts, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key, grip face
- Also included are anti-size and 100% silicone
This is the Base Plate Assembly Kit for the Doodle Scrub. The Base Plate Assembly Kit includes: 4 isolators, 4 washers, 4 isolator top screws, 4 isolator bottom screws, 4 motor bolts, 4 cover screws, 4 cover washers, aluminum driver plate, eccentric assembly, motor shaft bolt, eccentric assembly key and a crush washer. Also a grip face, thread lock, anti-seize and 100% silicone are provided.
- Base plate assembly kit for the Doodle Scrub
- Kit includes: 4 isolators, 4 washers, 4 isolator top screws, 4 isolator bottom screws, 4 motor bolts, 4 cover screws, 4 cover washers, aluminum driver plate, eccentric assembly, motor shaft bolt, eccentric assembly key and a crush washer
- Also a grip face, thread lock, anti-seize and 100% silicone are provided
- Parts provided by Square Scrub