Other Equipment Accessories & Parts
Replacement foam hand grips for Square Scrub Machines. Compatible with EBG 18, 20 and 28 machines. Replaces foam on machine handles.
- Replacement foam handles
- Fits Square Scrub machines
- Easy to install
- Compatible with EBG 18, 20 and 28 machines
The 1/2 isolators connect the machine handle to the base and help to reduce nearly all felt vibration. The 1/2 Isolator Kit includes: 10 1/2 handle Isolators and 10 isolator nuts. Compatible with machine serial numbers beginning with 18P, 20P or 28P.
- Helps to reduce nearly all felt vibration
- Includes: 10-1/2 in. handle isolators and 10 isolator nuts
- 1/2 isolators connect the machine handle to the base
- Compatible with machine serial numbers beginning with 18P, 20P or 28P
Fits the Doodle Scrub by Square Scrub. The handle Trigger makes it easier than ever to operate the Doodle Scrub. It can also help to reduce user fatigue.
- Fits the Doodle Scrub by Square Scrub
- Makes the doodle scrub easier to operate
- Reduces user fatigue
- Easy installation
Stone care and other situations where water is needed just became easier with the Square Scrub Solution Tank. Easy to install, the Solution system fits over the removable weight threaded rods for a secure fit. The tank is the same found on our popular Bucket on a Stick. At 1.25 Gal. there is enough water to help with any surface needs and the tapered bottom makes certain you can easily drain the tank. Set-up is constructed of 7-Gauge powder coated steel.
- Dispenses water when needed
- Compatible with Square Scrub EBG 28 pivot
- 1.25 Gal. tank
- Easy to install
This is the Cover Replacement Kit for the Doodle Scrub. The Cover Replacement Kit includes: cover, motor ground screw, 2 wire connectors, 4 cover screws and 4 cover washers. This kit contains everything you need to replace the cover.
- Cover replacement kit for the Doodle Scrub
- Kit includes: cover, motor ground screw, 2 wire connectors, 4 cover screws and 4 cover washers
- Kit contains everything you need to replace the cover
- Replacement parts from Square Scrub
This kit contains everything needed to replace the eccentric assembly for the EBG-28. When replacing, Square Scrub recommends installing new isolators as well. Included are: aluminum driver plate, 8 isolators, isolator bolts, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key, grip face, anti-seize and 100% silicone.
- Fits Square Scrub EBG-28
- Kit contains everything needed to replace the eccentric assembly
- Included are: aluminum driver plate, 8 isolators, isolator bolts, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key, grip face
- Also included are anti-size and 100% silicone
This is the Base Plate Assembly Kit for the Doodle Scrub. The Base Plate Assembly Kit includes: 4 isolators, 4 washers, 4 isolator top screws, 4 isolator bottom screws, 4 motor bolts, 4 cover screws, 4 cover washers, aluminum driver plate, eccentric assembly, motor shaft bolt, eccentric assembly key and a crush washer. Also a grip face, thread lock, anti-seize and 100% silicone are provided.
- Base plate assembly kit for the Doodle Scrub
- Kit includes: 4 isolators, 4 washers, 4 isolator top screws, 4 isolator bottom screws, 4 motor bolts, 4 cover screws, 4 cover washers, aluminum driver plate, eccentric assembly, motor shaft bolt, eccentric assembly key and a crush washer
- Also a grip face, thread lock, anti-seize and 100% silicone are provided
- Parts provided by Square Scrub
Tension Handle Assembly for Square Scrub machines. Compatible with all 18 in., 20 in. and 28 in. Square Scrub Pivot machines. The 3/8 in. Tension Handle Assembly is also compatible with older style Square Scrub machines with serial numbers 32U11326 or greater.
- Tension handle assembly
- Compatible with all 18 in., 20 in., and 28 in. Square Scrub pivot machines
- Compatible with older style Square Scrub machines with serial numbers 32U11326 or greater
- Locks handle into different positions
The Doodle Scrub Handle Conversion Kit relocates the wiring harness from the Doodle Scrub handle into the Doodle Scrub Base for easier maintenance. Machine serial number must be provided when ordering. This kit includes: New Doodle Scrub cover, 4 cover screws, 4 cover washers, 1 motor ground screw, 2 wire connectors, wiring harness, 24 in. Doodle Scrub handle and 100% silicone.
- Kit relocates the wiring harness from the Doodle Scrub handle into the Doodle Scrub base
- Makes maintenance easier
- Converts to a 24 in. Doodle Scrub handle
- Kit includes: new Doodle Scrub cover, 4 cover screws, 4 cover washers, 1 motor ground screw, 2 wire connectors, wiring harness, Doodle Scrub handle and 100% silicone
Our Dust Containment Kit adds another dimension in controlling indoor airborne particles during dry stripping. Easy to install. Fits any Square Scrub machine built.
- Controls indoor airborne particles
- Use while dry stripping or sanding
- Easy to install
- Includes: adhesive strip and VELCRO
This kit contains everything needed to replace the eccentric assembly for the EBG-20/C Pivot. When replacing, Square Scrub recommends installing new isolators as well. Included are: 4 isolators, isolator bolts, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key, grip face, anti-seize and 100% silicone.
- Fits EBG-20/C pivot
- Contains everything needed to replace the eccentric assembly
- Included are: 4 isolators, isolator bolts, motor shaft spacer, motor shaft cap bolt, bearing bolts, eccentric assembly, crush washer, eccentric assembly key and grip face
- Also includes anti-seize and 100% silicone
The 50 ft. replacement power cable fpr Square Scrub machines. Cable is compatible with the EBG-18, EBG-20, and the EBG-28 Square Scrub machines. Product is a heavy-duty 14-Gauge power cord.
- 50 ft. replacement power cable
- Fits Square Scrub machines
- Heavy-duty 14-Gauge power cord
- Compatible with EBG 18 in., 20 in. and 28 in. machines
Fits the Doodle Scrub by Square Scrub. The heavy-duty Velcro grip face is a vital part of your Square Scrub machine. Replace when the teeth on the Grip Face are worn.
- Fits the Doodle Scrub by Square Scrub
- Heavy-duty Velcro
- Holds pad in place
- Replace when the teeth are worn
This kit fits the EBG-28 Pivot by Square Scrub. The Isolator Repair Kit has been created to make this standard maintenance process easier. Items include: grip face, 8 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts, motor washer, 100% silicone and Loctite.
- Fits the EBG-28 pivot by Square Scrub
- Makes the maintenance process easier
- Includes grip face, 8 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts and motor washer
- Also includes 100% silicone and Loctite
Fits the EBG-20/C by Square Scrub. The Weight Bolt Kit has everything needed to repair the weight Bolt system. Items include: grip face, 2 weight bolts, 4 isolators, required hardware needed for repair and Loctite.
- Fits the EBG-20/C by Square Scrub
- Used to repair the weight bolt system
- Include: grip face, 2 weight bolts, 4 isolators and required hardware needed for repair
- Also includes Loctite
Fits the Square Scrub EBG-20/C Pivot. The Weight Bolt Kit has everything needed to repair the weight Bolt system. Items include: grip face, 4 weight bolts, 4 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts, motor washer, 100% silicone and Loctite.
- Fits the Square Scrub EBG-20/C pivot
- Has everything needed to repair the weight bolt system
- Include: grip face, 4 weight bolts, 4 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts and motor washer
- Also includes 100% silicone and Loctite
Keep your removable weights anchored with this stainless steel knob. Easy on the hands, this durable knob will fit any Square Scrub machine with removable weights. Works with the 4 in. and 5 in. threaded rods.
- Keeps removable weights anchored
- Made of stainless steel
- Fit any Square Scrub machine with removable weights
- Works with the 4 in. and 5 in. threaded rods
Fits the Square Scrub EBG-20/C Pivot The Isolator Repair Kit has been created to make this standard maintenance process easier. Items include: grip face, 4 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts and motor washer. Also contains 100% silicone and Loctite.
- Fits the Square Scrub EBG-20/C pivot
- Makes maintenance process easier
- Include: grip face, 4 isolators, isolator nuts and bolts, motor shaft spacer, motor bolt, bearing bolts and motor washer
- Also includes 100% silicone and Loctite
EBG-20/C Welded Weight Stack Left for Sq Scrub Pivot. Weighs 21 lbs. Compatible with Machine Serial Numbers Beginning with 20P.
- Welded weight stack makes it easier to remove the machine weights for transportation
- For left side of the EBG-20/C
- Weighs 27 lbs. each
- Only compatible with machine serial numbers beginning with 20P
The heavy-duty Velcro grip face is a vital part of your Square Scrub machine. Replace when the teeth on the Grip Face are worn. Fits 28 in. Square Scrub machines.
- 28 in. W
- Heavy-duty
- Replacement for worn grip faces
- Fits Square Scrub EBG-28
The Doodle Scrub Handle Conversion Kit relocates the wiring harness from the Doodle Scrub handle into the Doodle Scrub Base for easier maintenance. Machine serial number must be provided when ordering. This kit includes: New Doodle Scrub cover, 4 cover screws, 4 cover washers, 1 motor ground screw, 2 wire connectors, wiring harness, Doodle Scrub handle and 100% silicone.
- Kit relocates the wiring harness from the Doodle Scrub handle into the Doodle Scrub base
- Makes maintenance easier
- Machine serial number must be provided when ordering
- Kit includes: new Doodle Scrub cover, 4 cover screws, 4 cover washers, 1 motor ground screw, 2 wire connectors, wiring harness, Doodle Scrub handle and 100% silicone
This is the replacement motor for the Doodle Scrub and Doodle Mop. The Motor Replacement Kit includes: Motor, 1 shaft bolt and 4 motor bolts. Instructions can be found online on website.
- Replacement motor for the Doodle Scrub and doodle mop
- Kit includes: motor, 1 shaft bolt and 4 motor bolts
- Parts provided by Square Scrub
- Instructions can be found online at website
The Micro Switch is the ignition for the Square Scrub machine. This is an internal piece and is easily and quickly replaced. This switch works for all 20 in. and 28 in. machines.
- Ignition for the Square Scrub machine
- Internal piece
- Easily and quickly replaced
- Switch works for all 20 in. and 28 in. machines
This kit fits the Square Scrub EBG-28. The Weight Bolt Kit has been created to make this standard maintenance process easier. Items include: grip face, 2 weight bolts, 8 isolators, required hardware needed for repair and Loctite.
- Fits the Square Scrub EBG-28
- Created to make this standard maintenance process easier
- Includes: grip face, 2 weight bolts, 8 isolators, required hardware needed for repair
- Includes Loctite