The compression union is highly dependable and an economical choice of fitting within multiple applications including heating and other industrial markets. 1-piece brass body provides strength, durability and longer-lasting performance. This fitting features a vibration resistant construction. It resists mechanical pullout and is designed for high pressure service. Designed for use with potable and non-potable water, instrumentation, hydraulic and pneumatic systems.

• 1-piece brass body provides strength, durability and longer-lasting performance
• 1/4 in. O.D. tube both ends
• Designed for use with aluminum, copper and plastic tubing; plastic tubing requires NPT insert and opt sleeve; not intended for steel tubing
• Designed for use with potable and non-potable water, instrumentation, hydraulic and pneumatic systems
• Plastic and PEX tubing installations require sleeves and/or inserts; check installation instructions for exact requirements
• May be used in both indoors and outdoors
• Temperature rating: -65F to 250F at maximum operating pressures
• No-lead certified

The compression union is highly dependable and an economical choice of fitting within multiple applications including heating and other industrial markets. 1-piece brass body provides strength, durability and longer-lasting performance. This fitting features a vibration resistant construction. It resists mechanical pullout and is designed for high pressure service. Designed for use with potable and non-potable water, instrumentation, hydraulic and pneumatic systems.

• 1-piece brass body provides strength, durability and longer-lasting performance
• 3/8 in. O.D. tube both ends
• Designed for use with aluminum, copper and plastic tubing; plastic tubing requires NPT insert and opt sleeve; not intended for steel tubing
• Designed for use with potable and non-potable water, instrumentation, hydraulic and pneumatic systems
• Little to no tube preparation required; connection does not require flaring, soldering or other types of tube preparation
• Plastic and PEX tubing installations require sleeves and/or inserts; check installation instructions for exact requirements
• May be used in both indoors and outdoors
• Temperature rating: -65 degree F to 250 degree F at maximum operating pressures

This BrassCraft 3/8 in. x 3/8 in. x 3/8 in. Brass Compression X Compression T-fitting provides a dual outlet for a water supply valve allowing 2 supply lines to be connected.

• Machined from solid brass
• Adds another outlet to a water supply valve providing dual outlet capabilities so that two supply lines can be connected to the valve
• Compression connections
• 125 psi maximum working pressure
• Compliant to section ab1953/5152 of the California and Vermont legislation effective January 2010

BrassCraft compression adaptor is machined from brass. Compression fittings are ideal for use in plumbing, instrumentation, hydraulic and pneumatic systems (gasoline, grease, oil, potable and non-potable water, vacuum and air lines). Can be used to install copper, aluminum, or plastic tubing. Not recommended for use with steel tubing.

• 1-piece brass body provides strength, durability and longer-lasting performance
• 3/8 in. O.D. tube x 1/2 in. MIP
• Designed for use with aluminum and copper tubing; not recommended for steel tubing
• Designed for use with potable and non-potable water, instrumentation, hydraulic and pneumatic systems
• Little to no tube preparation required; connection does not require flaring, soldering, or other types of tube preparation
• Plastic and PEX tubing installations require sleeves and/or inserts; check installation instructions for exact requirements

This BrassCraft 3/8 in. x 3/8 in. x 1/4 in. Compression x Compression T-Fitting adds another outlet to a water supply valve allowing 2 supply lines to be connected. This fitting is made from solid brass. 3/8 in. O.D. Tube x 3/8 in. O.D. Tube x 1/4 in. Female Comp Nut.

• One-piece brass body provides strength, durability and longer-lasting performance
• 3/8 in. OD Tube x 3/8 in. OD Tube x 1/4 in. Female Comp Nut
• Designed for use with potable and non-potable water, instrumentation, hydraulic and pneumatic systems
• Designed for use with aluminum and copper tubing. Not recommended for steel tubing
• Plastic and PEX tubing installations require sleeves and/or inserts. Check installation instructions for exact requirements
• Brass construction
• Little to no tube preparation required, connection does not require flaring, solderingor other types of tube preparation
• 40 degree to 180 degree F at maximum operating pressures
• Working pressure: 400 psi
• No-lead certified

BrassCraft compression adaptor is machined from brass. Compression fittings are ideal for use in plumbing, instrumentation, hydraulic and pneumatic systems (gasoline, grease, oil, potable and non-potable water, vacuum and air lines). Can be used to install copper, aluminum, or plastic tubing. Not recommended for use with steel tubing.

• Brass construction
• 3/8 in. O.D. tube x 1/2 in. FIP
• Designed for use with aluminum, copper and plastic tubing; not intended for use with steel tubing
• Designed for use with potable and non-potable water, instrumentation, hydraulic and pneumatic systems
• Little to no tube preparation required; connection does not require flaring, soldering, or other types of tube preparation
• May be used in both indoors and outdoors
• Temperature rating: -65 deg. F to 250 deg. F at maximum operating pressures
• For use with natural, manufactured, mixed, liquefied petroleum gases and LP gas-air mixtures
• Maximum 200 psi

The compression union is highly dependable and an economical choice of fitting within multiple applications including heating and other industrial markets. 1-piece brass body provides strength, durability and longer-lasting performance. This fitting features a vibration resistant construction. It resists mechanical pullout and is designed for high pressure service. Designed for use with potable and non-potable water, instrumentation, hydraulic and pneumatic systems.

• 1-piece brass body provides strength, durability and longer-lasting performance
• 5/8 in. O.D. tube, both ends
• Designed for use with aluminum and copper tubing; not recommended for steel tubing
• Designed for use with potable and non-potable water, instrumentation, hydraulic and pneumatic systems
• Little to no tube preparation required; connection does not require flaring, soldering, or other types of tube preparation
• Plastic and PEX tubing installations require sleeves and/or inserts; check installation instructions for exact requirements
• Temperature rating: -65 degree F to 250 degree F at maximum operating pressures

The compression union is highly dependable and an economical choice of fitting within multiple applications including heating and other industrial markets. 1-piece brass body provides strength, durability and longer-lasting performance. This fitting features a vibration resistant construction. It resists mechanical pullout and is designed for high pressure service. Designed for use with potable and non-potable water, instrumentation, hydraulic and pneumatic systems.

• 1-piece brass body provides strength, durability and longer-lasting performance
• 3/8 in. O.D. tube x 1/4 in. O.D. tube
• Designed for use with aluminum, copper and plastic tubing; plastic tubing requires NPT insert and opt sleeve; not intended for steel tubing
• Designed for use with potable and non-potable water, instrumentation, hydraulic and pneumatic systems
• Little to no tube preparation required; connection does not require flaring, soldering, or other types of tube preparation
• Plastic and PEX tubing installations require sleeves and/or inserts; check installation instructions for exact requirements
• May be used in both indoors and outdoors
• Temperature rating: -65 degree F to 250 degree F at maximum operating pressures
• No-lead certified

This BrassCraft compression male reducing elbows is designed to be used with potable and non-potable water, instrumentation, hydraulic and pneumatic systems. With a strong brass, one-piece body, it is engineered to endure temperature ranging -65°F to 250°F. The maximum operating pressure for this item is 200 psi. It is easy to use, requiring little to no tube preparation. Installation instructions are included.

• Brass construction
• For 3/8 in. O.D. tube
• Designed for use with aluminum and copper tubing, not recommended for steel tubing
• Designed for use with potable and non-potable water, instrumentation, hydraulic and pneumatic systems
• Plastic and PEX tubing installations require sleeves and/or inserts
• Temperature rating: -65°F to 250°F at maximum operating pressures
• Brass/rough

BrassCraft commercial gas connecting products provide the solutions you need for the commercial kitchen - from gas connectors, to fittings, ball valves and retraining kits. Safe, flexible connections provide what kitchens need to run smoothly and safely. Use in combination with brass, copper and iron pipe.

• Use where inlet is smaller than the gas supply
• Temperature rating: 32 degree F to 125 degree F
• Maximum operating pressure: 1/2 psi
• Rough in finish
• Designed for use with brass, copper or iron pipe
• 3/4 in. MIP x 1/2 in. FIP