Introducing the world's smallest commercial grade desiccant dehumidifiers - Ecor Pro's EPD30 and EPD50 feature a patented drying technology using ZEOLITE absorption material. Moisture is simply vented away without the use of compressors, water pumps and containers. Both EPD30 and EPDS0 are using 3-hole system - the wet air that is drawn into the unit is filtered and cleaned, then the air is separated - 85% of the dry, cleaned air is exhausted out while the remaining 15% is used to exhaust water as Nano Mist to the outside. Unlike most compressor dehumidifiers, the EPD30 and EPD50 are not affected by power cuts and operates automatically, rated for 24-hours a day usage. EPD30 and EPDS0 can work upside down or on their sides to enable to easily mount on ceilings and walls. Traditional refrigerant dehumidifiers are prone to stop working in cold and hot environments, while Ecor Pro's unique technology can pull moisture from 104 degree F all the way down to minus 4 degree F room temperature, making it 4 times better at drying the home than a compressor unit. Better performance means better energy efficiency and more cost savings. Almost the size of a shoe box, these dehumidifiers are easy to carry and can be placed in many small and hard to reach spaces such as inside ceilings, crawl spaces, attics, cabinets, cupboards or shelves where moisture is an issue.

• Self-Regulating: Simply turn it on and set it to your desired humidity level. It tests your air and adjusts as needed to maintain the set humidity level. It's designed to be turned on at all times - but requires no extra work from you.
• Large Operating Range: Since it uses a desiccant wheel (without a compressor), this dehumidifier is effective in areas without heat. Use it in temperatures from -4 degrees F to 104 degrees F.
• Long Power Cord: This dehumidifier uses a standard 120-volt outlet and includes a 15-foot power cord with purchase.
• Auto Restart: If power is lost during operation, this dehumidifier will restart at its previous settings once power is restored.
• Lightweight and Easy to Install: Since this desiccant dehumidifier only weighs 11 pounds, one person can easily move and install it.
• Steel Design: Its interior and exterior are designed with steel for long-term use and to stand up to tough conditions.
• Common Uses: Cold basements and other areas without access to heat, storage facilities, building maintenance, flood drying.
• Can be placed on the floor and can also be mounted on walls or the ceiling.
• Easy access to key parts for easy repair and maintenance
• Auto reset after power out
• Reticulated dust filter in metal frame can be shaken clean or replaced quickly, prevents dust particles from entering the unit and impeding performance of the machine
• DIY Installation: Professional installation isn"t required, but be sure to follow installation instructions closely.
• Five-inch in and out ducts pull in and push out dry air into your location, while a 1.5-inch duct delivers moisturized air outside.
• Ideal for tough environmental conditions without access to heat, the Ecor Pro EPD50 is perfect for commercial or residential areas up to 1,000 square feet.
• Its versatile design allow for continuous use since this Ecor Pro desiccant dehumidifier automatically adjusts to conserve energy.

Introducing the world's smallest commercial grade desiccant dehumidifiers Ecor Pro's EPD30 and EPD50 feature a patented drying technology using ZEOLITE absorption material. Moisture is simply vented away without the use of compressors, water pumps and containers. Both EPD30 and EPDS0 are using 3-hole system - the wet air that is drawn into the unit is filtered and cleaned, then the air is separated 85% of the dry, cleaned air is exhausted out while the remaining 15% is used to exhaust water as Nano Mist to the outside. Unlike most compressor dehumidifiers, the EPD30 and EPD50 are not affected by power cuts and operates automatically, rated for 24-hours a day usage. EPD30 and EPDS0 can work upside down or on their sides to enable to easily mount on ceilings and walls. Traditional refrigerant dehumidifiers are pr1 to stop working in cold and hot environments, while Ecor Pro's unique technology can pull moisture from 104 degree F all the way down to minus 4 degree F room temperature, making it 4 times better at drying the home than a compressor unit. Better performance means better energy efficiency and more cost savings. Almost the size of a shoe box, these dehumidifiers are easy to carry and can be placed in many small and hard to reach spaces. Stainless steel PRO's are ideal to keep kitchens and public washrooms dry and can be great for freezer ice production and boat protection. Use the stainless-steel versions to keep boats dry as salt can be highly corrosive to casings.

• Self-Regulating: Simply turn it on and set it to your desired humidity level. It tests your air and adjusts as needed to maintain the set humidity level. It's designed to be turned on at all times - but requires no extra work from you.
• Large Operating Range: Since it uses a desiccant wheel (without a compressor), this dehumidifier is effective in areas without heat. Use it in temperatures from -4 degrees F to 104 degrees F.
• Long Power Cord: This dehumidifier uses a standard 120-volt outlet and includes a 15-foot power cord with purchase.
• Auto Restart: If power is lost during operation, this dehumidifier will restart at its previous settings once power is restored.
• Lightweight and Easy to Install: Since this desiccant dehumidifier only weighs 11 pounds, one person can easily move and install it.
• Steel Design: Its interior and exterior are designed with steel for long-term use and to stand up to tough conditions.
• Common Uses: Cold basements and other areas without access to heat, storage facilities, building maintenance, flood drying.
• Can be placed on the floor and can also be mounted on walls or the ceiling.
• Easy access to key parts for easy repair and maintenance
• Auto reset after power out
• Reticulated dust filter in metal frame can be shaken clean or replaced quickly, prevents dust particles from entering the unit and impeding performance of the machine
• DIY Installation: Professional installation isn"t required, but be sure to follow installation instructions closely.
• Five-inch in and out ducts pull in and push out dry air into your location, while a 1.5-inch duct delivers moisturized air outside.
• Ideal for tough environmental conditions without access to heat, the Ecor Pro EPD50 is perfect for commercial or residential areas up to 1,000 square feet.
• Its versatile design allow for continuous use since this Ecor Pro desiccant dehumidifier automatically adjusts to conserve energy.

Introducing the world's smallest commercial grade desiccant dehumidifiers - Ecor Pro's EPD30 and EPD50 feature a patented drying technology using ZEOLITE absorption material. Moisture is simply vented away without the use of compressors, water pumps and containers. Both EPD30 and EPDS0 are using 3-hole system - the wet air that is drawn into the unit is filtered and cleaned, then the air is separated - 85% of the dry, cleaned air is exhausted out while the remaining 15% is used to exhaust water as Nano Mist to the outside. Unlike most compressor dehumidifiers, the EPD30 and EPD50 are not affected by power cuts and operates automatically, rated for 24-hours a day usage. EPD30 and EPDS0 can work upside down or on their sides to enable to easily mount on ceilings and walls. Traditional refrigerant dehumidifiers are prone to stop working in cold and hot environments, while Ecor Pro's unique technology can pull moisture from 104 degree F all the way down to minus 4 degree F room temperature, making it 4 times better at drying the home than a compressor unit. Better performance means better energy efficiency and more cost savings. Almost the size of a shoe box, these dehumidifiers are easy to carry and can be placed in many small and hard to reach spaces such as inside ceilings, crawl spaces, attics, cabinets, cupboards or shelves where moisture is an issue.

• Large Operating Range: Since it uses a desiccant wheel (without a compressor), this dehumidifier is effective in areas without heat. Use it in temperatures from -4 degrees F to 104 degrees F.
• Self-Regulating: Simply turn it on and set it to your desired humidity level. It tests your air and adjusts as needed to maintain the set humidity level. It's designed to be turned on at all times - but requires no extra work from you.
• Versatile Ducted Solution: While you can place it on the floor, this 11-pound dehumidifier can be mounted on walls or the ceiling. Five-inch in and out ducts pull in and push out dry air into your location, while a 1.5-inch duct delivers moisturized air outside.
• Long Power Cord: This dehumidifier uses a standard 120-volt outlet and includes a 15-foot power cord with purchase.
• Auto Restart: If power is lost during operation, this dehumidifier will restart at its previous settings once power is restored.
• Lightweight and Easy to Install: Since this desiccant dehumidifier only weighs 11 pounds, one person can easily move and install it.
• Steel Design: Its interior and exterior are designed with steel for long-term use and to stand up to tough conditions.
• DIY Installation: Professional installation isn't required, but be sure to follow installation instructions closely.
• Common Uses: Cold basements and other areas without access to heat, storage facilities, building maintenance, flood drying.
• This Ecor Pro EPD30 dehumidifier removes 16 pints of moisture per day and is ideal for use in rooms up to 500 square feet.
• The Ecor Pro EPD30 is a one-of-a-kind desiccant dehumidifier for long-term moisture removal from residential and commercial spaces.
• Designed for use anywhere - on the floor, walls, or ceiling - this Ecor Pro desiccant dehumidifier effectively pulls moisture from rooms.

Introducing Ecor Pro's unique, patented, compressor-less, desiccant dehumidifiers for residential and commercial drying applications. Designed to work anywhere safely all day and every day. With our newly innovated and patented DryFan Zeolite Technology, moisture can be vented outside with the unit placed in any direction, as well as eliminating water containers, pumps and hoses that were included in traditional obsolete dehumidifiers. EPD150 uses a 3-hole system - the wet air that is drawn into the unit is filtered and cleaned, then the air is separated - 85% of the dry, cleaned air is exhausted out while the remaining 15% is used to exhaust water as Nano Mist to the outside. EPD150 desiccant dehumidifiers can work upside down or on their sides to enable easy mounting to ceilings and walls. Traditional refrigerant dehumidifiers are prone to stop working in cold environments, while Ecor Pro's desiccant dehumidifiers can pull moisture even at below 0 degree F room temperature. Compact and lightweight, almost a third of the size of comparable dehumidifiers, making the units easy to carry in 1 hand and transported from jobsite to jobsite. Typical applications include moisture and rust protection, warehouse storage, food and timber drying, car garages, hotels, offices, workshops, large homes and food storages.

• Install it Anywhere: The Ecor Pro EPD150 was designed to work upside down, on its side, mounted to a wall or ceiling, or used as a freestanding unit on the ground. A replaceable 15-foot power cord is included with purchase.
• Compact and Simple to Move: Its compact (13.58 x 13.86 x 24.8 in.) and lightweight (39 pounds) design makes it easy to transport from site to site. It's 1/3 the size of comparable compressor dehumidifiers and also includes carrying handles.
• Ducting Option: Add 5-inch flex or hard ducting as needed for certain jobs where you won't place it in rooms that need dehumidification.
• Common Applications: Moisture and rust protection, warehouse storage, food drying, car garages, hotels, workshops, freezers to reduce ice build-up, and large homes for permanent use.
• No compressor means it works down to -4 degrees F.
• Simply turn it on, and it self-regulates to maintain a healthy humidity.
• Long and Replaceable Power Cord: This dehumidifier uses a standard 120-volt outlet and includes a 15-foot power cord with purchase.
• Auto Restart: If power is lost during operation, this dehumidifier will restart at its previous settings once power is restored.
• Steel Design: Its interior and exterior are designed with steel for long-term use and to stand up to tough conditions.
• Triple Safety Sensors: Sensors ensure it never overheats, while leaking isn't a problem since there's no collection bucket.
• Dust Filter: A dust filter sits in a metal frame that can easily be shaken clean.
• Large Operating Temperature: Use this impressive dehumidifier in temperatures between -4 and 104 degrees F.
• Quiet Operation: Since it doesn't have a compressor, it's quieter than comparable models and is rated at 56 dB.
• Self-Regulating Moisture Removal: Its fan auto-regulates to maximize efficiency even after ducting has been added.
• Its desiccant rotor absorbs moisture with a vast surface area, which makes for efficient collection.
• This Ecor Pro desiccant dehumidifier removes 150 pints of moisture per day and can be used in spaces up to 2,000 square feet.
• DIY Installation: Professional installation isn't required, but be sure to follow installation instructions closely.

Introducing Ecor Pro's unique, patented, compressor-less, desiccant dehumidifiers for residential and commercial drying applications. Designed to work anywhere safely all day and every day. With our newly innovated and patented DryFan Zeolite Technology, moisture can be vented outside with the unit placed in any direction, as well as eliminating water containers, pumps and hoses that were included in traditional obsolete dehumidifiers. EPD150 uses a 3-hole system - the wet air that is drawn into the unit is filtered and cleaned, then the air is separated - 85% of the dry, cleaned air is exhausted out while the remaining 15% is used to exhaust water as Nano Mist to the outside. EPD150 desiccant dehumidifiers can work upside down or on their sides to enable easy mounting to ceilings and walls. Traditional refrigerant dehumidifiers are prone to stop working in cold environments, while Ecor Pro's desiccant dehumidifiers can pull moisture even at below 0 degree F room temperature. Compact and lightweight, almost a third of the size of comparable dehumidifiers, making the units easy to carry in 1 hand and transported from jobsite to jobsite. Stainless steel PRO version is ideal for water damage restoration, cold room and freezer ice production and boat protection.

• Install it Anywhere: The Ecor Pro EPD150 was designed to work upside down, on its side, mounted to a wall or ceiling, or used as a freestanding unit on the ground. A replaceable 15-foot power cord is included with purchase.
• Compact and Simple to Move: Its compact (13.58 x 13.86 x 24.8 in.) and lightweight (39 pounds) design makes it easy to transport from site to site. It's 1/3 the size of comparable compressor dehumidifiers and also includes carrying handles.
• Ducting Option: Add 5-inch flex or hard ducting as needed for certain jobs where you won't place it in rooms that need dehumidification.
• Long and Replaceable Power Cord: This dehumidifier uses a standard 120-volt outlet and includes a 15-foot power cord with purchase.
• Auto Restart: If power is lost during operation, this dehumidifier will restart at its previous settings once power is restored.
• Steel Design: Its interior and exterior are designed with steel for long-term use and to stand up to tough conditions.
• Triple Safety Sensors: Sensors ensure it never overheats, while leaking isn't a problem since there's no collection bucket.
• Dust Filter: A dust filter sits in a metal frame that can easily be shaken clean.
• Large Operating Temperature: Use this impressive dehumidifier in temperatures between -4 and 104 degrees F.
• Quiet Operation: Since it doesn't have a compressor, it's quieter than comparable models and is rated at 56 dB.
• Self-Regulating Moisture Removal: Its fan auto-regulates to maximize efficiency even after ducting has been added.
• DIY Installation: Professional installation isn"t required, but be sure to follow installation instructions closely.
• How it works: Air is brought into the unit, then 85% of the dry air is pushed back into the space, while 15% of the air is used to exhaust water as Nano Mist outside.
• This Ecor Pro desiccant dehumidifier removes 150 pints of moisture per day and can be used in spaces up to 2,000 square feet.
• Its desiccant rotor absorbs moisture with a vast surface area, which makes for efficient collection.
• Common Uses: Sea vessels and other areas near salt water since, catering and frozen food industries, water damage restoration and construction, crawl spaces and basements without access to heat, schools, hotels, restaurants and other commercial areas.
• No pumps, hoses, water leaks or water containers since it exhausts out all moisture. No compressor means it works down to -4 degrees F.
• Simply turn it on, and it self-regulates to maintain a healthy humidity.

Introducing the world's smallest commercial grade desiccant dehumidifiers Ecor Pro's EPD30 and EPD50 feature a patented drying technology using ZEOLITE absorption material. Moisture is simply vented away without the use of compressors, water pumps and containers. Both EPD30 and EPDS0 are using 3-hole system - the wet air that is drawn into the unit is filtered and cleaned, then the air is separated - 85% of the dry, cleaned air is exhausted out while the remaining 15% is used to exhaust water as Nano Mist to the outside. Unlike most compressor dehumidifiers, the EPD30 and EPD50 are not affected by power cuts and operates automatically, rated for 24-hours a day usage. EPD30 and EPDS0 can work upside down or on their sides to enable to easily mount on ceilings and walls. Traditional refrigerant dehumidifiers are pr1 to stop working in cold and hot environments, while Ecor Pro's unique technology can pull moisture from 104 degree F all the way down to minus 4 degree F room temperature, making it 4 times better at drying the home than a compressor unit. Better performance means better energy efficiency, more cost savings. Almost the size of a shoe box, these dehumidifiers are easy to carry and can be placed in many small and hard to reach spaces. Stainless steel PRO's are ideal to keep kitchens and public washrooms dry and can be great for freezer ice production and boat protection. Use the stainless-steel versions to keep boats dry as salt can be highly corrosive to casings.

• Large Operating Range: Since it uses a desiccant wheel (without a compressor), this dehumidifier is effective in areas without heat. Use it in temperatures from -4 degrees F to 104 degrees F.
• Self-Regulating: Simply turn it on and set it to your desired humidity level. It tests your air and adjusts as needed to maintain the set humidity level. It's designed to be turned on at all times - but requires no extra work from you.
• Versatile Ducted Solution: While you can place it on the floor, this 11-pound dehumidifier can be mounted on walls or the ceiling. Five-inch in and out ducts pull in and push out dry air into your location, while a 1.5-inch duct delivers moisturized air outside.
• Long Power Cord: This dehumidifier uses a standard 120-volt outlet and includes a 15-foot power cord with purchase.
• Lightweight and Easy to Install: Since this desiccant dehumidifier only weighs 11 pounds, one person can easily move and install it.
• Steel Design: Its interior and exterior are designed with steel for long-term use and to stand up to tough conditions.
• DIY Installation: Professional installation isn't required, but be sure to follow installation instructions closely.
• Common Uses: Cold basements and other areas without access to heat, storage facilities, building maintenance and flood drying.
• This Ecor Pro EPD30 dehumidifier removes 16 pints of moisture per day and is ideal for use in rooms up to 500 square feet.
• Designed for use anywhere - on the floor, walls, or ceiling - this Ecor Pro desiccant dehumidifier effectively pulls moisture from rooms.
• Whisper quiet operation - 49dB at 3 ft. sound pressure
• Built-in humidistat that can be user set
• Flat handle can be extended to allow for easy carrying in 1-hand
• Anti scratch plastic feet can be swiveled out to make 4 anchor points for wall or ceiling mounting
• Easy access to key parts for easy repair and maintenance
• Auto reset after power out
• Reticulated dust filter in metal frame can be shaken clean or replaced quickly, prevents dust particles from entering the unit and impeding performance of the machine

Introducing Ecor Pro's unique, patented, compressor-less, desiccant dehumidifiers for residential and commercial drying applications. Designed to work anywhere safely all day and every day. With our newly innovated and patented DryFan Zeolite Technology, moisture can be vented outside with the unit placed in any direction, as well as eliminating water containers, pumps and hoses that were included in traditional obsolete dehumidifiers. The EPD200 uses a 4-hole system. This 4-hole system is more effective at drying - firstly, all the dry Process air is passed back into the room and secondly, Regen air from outside of the room may be relatively wet. The EPD200 desiccant dehumidifier can work upside down or on it's side to enable easy mounting to ceilings and walls. Traditional refrigerant dehumidifiers are prone to stop working in cold environments, while Ecor Pro's desiccant dehumidifiers can pull moisture even at below 0 degree F room temperature. Compact and lightweight, almost a third of the size of comparable dehumidifiers, making the units easy to carry in 1 hand and transported from jobsite to jobsite. Typical applications include moisture and rust protection, warehouse storage, food and timber drying, car garages, hotels, offices, workshops, large homes and food storages.

• Install it Anywhere: The Ecor Pro EPD200 was designed to work upside down, on its side, mounted to a wall or ceiling, or used as a freestanding unit on the ground. A replaceable 15-foot power cord is included with purchase.
• Compact and Simple to Move: Its compact (13.58 x 13.86 x 30.8 in.) and lightweight (45 pounds) design makes it easy to transport from site to site. It's 1/3 the size of comparable compressor dehumidifiers and also includes carrying handles.
• Ducting Option: Add 5-inch flex or hard ducting as needed for certain jobs where you won't place it in rooms that need dehumidification.
• Pressure-Neutral Drying: This powerful model uses a second fan to exhaust out moisturized air, meaning pressure-neutral drying since the usable dry air never crosses with the exhaust air.
• No pumps, hoses, water leaks or water containers since it exhausts out all moisture.
• No compressor means it works down to -4 degrees F.
• Simply turn it on, and it self-regulates to maintain a healthy humidity without wasting energy.
• Long and Replaceable Power Cord: This dehumidifier uses a standard 120-volt outlet and includes a 15-foot power cord with purchase.
• Auto Restart: If power is lost during operation, this dehumidifier will restart at its previous settings once power is restored.
• Steel Design: Its interior and exterior are designed with steel for long-term use and to stand up to tough conditions.
• Triple Safety Sensors: Sensors ensure it never overheats, while leaking isn't a problem since there's no collection bucket.
• Dust Filter: A dust filter sits in a metal frame that can easily be shaken clean.
• Large Operating Temperature: Use this impressive dehumidifier in temperatures between -4 and 104 degrees F.
• Quiet Operation: Since it doesn't have a compressor, it's quieter than comparable models and is rated at 56 dB.
• Self-Regulating Moisture Removal: Its fan auto-regulates to maximize efficiency even after ducting has been added.
• Moisture and rust protection, warehouse storage, food drying, car garages, hotels, workshops, freezers to reduce ice build-up, and large homes for permanent use. Its desiccant rotor absorbs moisture with a vast surface area, which makes for efficient collection.
• This Ecor Pro desiccant dehumidifier offers 309 CFMs of power, removes 200 pints of moisture per day and can be used in spaces up to 3,000 square feet.
• DIY Installation: Professional installation isn't required, but be sure to follow installation instructions closely.

Introducing Ecor Pro's unique, patented, compressor-less, desiccant dehumidifiers for residential and commercial drying applications. Designed to work anywhere safely all day and every day. With our newly innovated and patented DryFan Zeolite Technology, moisture can be vented outside with the unit placed in any direction, as well as eliminating water containers, pumps and hoses that were included in traditional obsolete dehumidifiers. The EPD200 uses a 4-hole system. This 4-hole system is more effective at drying - firstly, all the dry Process air is passed back into the room and secondly, Regen air from outside of the room may be relatively wet. The EPD200 desiccant dehumidifier can work upside down or on it's side to enable easy mounting to ceilings and walls. Traditional refrigerant dehumidifiers are prone to stop working in cold environments, while Ecor Pro's desiccant dehumidifiers can pull moisture even at below 0 degree F room temperature. Compact and lightweight, almost a third of the size of comparable dehumidifiers, making the units easy to carry in 1 hand and transported from jobsite to jobsite. Stainless steel PRO version is ideal for water damage restoration, cold room and freezer ice production and boat protection.

• AC and DC Power Supply: A 15-foot 120-volt power cord that plugs directly into an outlet is included, but it can also be run on a 12-volt AC converter.
• Pressure-Neutral Drying: Ideal for drying large cold areas like freezers, a 4-hole system allows for drying without influencing room pressure. There are two inlet and outlet vents: One set brings in air and releases dry air into your space, while the other one brings in room air to mix with moisture before being exhausted outside.
• Freestanding or Ducted Design: This versatile dehumidifier can be taken from job to job easily. Plus you can put it on the floor, wall, or ceiling. dd 5-inch flex or hard ducting as needed for certain jobs where you won't place it in rooms that need dehumidification.
• Long and Replaceable Power Cord: This dehumidifier uses a standard 120-volt outlet and includes a 15-foot power cord with purchase.
• Auto Restart: If power is lost during operation, this dehumidifier will restart at its previous settings once power is restored.
• Steel Design: Its interior and exterior are designed with steel for long-term use and to stand up to tough conditions.
• Triple Safety Sensors: Sensors ensure it never overheats, while leaking isn't a problem since there's no collection bucket.
• Dust Filter: A dust filter sits in a metal frame that can easily be shaken clean.
• Large Operating Temperature: Use this impressive dehumidifier in temperatures between -4 and 104 degrees F.
• Quiet Operation: Since it doesn't have a compressor, it's quieter than comparable models and is rated at 56 dB.
• Self-Regulating Moisture Removal: Its fan auto-regulates to maximize efficiency even after ducting has been added.
• DIY Installation: Professional installation isn"t required, but be sure to follow installation instructions closely.
• Common Uses: Sea vessels and other areas near salt water since, catering and frozen food industries, water damage restoration and construction, crawl spaces and basements without access to heat, schools, hotels, restaurants and other commercial areas.
• No pumps, hoses, water leaks or water containers since it exhausts out all moisture. No compressor means it works down to -4 degrees F.
• Designed for continuous use in tough environments. Simply turn it on, and it self-regulates to maintain a healthy humidity without wasting energy.
• This Ecor Pro desiccant dehumidifier offers 309 CFMs of power, removes 200 pints of moisture per day and can be used in spaces up to 3,000 square feet.
• Its desiccant rotor absorbs moisture with a vast surface area, which makes for efficient collection.