Searched for "39131700"
For securing EMT and rigid conduit to overhead supports, use these 3/4 in. Steel Conduit and Pipe Hangers (5-Pack). They feature speed thread with a square neck for easy assembly. For indoor and outdoor applications.
- Designed to secure and suspend EMT and rigid conduit from overhead supports
- Corrosion-resistant, zinc-plated steel construction
- Bolt contains square neck for easy assembly
- UL and CSA Listed
The 1/4 in. 1-Hole Ground Cable Straps (50-Pack) are handy for securing bare solid wire to a working surface. They are corrosion resistant for indoor or outdoor use. Easy installation.
- Straps secure bare wire to a wood, masonry or other work surface
- Compatible with EMT cable
- Made of corrosion-resistant galvanized steel
- Quick and easy to install
The 1-1/2 in. Service Entrance Cap is designed for use in an overhead service entrance. It mounts on top of EMT, rigid or intermediate metal conduit (IMC) and serves as a connecting point for wiring.
- Used as a connecting point for overhead service entrance wires
- Made of corrosion-resistant, copper-free die-cast aluminum
- Clamp-on styling
- UL and CSA listed
- Corrosion resistant
Halex 1/2 in. Insulating Bushings (10-Pack) protect wires on a threaded Rigid or Intermediary Metal Conduit (IMC). They are required by the National Electrical Code (NEC). These bushings meet UL and CSA requirements.
- Use on threaded rigid or IMC conduits to protect wires
- Indoor/outdoor use
- Made from high-impact thermoplastic that is flame retardant to 105 degree C
- UL and CSA Listed
- Required by the NEC
The Halex 1-1/4 in. - 3 in. Adjustable Wire Holder is designed to be installed below the overhead service-entrance cap as a holding device for incoming service-entrance wires. It is made of porcelain reinforced with galvanized steel. It is easy to install.
- Securely holds overhead service-entrance wires
- Made of porcelain and galvanized steel
- For indoor or outdoor use
- Installs easily in minutes
The 3/4 in. Watertight Uf Connector is a multi-purpose connector for wet settings. Use this zinc alloy fitting to connect a Uf cable to a waterproof box or to connect an SE or SEU cable to a metal enclosure. Use for indoor or outdoor applications.
- Connects a Uf cable to a waterproof box with a threaded hub
- Connects a 12/2 or 12/3 SE/SEU cable to a metal enclosure
- Die cast of high-strength zinc alloy
- UL and CSA Listed
- For indoor or outdoor applications
The #5 Conduit and Pipe Hangers are designed to secure and suspend 2 in. Rigid or EMT conduits to overhead supports. It is made of zinc-plated steel and resists corrosion. Intended for inside or outdoor use.
- Secure and suspend 2 in. rigid and EMT conduits from overhead supports
- Zinc-plated steel resists corrosion
- Compatible with #5 conduit
- UL and CSA safety listings
- For indoor or outdoor applications
- Bolt has a square neck for easy assembly
The 3/4 in. Knock-Out Seals (4-Pack) are used to cover exposed knock-out holes in steel boxes and other metal enclosures. Suitable for indoor and outdoor use. The seals are made with zinc-plated steel for strength.
- Covers exposed knock-out holes
- Corrosion-resistant zinc-plated steel construction
- For use in steel boxes and other metal enclosures
- Suitable for indoor and outdoor applications
Knock-Out Seals are designed to cover exposed knock-out holes in steel boxes and other metal enclosures. The 1/2 in. Knock-Out Seals (4-Pack) offer corrosion resistance. They are convenient and easy to use.
- Covers knock-out holes in metal enclosures
- Zinc-plated steel
- Corrosion resistant
- Designed for indoor and outdoor use
12/2 to 14/2 1-Hole Service Entrance Cable Straps (10-Pack) are a premier choice for securing service entrance cables. Attach to wood, masonry and more, inside or outdoors. They are corrosion resistant.
- Secure service entrance cables (SEU and SER) to wood, masonry or similar surfaces
- Zinc-plated, galvanized steel resists corrosion
- For indoor or outdoor applications
- Designed for quick, easy installation
The 1-1/4 in. Watertight Connector is designed to connect SE/SEU cables to metal enclosures. It can also be used to connect UF cable to a waterproof box with a threaded hub. It is die-cast of corrosion-resistant, high-strength zinc alloy and can be used indoors or outside.
- For connecting SE/SEU and UF cables to boxes in wet environments
- Made of die-cast corrosion-resistant zinc alloy
- For indoor or outdoor use
- UL and CSA listed
- Corrosion resistant
The #4 Conduit and Pipe Hangers are designed to secure and suspend 1-1/2 in., Rigid conduit to overhead supports. It is made of zinc-plated steel and resists corrosion. Intended for inside or outdoor use.
- Secure and suspend 1-1/2 in. rigid conduit from overhead supports
- Zinc-plated steel resists corrosion
- Compatible with #4 conduit
- UL and CSA safety listings
- For indoor or outdoor applications
- Bolt has a square neck for easy assembly
The 2 in. Watertight Connector is designed to connect SE/SEU cables to metal enclosures. It can also be used to connect UF cable to a waterproof box with a threaded hub. It is die-cast of corrosion-resistant, high-strength zinc alloy and can be used indoors or outside.
- For connecting SE/SEU and UF cables to boxes in wet environments
- Made of die-cast corrosion-resistant zinc alloy
- For indoor or outdoor use
- UL and CSA listed
The 1/4 in. 20-Thread Beam Clamp attaches to the outside of a beam, girder or similar structure to provide a mounting base for attachment of a conduit hanger. It eliminates the need to drill a hole through the beam. Conduit hanger can be connected directly or with a threaded rod.
- Provides a mounting base for attachment of a conduit hanger
- Corrosion-resistant galvanized-steel construction
- Clamps on the outside of the beam, no need to drill
- UL and CSA listed
Cable protector protects NMSC or raceway wires running through wood studs from accidental nail, screw or drill penetration. No fasteners needed with the cable protector. The dimension of protector is 2-9/16 in. long x 1-1/2 in. wide.
- 1/2 in. integral spikes used to mount to wood stud
- Made of pre-galvanized 0.0625 in. thick steel
- No additional hardware required
- Position protector and hammer down spurs
Carlon PVC Grey 1-gang weatherproof cover. Cover is weatherproof and UV resistant. Cover is suitable for outdoor use.
- Suitable for outdoor use
- PVC construction
- Fits 1-Gang FS boxes
- UL and ETL listed for safety
- Supplied with stainless-steel mounting screws and a gasket
The 2 in. PVC Service Entrance Cap is designed for use with Schedule 40 and Schedule 80 rigid non-metallic conduit (RNC). The cap is crafted with PVC and features an extended cap for a weather-resistant termination. It also features a removable cover with plate knockouts and radius knockouts that eliminate sharp edges and wire chafing.
- For use with schedule 40 and schedule 80 RNC
- PVC construction
- Removable cover with plate knockouts
- Radius knockouts eliminate sharp edges and wire and cable chafing
- Extended cap for a weather-resistant termination
- CSA and UL listed for safety
- Easy to install on conduit risers
The Halex #6 - #2 Wedge Clamp Connector holds triplex overhead service-entrance cable to a mounting device or building structure. It installs quickly and is corrosion resistant. It is intended for indoor or outdoor applications.
- Designed to hold triplex overhead service-entrance cable to a mounting structure
- Aluminum wedge and shell with a stainless-steel ball
- Can be used indoors or outdoors
- Corrosion resistant
- Installs quickly and easily
Our 1 in. plastic knock-out seal. This item costs less than the steel snap-in blanks and provides a safer installation. A metal blank in a plastic box or enclosure is not grounded and could become a shock hazard.
- Plastic - provides safer installation
- Black
- For knock-outs
- Trade size: 1 in.
- Dimensions: 1.500 in. x .468 in.
The 3#3 to 3#2 NM Cable 1-Hole Service Entrance Cable Straps (6-Pack) secure non-metallic cable to surfaces such as wood and masonry. The straps are made from zinc-plated steel for corrosion resistance. It is intended for indoor or outdoor use.
- Designed to secure service entrance cable to wood, masonry or a similar surface
- Made of zinc-plated steel for corrosion resistance
- 1-hole design for easy installation
- For indoor or outdoor use
The #3 Conduit and Pipe Hangers are designed to secure and suspend 1-1/4 in. Rigid or 1-1/2 in. EMT conduits to overhead supports. It is made of zinc-plated steel and resists corrosion. Intended for inside or outdoor use.
- Secure and suspend 1-1/4 in. rigid or 1-1/2 in. EMT conduit from an overhead support
- Zinc-plated steel resists corrosion
- Compatible with #3 conduit
- UL and CSA safety listings
- For indoor or outdoor applications
- Bolt has a square neck for ease of assembly
Featured Product is a 1 1/2 in. x 5 in. nail plate. It is used to protect internal wire runs from nail punctures as defined in the NEC Article 300-4. It should be used indoors only.
- For interior use
- Protect internal wires from nail punctures
- Steel construction
- Zinc-plated finish provides corrosion resistance
- Includes 100 plates
Wall Plates are used for home, commercial and industrial settings for enhanced durability and appearance. They feature a Premium North American powdercoat for corrosion resistance. Metal wallplates have a beauty, weight and feel that plastic can't replace.
- Easily primed and paintable to match or compliment walls
- Won't bow, crack or distort during installation
- Solid sound compared to thin, hollow resonance of economy plastic plates
- Fixture mount
- Includes matching screws
Add the 1-1/4 in. Service Entrance Cap to conduit that meets an overhead service entrance. This cap is made of aluminum and can be used indoors or outdoors.
- Serves as a connecting point for overhead service entrance wires on top of EMT, rigid or IMC conduit
- Copper-free die-cast aluminum resists corrosion
- UL and CSA Listed
- Clamp-on design
- For indoor or outdoor applications