Searched for "39131700"
The 1/2 in. EMT Set Screw Connectors (5-Pack) are designed to connect and effectively bond EMT conduit to steel outlet boxes, load centers and other metal enclosures. Their bodies and locknuts are made with die-cast zinc alloy for strength and their set screws are made from zinc-plated steel. Their set screws' Tri-Drive head design works with Phillips, slotted and square screwdrivers.
- Connect and effectively bond EMT conduit to steel outlet boxes, load centers and other metal enclosures
- May be used indoors and in concrete-tight applications when taped
- Body and locknut made with die-cast zinc alloy
- Set screw made with zinc-plated steel
- Tri-drive screw head design for use with Phillips, slotted and square screwdrivers
- Screw thread is designed to not vibrate loose
- Reversible locknut designed to cut through protective coatings on boxes and enclosures
- CSA and UL Listed for safety
Secure EMT conduit to wood and masonry work with this 1/2 in. EMT 1-Hole Straps (100-Pack). The steel straps are electro-plated in zinc for a corrosion-resistant design that is usable for both interior and exterior applications. These straps are UL and CSA Listed.
- Secures EMT conduit to wood, masonry or similar surfaces where load bearing is required
- Steel electroplated in zinc for corrosion resistance
- UL and CSA Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
Turn to the 1-1/4 in. EMT Compression Connectors (3-Pack) to join lengths of EMT to steel outlet boxes, load centers or other metal enclosures. Install these galvanized connectors either indoors or in concrete-tight applications. The connectors meet UL and CSA requirements.
- Connects EMT conduit to a steel outlet box, load center or other metal enclosure
- Galvanized steel resists corrosion
- CSA and UL safety listings
- For use indoors or in concrete-tight applications when taped
The 1-1/2 in. EMT 1-Hole Straps (2-Pack) are designed to attach EMT conduit to wood, masonry or similar surfaces where good load bearing is required. Snaps positively on the conduit when installed. UL and CSA listed.
- Secures EMT conduit to surfaces
- Zinc-plated steel construction
- Corrosion resistant
- Suitable for indoor and outdoor use
The corrosion-resistant 1 in. EMT 90 degree Elbow changes the direction in a run of EMT conduit but still allows for easy wire pulling thanks to a large radius. Usable indoors and outdoors. This elbow meets UL and CSA requirements.
- Enables a 90 degree change of direction in a run of EMT conduit
- Corrosion-resistant galvanized steel
- Large radius allows for easy wire pulling
- UL and CSA listings
The 1 in. EMT Set-Screw Coupling is constructed of zinc, comes with 2 screws and is for use with EMT conduit. This standard fitting is UL and CSA safety listed. This set-screw coupling is intended for indoor applications.
- Made of zinc
- Compatible with EMT conduit
- For indoor use
- UL and CSA Listed
- Comes with 2 screws
Choose 1 in. EMT Set-Screw Connectors (10-Pack) to fix EMT conduit to steel outlet boxes, load centers or other metal enclosures. Install these galvanized connectors indoors or in concrete-tight settings. These connectors meet UL and CSA requirements.
- Connects EMT conduit to a steel outlet box, load center or other metal enclosure
- Galvanized steel resists corrosion
- CSA and UL safety listings
- For indoor use or in concrete-tight applications when taped
For an EMT installation you can be confident of, use 2 in. EMT 2-Hole Straps (2-Pack). These zinc-plated straps help with load bearing when installing EMT on wood, masonry and similar surfaces. Positively snaps on the conduit.
- Secures EMT conduit to wood, masonry or a similar surface where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL and CSA Listed
- For indoor or outdoor applications
The 1 in. EMT Set-Screw Connector is male-threaded and is for use with EMT conduit. This standard fitting is made of zinc and is intended for indoor applications. This connector is both UL and CSA Listed.
- Compatible with EMT conduit
- Made of zinc
- Male threaded
- For indoor use
- UL and CSA Listed
The3/4 in. EMT Compression Coupling is made of zinc and is compatible with EMT conduit. This standard fitting is intended for indoor use. The couplings meet UL and CSA requirements.
- Compatible with EMT conduit
- Made of zinc
- For indoor use
- UL and CSA listed
The galvanized steel 1-1/4 in. EMT 90 degree Elbow is great for changing an EMT conduit path as it features a large radius for easier wire pulling. For interior or exterior use. This elbow meets UL and CSA requirements.
- Enables a 90 degree change of direction in a run of EMT conduit
- Galvanized steel for corrosion resistance
- Large radius allows for easier wire pulling
- UL and CSA listings
When you need to join 2 sections of EMT, depend on the 1 in. EMT Set Screw Coupling. This coupling is corrosion-resistant. Indoor applications only.
- Connects 2 lengths of EMT conduit
- Galvanized steel resists corrosion
- Screws made of zinc-plated steel
- UL and CSA safety listings
- For indoor use only
The 1-1/2 in. EMT Set Screw Couplings (2-Pack) are used to connect 2 lengths of EMT conduit together. The CSA listed couplings are constructed of steel and can be taped (not included) for a stronger connection. Use indoor only.
- Use to connect 2 lengths of EMT conduit together
- Steel construction
- Compatible with EMT conduit
- For indoor use
- CSA and UL Listed
The 3/4 in. EMT Compression Connector is a fitting that helps join 2 pipes together. This zinc fitting is UL and CSA Listed, is compatible with EMT conduit and is intended for indoor applications. The connector meet UL and CSA requirements.
- Compatible with EMT conduit
- Made of zinc
- For indoor use
- UL and CSA Listed
- Die-Cast Zamak Construction
- Two-Thread Locknut Won't Skip
- Concrete Tight
- Staked Screws
With the 3/4 in. EMT Set-Screw Coupling, you can safely join 2 pieces of EMT conduit together. This galvanized steel coupling is for indoor use. These couplings meet UL and CSA requirements.
- Joins 2 lengths of EMT together
- Made of galvanized steel
- UL and CSA listed
- For indoor use
These 1/2 in. 2-Hole EMT Straps (4-Pack) are designed to secure EMT conduit to wood, masonry or similar surfaces. They have a high load-bearing capacity and snap onto the conduit to hold it securely in place. Positively snaps on the conduit when installed.
- Heavy-duty straps for securing EMT conduit
- Made of corrosion-resistant zinc-plated steel
- Can be used for indoor and outdoor applications
- UL and CSA Listed
These galvanized 1/2 in. EMT Compression Connectors (5-Pack) connect EMT conduit to steel outlet boxes, load centers and other metal enclosures. Not for use in underground applications. These connectors meet UL and CSA requirements.
- Connects EMT conduit to metal enclosures such as load centers and steel outlet boxes
- Made of galvanized steel
- UL and CSA Listed
- Concrete tight when taped
The corrosion-resistant 1-1/2 in. EMT 90 degree Elbow changes conduit direction while still allowing for easy wire pulling, thanks to its large radius. Usable indoors or outdoors. This elbow meets UL and CSA requirements.
- Enables a 90 degree change of direction in a run of EMT conduit
- Made of galvanized steel for corrosion resistance
- UL and CSA Listed
- Large radius allows for easy wire pulling
Use this 1-1/4 in. EMT 2-Hole Strap when securing a length of EMT conduit. It is constructed of zinc. It is usable for both indoor and outdoor applications. This strap meets UL and CSA requirements.
- Made of zinc
- For use with EMT conduit
- UL and CSA Listed
- Usable both indoors and outdoors
- Corrosion resistant
With the 3/4 in. EMT Set-Screw Coupling, you can safely join 2-pieces of EMT conduit together. This coupling is made from galvanized steel for strength. For indoor use only.
- Joins 2 lengths of EMT together
- Made of galvanized steel
- UL and CSA Listed
- For indoor use
In wet locations, bond EMT conduit to a box or enclosure use RACO Raintight compression connectors. Offered in two styles, insulated or non-insulated. Designed to comply with current Raintight test requirements (2008 NEC 358.42 and 314.15).
- Steel construction ensures mechanical protection
- Zinc-electroplated for added corrosion protection
- Non-insulated
- Marked with "wet location" for easy inspection
- cULus
- Available in trade sizes of 1/2 in. through 4 in.
- Installed knockout seal
Couple two ends of EMT conduit in dry locations with RACO compression couplings. Provides concrete-tight connections. Suitable for applications above 600-Volt.
- Steel construction ensures mechanical protection
- Zinc-electroplated for added corrosion protection
- cULus
- Available in trade sizes of 1/2 in. through 4 in.
These Halex 3/4 in. EMT Compression Connectors with Insulated Throats (3-Pack) bond EMT conduit to metal enclosures such as outlet boxes and load centers. The reversible locknut cuts through protective coatings to ensure ground continuity. Steel-plated compression ring positively bonds conduit to the connector.
- Connects and effectively bonds EMT conduit to steel outlet boxes, load centers or other metal enclosures
- High-strength, corrosion resistant zinc alloy body, nut and locknut
- For use indoors and in concrete-tight applications
- UL and CSA listings
- Reversible locknut designed to cut through coatings on boxes and enclosures to ensure ground continuity