Searched for "39131700"
For an EMT installation you can be confident of, use 2 in. EMT 2-Hole Straps (2-Pack). These zinc-plated straps help with load bearing when installing EMT on wood, masonry and similar surfaces. Positively snaps on the conduit.
- Secures EMT conduit to wood, masonry or a similar surface where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL and CSA Listed
- For indoor or outdoor applications
These galvanized 1/2 in. EMT Compression Connectors (5-Pack) connect EMT conduit to steel outlet boxes, load centers and other metal enclosures. Not for use in underground applications. These connectors meet UL and CSA requirements.
- Connects EMT conduit to metal enclosures such as load centers and steel outlet boxes
- Made of galvanized steel
- UL and CSA Listed
- Concrete tight when taped
The 2 in. 1-Hole EMT Straps (2-Pack) are designed to secure EMT conduit to wood, masonry and other surfaces where greater load bearing is needed. They are made with corrosion-resistant galvanized steel for strength and are plated with zinc for added durability. They may be used for indoor and outdoor applications and are UL and CSA listed for safety.
- Secures EMT conduit to wood, masonry and other surfaces where greater load bearing is needed
- For indoor and outdoor applications
- Corrosion-resistant galvanized steel construction with zinc plating
- Positively snaps on the conduit when installed
- CSA and UL Listed to help ensure safety
Secure EMT conduit to wood and masonry work with this 1/2 in. EMT 1-Hole Straps (100-Pack). The steel straps are electro-plated in zinc for a corrosion-resistant design that is usable for both interior and exterior applications. These straps are UL and CSA Listed.
- Secures EMT conduit to wood, masonry or similar surfaces where load bearing is required
- Steel electroplated in zinc for corrosion resistance
- UL and CSA Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
The 3/4 in. EMT Set Screw Coupling is made of zinc and is used to join pieces of EMT piping. This standard fitting has 2 screws and is recommended for indoor use. This coupling meets UL and CSA requirements.
- Used to join EMT piping
- Made of zinc
- 2 set screws for installation
- UL and CSA Listed
Use the Halex 1-1/2 in. EMT 2-Hole Straps (25-Pack) to support electrical metallic tubing where greater load bearing is required. These straps are constructed of zinc-plated steel and are UL and CSA listed for safety. Suitable for indoor or outdoor applications.
- Designed to secure EMT conduit to wood or masonry surfaces
- Zinc-plated steel construction
- Snap-on design for easy installation
- UL and CSA safety listings
- Designed to secure emt conduit to wood, masonry, or similar surfaces where greater load bearing is required
- May be used for indoor or outdoor applications
Rely on 1 in. EMT 1-Hole Straps (4-Pack) for assurance that EMT conduit is safely installed. These zinc-plated straps snap on and help with load bearing. Positively snaps onto the conduit.
- Secures EMT conduit to wood, masonry or a similar surface where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL and CSA Listed
- For indoor or outdoor applications
When greater load bearing is required, use these 3/4 in. EMT 2-Hole Straps (4-Pack) to secure lengths of EMT conduit to surfaces such as wood or masonry work. Corrosion resistant. This two-hole strap meets UL and CSA requirements.
- Secures EMT conduit to surfaces such as wood or masonry
- Corrosion-resistant galvanized steel
- UL and CSA Listed
- Strap snaps onto the conduit when installed
The 1 in. EMT Set-Screw Connector is male-threaded and is for use with EMT conduit. This standard fitting is made of zinc and is intended for indoor applications. This connector is both UL and CSA Listed.
- Compatible with EMT conduit
- Made of zinc
- Male threaded
- For indoor use
- UL and CSA Listed
The 1 in. EMT Set-Screw Coupling is constructed of zinc, comes with 2 screws and is for use with EMT conduit. This standard fitting is UL and CSA safety listed. This set-screw coupling is intended for indoor applications.
- Made of zinc
- Compatible with EMT conduit
- For indoor use
- UL and CSA Listed
- Comes with 2 screws
The corrosion-resistant 1-1/2 in. EMT 90 degree Elbow changes conduit direction while still allowing for easy wire pulling, thanks to its large radius. Usable indoors or outdoors. This elbow meets UL and CSA requirements.
- Enables a 90 degree change of direction in a run of EMT conduit
- Made of galvanized steel for corrosion resistance
- UL and CSA Listed
- Large radius allows for easy wire pulling
The3/4 in. EMT Compression Coupling is made of zinc and is compatible with EMT conduit. This standard fitting is intended for indoor use. The couplings meet UL and CSA requirements.
- Compatible with EMT conduit
- Made of zinc
- For indoor use
- UL and CSA listed
Close off unused openings in junction boxes or panel boards with RACO knockout seals. Zinc steel seals provide installation integrity. Snap-in design makes installation easy.
- Snap-in feature provides quick and secure installation
- Zinc-electroplated for added corrosion protection
- 1-piece design is lightweight and easy to use
- UL Listed
- Available in trade sizes 1/2 in. through 2 in.
Couple two ends of EMT conduit in dry locations with RACO compression couplings. Provides concrete-tight connections. Suitable for applications above 600-Volt.
- Steel construction ensures mechanical protection
- Zinc-electroplated for added corrosion protection
- cULus
- Available in trade sizes of 1/2 in. through 4 in.
In wet locations, bond EMT conduit to a box or enclosure use RACO Raintight compression connectors. Offered in two styles, insulated or non-insulated. Designed to comply with current Raintight test requirements (2008 NEC 358.42 and 314.15).
- Steel construction ensures mechanical protection
- Zinc-electroplated for added corrosion protection
- Non-insulated
- Marked with "wet location" for easy inspection
- cULus
- Available in trade sizes of 1/2 in. through 4 in.
- Installed knockout seal
The 1-1/4 in. EMT Set-Screw Connector is made of zinc, has a male-threaded end and is compatible with EMT conduit. This connector is UL and CSA safety listed. This connector is intended for indoor applications.
- Compatible with EMT conduit
- Made of zinc
- For indoor use
- UL and CSA Listed
In wet locations, bond EMT conduit to a box or enclosure use RACO Raintight compression connectors. Offered in two styles, insulated or non-insulated. Designed to comply with current Raintight test requirements (2008 NEC 358.42 and 314.15).
- Steel construction ensures mechanical protection
- Zinc-electroplated for added corrosion protection
- Non-insulated
- Marked with "wet location" for easy inspection
- cULus
- Available in trade sizes of 1/2 in. through 4 in.
- Installed knockout seal
This 1/2 in. EMT Set Screw Couplings (5-Pack) are an excellent choice for joining a pair of EMT sections. They are galvanized and can be installed either indoors or in concrete. This coupling is UL safety listed.
- Connects 2-lengths of EMT conduit
- Galvanized steel resists corrosion
- UL safety listing
- For indoor use or in concrete-tight applications when taped
This 1-1/4 in. EMT Compression Couplings (2-Pack) are ideal for extending a length of EMT. They join 2 sections indoors or in concrete and are galvanized to ward off corrosion. Use these couplings indoor only or in concrete-tight applications when taped.
- Connects 2 lengths of EMT conduit
- Galvanized steel resists corrosion
- CSA and UL safety listings
- For indoor use or in concrete-tight applications when taped
For wire pulling made easy, choose the 3/4 in. 90 degree EMT Pull Elbow. A detachable cover facilitates wire pulling. The elbow's zinc alloy construction resists corrosion.
- Connects EMT conduit together at a 90 degree inside bend
- Removable aluminum cover facilitates wire pulling
- Die-cast of high-strength zinc alloy with zinc-plated steel screws for corrosion resistance
- UL and CSA Listed
- For indoor use only
The 1/2 in. EMT Compression Coupling is a standard fitting that is made of zinc and for use with EMT conduit. This coupling is UL and CSA listed. The coupling is intended for indoor applications.
- Made of zinc
- Compatible with EMT conduit
- For indoor use
- UL and CSA listed
The 3/4 in. EMT Compression Connector is a fitting that helps join 2 pipes together. This zinc fitting is UL and CSA Listed, is compatible with EMT conduit and is intended for indoor applications. The connector meet UL and CSA requirements.
- Compatible with EMT conduit
- Made of zinc
- For indoor use
- UL and CSA Listed
Connect EMT conduit with this 1-1/4 in. EMT Set Screw Couplings. They are made out of galvanized steel and are concrete tight when taped. Not for use in underground applications.
- Connects 2 lengths of EMT conduit
- Made of galvanized steel
- UL and CSA Listed
- Concrete tight when taped
- Not for use in underground applications
The 1/2 in. EMT Set-Screw Coupling is UL and CSA Listed for safety and can be used for indoor and outdoor applications. This standard fitting is made of zinc, is for use with EMT conduit and comes with 2 screws for installation. This coupling meets UL and CSA requirements. EZ Find Code E530
- Made of zinc
- Compatible with EMT conduit
- Can be used indoors and outdoors
- UL and CSA Listed
- EZ Find Code E530