Searched for "39131700"
The 1-1/4 EMT Set-Screw Coupling is constructed of zinc and is for use with EMT conduit. This standard fitting is intended for indoor applications. This coupling is UL and CSA safety listed.
- Made of zinc
- Compatible with EMT conduit
- For indoor use
- UL and CSA Listed
- Comes with 2 screws
With the 3/4 in. EMT Set-Screw Coupling, you can safely join 2-pieces of EMT conduit together. This coupling is made from galvanized steel for strength. For indoor use only.
- Joins 2 lengths of EMT together
- Made of galvanized steel
- UL and CSA Listed
- For indoor use
When you need to join lengths of EMT, look to the 1/2 in. EMT Compression Couplings (5-Pack). They are galvanized and can be used in concrete when taped. This compression coupling can be used indoor or outdoor if taped.
- Connects 2 lengths of EMT conduit
- Galvanized steel for corrosion resistance
- UL safety listing
- For indoor use and concrete-tight applications when taped
With the 1/2 in. EMT Set-Screw Coupling, you can safely join 2 pieces of EMT conduit together. This steel coupling is concrete-tight when taped. These couplings meet UL and CSA requirements.
- Joins 2 lengths of EMT together
- Made of steel electro-plated with zinc
- UL and CSA listed
- Concrete-tight when taped
Secure EMT conduit to wood and masonry work with this 1/2 in. EMT 1-Hole Straps (100-Pack). The steel straps are electro-plated in zinc for a corrosion-resistant design that is usable for both interior and exterior applications. These straps are UL and CSA Listed.
- Secures EMT conduit to wood, masonry or similar surfaces where load bearing is required
- Steel electroplated in zinc for corrosion resistance
- UL and CSA Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
The 2 in. 1-Hole EMT Straps (2-Pack) are designed to secure EMT conduit to wood, masonry and other surfaces where greater load bearing is needed. They are made with corrosion-resistant galvanized steel for strength and are plated with zinc for added durability. They may be used for indoor and outdoor applications and are UL and CSA listed for safety.
- Secures EMT conduit to wood, masonry and other surfaces where greater load bearing is needed
- For indoor and outdoor applications
- Corrosion-resistant galvanized steel construction with zinc plating
- Positively snaps on the conduit when installed
- CSA and UL Listed to help ensure safety
In wet locations, couple two ends of conduit with RACO compression couplings. Designed to comply with current Raintight test requirements (2008 NEC 358.42 and 314.15.) For easy inspection, "Wet Location" is marked on all fittings.
- Steel construction ensures mechanical protection
- Zinc-electroplated for added corrosion protection
- Marked with "wet location" for easy inspection
- cULus
- Available in trade sizes of 1/2 in. through 4 in.
To bond EMT conduit to a box or enclosure, use RACO set-screws. Provides concrete-tight connections when taped. Offered either as insulated or uninsulated. Suitable for applications above 600V.
- Steel construction ensures mechanical protection
- Zinc-electroplated for added corrosion protection
- Non-insulated
- Tri-head screws may be installed using slotted, Phillips or Robertson head screwdriver
- cULus
- Available in trade sizes of 1/2 in. through 4 in.
- 1 set-screw
- Die-Cast Zamak Construction
- Concrete Tight
In wet locations, couple two ends of conduit with RACO compression couplings. Designed to comply with current Raintight test requirements (2008 NEC 358.42 and 314.15.) For easy inspection, "Wet Location" is marked on all fittings.
- Steel construction ensures mechanical protection
- Zinc-electroplated for added corrosion protection
- Marked with "wet location" for easy inspection
- cULus
- Available in trade sizes of 1/2 in. through 4 in.
The 1-1/4 in. 1-Hole EMT Straps (4-Pack) secure EMT conduit to wood, masonry or other building surfaces. They are made of galvanized steel. They are ideal for indoor high-load-bearing applications.
- Attach conduit to indoor building surfaces in high-load-bearing applications
- Made of galvanized steel
- Compatible with EMT conduit
- UL listed
- Corrosion resistant
In wet locations, couple two ends of conduit with RACO compression couplings. Designed to comply with current Raintight test requirements (2008 NEC 358.42 and 314.15.) For easy inspection, "Wet Location" is marked on all fittings.
- Steel construction ensures mechanical protection
- Zinc-electroplated for added corrosion protection
- Marked with "wet location" for easy inspection
- cULus
- Available in trade sizes of 1/2 in. through 4 in.
These versatile 1/2 in. 1-Hole EMT Straps (4-Pack) fix EMT to a number of surface types. Zinc-plated for corrosion resistance, these straps can be installed inside or outdoors. Positively snaps onto the conduit.
- Secures EMT conduit to wood, masonry or a similar surface
- Zinc-plated steel resists corrosion
- UL and CSA safety listings
- For indoor or outdoor applications
Bond EMT conduit to a box or enclosure with RACO compression connectors. Provides concrete-tight connections. Offered in either insulated or non-insulated. Suitable for applications above 600V.
- Steel construction ensures mechanical protection
- Zinc-electroplated for added corrosion protection
- Non-insulated
- cULus
- Available in trade sizes of 1/2 in. through 4 in.
Rely on Halex 1 in. EMT 1-Hole Straps (4-Pack) for assurance that EMT conduit is safely installed. These zinc-plated straps snap on and help with load bearing. Positively snaps onto the conduit.
- Secures EMT conduit to wood, masonry or a similar surface where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL and CSA listed
- For indoor or outdoor applications
The 1-1/2 in. EMT 1-Hole Straps (2-Pack) are designed to attach EMT conduit to wood, masonry or similar surfaces where good load bearing is required. Snaps positively on the conduit when installed. UL and CSA listed.
- Secures EMT conduit to surfaces
- Zinc-plated steel construction
- Corrosion resistant
- Suitable for indoor and outdoor use
These galvanized steel 3/4 in. EMT Compression Connectors (5-Pack) connect conduit to steel outlet boxes, load centers and other metal enclosures. Not for use in underground applications. This connector meets UL requirements.
- Connects EMT conduit to metal enclosures such as load centers and steel outlet boxes
- Made of galvanized steel
- UL Listed
- Concrete tight when taped
The 1-1/4 in. EMT Set-Screw Connector is made of zinc, has a male-threaded end and is compatible with EMT conduit. This connector is UL and CSA safety listed. This connector is intended for indoor applications.
- Compatible with EMT conduit
- Made of zinc
- For indoor use
- UL and CSA Listed
With the 3/4 in. EMT Set-Screw Coupling, you can safely join 2 pieces of EMT conduit together. This galvanized steel coupling is for indoor use. These couplings meet UL and CSA requirements.
- Joins 2 lengths of EMT together
- Made of galvanized steel
- UL and CSA listed
- For indoor use
The 1 in. EMT Compression Connector is a standard fitting made of zinc and is UL and CSA Listed for safety. This connector is intended for indoor use and is compatible with EMT conduit. The Compression Connector meets UL and CSA requirements.
- Made of zinc
- For use with EMT conduit
- For indoor applications
- UL and CSA Listed
This 2 in. EMT Compression Couplings (2-Pack) join together 2 lengths of conduit. They are made of galvanized steel for corrosion resistance and are concrete tight when taped. These couplings are not for use in underground applications.
- Connects 2 lengths of EMT conduit
- Corrosion-resistant galvanized steel
- Concrete tight when taped
- Not for use in underground applications
This 3/4 in. EMT Set-Screw Connectors (25-Pack) connect EMT conduit to steel outlet boxes, load centers and other metal enclosures. They are made of galvanized steel for corrosion resistance. Use for indoor/dry location.
- Connects EMT conduit to metal enclosures such as a steel outlet box or load center
- Galvanized steel for corrosion resistance
- UL and CSA Listed
- Concrete tight when taped
- For indoor use in non-underground applications
This 1-1/2 in. EMT Compression Connector joins a run of EMT conduit to an outlet box, load center or other metal enclosure. It is made of galvanized steel and has UL and CSA listings. This is for indoor use only.
- Connects and effectively bonds EMT conduit to metal enclosures such as steel outlet boxes and load centers
- For use indoors and in concrete-tight applications
- Galvanized steel
- UL and CSA Listed
- Designed to connect and effectively bond EMT conduit to steel outlet boxes, load centers, or other metal enclosures
- May be used indoors and in concrete tight applications
Hubbell RACO is pleased to announce the introduction of a very new and innovative addition to our line of RACO Fittings -- RAINTIGHT Steel EMT Compression Fittings.
- All Steel Construction.
- Sizes are available in 1/2" to 4" Trade Sizes.
- Zinc Electroplate Finish.
- All Fittings are marked "Wet Locations".
- All Connectors are supplied with a factory installed knockout seal.
- No need to disassemble the fitting prior to installation.
- No special tools required to install.