Searched for "39131700"
The 1-1/4 EMT Set-Screw Coupling is constructed of zinc and is for use with EMT conduit. This standard fitting is intended for indoor applications. This coupling is UL and CSA safety listed.
- Made of zinc
- Compatible with EMT conduit
- For indoor use
- UL and CSA Listed
- Comes with 2 screws
With the 3/4 in. EMT Set-Screw Coupling, you can safely join 2-pieces of EMT conduit together. This coupling is made from galvanized steel for strength. For indoor use only.
- Joins 2 lengths of EMT together
- Made of galvanized steel
- UL and CSA Listed
- For indoor use
When you need to join lengths of EMT, look to the 1/2 in. EMT Compression Couplings (5-Pack). They are galvanized and can be used in concrete when taped. This compression coupling can be used indoor or outdoor if taped.
- Connects 2 lengths of EMT conduit
- Galvanized steel for corrosion resistance
- UL safety listing
- For indoor use and concrete-tight applications when taped
With the 1/2 in. EMT Set-Screw Coupling, you can safely join 2 pieces of EMT conduit together. This steel coupling is concrete-tight when taped. These couplings meet UL and CSA requirements.
- Joins 2 lengths of EMT together
- Made of steel electro-plated with zinc
- UL and CSA listed
- Concrete-tight when taped
Secure EMT conduit to wood and masonry work with this 1/2 in. EMT 1-Hole Straps (100-Pack). The steel straps are electro-plated in zinc for a corrosion-resistant design that is usable for both interior and exterior applications. These straps are UL and CSA Listed.
- Secures EMT conduit to wood, masonry or similar surfaces where load bearing is required
- Steel electroplated in zinc for corrosion resistance
- UL and CSA Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
The 1-1/2 in. EMT 1-Hole Straps (2-Pack) are designed to attach EMT conduit to wood, masonry or similar surfaces where good load bearing is required. Snaps positively on the conduit when installed. UL and CSA listed.
- Secures EMT conduit to surfaces
- Zinc-plated steel construction
- Corrosion resistant
- Suitable for indoor and outdoor use
Couple two ends of EMT conduit in dry locations with RACO compression couplings. Provides concrete-tight connections. Suitable for applications above 600-Volt.
- Steel construction ensures mechanical protection
- Zinc-electroplated for added corrosion protection
- cULus
- Available in trade sizes of 1/2 in. through 4 in.
For wire pulling made easy, choose the 3/4 in. 90 degree EMT Pull Elbow. A detachable cover facilitates wire pulling. The elbow's zinc alloy construction resists corrosion.
- Connects EMT conduit together at a 90 degree inside bend
- Removable aluminum cover facilitates wire pulling
- Die-cast of high-strength zinc alloy with zinc-plated steel screws for corrosion resistance
- UL and CSA Listed
- For indoor use only
For an EMT installation you can be confident of, use 2 in. EMT 2-Hole Straps (2-Pack). These zinc-plated straps help with load bearing when installing EMT on wood, masonry and similar surfaces. Positively snaps on the conduit.
- Secures EMT conduit to wood, masonry or a similar surface where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL and CSA Listed
- For indoor or outdoor applications
In wet locations, bond EMT conduit to a box or enclosure use RACO Raintight compression connectors. Offered in two styles, insulated or non-insulated. Designed to comply with current Raintight test requirements (2008 NEC 358.42 and 314.15).
- Steel construction ensures mechanical protection
- Zinc-electroplated for added corrosion protection
- Non-insulated
- Marked with "wet location" for easy inspection
- cULus
- Available in trade sizes of 1/2 in. through 4 in.
- Installed knockout seal
The 1/2 in. EMT Compression Coupling is a standard fitting that is made of zinc and for use with EMT conduit. This coupling is UL and CSA listed. The coupling is intended for indoor applications.
- Made of zinc
- Compatible with EMT conduit
- For indoor use
- UL and CSA listed
The 1/2 in. EMT Set-Screw Coupling is UL and CSA Listed for safety and can be used for indoor and outdoor applications. This standard fitting is made of zinc, is for use with EMT conduit and comes with 2 screws for installation. This coupling meets UL and CSA requirements. EZ Find Code E530
- Made of zinc
- Compatible with EMT conduit
- Can be used indoors and outdoors
- UL and CSA Listed
- EZ Find Code E530
This 1/2 in. EMT Set Screw Couplings (5-Pack) are an excellent choice for joining a pair of EMT sections. They are galvanized and can be installed either indoors or in concrete. This coupling is UL safety listed.
- Connects 2-lengths of EMT conduit
- Galvanized steel resists corrosion
- UL safety listing
- For indoor use or in concrete-tight applications when taped
Rely on 1 in. EMT 1-Hole Straps (4-Pack) for assurance that EMT conduit is safely installed. These zinc-plated straps snap on and help with load bearing. Positively snaps onto the conduit.
- Secures EMT conduit to wood, masonry or a similar surface where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL and CSA Listed
- For indoor or outdoor applications
1 in. EMT Compression Connector joins EMT to steel outlet boxes, load centers and other metal enclosures. This galvanized connector can be used inside or in concrete. The connector meets UL and CSA requirements.
- Connects EMT conduit to a steel outlet box, load center or other metal enclosure
- Galvanized steel resists corrosion
- UL and CSA Listed
- For indoor or concrete-tight applications
Close off unused openings in junction boxes or panel boards with RACO knockout seals. Zinc steel seals provide installation integrity. Snap-in design makes installation easy.
- Snap-in feature provides quick and secure installation
- Zinc-electroplated for added corrosion protection
- 1-piece design is lightweight and easy to use
- UL Listed
- Available in trade sizes 1/2 in. through 2 in.
The 1/2 in. EMT Compression Connector is made of zinc and is compatible with EMT conduit. The connectors meet UL and CSA requirements. This compression connector is intended for indoor applications.
- Made of zinc
- Compatible with EMT conduit
- For indoor use
- UL and CSA listed
The 1-1/4 in. 1-Hole EMT Straps (4-Pack) secure EMT conduit to wood, masonry or other building surfaces. They are made of galvanized steel. They are ideal for indoor high-load-bearing applications.
- Attach conduit to indoor building surfaces in high-load-bearing applications
- Made of galvanized steel
- Compatible with EMT conduit
- UL listed
- Corrosion resistant
Turn to the 1-1/4 in. EMT Compression Connectors (3-Pack) to join lengths of EMT to steel outlet boxes, load centers or other metal enclosures. Install these galvanized connectors either indoors or in concrete-tight applications. The connectors meet UL and CSA requirements.
- Connects EMT conduit to a steel outlet box, load center or other metal enclosure
- Galvanized steel resists corrosion
- CSA and UL safety listings
- For use indoors or in concrete-tight applications when taped
In wet locations, couple two ends of conduit with RACO compression couplings. Designed to comply with current Raintight test requirements (2008 NEC 358.42 and 314.15.) For easy inspection, "Wet Location" is marked on all fittings.
- Steel construction ensures mechanical protection
- Zinc-electroplated for added corrosion protection
- Marked with "wet location" for easy inspection
- cULus
- Available in trade sizes of 1/2 in. through 4 in.
Bond EMT conduit to a box or enclosure with RACO compression connectors. Provides concrete-tight connections. Offered in either insulated or non-insulated. Suitable for applications above 600V.
- Steel construction ensures mechanical protection
- Zinc-electroplated for added corrosion protection
- Non-insulated
- cULus
- Available in trade sizes of 1/2 in. through 4 in.
The 1/2 in. EMT Set-Screw Connector has zinc construction and is compatible with EMT conduit. This set-screw connector is male-threaded and is UL and CSA Listed. This fitting is for indoor use.
- Compatible with EMT conduit
- Made of zinc
- For indoor use
- UL and CSA Listed
This 3/4 in. EMT Set-Screw Connectors (25-Pack) connect EMT conduit to steel outlet boxes, load centers and other metal enclosures. They are made of galvanized steel for corrosion resistance. Use for indoor/dry location.
- Connects EMT conduit to metal enclosures such as a steel outlet box or load center
- Galvanized steel for corrosion resistance
- UL and CSA Listed
- Concrete tight when taped
- For indoor use in non-underground applications
- Die-Cast Zamak Construction
- Two-Thread Locknut Won't Skip
- Concrete Tight
- Staked Screws
- Die-Cast Zamak Construction
- Concrete Tight
These 1-1/2 in. EMT Set Screw Connectors join EMT to metal enclosures such as steel outlet boxes and load centers. They are made of galvanized steel. They are concrete tight when taped.
- Connects EMT conduit to metal enclosures such as load centers and steel outlet boxes
- Made of galvanized steel
- UL- and CSA Listed
- Concrete tight when taped
- Not for use in underground applications
The 1 in. EMT Set-Screw Coupling is constructed of zinc, comes with 2 screws and is for use with EMT conduit. This standard fitting is UL and CSA safety listed. This set-screw coupling is intended for indoor applications.
- Made of zinc
- Compatible with EMT conduit
- For indoor use
- UL and CSA Listed
- Comes with 2 screws
Use the 1 in. EMT Compression Couplings to connect electrical metallic conduit together. These couplings are made of corrosion-resistant steel. The couplings are UL and CSA safety listed.
- Connects 2 lengths of EMT conduit together
- Galvanized steel for corrosion resistance
- UL and CSA safety listings
- Concrete-tight when taped
- Not for use in underground applications
Use the 3/4 in. 1-Hole Conduit Straps (4-Pack) to support EMT conduits when a greater load bearing is required. The conduit straps are made of zinc-plated steel and are corrosion resistant. This strap meets UL and CSA requirements.
- Designed to secure EMT conduit to wood, masonry or a similar surface where a greater load bearing is required
- Indoor or outdoor use
- Made of zinc-plated steel
- UL and CSA Listed
- Snaps on the conduit when installed
- Corrosion resistant
In wet locations, bond EMT conduit to a box or enclosure use RACO Raintight compression connectors. Offered in two styles, insulated or non-insulated. Designed to comply with current Raintight test requirements (2008 NEC 358.42 and 314.15).
- Steel construction ensures mechanical protection
- Zinc-electroplated for added corrosion protection
- Non-insulated
- Marked with "wet location" for easy inspection
- cULus
- Available in trade sizes of 1/2 in. through 4 in.
- Installed knockout seal
The 1-1/2 in. EMT Set-Screw Connector is UL and CSA safety listed. This connector is intended for indoor applications. The connector is made of zinc, is male-threaded at 1 end and is compatible with EMT conduit.
- For indoor use
- Made of zinc
- Compatible with EMT conduit
- UL and CSA Listed
- Male-threaded end
The 1 in. EMT Set-Screw Connector is male-threaded and is for use with EMT conduit. This standard fitting is made of zinc and is intended for indoor applications. This connector is both UL and CSA Listed.
- Compatible with EMT conduit
- Made of zinc
- Male threaded
- For indoor use
- UL and CSA Listed
In wet locations, bond EMT conduit to a box or enclosure use RACO Raintight compression connectors. Offered in two styles, insulated or non-insulated. Designed to comply with current Raintight test requirements (2008 NEC 358.42 and 314.15).
- Steel construction ensures mechanical protection
- Zinc-electroplated for added corrosion protection
- Non-insulated
- Marked with "wet location" for easy inspection
- cULus
- Available in trade sizes of 1/2 in. through 4 in.
- Installed knockout seal
In wet locations, couple two ends of conduit with RACO compression couplings. Designed to comply with current Raintight test requirements (2008 NEC 358.42 and 314.15.) For easy inspection, "Wet Location" is marked on all fittings.
- Steel construction ensures mechanical protection
- Zinc-electroplated for added corrosion protection
- Marked with "wet location" for easy inspection
- cULus
- Available in trade sizes of 1/2 in. through 4 in.
Whether used outdoors or indoors, these Halex 1/2 in. EMT 2-Hole Straps (100-Pack) secure EMT conduit to wood, masonry and other similar surfaces where load bearing is needed. Snap-on style. UL and CSA listed.
- Secures EMT conduit to wood, masonry or other similar surfaces where load bearing is required
- Made of zinc-plated steel
- Corrosion resistant for indoor or outdoor use
- UL and CSA listings
This 2 in. EMT Set-Screw Connector is made of zinc and is compatible with EMT conduit. This standard fitting has 1 male-threaded end and is for indoor use. This connector is UL and CSA Listed.
- Made of zinc
- Compatible with EMT conduit
- For indoor applications
- UL and CSA Listed
- Male-threaded end
Depend on the 3/4 in. EMT Compression Couplings (5-Pack) for joining lengths of EMT conduit. These galvanized couplings can be installed either inside or in concrete if taped. These are steel with zinc electro-late.
- Connects 2 lengths of EMT conduit
- Galvanized steel resists corrosion
- CSA and UL safety listings
- For indoor use and concrete-tight applications when taped
These galvanized steel 3/4 in. EMT Compression Connectors (5-Pack) connect conduit to steel outlet boxes, load centers and other metal enclosures. Not for use in underground applications. This connector meets UL requirements.
- Connects EMT conduit to metal enclosures such as load centers and steel outlet boxes
- Made of galvanized steel
- UL Listed
- Concrete tight when taped
When you need to join 2 sections of EMT, depend on the 1 in. EMT Set Screw Coupling. This coupling is corrosion-resistant. Indoor applications only.
- Connects 2 lengths of EMT conduit
- Galvanized steel resists corrosion
- Screws made of zinc-plated steel
- UL and CSA safety listings
- For indoor use only
Choose 1 in. EMT Set-Screw Connectors (10-Pack) to fix EMT conduit to steel outlet boxes, load centers or other metal enclosures. Install these galvanized connectors indoors or in concrete-tight settings. These connectors meet UL and CSA requirements.
- Connects EMT conduit to a steel outlet box, load center or other metal enclosure
- Galvanized steel resists corrosion
- CSA and UL safety listings
- For indoor use or in concrete-tight applications when taped
The 1-1/4 in. EMT Set-Screw Connector is made of zinc, has a male-threaded end and is compatible with EMT conduit. This connector is UL and CSA safety listed. This connector is intended for indoor applications.
- Compatible with EMT conduit
- Made of zinc
- For indoor use
- UL and CSA Listed
Rely on 1-1/4 in. EMT Set-Screw Connector for excellent connections between EMT and steel outlet boxes, load centers or other metal enclosures. These galvanized connectors are for indoor or concrete-tight installation. These connectors meet UL and CSA requirements.
- Connects EMT conduit to a steel outlet box, load center or other metal enclosure
- Galvanized steel resists corrosion
- UL and CSA safety listings
- For indoor use or in concrete-tight applications when taped
To join lengths of EMT to each other, use 2 in. EMT Set-Screw Couplings (2-Pack). These galvanized couplings can be installed indoors or in concrete when taped. This coupling is CSA and UL safety listed.
- Connects 2 lengths of EMT conduit
- Galvanized steel resists corrosion
- CSA and UL safety listings
- For indoor use or in concrete-tight applications when taped
In wet locations, couple two ends of conduit with RACO compression couplings. Designed to comply with current Raintight test requirements (2008 NEC 358.42 and 314.15.) For easy inspection, "Wet Location" is marked on all fittings.
- Steel construction ensures mechanical protection
- Zinc-electroplated for added corrosion protection
- Marked with "wet location" for easy inspection
- cULus
- Available in trade sizes of 1/2 in. through 4 in.
With the 3/4 in. EMT Set-Screw Coupling, you can safely join 2 pieces of EMT conduit together. This galvanized steel coupling is for indoor use. These couplings meet UL and CSA requirements.
- Joins 2 lengths of EMT together
- Made of galvanized steel
- UL and CSA listed
- For indoor use
The 1/2 in. EMT Set Screw Connectors (5-Pack) are designed to connect and effectively bond EMT conduit to steel outlet boxes, load centers and other metal enclosures. Their bodies and locknuts are made with die-cast zinc alloy for strength and their set screws are made from zinc-plated steel. Their set screws' Tri-Drive head design works with Phillips, slotted and square screwdrivers.
- Connect and effectively bond EMT conduit to steel outlet boxes, load centers and other metal enclosures
- May be used indoors and in concrete-tight applications when taped
- Body and locknut made with die-cast zinc alloy
- Set screw made with zinc-plated steel
- Tri-drive screw head design for use with Phillips, slotted and square screwdrivers
- Screw thread is designed to not vibrate loose
- Reversible locknut designed to cut through protective coatings on boxes and enclosures
- CSA and UL Listed for safety
The3/4 in. EMT Compression Coupling is made of zinc and is compatible with EMT conduit. This standard fitting is intended for indoor use. The couplings meet UL and CSA requirements.
- Compatible with EMT conduit
- Made of zinc
- For indoor use
- UL and CSA listed