Emt Conduit Systems
Rely on 1 in. EMT 1-Hole Straps (4-Pack) for assurance that EMT conduit is safely installed. These zinc-plated straps snap on and help with load bearing. Positively snaps onto the conduit.
- Secures EMT conduit to wood, masonry or a similar surface where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL and CSA Listed
- For indoor or outdoor applications
Use the 3/4 in. 1-Hole Conduit Straps (4-Pack) to support EMT conduits when a greater load bearing is required. The conduit straps are made of zinc-plated steel and are corrosion resistant. This strap meets UL and CSA requirements.
- Designed to secure EMT conduit to wood, masonry or a similar surface where a greater load bearing is required
- Indoor or outdoor use
- Made of zinc-plated steel
- UL and CSA Listed
- Snaps on the conduit when installed
- Corrosion resistant
When greater load bearing is required, use these 3/4 in. EMT 2-Hole Straps (4-Pack) to secure lengths of EMT conduit to surfaces such as wood or masonry work. Corrosion resistant. This two-hole strap meets UL and CSA requirements.
- Secures EMT conduit to surfaces such as wood or masonry
- Corrosion-resistant galvanized steel
- UL and CSA Listed
- Strap snaps onto the conduit when installed
The 1-1/4 in. 1-Hole EMT Straps (4-Pack) secure EMT conduit to wood, masonry or other building surfaces. They are made of galvanized steel. They are ideal for indoor high-load-bearing applications.
- Attach conduit to indoor building surfaces in high-load-bearing applications
- Made of galvanized steel
- Compatible with EMT conduit
- UL listed
- Corrosion resistant
Use this 1-1/4 in. EMT 2-Hole Strap when securing a length of EMT conduit. It is constructed of zinc. It is usable for both indoor and outdoor applications. This strap meets UL and CSA requirements.
- Made of zinc
- For use with EMT conduit
- UL and CSA Listed
- Usable both indoors and outdoors
- Corrosion resistant
For an EMT installation you can be confident of, use 2 in. EMT 2-Hole Straps (2-Pack). These zinc-plated straps help with load bearing when installing EMT on wood, masonry and similar surfaces. Positively snaps on the conduit.
- Secures EMT conduit to wood, masonry or a similar surface where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL and CSA Listed
- For indoor or outdoor applications
1 in. EMT Compression Connector joins EMT to steel outlet boxes, load centers and other metal enclosures. This galvanized connector can be used inside or in concrete. The connector meets UL and CSA requirements.
- Connects EMT conduit to a steel outlet box, load center or other metal enclosure
- Galvanized steel resists corrosion
- UL and CSA Listed
- For indoor or concrete-tight applications
The 1/2 in. EMT Set Screw Connectors (5-Pack) are designed to connect and effectively bond EMT conduit to steel outlet boxes, load centers and other metal enclosures. Their bodies and locknuts are made with die-cast zinc alloy for strength and their set screws are made from zinc-plated steel. Their set screws' Tri-Drive head design works with Phillips, slotted and square screwdrivers.
- Connect and effectively bond EMT conduit to steel outlet boxes, load centers and other metal enclosures
- May be used indoors and in concrete-tight applications when taped
- Body and locknut made with die-cast zinc alloy
- Set screw made with zinc-plated steel
- Tri-drive screw head design for use with Phillips, slotted and square screwdrivers
- Screw thread is designed to not vibrate loose
- Reversible locknut designed to cut through protective coatings on boxes and enclosures
- CSA and UL Listed for safety
For wire pulling made easy, choose the 3/4 in. 90 degree EMT Pull Elbow. A detachable cover facilitates wire pulling. The elbow's zinc alloy construction resists corrosion.
- Connects EMT conduit together at a 90 degree inside bend
- Removable aluminum cover facilitates wire pulling
- Die-cast of high-strength zinc alloy with zinc-plated steel screws for corrosion resistance
- UL and CSA Listed
- For indoor use only
Secure metal conduit to indoor or outdoor wood or masonry surfaces with the 1 in. 2-Hole EMT Straps (4-Pack). These straps are made from zinc-plated steel for protection against corrosion. Snap-on installation secures conduit.
- Designed to secure EMT conduit to wood and masonry surfaces where greater load bearing is required
- Zinc-plated steel construction for corrosion resistance
- Compatible with indoor or outdoor applications
- UL and CSA safety listings
- Corrosion resistant
Rely on 1-1/2 in. 2-Hole EMT Straps (2-Pack) to fix EMT conduit to wood, masonry and other surfaces requiring extra load bearing. These straps snap onto the conduit. These straps meet UL and CSA requirements.
- Secures EMT conduit to wood, masonry or a similar surface where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL and CSA Listed
- For indoor or outdoor applications
Secure EMT conduit to wood and masonry work with this 1/2 in. EMT 1-Hole Straps (100-Pack). The steel straps are electro-plated in zinc for a corrosion-resistant design that is usable for both interior and exterior applications. These straps are UL and CSA Listed.
- Secures EMT conduit to wood, masonry or similar surfaces where load bearing is required
- Steel electroplated in zinc for corrosion resistance
- UL and CSA Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
These 1/2 in. 2-Hole EMT Straps (4-Pack) are designed to secure EMT conduit to wood, masonry or similar surfaces. They have a high load-bearing capacity and snap onto the conduit to hold it securely in place. Positively snaps on the conduit when installed.
- Heavy-duty straps for securing EMT conduit
- Made of corrosion-resistant zinc-plated steel
- Can be used for indoor and outdoor applications
- UL and CSA Listed
The 1/2 in. EMT Set-Screw Connector has zinc construction and is compatible with EMT conduit. This set-screw connector is male-threaded and is UL and CSA Listed. This fitting is for indoor use.
- Compatible with EMT conduit
- Made of zinc
- For indoor use
- UL and CSA Listed
To create a corner in EMT conduit, install the 3/4 in. 90 degree EMT Elbow. Wire pulling is easy with this elbow. It is galvanized and can be used indoors or outside.
- Creates a 90 degree change of direction in a run of EMT conduit
- Large radii allow for easier wire pulling
- Galvanized steel resists corrosion
- UL and CSA Listed
- For indoor or outdoor use
These versatile 1/2 in. 1-Hole EMT Straps (4-Pack) fix EMT to a number of surface types. Zinc-plated for corrosion resistance, these straps can be installed inside or outdoors. Positively snaps onto the conduit.
- Secures EMT conduit to wood, masonry or a similar surface
- Zinc-plated steel resists corrosion
- UL and CSA safety listings
- For indoor or outdoor applications
The 1/2 in. EMT Compression Coupling is a standard fitting that is made of zinc and for use with EMT conduit. This coupling is UL and CSA listed. The coupling is intended for indoor applications.
- Made of zinc
- Compatible with EMT conduit
- For indoor use
- UL and CSA listed
The 1-1/2 in. EMT 1-Hole Straps (2-Pack) are designed to attach EMT conduit to wood, masonry or similar surfaces where good load bearing is required. Snaps positively on the conduit when installed. UL and CSA listed.
- Secures EMT conduit to surfaces
- Zinc-plated steel construction
- Corrosion resistant
- Suitable for indoor and outdoor use
This 3/4 in. EMT Set-Screw Connectors (25-Pack) connect EMT conduit to steel outlet boxes, load centers and other metal enclosures. They are made of galvanized steel for corrosion resistance. Use for indoor/dry location.
- Connects EMT conduit to metal enclosures such as a steel outlet box or load center
- Galvanized steel for corrosion resistance
- UL and CSA Listed
- Concrete tight when taped
- For indoor use in non-underground applications
The3/4 in. EMT Compression Coupling is made of zinc and is compatible with EMT conduit. This standard fitting is intended for indoor use. The couplings meet UL and CSA requirements.
- Compatible with EMT conduit
- Made of zinc
- For indoor use
- UL and CSA listed
Choose 2 in. EMT Set-Screw Connector to fix EMT to steel outlet boxes, load centers or other metal enclosures. These galvanized connectors are for installation indoors or in concrete-tight settings. The connectors meet UL and CSA requirements.
- Connects EMT conduit to a steel outlet box, load center or other metal enclosure
- Galvanized steel resists corrosion
- UL and CSA safety listings
- For indoor use or in concrete-tight applications when taped
When load bearing is required, use these zinc-plated steel 3/4 in. EMT 1-Hole Straps (100-Pack) to secure EMT conduit to surfaces such as wood and masonry. Usable indoors and outdoors. These straps are UL and CSA listed.
- Secures EMT conduit to surfaces such as wood and masonry where load bearing is required
- Zinc-plated steel for corrosion resistance
- UL and CSA listed
- Positively snaps on conduit when installed
Make a right-angle turn in a run of EMT conduit with the 1/2 in. 90 EMT Pull Elbow. This die-cast zinc-alloy elbow includes a removable aluminum cover to aid in wire pulling. For indoor use.
- Connects 2 lengths of EMT conduit at a 90 inside bend
- Removable aluminum cover facilitates wire pulling
- Die cast of high-strength zinc alloy with zinc-plated steel screws for corrosion resistance
- UL and CSA safety listings
Rely on 1-1/4 in. EMT Set-Screw Connector for excellent connections between EMT and steel outlet boxes, load centers or other metal enclosures. These galvanized connectors are for indoor or concrete-tight installation. These connectors meet UL and CSA requirements.
- Connects EMT conduit to a steel outlet box, load center or other metal enclosure
- Galvanized steel resists corrosion
- UL and CSA safety listings
- For indoor use or in concrete-tight applications when taped