Searched for "39131700"
The Electrical Box Extender lends support to the contents of a wall box. This non-conductive extender helps prevent arcing by forming a barrier between the box and the metal screws on the device. This box extender has a 2-hour fire rating.
- Levels and supports wiring devices in an electrical box
- Helps prevent arcing by forming a barrier between a metal box and metal side screws on the device
- Heavy-duty, non-conductive plastic construction
- UL and CSA safety listings
- Complies with 2008 NEC Article 314.20
Arlington's NM940-100 is listed for use with 1 or 2 cables. The Arlington Industries Inc. black Push-in Connector is easy and fast to install. The NM940-10 is a competitively priced Arlington item.
- Arlington's black button holds wires securely and exceeds UL pullout tests
- NM940-100 material is plastic construction
- Item is the lowest cost NM cable connector available today
- NM940-100 is simple to remove with a twist of a screwdriver
Install cable with these 3/4 in. Plastic Push-In Button Connectors (25-Pack). They are designed to fit up to 2 cables at once and accept cables without resistance for a smooth installation. Simple to remove with a twist of a screwdriver.
- Made of plastic
- Listed for up to 2 cables
- UL and CSA listed
- Snaps into knockout with light finger pressure
- Cables insert easily for smooth installation
If you need a conduit fitting to protect your PVC, EMT or steel conduit, you've come to the right place. Here are some important details for HUBBELL WIRING Device-Kellems Insulated Connector. Material: Nylon, For Use With: Nonmetallic Flexible Conduit, Conduit Size: 1/2 in.
- Nylon compression nut has a tapered dome to tighten ferrule onto conduit
- Neoprene O-ring provides liquid tight seal
- Non integral ferrule provides conduit seal and pullout protection
- Fixed 90 degree fittings for non-metallic conduit
The Arlington Industries Snap-2-It 3/8 in. Connectors (5-Pack) are versatile high-quality electrical fittings designed for indoor use. These connectors are suitable for use with MC/HCF steel and aluminum cables and are fast and easy to install because there is no locknut to be loosened. The grounding tangs snap into the 1/2 in. knockout and grip the interior to form a continuous grounded path.
- Ideal for firm, dependable connections
- Die-cast zinc provides durability
- Designed for use with MC/HCF steel and aluminum cables
- Tested and Listed by UL in accordance with UL's ground-fault requirements
- Snap-2-it connectors enable quick and easy installations
Saddlegrip SNAP-TITE connector used with aluminum and steel Flex, AC and AC90 cable. May also be used with MCI and MCI-A cable. It is Zinc die-cast.
- Provided with insulated throat
- Concrete tight when taped
- SNAP-TITE products have been tested and Listed by UL in accordance with UL's ground fault requirements
- Sold in package of 50
- Cable range 0.405 to 0.612
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
Metallic Liquid-Tite Connecter 1/2"
Suitable for indoor or outdoor locations to connect flexible metallic liquidtight conduit or Type B flexible non-metallic conduit to a box or enclosure. Features our split-gland ring that ensures a liquidtight seal. Zinc electroplated for corrosion resistance.
- Steel and malleable iron construction provides raceway integrity
- Sealing washer provides a liquidtight seal when terminating the connector in a threadless opening
- Locknut provided
- Suitable for use in class 1, div 2, class 2, div 1 and 2, class 3, div 1 and 2 hazardous locations
Suitable for indoor or outdoor locations to connect flexible metallic liquidtight conduit or Type B flexible non-metallic conduit to a box or enclosure. Features our split gland ring that ensures a liquidtight seal. Zinc electroplated for corrosion resistance.
- Steel and malleable iron construction provides raceway integrity
- Sealing washer provides a liquidtight seal when terminating the connector in a threadless opening
- Locknut provided
- Suitable for use in class 1, div 2, class 2, div 1 and 2, class 3, div 1 and 2 hazardous locations
This 1/2 in. 90 degree Liquid-Tight Connector joins liquid-tight conduit with enclosures such as weatherproof outlet boxes and pool equipment motors. It is made of a zinc alloy for corrosion resistance. This connector may be used indoors or outdoors.
- Multipiece
- 90 degree bend
- Zinc die-cast
- Indoors or outdoors
Multi-Position Gray Nylon, Neoprene Sealing Ring Material, Flexible Non Metallic Liquid Tight Conduit 3/4 in. Polytuff. Swivellok Hubbell quality is the superior operation, reliable performance and dependable service which distinguish Hubbell products from others. A suitable product for your home improvement and everyday needs.
- Nylon compression nut has a tapered dome to tighten ferrule onto conduit
- Neoprene O-ring provides liquid tight seal
- Non integral ferrule provides conduit seal and pullout protection
- SwivelLok multi-position liquid tight fittings
90 degree Non-Metallic Connector for use with non-metallic liquid-tight conduit, type B only. Provides a smooth, gradual radius bend. Wiring is easily pulled or pushed through fitting and there are no sharp edges to strip wire.
- Produced from UV rated plastic for long outdoor life
- 1-1/2 in. trade size
- UL listed
- CSA listed
The Snap-Tite 3/8 in. Connectors (2-Pack) are versatile high-quality electrical fittings designed for indoor use. Snap-tite connectors are quick and easy to install because there is no locknut to be loosened. Their grounding tangs snap into the knock out and grip the interior to form a continuous, grounded path. These connectors are suitable for use with NM cables.
- Ideal for forming a continuous, grounded path
- Die-cast zinc provides durability
- Designed for use with NM cables
- Snap-tite connectors enable quick and easy installations
- Spring-steel clip for firm connections
Cable Entry device, non-metallic for low-voltage wire. Helps organize low voltage cable in a neat bundle. Also includes 2 #6 screws.
- Wall plate included
- Slotted cover that is reversible
- For use with new or existing construction
- Can be used with a low voltage mounting bracket
1-1/4 in. Straight Non-Metallic Connector for use with non-metallic liquid-tight conduit. It may be used with type B only. It is produced from UV rated plastic for long outdoor life.
- May be secured to conduit while fully assembled because of our no-spin ferrule
- Simply loosen nut and screw onto conduit
- Positive liquid-tight seal is provided by our pressure sensitive internal gland when the nut is tightened
- Liquid-tight seal is also assured between the fitting and box by a sealing ring
- 1-1/4 in. knockout
Suitable for indoor or outdoor locations to connect flexible metallic liquidtight conduit or Type B flexible non-metallic conduit to a box or enclosure. Features split gland ring that ensures a liquidtight seal. Zinc electroplated for corrosion resistance.
- Steel and malleable iron construction provides raceway integrity
- Sealing washer provides a liquidtight seal when terminating the connector in a threadless opening
- Locknut provided
- Suitable for use in class 1, div 2, class 2, div 1 and 2, class 3, div 1 and 2 hazardous locations
For securing conduit, use these Snap-Tite 3/4 in. Connectors (2-Pack). They are easy to install thanks to a simple snap-in design that goes into a knockout without the need of a locknut. Can handle up to 2 type of NM cable at one time.
- Holds conduit securely in place
- Die-cast zinc
- Accepts cable sizes ranging from 0.300 to 0.780
- Spring steel clip for non-metallic cable
- UL- and CSA listed
- Simply snaps into knockout for easy installation
The SCOOP - Reversible, Non-Metallic Cable Entrance Plates for Existing Cable is single gang and protects cable while having installation versatility. It is made of non-rusting, white paintable plastic. It can be used 2 ways - facing IN or OUT.
- Best way to cover existing cable
- Includes screws that match plate color
- Offers both cable protection and good looks
- Designed to install low voltage class 2 only
Arlington's 1 in. Non-Metallic Liquid-Tight Push-On Connector features UV-rated construction for a long-lasting, outdoor life. The CSA-Listed connector is compatible with non-metallic, type B conduit for liquid-tight connections. It has a push on installation.
- Use with non-metallic, type B conduit
- UV-rated plastic construction
- Indoor or outdoor use
- NEMA FB-1 and CSA- and UL Listed
- Liquid-tight connection
Suitable for indoor or outdoor locations to connect flexible metallic liquidtight conduit or Type B flexible non-metallic conduit to a box or enclosure. Features the split gland ring that ensures a liquidtight seal. Zinc electroplated for corrosion resistance.
- Steel and malleable iron construction provides raceway integrity
- Sealing washer provides a liquidtight seal when terminating the connector in a threadless opening
- Locknut provided
- Suitable for use in class 1, div 2, class 2, div 1 and 2, class 3, div 1 and 2 hazardous locations
The Arlington Industries 1/2 in. Weatherproof Box Holder can be used with rigid pipe to suspend electrical boxes or smoke detectors between bar joists and to position electrical enclosures above concrete slabs. This box support is simply screwed into the electrical box. Die-cast zinc construction offers superior strength and durability.
- Use with rigid pipe to suspend electrical boxes or smoke detectors between bar joists and to position electrical enclosures above concrete slabs
- Die-cast zinc construction for excellent strength and durability
- Screw directly into the electrical box
- Quick and easy to install
Non-Metallic straight snap2It connector for use with non-metallic liquid tight conduit type B only. They offer the fastest, easiest installation. You'll get a super-secure, liquid-tight seal. Plus, they are removable and reusable.
- 3/4 in. trade size
- Easy to install, pushes on to conduit, no tools
- Connectors are produced from UV rated plastic for long outdoor life
- UL CSA Listed
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit