Searched for "39131700"
This 1/2 in. Nylon Connector ensures a liquid- and oil-tight seal thanks to a sealing ring and internal grommet with gripping fingers. This connector is also low-profile and non-metallic. It supports a 0.200 to 0.472 cord range.
- Internal grommet with gripping fingers ensures a liquid- and oil-tight seal
- Sealing ring for a liquid-tight seal when installing non-threaded openings
- Great pullout resistance from simply tightening the nut
- UL and CSA Listed
- Made of nylon
The Electrical Box Extender lends support to the contents of a wall box. This non-conductive extender helps prevent arcing by forming a barrier between the box and the metal screws on the device. This box extender has a 2-hour fire rating.
- Levels and supports wiring devices in an electrical box
- Helps prevent arcing by forming a barrier between a metal box and metal side screws on the device
- Heavy-duty, non-conductive plastic construction
- UL and CSA safety listings
- Complies with 2008 NEC Article 314.20
Snap-2-It 3/8 in. Connectors (50-Pack) are fast and easy to use. Simply push the cable into the fitting and rotate it until it is tight. To remove the cable, simply turn it counterclockwise. It installs into a 1/2 in. knockout.
- Connects metallic cable quickly and easily
- Die-cast zinc construction
- Can be used with MC/HCF steel and aluminum cable, AC/HCF steel and aluminum cable, flexible steel and aluminum conduit and MC continuous corrugated aluminum cable
- UL- and CSA safety listed
- Concrete tight when taped
- 1/2 in. KO size
Snap2It Duplex Connectors for AC,MCI-A, HCF steel and aluminum cable. Flexible metal conduit steel and aluminum, MCI cable, continuous corrugated aluminum and AC90 may also be used. It includes an insulated throat.
- Tested and listed by UL in accordance with UL's ground fault requirements
- Zinc die-cast
- Concrete tight when taped
- CSA and cULus listed
Zinc grounding bridge, provides reliable intersystem bonding between power and communication grounding systems. Comes with textured, paintable white cover. Cover is UV rated plastic for long outdoor life.
- Meets 2014 NEC ground requirements
- Has 4 termination points 1 more than required by 250.94 of the 2014 NEC
- Handles multiple hookups of communication systems
- Attaches to conductor with lay in style lug with cable range #6-#2
SNAP2IT Non-Metallic Connector 3/4 in. NM liquid-tight connector. Save time and money with SNAP2IT fittings. They offer the fastest, easiest installation on Liquid-tight conduit. You'll get a super-secure, liquid-tight seal. Plus, they are removable and reusable.
- NMLT907-1 is for non-metallic liquid-tight conduit (type B)
- Easy to install, pushes on to conduit, no tools
- Connectors are produced from UV rated plastic for long outdoor life
- Item NMLT907-1 is UL CSA Listed
Southwire's Non-Metallic Liquid Tight Connectors are made to use with Type B Non-Metallic Liquid Tight Conduit. There is no threading of conduit or tubing required. Southwire's connectors give a superior liquid tight seal and pull out strength. Comes in a 20-piece carton.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
Arlington's 1/2 in. Non-Metallic Liquid-Tight Push-On Connector is constructed of UV-rated plastic for a long-lasting, outdoor life. The connector is compatible with non-metallic, liquid-tight, type B conduit. It has push-on installation.
- Use with non-metallic, type B conduit
- UV-rated plastic construction
- Indoor or outdoor use
- NEMA FB-1 and CSA- and UL Listed
- Liquid-tight connection
- Trade size: 1/2 in.
- Knockout size: 1/2 in.
Save time and money with SNAP2IT fittings. They offer the fastest, easiest installation on liquid-tight conduit. NMLT905-1 is a 1/2 in. liquid tight 90° connector.
- Put your tools away, to install the NMLT905-1 simply push on to conduit, that's it
- You'll get a super-secure, liquid-tight seal, plus the NMLT905-1 is removable and reusable
- NMLT905-1 is UL and CSA Listed
- NMLT905-1 is for non-metallic liquid-tight conduit (type B)
The PVC-encased AFC Cable Systems Liquidtite 3/4 in. x 100 ft. Flexible Steel Conduit is designed to hold power, control and communications cables in dry, wet or oily locations.Permanent circuit ground protection is provided through thecontinuous bonding strip built into the conduit core. This conduit is sunlight resistant, has a flame retardant PVC jacket and a hot dipped zinc galvanized low carbon steel core.
- Helps shield power, control and communications cables from heat, moisture, oil and sunlight
- Rugged PVC jacket allows for burial in earth or for concrete encasement
- Hot-dipped zinc, galvanized low-carbon steel core
- Permanent circuit ground protection provided through a continuous copper bonding strip
- UL- and CSA listed
This Southwire Ultratite 3/4 in. x 100 ft. Flexible PVC Conduit offers a liquid-tight design ideal for exposed or concealed installations in agricultural environments. It is also suited for direct burial and encased in concrete. This product is UL Listed and CSA certified for safety.
- Brand received (Cerrowire or Southwire) varies by zip code
- Suitable for the installation and protection of electrical conductors in circuits of 600-Volt nominal or less
- Flexible, rigid PVC construction for crush resistance
- Liquid-tight design protects against vapors, solids and the weather for use in applications requiring movement, crossover connections or tight bends
- Accommodates use in motor circuit applications as raceways for motor feeders, branch and control circuits
- Use for conductors of motor feeders, branch and control circuits
Suitable for indoor or outdoor locations to connect flexible metallic liquidtight conduit or Type B flexible non-metallic conduit to a box or enclosure. Features the split gland ring that ensures a liquidtight seal. Zinc electroplated for corrosion resistance.
- Steel and malleable iron construction provides raceway integrity
- Sealing washer provides a liquidtight seal when terminating the connector in a threadless opening
- Locknut provided
- Suitable for use in class 1, div 2, class 2, div 1 and 2, class 3, div 1 and 2 hazardous locations
The LIQUIDTITE 1/2 in. x 100 ft. Metal Conduit is made of galvanized steel and features a thermoplastic jacket to seal out liquids, gases, dirt and oil. This conduit is great for applications that require movement or tight bends. Can also be used as a grounding conductor.
- Brand received (Cerrowire or Southwire) varies by zip code
- Suitable for the installation and protection of electrical conductors in circuits of 600-Volt or less
- Ideal for use where the application requires movement, cross-over connections or tight bends
- Galvanized steel construction with a thermoplastic outer jacket to seal out liquids, gases, dirt, oil and more
- Designed for industrial and commercial applications for conveyors, blowers, cranes, air conditioners, machine tooling and lubrication equipment
- Rated for temperature range of -30 degree C to 80 degree C and 60 degree C in oil, direct burial and concrete encasement applications
Suitable for indoor or outdoor locations to connect flexible metallic liquidtight conduit or Type B flexible non-metallic conduit to a box or enclosure. Features split gland ring that ensures a liquidtight seal. Zinc electroplated for corrosion resistance.
- Steel and malleable iron construction provides raceway integrity
- Sealing washer provides a liquidtight seal when terminating the connector in a threadless opening
- Locknut provided
- Suitable for use in class 1, div 2, class 2, div 1 and 2, class 3, div 1 and 2 hazardous locations
This is a 1/2 in. Bushings (10-Pack). These are snap-in bushings made of durable PVC plastic. They are designed for knockouts of 1/2 in. trade size.
- Easy-to-use snap-in design
- Black PVC plastic construction
- For indoor use
- UL and CSA safety listed
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
Suitable for indoor or outdoor locations to connect flexible metallic liquidtight conduit or Type B flexible non-metallic conduit to a box or enclosure. Features our split-gland ring that ensures a liquidtight seal. Zinc electroplated for corrosion resistance.
- Steel and malleable iron construction provides raceway integrity
- Sealing washer provides a liquidtight seal when terminating the connector in a threadless opening
- Locknut provided
- Suitable for use in class 1, div 2, class 2, div 1 and 2, class 3, div 1 and 2 hazardous locations
The Arlington Industries 1/2 in. Weatherproof Box Holder can be used with rigid pipe to suspend electrical boxes or smoke detectors between bar joists and to position electrical enclosures above concrete slabs. This box support is simply screwed into the electrical box. Die-cast zinc construction offers superior strength and durability.
- Use with rigid pipe to suspend electrical boxes or smoke detectors between bar joists and to position electrical enclosures above concrete slabs
- Die-cast zinc construction for excellent strength and durability
- Screw directly into the electrical box
- Quick and easy to install
Liquid tight no insulated connector features a smooth ferrule that eliminates threading providing valuable labor savings. Straight conduit fitting provides superior conduit pull-out retention. A suitable product for your everyday needs.
- Convex ferrule ensures liquid tight seal
- Multiple sizes for use with PolyTuff conduit and tubing
- Suitable for indoor/outdoor use; for original equipment manufacturers or field installers
- All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease and common solvents
Connect liquid-tight conduit to an electrical enclosure, such as a weatherproof outlet box. The die-cast zinc alloy construction gives it corrosion resistance for both indoor and outdoor use. This connector meets UL and CSA requirements.
- Connects liquid tight conduit to electrical enclosures such as weatherproof outlet boxes, pool equipment motors or central air conditioning units
- High-strength, die-cast zinc alloy for corrosion resistance
- UL and CSA listed
- Reusable
- Usable indoors or outdoors
Non-Metallic straight snap2It connector for use with non-metallic liquid tight conduit type B only. They offer the fastest, easiest installation. You'll get a super-secure, liquid-tight seal. Plus, they are removable and reusable.
- 3/4 in. trade size
- Easy to install, pushes on to conduit, no tools
- Connectors are produced from UV rated plastic for long outdoor life
- UL CSA Listed
The Arlington Industries Snap-2-It 3/8 in. Connectors (5-Pack) are versatile high-quality electrical fittings designed for indoor use. These connectors are suitable for use with MC/HCF steel and aluminum cables and are fast and easy to install because there is no locknut to be loosened. The grounding tangs snap into the 1/2 in. knockout and grip the interior to form a continuous grounded path.
- Ideal for firm, dependable connections
- Die-cast zinc provides durability
- Designed for use with MC/HCF steel and aluminum cables
- Tested and Listed by UL in accordance with UL's ground-fault requirements
- Snap-2-it connectors enable quick and easy installations
The Arlington Industries 3/4 in. Snap-In Bushings (10-Pack) are designed to be used in structured wiring enclosures or electrical metal boxes to protect wires and cables. These bushings are quick and easy to install and are suitable for use with 3/4 in. knock outs. Plastic construction offers light weight and longevity.
- Suitable for use in structured wiring enclosures or electrical metal boxes to protect wires and cables
- Plastic construction provides light weight and longevity
- Designed for use with 3/4 in. knock outs
- Snap-in bushings are quick and easy to install