Searched for "39131700"
The Electrical Box Extender lends support to the contents of a wall box. This non-conductive extender helps prevent arcing by forming a barrier between the box and the metal screws on the device. This box extender has a 2-hour fire rating.
- Levels and supports wiring devices in an electrical box
- Helps prevent arcing by forming a barrier between a metal box and metal side screws on the device
- Heavy-duty, non-conductive plastic construction
- UL and CSA safety listings
- Complies with 2008 NEC Article 314.20
Save time and money with SNAP2IT fittings. They offer the fastest, easiest installation on liquid-tight conduit. NMLT905-1 is a 1/2 in. liquid tight 90° connector.
- Put your tools away, to install the NMLT905-1 simply push on to conduit, that's it
- You'll get a super-secure, liquid-tight seal, plus the NMLT905-1 is removable and reusable
- NMLT905-1 is UL and CSA Listed
- NMLT905-1 is for non-metallic liquid-tight conduit (type B)
The SCOOP - Reversible, Non-Metallic Cable Entrance Plates for Existing Cable is single gang and protects cable while having installation versatility. It is made of non-rusting, white paintable plastic. It can be used 2 ways - facing IN or OUT.
- Best way to cover existing cable
- Includes screws that match plate color
- Offers both cable protection and good looks
- Designed to install low voltage class 2 only
Snap-2-It 3/8 in. Connectors (50-Pack) are fast and easy to use. Simply push the cable into the fitting and rotate it until it is tight. To remove the cable, simply turn it counterclockwise. It installs into a 1/2 in. knockout.
- Connects metallic cable quickly and easily
- Die-cast zinc construction
- Can be used with MC/HCF steel and aluminum cable, AC/HCF steel and aluminum cable, flexible steel and aluminum conduit and MC continuous corrugated aluminum cable
- UL- and CSA safety listed
- Concrete tight when taped
- 1/2 in. KO size
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
Non-Metallic straight snap2It connector for use with non-metallic liquid tight conduit type B only. They offer the fastest, easiest installation. You'll get a super-secure, liquid-tight seal. Plus, they are removable and reusable.
- 3/4 in. trade size
- Easy to install, pushes on to conduit, no tools
- Connectors are produced from UV rated plastic for long outdoor life
- UL CSA Listed
Install cable with these 3/4 in. Plastic Push-In Button Connectors (25-Pack). They are designed to fit up to 2 cables at once and accept cables without resistance for a smooth installation. Simple to remove with a twist of a screwdriver.
- Made of plastic
- Listed for up to 2 cables
- UL and CSA listed
- Snaps into knockout with light finger pressure
- Cables insert easily for smooth installation
The LIQUIDTITE 1/2 in. x 100 ft. Metal Conduit is made of galvanized steel and features a thermoplastic jacket to seal out liquids, gases, dirt and oil. This conduit is great for applications that require movement or tight bends. Can also be used as a grounding conductor.
- Brand received (Cerrowire or Southwire) varies by zip code
- Suitable for the installation and protection of electrical conductors in circuits of 600-Volt or less
- Ideal for use where the application requires movement, cross-over connections or tight bends
- Galvanized steel construction with a thermoplastic outer jacket to seal out liquids, gases, dirt, oil and more
- Designed for industrial and commercial applications for conveyors, blowers, cranes, air conditioners, machine tooling and lubrication equipment
- Rated for temperature range of -30 degree C to 80 degree C and 60 degree C in oil, direct burial and concrete encasement applications
The Arlington Industries Snap-2-It 3/8 in. Connectors (5-Pack) are versatile high-quality electrical fittings designed for indoor use. These connectors are suitable for use with MC/HCF steel and aluminum cables and are fast and easy to install because there is no locknut to be loosened. The grounding tangs snap into the 1/2 in. knockout and grip the interior to form a continuous grounded path.
- Ideal for firm, dependable connections
- Die-cast zinc provides durability
- Designed for use with MC/HCF steel and aluminum cables
- Tested and Listed by UL in accordance with UL's ground-fault requirements
- Snap-2-it connectors enable quick and easy installations
The Southwire Company Liquidtight 3/4 in. x 100 ft. Met Electrical Cable helps protect electrical conductors up to 600-Volt. This MET conduit accommodates applications that require movement, cross-over connecting or bending. UL and CSA safety listings.
- Brand received (Cerrowire or Southwire) varies by zip code
- For use in industrial and commercial applications for conveyors, blowers, cranes, air conditioners, machine tooling and lubrication equipment
- Suitable for use as a grounding conductor
- Accommodates the installation and protection of 600-Volt or less electrical conductors in applications that require movement, cross-over connecting or bending
- Thermoplastic outer jacket helps seal out liquids, gases, oils and more
- Rated for temperature range of -22 degree F to 176 degree F (140 degree F in oil, direct burial and concrete encasement applications)
Snap2It Duplex Connectors for AC,MCI-A, HCF steel and aluminum cable. Flexible metal conduit steel and aluminum, MCI cable, continuous corrugated aluminum and AC90 may also be used. It includes an insulated throat.
- Tested and listed by UL in accordance with UL's ground fault requirements
- Zinc die-cast
- Concrete tight when taped
- CSA and cULus listed
Multi-Position Gray Nylon, Neoprene Sealing Ring Material, Flexible Non Metallic Liquid Tight Conduit 3/4 in. Polytuff. Swivellok Hubbell quality is the superior operation, reliable performance and dependable service which distinguish Hubbell products from others. A suitable product for your home improvement and everyday needs.
- Nylon compression nut has a tapered dome to tighten ferrule onto conduit
- Neoprene O-ring provides liquid tight seal
- Non integral ferrule provides conduit seal and pullout protection
- SwivelLok multi-position liquid tight fittings
The PVC-encased AFC Cable Systems Liquidtite 3/4 in. x 100 ft. Flexible Steel Conduit is designed to hold power, control and communications cables in dry, wet or oily locations.Permanent circuit ground protection is provided through thecontinuous bonding strip built into the conduit core. This conduit is sunlight resistant, has a flame retardant PVC jacket and a hot dipped zinc galvanized low carbon steel core.
- Helps shield power, control and communications cables from heat, moisture, oil and sunlight
- Rugged PVC jacket allows for burial in earth or for concrete encasement
- Hot-dipped zinc, galvanized low-carbon steel core
- Permanent circuit ground protection provided through a continuous copper bonding strip
- UL- and CSA listed
The Arlington Industries 1/2 in. Weatherproof Box Holder can be used with rigid pipe to suspend electrical boxes or smoke detectors between bar joists and to position electrical enclosures above concrete slabs. This box support is simply screwed into the electrical box. Die-cast zinc construction offers superior strength and durability.
- Use with rigid pipe to suspend electrical boxes or smoke detectors between bar joists and to position electrical enclosures above concrete slabs
- Die-cast zinc construction for excellent strength and durability
- Screw directly into the electrical box
- Quick and easy to install
90 degree Non-Metallic Connector for use with non-metallic liquid-tight conduit, type B only. Provides a smooth, gradual radius bend. Wiring is easily pulled or pushed through fitting and there are no sharp edges to strip wire.
- Produced from UV rated plastic for long outdoor life
- 1-1/2 in. trade size
- UL listed
- CSA listed
Liquid tight no insulated connector features a smooth ferrule that eliminates threading providing valuable labor savings. Straight conduit fitting provides superior conduit pull-out retention. A suitable product for your everyday needs.
- Convex ferrule ensures liquid tight seal
- Multiple sizes for use with PolyTuff conduit and tubing
- Suitable for indoor/outdoor use; for original equipment manufacturers or field installers
- All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease and common solvents
The Arlington Industries Snap-Tite 3/8 in. Duplex Saddlegrip Connector is a versatile high-quality electrical fitting that is suitable for indoor use. This connector is designed for use with aluminum and steel, AC and MC flex cables. Die-cast zinc construction provides durability, while the insulated throat offers additional safety. It installs into a 1/2 in. knockout.
- Ideal for firm, reliable connections
- Die-cast zinc provides durability
- Designed for use with aluminum and steel, AC and MC flex cables
- Insulated throat for added safety
- Snap-tite connector enables quick and easy installation
Zinc grounding bridge, provides reliable intersystem bonding between power and communication grounding systems. Comes with textured, paintable white cover. Cover is UV rated plastic for long outdoor life.
- Meets 2014 NEC ground requirements
- Has 4 termination points 1 more than required by 250.94 of the 2014 NEC
- Handles multiple hookups of communication systems
- Attaches to conductor with lay in style lug with cable range #6-#2
Saddlegrip SNAP-TITE connector used with aluminum and steel Flex, AC and AC90 cable. May also be used with MCI and MCI-A cable. It is Zinc die-cast.
- Provided with insulated throat
- Concrete tight when taped
- SNAP-TITE products have been tested and Listed by UL in accordance with UL's ground fault requirements
- Sold in package of 50
- Cable range 0.405 to 0.612
Multi-Position Gray Nylon, Neoprene Sealing Ring Material, Flexible Non Metallic Liquid Tight Conduit 3/4 in. Polytuff. Swivellok Hubbell quality is the superior operation, reliable performance and dependable service which distinguish Hubbell products from others. A suitable product for your home improvement and everyday needs.
- Nylon compression nut has a tapered dome to tighten ferrule onto conduit
- Neoprene O-ring provides liquid tight seal
- Non integral ferrule provides conduit seal and pullout protection
- SwivelLok multi-position liquid tight fittings
Suitable for indoor or outdoor locations to connect flexible metallic liquidtight conduit or Type B flexible non-metallic conduit to a box or enclosure. Features our split gland ring that ensures a liquidtight seal. Zinc electroplated for corrosion resistance.
- Steel and malleable iron construction provides raceway integrity
- Sealing washer provides a liquidtight seal when terminating the connector in a threadless opening
- Locknut provided
- Suitable for use in class 1, div 2, class 2, div 1 and 2, class 3, div 1 and 2 hazardous locations
Arlington's 1/2 in. Non-Metallic Liquid-Tight Push-On Connector is constructed of UV-rated plastic for a long-lasting, outdoor life. The connector is compatible with non-metallic, liquid-tight, type B conduit. It has push-on installation.
- Use with non-metallic, type B conduit
- UV-rated plastic construction
- Indoor or outdoor use
- NEMA FB-1 and CSA- and UL Listed
- Liquid-tight connection
- Trade size: 1/2 in.
- Knockout size: 1/2 in.
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
Connect liquid-tight conduit to an electrical enclosure, such as a weatherproof outlet box. The die-cast zinc alloy construction gives it corrosion resistance for both indoor and outdoor use. This connector meets UL and CSA requirements.
- Connects liquid tight conduit to electrical enclosures such as weatherproof outlet boxes, pool equipment motors or central air conditioning units
- High-strength, die-cast zinc alloy for corrosion resistance
- UL and CSA listed
- Reusable
- Usable indoors or outdoors