Searched for "39131700"
The 3/4 in. Female Adapter can be used indoors and outdoors. It is made with PVC and is compatible with rigid non-metallic conduit (RNC). The adapter is CSA and UL Listed to help guarantee safety.
- Compatible with RNC
- For indoor and outdoor applications
- PVC construction
- CSA and UL listed for safety
Use the 2 in. Non-Metallic Male Terminal Adapter to adapt Sch. 40 and Sch. 80 rigid non-metallic conduit to threaded fittings and metallic systems. Non-metallic PVC resists corrosion, rust, impact and damage due to exposure to sunlight. The socket end attaches to a socket fitting using solvent cement.
- Adapts non-metallic conduit to threaded fittings and metallic systems
- Non-metallic PVC is heat, fire and corrosion resistant
- Designed for use with Sch. 40 and Sch. 80 non-metallic rigid conduit
- UL and CSA listed for safety and peace of mind
- Socket fitting attaches using solvent cement
The 2 in. Type LB Nonmetallic Conduit Body has a non-threaded body. Made of rigid PVC. Conduit is non-conductive and non-corrosive. Easy application.
- Textured lids
- Foam-in-place gasket
- Compatible with RNC-type conduits
- UL and CSA listed for safety
The 1 in. Non-Metallic Standard Coupling is designed for joining non-metallic conduit. It is made with PVC and is compatible with Schedule 40 and Schedule 80 RIGID non-metallic conduit (RNC). The coupling should be attached using solvent cement and is CSA and UL listed to help ensure safety.
- Designed for joining non-metallic conduit
- Compatible with schedule 40 and schedule 80 RNC
- PVC construction
- Should be attached using solvent cement
- CSA and UL listed for safety
The 1 1/2 in. Non-Metallic Standard Coupling is designed to join Schedule 40 and Schedule 80 rigid non-metallic conduit (RNC). It is made with PVC, is CSA and UL listed to help ensure safety. This coupling should be attached using solvent cement.
- Designed to join schedule 40 and schedule 80 RNC
- Can be used indoors and outdoors
- PVC construction
- Attach using solvent cement
- CSA and UL listed for safety
Carlon PVC elbows are for use in a non-metallic PVC conduit run when directional change is necessary. Manufactured from durable PVC, the elbows are ideal for both indoor and outdoor applications. They will not rust or corrode which is especially important in outdoor applications.
- Designed for above and below-ground applications
- Use with schedule 40 rigid non-metallic conduit
- Resists rust and corrosion
- listed for use in exposed and outdoor usage
The 1/2 in. Female Adapter is designed for use with RIGID non-metallic conduit (RNC). The adapter is crafted with PVC, works indoors and outdoors and is CSA and UL Listed to help ensure safety. It has female threads on one end, socket end on the other.
- For use indoors and outdoors
- Compatible with RNC
- PVC construction
- CSA and UL Listed for safety
The 2 in. Non-Metallic Standard Coupling is crafted with PVC for durability. Suitable for indoor and outdoor use. Should be used with solvent cement. Using fittings with Non-metallic conduit insures system integrity.
- Designed to join non-metallic conduit
- PVC construction
- Works with schedule 40 and schedule 80 conduit
- CSA and UL listed for safety
- Should be attached using solvent cement
The non-conductive 3/4 in. Non-Metallic Type LB Conduit Body has a textured lid and a foam in-place gasket. Suitable for indoor and outdoor use, this conduit body hub is made of unthreaded PVC. Item is UL and CSA listed for safety.
- Compatible with rigid non-metallic conduit (RNC)
- Made of non-corrosive PVC
- Maximum operating temperature of 120 degree F
- Can be used for indoor and outdoor applications
- UL and CSA listed
- Use Without Locknut
- Protects Wire
- For Rigid Conduit
Carlon PVC Offset. For use with Schedule 40 and 80 Conduit. This fitting is 6 in. long and is Non-Metallic.
- Matches PVC conduit to surface-mounted outlet boxes
- Made of UV-resistant PVC
- Offset at each end
- Can be used in exposed or outdoor applications
- UL and CSA listed
Carlon PVC elbows are for use in a non-metallic PVC conduit run when directional change is necessary. Manufactured from durable PVC, the elbows are ideal for both indoor and outdoor applications. They will not rust or corrode which is especially important in outdoor applications.
- Designed for above and below-ground applications
- Use with schedule 40 rigid non-metallic conduit
- Resists rust and corrosion
- Listed for use in exposed and outdoor usage
The 3 in. Non-Metallic Standard Coupling is a socket for joining non-metallic electrical conduits. Made from non-metallic PVC, the socket is designed for use with RNC-type Sch. 40 and Sch. 80 conduits. The socket should be attached using solvent cement (not included). UL Listed for safety.
- Joins non-metallic electrical conduits
- Non-metallic PVC for durability
- Compatible with RNC-type schedule 40 and schedule 80 conduits
- UL listed for safety
- Should be attached using solvent cement (not included)
The E945 Series 3/4 in. Expansion Fitting is designed to compensate for length changes due to temperature variations in exposed conduit runs. It is crafted with Sch. 40 PVC for durability. The item features a 2-piece molded design and lubricated seals for easy mobility. The fitting is compatible with Sch. 40 and 80 RNC-type electrical conduits.
- Compensates for length changes due to temperature variations in exposed conduit runs
- Can be installed horizontally and vertically
- Suitable for indoor and outdoor applications
- Compatible with Sch. 40 and 80 RNC-type conduits
- CSA and UL Listed for safety
- 2 O-rings help prevent leakage
- 2-piece molded design allows for easy mobility
- Male-terminator adapter end design
The E945 Series 1 in. Expansion Fitting compensates for length changes due to temperature variations in exposed conduit runs. The non-metallic PVC fitting has a 2-piece molded design with lubricated seals for easier movement throughout the life of the fitting. 2 O-rings prevent leakage for a reliable fit. The fitting is compatible with Sch. 40 and 80 RNC-type electrical conduits.
- Compensates for length changes due to temperature variations in exposed conduit runs
- Non-metallic PVC with lubricated seals for easier movement
- Compatible with Sch. 40 and 80 RNC-type conduits
- UL listed for safety
- Male terminator adapter ends for installation
Carlon PVC elbows are for use in a non-metallic PVC conduit run when directional change is necessary. Manufactured from durable PVC, the elbows are ideal for both indoor and outdoor applications. They will not rust or corrode which is especially important in outdoor applications.
- Designed for above and below-ground applications
- Use with schedule 40 rigid non-metallic conduit
- Resists rust and corrosion
- Listed for use in exposed and outdoor usage
PVC non-metallic fittings can be used with Sch. 40 and Sch. 80 RIGID non-metallic conduit (RNC). Designed for use above ground and underground as described in the NEC. Fittings insure raceway integrity. Unlike metallic systems, non-metallic fittings are lighter, can be installed in less time and are easily fabricated on the job. Fittings are nonconductive assuring a safe system. Resistant to sunlight and Listed for exposed or outdoor usage, Non-metallic PVC fittings are durable and will not rust or corrode.
- Use with schedule 40 and 80 conduit
- UL E23018
- Material PVC
- Color gray
The 3/4 in. Flexible PVC Elbow is compatible with liquid-tight flexible non-metallic conduit (LFNC). It is made with non-corrosive PVC and neoprene for durability and can bend from 0 to 90 without losing its round shape. It features an O-ring seal for moisture-tight connections and is ETL and UL Listed to help ensure safety.
- Great for above and below-ground applications
- Resists sunlight and corrosion
- O-ring seal for moisture-tight connections
- Sunlight resistant
- ETL and UL Listed for safety
The 1-1/4 in. Type LB Non-Metallic Conduit Body is suitable for indoor and outdoor use. It is crafted with non-corrosive PVC for long-evity and is designed for use with rigid non-metallic conduit (RNC). The body features non-threaded hubs and a textured lid with a foam-in-place gasket and is CSA and UL Listed for safety.
- Made with a textured lid and foam in-place gasket
- Works well for both indoor and outdoor use
- Has a maximum operating temperature of 120 degrees F
- Non-threaded hubs
- Textured lid with foam-in-place gasket
- CSA and UL Listed to help ensure safety
Carlon PVC elbows are for use in a non-metallic PVC conduit run when directional change is necessary. Manufactured from durable PVC, the elbows are ideal for both indoor and outdoor applications. They will not rust or corrode which is especially important in outdoor applications.
- Designed for above and below-ground applications
- Use with schedule 40 rigid non-metallic conduit
- Resists rust and corrosion
- listed for use in exposed and outdoor usage
The 1-1/2 in. Non-Metallic Terminal Adapter is designed for use with Schedule 40 and Schedule 80 rigid non-metallic conduit. The adapter features male threads on 1 end and is crafted with PVC for durability. For best results, it should be attached using solvent cement.
- For adapting non-metallic conduit to threaded fittings and metallic systems
- Can be used with schedule 40 and schedule 80 rigid non-metallic conduit
- Suitable for indoor and outdoor applications
- PVC construction
- CSA and UL listed for safety
- Should be attached using solvent cement
- 1 male-threaded end and 1 socket end
The 1-1/4 in. Non-Metallic Male Terminal Adapter is a high-quality versatile fitting designed for use with Sch. 40 and Sch. 80 rigid non-metallic conduit. Non-metallic PVC resists rust, corrosion, impact and the damaging effects of sunlight. The socket end attaches to a socket fitting using solvent cement.
- For use with schedule 40 and 80 conduit
- Color in gray
- Material PVC
- UL E23018
The 3/4 in. Access Pull Elbow enables the pulling of wires through a wall to be directed in 2 separate directions. This pull elbow is compatible with rigid non-metallic conduit. Access pull point for cable in tight radius.
- Can pull wiring in two different directions quickly and easily
- Allows for conduit changes in direction
- Durable PVC construction will not rust or corrode
- Adapter is threaded
The 1 in. Non-Metallic Terminal Adapter is designed for use with Sch. 40 and Sch. 80 RIGID non-metallic conduit (RNC). It features male threads at 1 end and a socket end at the other and the adapter is made with PVC. It is CSA and UL listed to help ensure safety.
- For use with schedule 40 and 80 conduit
- Material PVC
- Color gray
- UL E23018