Searched for "39131700"
The 3/4 in. Type LB Threaded Aluminum Conduit Body is designed for gaining access to raceway interiors for wire pulling, splicing and maintenance. The conduit body is made with corrosion-resistant copper-free die-cast aluminum for strength and is suitable for use indoors and outdoors. It is CSA and UL listed to help guarantee safety.
- Designed to gain access to raceway interiors for wire pulling, splicing and maintenance
- For use with IMC and rigid conduit
- For indoor and outdoor applications
- Corrosion-resistant copper-free die-cast aluminum construction
- CSA and UL Listed for safety
The 1/2 in. Type LB Threaded Aluminum Conduit Body is designed to gain access to the interior of a raceway for wire pulling, maintenance and splicing. It can be used with rigid and IMC conduit and is made with corrosion-resistant, copper-free die-cast aluminum. The conduit body is UL and CSA listed for safety.
- Designed to gain access to raceway interiors for wire pulling, splicing, and maintenance
- For use with rigid and IMC conduit
- For indoor and outdoor applications
- Corrosion-resistant, copper-free die-cast aluminum
- UL and CSA Listed to help ensure safety
Secure rigid conduit to wood or masonry surfaces with this 1/2 in. Rigid 1-Hole Strap. It snaps onto the conduit when installed. It is usable for both indoor and outdoor applications.
- Secures rigid conduit to surfaces such as wood or masonry
- Corrosion-resistant galvanized steel
- UL Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
The 3/4 in. 2-Hole Conduit Straps (10-Pack) are designed to secure EMT conduit to wood, masonry or similar surfaces. The straps have a high load-bearing capacity and snap onto the conduit to hold it securely in place. Corrosion resistant.
- Heavy-duty conduit straps for RIGID/IMC conduit
- Made of corrosion-resistant galvanized steel
- Can be used for indoor and outdoor applications
- UL Listed
The 1/2 in. Non-Metallic Type T Conduit Body is a non-threaded body hub made of PVC. The conduit body has a textured lid and a foam in-place gasket. This fitting is compatible with rigid non-metallic conduit (RNC) and can be used for indoor and outdoor applications.
- For indoor and outdoor use
- Made of non-corrosive, non-conductive PVC
- Compatible with RNC conduit
- Maximum working temperature of 120°F
- UL and CSA listed
The 3/4 in. Threadless Compression Conduit Connectors (2-Pack) are designed to connect and effectively bond rigid conduit and intermediate metal conduit (IMC) to metal enclosures. Made of zinc-plated steel. These connectors meet UL and CSA requirements.
- Connects and positively bonds conduit to a steel outlet box or other metal enclosure
- Zinc-plated steel construction resists corrosion
- Compatible with rigid conduit and intermediate metal conduit (IMC)
- UL and CSA listed for safety
- Designed for indoor use and in concrete tight applications
The 1 in. Offset Conduit Nipple is designed to offset raceway axes by 3/4 in. It is made from corrosion-resistant die-cast zinc alloy for strength. This nipple can be used indoors and outdoors. The nipple is CSA and UL listed to help guarantee safety.
- Designed to offset raceway axes by 3/4 in.
- For indoor and outdoor applications
- For use with IMC and rigid conduit
- Corrosion-resistant die-cast zinc alloy construction
- UL and CSA Listed for safety
The 1-1/4 in. Plastic Insulated Bushing is designed to protect wires in threaded rigid or IMC conduits. It is made of heat-tolerant thermoplastic and can be used in indoor or outdoor environments. This bushing meets UL and CSA requirements.
- Protects wires in threaded rigid or IMC conduits
- Made of high-impact thermoplastic to withstand high-temperature environments
- Can be used indoors or outdoors
- UL and CSA Listed
Use this 2 in. Conduit Chase Nipple along with a rigid coupling to terminate a run of threaded conduit into an enclosure box. This zinc chase nipple is rated for both indoor and outdoor use. The Chase Nipple meets UL and CSA requirements.
- Use with a rigid coupling to terminate threaded conduit into a box
- Made of zinc
- UL and CSA listed
- Usable indoors or outdoors
- Corrosion resistant
The 2 in. Threaded Aluminum Conduit Body is designed to gain access to the interior of a raceway for wire-pulling, inspections and maintenance. It is made of die-cast aluminum and has a cover for easy access. This conduit body meets UL and CSA requirements.
- Designed for easy access to the interior of raceways
- Made of copper-free die-cast aluminum
- Use with rigid or IMC conduit
- UL and CSA Listed
- Corrosion resistant
Use these 1 in. Conduit Locknuts (2-Pack) to secure conduit to steel outlet boxes and other metal enclosures. They are designed to cut through protective coatings to ensure ground continuity. Designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Secures conduit to metal enclosures such as steel outlet boxes
- Zinc-plated steel for corrosion resistance
- Usable both inside and outside of a box
- Cuts through protective coatings on boxes and enclosures ensuring ground continuity
Choose the 3/4 in. Rigid Conduit Coupling when you need to connect segments of threaded rigid or intermediate metal conduit (IMC). You can use this galvanized steel coupling indoors or outdoors. This coupling meets UL and CSA requirements.
- Joins 2 lengths of threaded rigid or IMC conduit
- Galvanized steel resists corrosion
- UL and CSA safety listings
- For indoor or outdoor applications
The 2 in. Plastic Insulated Bushings (4-Pack) are designed to protect wires in threaded rigid or IMC conduits. They are made of heat-tolerant thermoplastic and can be used in indoor or outdoor environments. These bushings meet UL and CSA requirements.
- Protect wires in threaded rigid or IMC conduits
- Made from thermoplastic to withstand high-temperature environments
- Can be used indoors or outdoors
- UL and CSA listed
Be up to code with the 1 in. Plastic Insulating Bushings (2-Pack). These nylon bushings are compatible with threaded rigid or IMC conduit. Use them inside or outdoors.
- Protects wires in threaded rigid or IMC conduit
- High-impact thermoplastic is flame retardant to 105C
- Use required by the NEC
- UL and CSA safety listings
- For indoor or outdoor applications
This 1/2 in. Rigid Compression Coupling is designed to join and bond lengths of unthreaded rigid conduit. It is made of galvanized steel. Corrosion resistant.
- Joins and effectively bonds 2 lengths of unthreaded rigid conduit
- Galvanized steel for corrosion resistance
- UL and CSA Listed
- May be used indoors and in concrete tight applications
The 1-1/2 in. Conduit Locknut (2-Pack) secures rigid conduit and intermediate metal conduit (IMC) or various threaded fittings to steel outlet boxes or other metal enclosures. Cuts through protective coatings on enclosures for ground continuity. Exceeds UL 514B requirements.
- Secures conduit or other threaded fittings to metal enclosures
- Zinc plated steel locknut is non-corrosive
- Compatible with rigid conduit and IMC
- Designed for use inside or outside of a box on fittings or on conduit
3/4 in. 1-Hole Rigid Straps (100-Pack) secure IMC or rigid conduit on surfaces such as wood and masonry. They are made of steel and have zinc plating for corrosion resistance. The straps may be used indoors or outdoors.
- Secures IMC or rigid conduit to surfaces such as wood or masonry where greater load bearing is required
- Zinc-plated steel for corrosion resistance
- UL and CSA Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
The 1/2 in. Conduit Locknut (20-Pack) attaches rigid conduit and intermediate metal conduit (IMC) or other threaded fittings to steel outlet boxes and various metal enclosures. Cuts through protective coatings on enclosures for ground continuity. Exceeds UL 514B requirements.
- Secures conduit or other threading fittings to metal enclosures
- Zinc plated steel locknut is non-corrosive
- Compatible with rigid conduit and IMC
- Designed for use inside or outside of a box on fittings or on conduit
Where load bearing is required, use these 1/2 in. 1-Hole Conduit Straps (100-Pack) to secure IMC and rigid conduit to surfaces such as wood and masonry. They are made of steel and electro-plated with zinc for corrosion resistance. These conduit straps may be used indoor or outdoor.
- Secures IMC and rigid conduit to surfaces such as wood or masonry where greater load bearing is required
- Zinc-plated steel for corrosion resistance
- UL and CSA Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
The 1 in. Rigid Conduit Coupling is made with galvanized steel to help ensure strength. It is UL listed for safety. Designed to join and bond threaded rigid or IMC conduit together, the coupling can be used inside and outside and resists corrosion to help ensure a long working life.
- Joins and effectively bonds 2 threaded rigid or IMC conduits together
- Can be used for indoor and outdoor applications
- Galvanized steel construction
- Designed to resist corrosion for durability
- UL listed to help ensure safety
The 3/8 in. Black Button Plastic Push-in Connectors (25-Pack) are versatile high-quality electrical fittings designed for indoor use. These connectors offer a fast and easy way to install single or multiple cables and require only light finger pressure to snap into 1/2 in. knock outs. The cables insert without a struggle for a smooth installation, to remove simply use a twist of a screwdriver.
- Ideal for firm, dependable connections
- Suitable for use with a wide range of cables
- Use light finger pressure to snap into 1/2 in. knock outs suitable for use with a wide range of cables
- Quick and easy to install quick and easy to install
- Use light finger pressure to snap into 1/2 in. knock outs
- Quick and easy to install
The 1/2 in. Conduit Pull Elbow has a gasket and removable cover to facilitate wire pulling and maintenance through a sharp bend in a run of threaded rigid or IMC conduit. It is die-cast of corrosion-resistant zinc alloy. This pull elbow meets UL and CSA requirements.
- Facilitates wire pulling and maintenance in rigid or IMC conduit
- Removable cover allows easy access
- Die-cast of high-strength zinc alloy
- UL and CSA Listed
- Corrosion resistant
The 1 in. Non-Metallic Type T Conduit Body is a non-conductive fitting. This conduit body hub is not threaded and has a textured lid along with an in-place gasket. This conduit body is compatible with Rigid Non-Metallic Conduit (RNC).
- Made of non-conductive, non-corrosive PVC
- Compatible with RNC conduit
- Maximum working temperature of 120°F
- UL and CSA listed
The 1/2 in. and 3/4 in. Access Pull Elbow enables the pulling of wires through a wall to be directed in 2 separate directions. This pull elbow is compatible with rigid non-metallic conduit. Access pull point for cable in tight radius.
- Allows you to pull wires through walls in 2 different directions
- PVC construction
- Includes 2 reducer bushings for use with 1/2 in. and 3/4 in. conduit
- UL and CSA safety listings