Searched for "39131700"
The 1/2 in. Non-Metallic Type T Conduit Body is a non-threaded body hub made of PVC. The conduit body has a textured lid and a foam in-place gasket. This fitting is compatible with rigid non-metallic conduit (RNC) and can be used for indoor and outdoor applications.
- For indoor and outdoor use
- Made of non-corrosive, non-conductive PVC
- Compatible with RNC conduit
- Maximum working temperature of 120°F
- UL and CSA listed
The 3/4 in. Offset Conduit Nipple is designed to provide an offset when flexibility is needed to finish off installations using multiple boxes and enclosures. It is made of corrosion-resistant zinc alloy and designed for use with rigid or IMC conduit. This conduit nipple meets UL and CSA requirements.
- Provides flexibility in multiple-box installations
- Offsets the axis of raceways
- Corrosion-resistant, high-strength zinc alloy
- Can be installed indoors or outdoors
- UL and CSA listed
The 1/2 in. Type LB Threaded Aluminum Conduit Body is designed to gain access to the interior of a raceway for wire pulling, maintenance and splicing. It can be used with rigid and IMC conduit and is made with corrosion-resistant, copper-free die-cast aluminum. The conduit body is UL and CSA listed for safety.
- Designed to gain access to raceway interiors for wire pulling, splicing, and maintenance
- For use with rigid and IMC conduit
- For indoor and outdoor applications
- Corrosion-resistant, copper-free die-cast aluminum
- UL and CSA Listed to help ensure safety
The 2 in. Conduit Locknuts (2-Pack) are designed to secure rigid and IMC conduit or various threaded fittings to steel outlet boxes or other metal enclosures. They provide a grounded connection and are suitable for indoor applications. Designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Secure rigid and IMC conduit or threaded fittings to metal electrical enclosures
- Made of galvanized steel
- Exceed UL 514B requirements
- Cut through protective coatings on boxes to assure ground continuity
The 3/4 in. Threadless Compression Conduit Connectors (2-Pack) are designed to connect and effectively bond rigid conduit and intermediate metal conduit (IMC) to metal enclosures. Made of zinc-plated steel. These connectors meet UL and CSA requirements.
- Connects and positively bonds conduit to a steel outlet box or other metal enclosure
- Zinc-plated steel construction resists corrosion
- Compatible with rigid conduit and intermediate metal conduit (IMC)
- UL and CSA listed for safety
- Designed for indoor use and in concrete tight applications
The 1/2 in. Rigid Conduit Coupling can be used inside and outside and is crafted with galvanized steel to help ensure strength. The coupling is designed to join and bond rigid or IMC conduit together. It is UL listed for safety.
- Joins and effectively bonds 2 threaded rigid or IMC conduit runs together
- Suitable for indoor and outdoor applications
- Galvanized steel construction
- Designed to resist corrosion for durability
- UL listed for safety
The 2 in. Threadless Compression Conduit Connector is designed to connect and bond IMC and rigid conduit to steel outlet boxes and other metal enclosures. It is made with corrosion-resistant zinc-plated steel for strength and features a steel-plated compression ring that positively bonds the conduit to the connector. CSA and UL listed for safety.
- Connects and bonds IMC and rigid conduit to steel outlet boxes and other metal enclosures
- May be used indoors and in concrete-tight applications
- Corrosion-resistant zinc-plated steel construction
- Steel-plated compression ring positively bonds conduit to the connector
Use the Halex 3/4 in. Insulating Bushings (10-Pack) with locknuts to terminate threaded rigid conduits and intermediate metal conduits (IMC) to outlet boxes. The rounded surface of the bushings prevents damage to wire insulation. Insulating bushings are required by the National Electrical Code (NEC).
- Use to terminate a threaded rigid or IMC conduit to an outlet box
- Indoor or outdoor use
- Made from high-impact thermoplastic that is flame retardant to 150 degree C
- UL and CSA Listed
- Required by the NEC
Use a pair of 1 in. x 1/2 in. Rigid or IMC Conduit Reducing Washers (2-Pack) to reduce the knockout in a steel outlet box or similar enclosure. Each washer has a raised flange for positive seating. Corrosion resistant.
- Reduces the size of the knockout in a steel outlet box or other metal enclosure
- 2 washers required per knockout
- Galvanized steel is corrosion resistant
- UL and CSA listed
- Raised flanges allow for positive seating in the knockout
- For indoor or outdoor applications
The 1-1/4 in. Conduit Locknuts (2-Pack) are designed to secure rigid and IMC conduit or various threaded fittings to steel outlet boxes or other metal enclosures. The zinc-plated locknuts are corrosion resistant. They provide a grounded connection.
- Made for connecting rigid and IMC conduit or threaded fittings to steel electrical enclosures
- Cast from corrosion-resistant galvanized steel
- For indoor or outdoor use
- Exceed UL 514B requirements
- Designed to cut through protective coatings on boxes to assure ground continuity
For bonding and joining lengths of threaded rigid conduit, use this 1-1/2 in. Rigid Conduit Coupling. It is made of galvanized steel. It is resistant to corrosion. Use indoors or outdoors.
- Joins and effectively bonds 2 lengths of threaded rigid conduit
- Corrosion-resistant galvanized steel
- UL Listed
- Usable indoors and outdoors
- Secures Pipe To Box Or Panel
- Bulk
- For Rigid Conduit
The 1/2 in. Conduit Locknut (20-Pack) attaches rigid conduit and intermediate metal conduit (IMC) or other threaded fittings to steel outlet boxes and various metal enclosures. Cuts through protective coatings on enclosures for ground continuity. Exceeds UL 514B requirements.
- Secures conduit or other threading fittings to metal enclosures
- Zinc plated steel locknut is non-corrosive
- Compatible with rigid conduit and IMC
- Designed for use inside or outside of a box on fittings or on conduit
The 1-1/4 in. Rigid Conduit Locknuts (50-Pack) is ideal for securing threaded fittings to a steel outlet box. These locknuts are constructed of steel and are zinc-plated for rust resistance. They can be used indoor our outdoor.
- Secures rigid and IMC conduit to a metal enclosure
- Steel construction with zinc plating
- Compatible with galvanized rigid conduit
- Designed for indoor or outdoor use
Join lengths of threaded rigid conduit together with this Halex 1-1/4 in. Rigid Conduit Coupling. It is made of galvanized steel. It has resistance to corrosion.
- Joins and effectively bonds 2 lengths of IMC or threaded rigid conduit
- Galvanized steel for corrosion resistance
- UL Listed
- Usable indoors and outdoors
The 1 in. Non-Metallic Type T Conduit Body is a non-conductive fitting. This conduit body hub is not threaded and has a textured lid along with an in-place gasket. This conduit body is compatible with Rigid Non-Metallic Conduit (RNC).
- Made of non-conductive, non-corrosive PVC
- Compatible with RNC conduit
- Maximum working temperature of 120°F
- UL and CSA listed
The Halex 3/4 in. Rigid Conduit Locknuts (100-Pack) is ideal for securing threaded fittings to a steel outlet box. These locknuts are constructed of steel and are zinc-plated for rust resistance. They are intended for indoor or outdoor use.
- Secures rigid and IMC conduit to a metal enclosure
- Steel construction with zinc plating
- Compatible with galvanized rigid conduit
- Designed for indoor or outdoor use
This 3/4 in. 1-Hole Conduit Straps (4-Pack) are designed for high load bearing and are handy for securing rigid or IMC conduit to a variety of work surfaces. The corrosion-resistant steel snaps onto the conduit to keep it in place. These conduit straps meet UL and CSA requirements.
- Designed for securing heavy-duty rigid or IMC conduit to a variety of work surfaces
- For indoor or outdoor applications
- Made of corrosion-resistant galvanized steel
- Snaps onto the conduit to keep it in place
- UL and CSA Listed
- Installs quickly and easily
The 1 in. Rigid Conduit Coupling is made with galvanized steel to help ensure strength. It is UL listed for safety. Designed to join and bond threaded rigid or IMC conduit together, the coupling can be used inside and outside and resists corrosion to help ensure a long working life.
- Joins and effectively bonds 2 threaded rigid or IMC conduits together
- Can be used for indoor and outdoor applications
- Galvanized steel construction
- Designed to resist corrosion for durability
- UL listed to help ensure safety
The 1 in. Non-Metallic Reducer Bushing is designed to connect conduits of different sizes. UL and CSA Listed for safety, this bushing can be used with schedule 40 or schedule 80 conduit. Made of non-metallic PVC for durability.
- Use to connect 1 in. x 3/4 in. schedule 40 or schedule 80 PVC conduit
- Made of non-metallic PVC
- Compatible with schedule 40 and schedule 80 conduit
- UL and CSA listed for safety
Secure rigid conduit to wood or masonry surfaces with this 1/2 in. Rigid 1-Hole Strap. It snaps onto the conduit when installed. It is usable for both indoor and outdoor applications.
- Secures rigid conduit to surfaces such as wood or masonry
- Corrosion-resistant galvanized steel
- UL Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
Change rigid or IMC conduit direction with the 3/4 in. 90 degree Rigid Elbow. This galvanized steel elbow features a large radius to allow easy wire pulling. Usable indoors or outdoors.
- Enables a 90 degree directional turn in a run of rigid conduit
- Made of galvanized steel for corrosion resistance
- UL and CSA Listed
- Large radius for easy wire pulling
The 2 in. Insulated Metallic Grounding Bushing provides a means of grounding threaded rigid conduit or intermediate metal conduit (IMC). The zinc alloy bushing with thermoplastic liner is non-corrosive. It is suitable for use indoors only.
- Grounds threaded conduit
- Zinc alloy is high strength and non-corrosive
- Thermoplastic liner is rated at 150 degree C
- Compatible with rigid conduit or IMC
- Designed for indoor use
- UL and CSA listed for safety and peace of mind
- Lug provided for bonding jumper to a neutral bus bar
- Locknut (sold separately) use required
Use this 1 in. Chase Conduit Nipple to connect threaded conduit to an enclosure knockout. With a locknut (not included), this fitting can be used as a short raceway between boxes or enclosures. This conduit nipple meets UL and CSA requirements.
- Connects threaded conduit to a metal enclosure knockout
- Use with a locknut (not included) as a raceway between two enclosures
- Made of high-strength, corrosion-resistant zinc alloy
- UL and CSA listings
- Usable indoors or outdoors
Use these 1 in. Conduit Locknuts (2-Pack) to secure conduit to steel outlet boxes and other metal enclosures. They are designed to cut through protective coatings to ensure ground continuity. Designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Secures conduit to metal enclosures such as steel outlet boxes
- Zinc-plated steel for corrosion resistance
- Usable both inside and outside of a box
- Cuts through protective coatings on boxes and enclosures ensuring ground continuity
The 2-1/2 in. Insulated Plastic Bushing is designed to protect wires in threaded rigid or IMC conduits. It is made of heat-tolerant thermoplastic. It can be used in indoor or outdoor environments.
- Protects wires in threaded rigid or IMC conduits
- Made from thermoplastic to withstand high-temperature environments
- Can be used indoors or outdoors
- UL and CSA listed
The 1 in. Thread less Compression Conduit Connector is designed to connect and effectively bond rigid or IMC conduit to a steel outlet box or other metal enclosure. It is made of corrosion-resistant galvanized steel. This connector meets UL and CSA requirements.
- Connects and bonds rigid or IMC cable to metal enclosures
- Made of corrosion-resistant galvanized steel
- Can be used in concrete-tight applications
- UL and CSA Listed
Use the 1 in. Rigid or IMC Conduit 1-Hole Strap when extra load bearing is needed to attach conduit to wood, masonry or a like surface. This zinc-plated strap snaps in place. Positively snaps onto the conduit.
- Secures rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL Listed
- For indoor or outdoor applications
The 3/4 in. Non-Metallic Reducer Bushing is compatible with both Sch. 40 and Sch. 80 conduit. Made of durable PVC, this 3/4 in. x 1/2 in. non-metallic bushing connects conduits of different sizes. Item is UL and CSA listed for safety.
- Reducer bushings and plugs
- Material PVC
- Color gray
- UL E23018
The 1-1/2 in. Insulated Grounding Bushings (2-Pack) are designed to insulate and ground threaded rigid or IMC conduit. They are made of zinc alloy with a thermoplastic, heat-tolerant liner. A lug is provided for bonding the jumper to a neutral bus bar.
- Insulate and ground threaded rigid or IMC conduit
- Made of zinc alloy with a thermoplastic liner
- UL and CSA listed
- Lug included for connecting the jumper to a neutral bus bar
- For indoor use only
Featured product is a rigid one hole strap. It is used to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. It can be used indoors or outdoors.
- Indoors or outdoors
- Steel, zinc electro plate
- 1 in.
- UL
The 1-1/4 in. Non-Metallic Reducer Bushing easily connects conduits of different sizes. Made of non-metallic PVC for durability. This bushing can be used with both Sch. 40 and Sch. 80 conduit.
- Connects conduits of different sizes
- Made of non-metallic PVC
- Compatible with sch. 40 and sch. 80 conduit
- UL and CSA listed
The 1-1/4 in. Chase Conduit Nipple is designed for use with a rigid coupling to terminate threaded conduit to metal electrical boxes. Used with a locknut, it can provide a short raceway between boxes. This chase nipple meets UL and CSA requirements.
- Terminates threaded conduit to metal electrical boxes
- Can be used with a locknut to create a short raceway between boxes
- Corrosion-resistant, high-strength zinc alloy
- UL and CSA listed
- Can be installed indoors or outdoors
The 2 in. Rigid Conduit Coupling is crafted with galvanized steel to help ensure strength. Designed to join and bond threaded rigid or IMC conduit, the coupling can be used inside and outside. UL listed for safety.
- Joins and effectively bonds 2 threaded rigid or IMC conduits together
- Suitable for indoor and outdoor applications
- Galvanized steel construction
- Designed to resist corrosion for durability
- UL listed to help ensure safety
The 3/4 in. ENT Snap-on Male Adapter snaps onto electrical non-metallic tubing (ENT) and into a knockout box. Designed for use to connect electrical non-metallic tubing (ENT) and ENT quick set cement, the adapters are suitable for damp locations. The 1-piece quick connect design make installation of this adapter quick, easy and safe.
- 3/4 in. ENT male adapter for connecting Electrical Non-Metallic Tubing (ENT)
- Adapter is compatible with ENT when used with ENT cement
- Durable PVC construction is non-corrosive, non-conductive and suitable for damp locations
- Snap-in adapters on both ends for quick and easy installation
- UL listed
- Suitable for damp locations
The 1-1/2 in. Offset Conduit Nipple is designed to provide an offset when flexibility is needed to finish off installations using multiple boxes and enclosures. It is made of corrosion-resistant zinc alloy and designed for use with rigid or IMC conduit. This conduit nipple meets UL and CSA requirements.
- Provides flexibility in multiple-box installations
- Offsets the axis of raceways
- Corrosion-resistant, high-strength zinc alloy
- Can be installed indoors or outdoors
- UL and CSA listed
- Use To Cover Exposed Holes In Steel Outlet Boxes and Other Metal Enclosures
- Indoor Use Only
- 10 Per Bag
To join 2 sections of rigid or intermediate metal conduit (IMC), employ the 3/4 in. Compression Coupling. It is for indoor and concrete-tight installation. It resists corrosion.
- Connects 2 lengths of threadless rigid or IMC conduit
- Zinc-plated steel for corrosion resistance
- UL and CSA safety listings
- For indoor and concrete-tight applications
- Steel-plated compression ring positively bonds conduit to the connector
The 3/4 in. Type LB Threaded Aluminum Conduit Body is designed for gaining access to raceway interiors for wire pulling, splicing and maintenance. The conduit body is made with corrosion-resistant copper-free die-cast aluminum for strength and is suitable for use indoors and outdoors. It is CSA and UL listed to help guarantee safety.
- Designed to gain access to raceway interiors for wire pulling, splicing and maintenance
- For use with IMC and rigid conduit
- For indoor and outdoor applications
- Corrosion-resistant copper-free die-cast aluminum construction
- CSA and UL Listed for safety
The Halex 1/2 in. Rigid Conduit Locknuts (200-Pack) is ideal for securing threaded fittings to a steel outlet box. These locknuts are constructed of steel and are zinc-plated for rust resistance. The locknuts can be used indoor or outdoor.
- Secures rigid and IMC conduit to a metal enclosure
- Steel construction with zinc plating
- Compatible with galvanized rigid conduit
- Designed for indoor or outdoor use
Safely ground a run of conduit with 3/4 in. Insulated Rigid or IMC Grounding Bushings (2-Pack). These zinc alloy bushings feature a thermoplastic liner.
- Grounds rigid or IMC conduit
- Die-cast of high-strength zinc alloy
- UL and CSA Listed
- Thermoplastic liner rated at 150 degree F
- For indoor applications only
The 1 in. Rigid or IMC Conduit 2-Hole Strap helps with the installation of conduit on wood, masonry or a like surface when extra load bearing is needed. It positively snaps onto the conduit. For indoor or outdoor applications.
- Secures rigid or IMC conduit to wood, masonry or a similar surface where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL Listed
- Positively snaps on the conduit when installed
The 1-1/2 in. Conduit Locknut (2-Pack) secures rigid conduit and intermediate metal conduit (IMC) or various threaded fittings to steel outlet boxes or other metal enclosures. Cuts through protective coatings on enclosures for ground continuity. Exceeds UL 514B requirements.
- Secures conduit or other threaded fittings to metal enclosures
- Zinc plated steel locknut is non-corrosive
- Compatible with rigid conduit and IMC
- Designed for use inside or outside of a box on fittings or on conduit
The 1/2 in. Conduit Pull Elbow has a gasket and removable cover to facilitate wire pulling and maintenance through a sharp bend in a run of threaded rigid or IMC conduit. It is die-cast of corrosion-resistant zinc alloy. This pull elbow meets UL and CSA requirements.
- Facilitates wire pulling and maintenance in rigid or IMC conduit
- Removable cover allows easy access
- Die-cast of high-strength zinc alloy
- UL and CSA Listed
- Corrosion resistant
The 3/4 in. Non-Metallic Type T Conduit Body has a textured lid and a foam in-place gasket. Made of PVC, this conduit body hub is non-threaded and is for use with rigid non-metallic conduit (RNC). Made for indoor and outdoor applications.
- For indoor and outdoor applications
- Made of non-conductive, non-corrosive PVC
- Compatible with RNC conduit
- Maximum operating temperature of 120°F
- UL and CSA listed
The 3/4 in. Rigid Chase Conduit Nipple, used with a rigid coupling, connects conduit to a hole in a metal box or enclosure. This zinc alloy nipple also provides a short raceway between boxes or enclosures when used with a locknut. This conduit nipple meets UL and CSA requirements.
- Used with a rigid coupling to terminate threaded conduit to a hole in a metal box or enclosure
- Use with a locknut to provide a short raceway between boxes or enclosures
- Die-cast high-strength zinc alloy
- UL and CSA Listed
- For indoor or outdoor applications
The 1-1/2 in. Compression Conduit Coupling is designed to join and bond 2 lengths of threadless IMC or rigid conduit. The coupling is crafted with galvanized steel for strength and is plated with steel for durability. It can be used indoors and in concrete-tight applications.
- Designed to join and bond threadless IMC or rigid conduit
- Use indoors and in concrete-tight applications
- Corrosion-resistant zinc-plated steel construction
- Steel-plated compression ring positively bonds conduit to the connector
- UL and CSA Listed for safety
The 1/2 in. 2-Hole Conduit Straps (10-Pack) are designed to secure rigid or IMC conduit to wood, masonry or similar surfaces. The straps have a high load-bearing capacity and snap onto a conduit to hold it securely in place. Positively snaps on a conduit when installed.
- Heavy-duty conduit straps for securing rigid or IMC conduit
- Made of corrosion-resistant galvanized steel
- Can be used for indoor and outdoor applications
- UL Listed