Searched for "39131700"
The 2 in. Conduit Locknuts (2-Pack) are designed to secure rigid and IMC conduit or various threaded fittings to steel outlet boxes or other metal enclosures. They provide a grounded connection and are suitable for indoor applications. Designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Secure rigid and IMC conduit or threaded fittings to metal electrical enclosures
- Made of galvanized steel
- Exceed UL 514B requirements
- Cut through protective coatings on boxes to assure ground continuity
The 1-1/4 in. Conduit Locknuts (2-Pack) are designed to secure rigid and IMC conduit or various threaded fittings to steel outlet boxes or other metal enclosures. The zinc-plated locknuts are corrosion resistant. They provide a grounded connection.
- Made for connecting rigid and IMC conduit or threaded fittings to steel electrical enclosures
- Cast from corrosion-resistant galvanized steel
- For indoor or outdoor use
- Exceed UL 514B requirements
- Designed to cut through protective coatings on boxes to assure ground continuity
The 1-1/4 in. Plastic Insulated Bushing is designed to protect wires in threaded rigid or IMC conduits. It is made of heat-tolerant thermoplastic and can be used in indoor or outdoor environments. This bushing meets UL and CSA requirements.
- Protects wires in threaded rigid or IMC conduits
- Made of high-impact thermoplastic to withstand high-temperature environments
- Can be used indoors or outdoors
- UL and CSA Listed
The 3/4 in. Rigid or IMC Conduit Pull Elbow, with its removable cover, aids in wire pulling through a sharp bend. This elbow is made of die-cast, high-strength zinc alloy. This pull elbow meets UL and CSA requirements.
- Facilitates wire pulling through a sharp bend in a run of threaded rigid or IMC conduit
- Die-cast of high-strength zinc alloy for corrosion resistance
- UL and CSA Listed
- For indoor or outdoor applications
- Removable cover provides easy access to wiring
- Includes gasket
Use the 1 in. Rigid or IMC Conduit 1-Hole Strap when extra load bearing is needed to attach conduit to wood, masonry or a like surface. This zinc-plated strap snaps in place. Positively snaps onto the conduit.
- Secures rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL Listed
- For indoor or outdoor applications
- Use To Cover Exposed Holes In Steel Outlet Boxes and Other Metal Enclosures
- Indoor Use Only
- 10 Per Bag
The 3/4 in. Offset Conduit Nipple is designed to provide an offset when flexibility is needed to finish off installations using multiple boxes and enclosures. It is made of corrosion-resistant zinc alloy and designed for use with rigid or IMC conduit. This conduit nipple meets UL and CSA requirements.
- Provides flexibility in multiple-box installations
- Offsets the axis of raceways
- Corrosion-resistant, high-strength zinc alloy
- Can be installed indoors or outdoors
- UL and CSA listed
- Use To Cover Exposed Holes In Steel Outlet Boxes and Other Metal Enclosures
- Indoor Use Only
- 10 Per Bag
The 1/2 in. Conduit Locknut (20-Pack) attaches rigid conduit and intermediate metal conduit (IMC) or other threaded fittings to steel outlet boxes and various metal enclosures. Cuts through protective coatings on enclosures for ground continuity. Exceeds UL 514B requirements.
- Secures conduit or other threading fittings to metal enclosures
- Zinc plated steel locknut is non-corrosive
- Compatible with rigid conduit and IMC
- Designed for use inside or outside of a box on fittings or on conduit
The 3/4 in. x 1/2 in. Reducer Bushing is intended to reduce the entry size of a run of threaded conduit. The bushing is CSA- and UL listed for use with Rigid or intermediate metal conduit (IMC). Used for indoor applications.
- Use to reduce the entry size of a run of threaded conduit
- Die-cast-zinc alloy is high strength
- Corrosion resistant
- Compatible with rigid conduit and IMC
- For indoor use
- CSA- and UL Listed
3/4 in. 1-Hole Rigid Straps (100-Pack) secure IMC or rigid conduit on surfaces such as wood and masonry. They are made of steel and have zinc plating for corrosion resistance. The straps may be used indoors or outdoors.
- Secures IMC or rigid conduit to surfaces such as wood or masonry where greater load bearing is required
- Zinc-plated steel for corrosion resistance
- UL and CSA Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
- Size 0 Fits 14/2,14/3,12/2, Ac and Mc
The 2 in. 2-Hole Conduit Straps (2-Pack) are designed to secure conduit to wood, masonry or similar surfaces where greater load bearing is required. The corrosion-resistant straps are constructed of galvanized steel with a zinc-plated finish. Straps positively snap on conduit when installed.
- Use to secure conduit to wood, masonry or similar surfaces where greater load bearing is required
- Galvanized-steel construction
- Zinc-plated finish
- Corrosion resistant
- Compatible with galvanized-rigid conduit (GRC) and intermediate metal conduit (IMC)
- CSA and UL Listed
The 3/8 in. Black Button Plastic Push-in Connectors (25-Pack) are versatile high-quality electrical fittings designed for indoor use. These connectors offer a fast and easy way to install single or multiple cables and require only light finger pressure to snap into 1/2 in. knock outs. The cables insert without a struggle for a smooth installation, to remove simply use a twist of a screwdriver.
- Ideal for firm, dependable connections
- Suitable for use with a wide range of cables
- Use light finger pressure to snap into 1/2 in. knock outs suitable for use with a wide range of cables
- Quick and easy to install quick and easy to install
- Use light finger pressure to snap into 1/2 in. knock outs
- Quick and easy to install
Secure rigid conduit to wood or masonry surfaces with this 1/2 in. Rigid 1-Hole Strap. It snaps onto the conduit when installed. It is usable for both indoor and outdoor applications.
- Secures rigid conduit to surfaces such as wood or masonry
- Corrosion-resistant galvanized steel
- UL Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
Use this 2-1/2 in. Conduit Locknut to help install a length of rigid or IMC conduit on a steel outlet box or other metal enclosure. It cuts through the protective coating to preserve ground continuity. Use Indoor or outdoor.
- Secures a rigid or IMC conduit or threaded fitting to a steel outlet box or other metal enclosure
- Cuts through the protective coating on a box or enclosure to assure ground continuity
- Zinc-plated steel resists corrosion
- For indoor or outdoor application
- Exceeds UL 514B requirements
The 2 in. Insulated Metallic Grounding Bushing provides a means of grounding threaded rigid conduit or intermediate metal conduit (IMC). The zinc alloy bushing with thermoplastic liner is non-corrosive. It is suitable for use indoors only.
- Grounds threaded conduit
- Zinc alloy is high strength and non-corrosive
- Thermoplastic liner is rated at 150 degree C
- Compatible with rigid conduit or IMC
- Designed for indoor use
- UL and CSA listed for safety and peace of mind
- Lug provided for bonding jumper to a neutral bus bar
- Locknut (sold separately) use required
Where load bearing is required, use these 1/2 in. 1-Hole Conduit Straps (100-Pack) to secure IMC and rigid conduit to surfaces such as wood and masonry. They are made of steel and electro-plated with zinc for corrosion resistance. These conduit straps may be used indoor or outdoor.
- Secures IMC and rigid conduit to surfaces such as wood or masonry where greater load bearing is required
- Zinc-plated steel for corrosion resistance
- UL and CSA Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
Use this 2 in. Conduit Chase Nipple along with a rigid coupling to terminate a run of threaded conduit into an enclosure box. This zinc chase nipple is rated for both indoor and outdoor use. The Chase Nipple meets UL and CSA requirements.
- Use with a rigid coupling to terminate threaded conduit into a box
- Made of zinc
- UL and CSA listed
- Usable indoors or outdoors
- Corrosion resistant
The 1/2 in. Service Entrance Ell features a cover and gasket and is designed to gain access to the interior of a raceway for wire pulling, inspections and maintenance. This ell is a flush-mounted fitting. The Service Entrance Ell meets UL and CSA requirements.
- Designed to gain access to raceways
- Made of copper-free die-cast aluminum
- Compatible with rigid and IMC conduit
- Corrosion-resistant design
- UL and CSA listed
The 1-1/2 in. Offset Conduit Nipple is designed to provide an offset when flexibility is needed to finish off installations using multiple boxes and enclosures. It is made of corrosion-resistant zinc alloy and designed for use with rigid or IMC conduit. This conduit nipple meets UL and CSA requirements.
- Provides flexibility in multiple-box installations
- Offsets the axis of raceways
- Corrosion-resistant, high-strength zinc alloy
- Can be installed indoors or outdoors
- UL and CSA listed
The 1-1/4 in. Chase Conduit Nipple is designed for use with a rigid coupling to terminate threaded conduit to metal electrical boxes. Used with a locknut, it can provide a short raceway between boxes. This chase nipple meets UL and CSA requirements.
- Terminates threaded conduit to metal electrical boxes
- Can be used with a locknut to create a short raceway between boxes
- Corrosion-resistant, high-strength zinc alloy
- UL and CSA listed
- Can be installed indoors or outdoors
Be up to code with the 1 in. Plastic Insulating Bushings (2-Pack). These nylon bushings are compatible with threaded rigid or IMC conduit. Use them inside or outdoors.
- Protects wires in threaded rigid or IMC conduit
- High-impact thermoplastic is flame retardant to 105C
- Use required by the NEC
- UL and CSA safety listings
- For indoor or outdoor applications
These 3/4 in. x 1/2 in. Conduit Reducing Washers (4-Pack) reduce the size of knockouts in metal enclosures such as steel outlet boxes. They feature raised flanges which enable positive seating in the knockouts. Requires 2 washers per knockout.
- Reduces the size of the knockout in a steel outlet box or other metal enclosure
- Galvanized steel resists corrosion
- Raised flanges allow for positive seating in the knockout
- Trade sizes marked on each washer
- UL listed
- Usable indoors or outdoors