Searched for "39131700"
The 1-1/4 in. Plastic Insulated Bushing is designed to protect wires in threaded rigid or IMC conduits. It is made of heat-tolerant thermoplastic and can be used in indoor or outdoor environments. This bushing meets UL and CSA requirements.
- Protects wires in threaded rigid or IMC conduits
- Made of high-impact thermoplastic to withstand high-temperature environments
- Can be used indoors or outdoors
- UL and CSA Listed
Safely ground a run of conduit with 3/4 in. Insulated Rigid or IMC Grounding Bushings (2-Pack). These zinc alloy bushings feature a thermoplastic liner.
- Grounds rigid or IMC conduit
- Die-cast of high-strength zinc alloy
- UL and CSA Listed
- Thermoplastic liner rated at 150 degree F
- For indoor applications only
Secure rigid conduit to wood or masonry surfaces with this 1/2 in. Rigid 1-Hole Strap. It snaps onto the conduit when installed. It is usable for both indoor and outdoor applications.
- Secures rigid conduit to surfaces such as wood or masonry
- Corrosion-resistant galvanized steel
- UL Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
The 2-1/2 in. Insulated Plastic Bushing is designed to protect wires in threaded rigid or IMC conduits. It is made of heat-tolerant thermoplastic. It can be used in indoor or outdoor environments.
- Protects wires in threaded rigid or IMC conduits
- Made from thermoplastic to withstand high-temperature environments
- Can be used indoors or outdoors
- UL and CSA listed
The 2 in. Conduit Locknuts (2-Pack) are designed to secure rigid and IMC conduit or various threaded fittings to steel outlet boxes or other metal enclosures. They provide a grounded connection and are suitable for indoor applications. Designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Secure rigid and IMC conduit or threaded fittings to metal electrical enclosures
- Made of galvanized steel
- Exceed UL 514B requirements
- Cut through protective coatings on boxes to assure ground continuity
Where load bearing is required, use these 1/2 in. 1-Hole Conduit Straps (100-Pack) to secure IMC and rigid conduit to surfaces such as wood and masonry. They are made of steel and electro-plated with zinc for corrosion resistance. These conduit straps may be used indoor or outdoor.
- Secures IMC and rigid conduit to surfaces such as wood or masonry where greater load bearing is required
- Zinc-plated steel for corrosion resistance
- UL and CSA Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
3/4 in. 1-Hole Rigid Straps (100-Pack) secure IMC or rigid conduit on surfaces such as wood and masonry. They are made of steel and have zinc plating for corrosion resistance. The straps may be used indoors or outdoors.
- Secures IMC or rigid conduit to surfaces such as wood or masonry where greater load bearing is required
- Zinc-plated steel for corrosion resistance
- UL and CSA Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
The 2 in. 90 degree Conduit Elbow is intended for use to make a 90 degree directional change when installing rigid or intermediate metal conduit (IMC) in indoor or outdoor applications. Large radius for easy wire pulling. CSA- and UL Listed.
- Use to make a 90 degree directional change when installing rigid or IMC conduit
- Galvanized-steel construction
- Corrosion resistant
- For indoor or outdoor use
Use this 2 in. Conduit Chase Nipple along with a rigid coupling to terminate a run of threaded conduit into an enclosure box. This zinc chase nipple is rated for both indoor and outdoor use. The Chase Nipple meets UL and CSA requirements.
- Use with a rigid coupling to terminate threaded conduit into a box
- Made of zinc
- UL and CSA listed
- Usable indoors or outdoors
- Corrosion resistant
Use this 2-1/2 in. Conduit Locknut to help install a length of rigid or IMC conduit on a steel outlet box or other metal enclosure. It cuts through the protective coating to preserve ground continuity. Use Indoor or outdoor.
- Secures a rigid or IMC conduit or threaded fitting to a steel outlet box or other metal enclosure
- Cuts through the protective coating on a box or enclosure to assure ground continuity
- Zinc-plated steel resists corrosion
- For indoor or outdoor application
- Exceeds UL 514B requirements
The 1-1/2 in. Conduit Locknut (2-Pack) secures rigid conduit and intermediate metal conduit (IMC) or various threaded fittings to steel outlet boxes or other metal enclosures. Cuts through protective coatings on enclosures for ground continuity. Exceeds UL 514B requirements.
- Secures conduit or other threaded fittings to metal enclosures
- Zinc plated steel locknut is non-corrosive
- Compatible with rigid conduit and IMC
- Designed for use inside or outside of a box on fittings or on conduit
These 3/4 in. x 1/2 in. Conduit Reducing Washers (4-Pack) reduce the size of knockouts in metal enclosures such as steel outlet boxes. They feature raised flanges which enable positive seating in the knockouts. Requires 2 washers per knockout.
- Reduces the size of the knockout in a steel outlet box or other metal enclosure
- Galvanized steel resists corrosion
- Raised flanges allow for positive seating in the knockout
- Trade sizes marked on each washer
- UL listed
- Usable indoors or outdoors
The 2 in. 2-Hole Conduit Straps (2-Pack) are designed to secure conduit to wood, masonry or similar surfaces where greater load bearing is required. The corrosion-resistant straps are constructed of galvanized steel with a zinc-plated finish. Straps positively snap on conduit when installed.
- Use to secure conduit to wood, masonry or similar surfaces where greater load bearing is required
- Galvanized-steel construction
- Zinc-plated finish
- Corrosion resistant
- Compatible with galvanized-rigid conduit (GRC) and intermediate metal conduit (IMC)
- CSA and UL Listed
The 3/4 in. Threadless Compression Conduit Connectors (2-Pack) are designed to connect and effectively bond rigid conduit and intermediate metal conduit (IMC) to metal enclosures. Made of zinc-plated steel. These connectors meet UL and CSA requirements.
- Connects and positively bonds conduit to a steel outlet box or other metal enclosure
- Zinc-plated steel construction resists corrosion
- Compatible with rigid conduit and intermediate metal conduit (IMC)
- UL and CSA listed for safety
- Designed for indoor use and in concrete tight applications
The 1-1/4 in. Compression Conduit Connector is designed to connect and effectively bond rigid or IMC conduit to a steel outlet box or other metal enclosure. It is made of galvanized steel. It is suitable for indoor and concrete-tight applications.
- Connects rigid or IMC conduit to metal electrical enclosures
- Made of corrosion-resistant galvanized steel
- UL and CSA Listed
- Steel-plated compression ring positively bonds conduit to the connector
- Corrosion resistant
The 2 in. Insulated Metallic Grounding Bushing provides a means of grounding threaded rigid conduit or intermediate metal conduit (IMC). The zinc alloy bushing with thermoplastic liner is non-corrosive. It is suitable for use indoors only.
- Grounds threaded conduit
- Zinc alloy is high strength and non-corrosive
- Thermoplastic liner is rated at 150 degree C
- Compatible with rigid conduit or IMC
- Designed for indoor use
- UL and CSA listed for safety and peace of mind
- Lug provided for bonding jumper to a neutral bus bar
- Locknut (sold separately) use required
Use the Halex 3/4 in. Insulating Bushings (10-Pack) with locknuts to terminate threaded rigid conduits and intermediate metal conduits (IMC) to outlet boxes. The rounded surface of the bushings prevents damage to wire insulation. Insulating bushings are required by the National Electrical Code (NEC).
- Use to terminate a threaded rigid or IMC conduit to an outlet box
- Indoor or outdoor use
- Made from high-impact thermoplastic that is flame retardant to 150 degree C
- UL and CSA Listed
- Required by the NEC
The 3/4 in. Rigid Chase Conduit Nipple, used with a rigid coupling, connects conduit to a hole in a metal box or enclosure. This zinc alloy nipple also provides a short raceway between boxes or enclosures when used with a locknut. This conduit nipple meets UL and CSA requirements.
- Used with a rigid coupling to terminate threaded conduit to a hole in a metal box or enclosure
- Use with a locknut to provide a short raceway between boxes or enclosures
- Die-cast high-strength zinc alloy
- UL and CSA Listed
- For indoor or outdoor applications
The 1-1/4 in. Threaded Conduit Body is designed to gain access to the interior of a raceway for wire pulling, inspections and maintenance. The elbow has a cover and gasket for easy access. It is suitable for rigid or IMC cable.
- Designed for easy access to the interior of raceways
- Made of copper-free die-cast aluminum
- Use with rigid or IMC conduit
- UL and CSA listed
- Corrosion resistant
The 1/2 in. Type LB Threaded Aluminum Conduit Body is designed to gain access to the interior of a raceway for wire pulling, maintenance and splicing. It can be used with rigid and IMC conduit and is made with corrosion-resistant, copper-free die-cast aluminum. The conduit body is UL and CSA listed for safety.
- Designed to gain access to raceway interiors for wire pulling, splicing, and maintenance
- For use with rigid and IMC conduit
- For indoor and outdoor applications
- Corrosion-resistant, copper-free die-cast aluminum
- UL and CSA Listed to help ensure safety
The 3/4 in. Non-Metallic Reducer Bushing is compatible with both Sch. 40 and Sch. 80 conduit. Made of durable PVC, this 3/4 in. x 1/2 in. non-metallic bushing connects conduits of different sizes. Item is UL and CSA listed for safety.
- Reducer bushings and plugs
- Material PVC
- Color gray
- UL E23018
The 2 in. Rigid Conduit Locknuts (50-Pack) is ideal for securing threaded fittings to a steel outlet box. These locknuts are constructed of steel and are zinc-plated for rust resistance. Use indoor or outdoor.
- Secures rigid and IMC conduit to a metal enclosure
- Steel construction with zinc plating
- Compatible with galvanized rigid conduit
- Designed for indoor or outdoor use
The 2 in. Threadless Compression Conduit Connector is designed to connect and bond IMC and rigid conduit to steel outlet boxes and other metal enclosures. It is made with corrosion-resistant zinc-plated steel for strength and features a steel-plated compression ring that positively bonds the conduit to the connector. CSA and UL listed for safety.
- Connects and bonds IMC and rigid conduit to steel outlet boxes and other metal enclosures
- May be used indoors and in concrete-tight applications
- Corrosion-resistant zinc-plated steel construction
- Steel-plated compression ring positively bonds conduit to the connector
The 1 in. Threaded Aluminum Conduit Body is designed to gain easy access to the interior of a raceway for wire-pulling, inspections and maintenance. It is made of die-cast aluminum and has a handy removable cover. This conduit body meets UL and CSA requirements.
- Designed for easy access to the interior of raceways
- Made of copper-free die-cast aluminum
- Use with rigid or IMC conduit
- UL and CSA Listed
- Can be used in interior or exterior applications
Change rigid or IMC conduit direction with the 3/4 in. 90 degree Rigid Elbow. This galvanized steel elbow features a large radius to allow easy wire pulling. Usable indoors or outdoors.
- Enables a 90 degree directional turn in a run of rigid conduit
- Made of galvanized steel for corrosion resistance
- UL and CSA Listed
- Large radius for easy wire pulling
The 1/2 in. ENT Snap-on Male Adapter snaps onto electrical non-metallic tubing (ENT) and into a knockout box. Designed for use to connect electrical non-metallic tubing (ENT) and ENT quick set cement, the adapters are suitable for damp locations. The one piece quick connect design make installation of this adapter quick, easy and safe.
- 1/2 in. ENT adapter for connecting Electrical Non-Metallic Tubing (ENT)
- Adapter is compatible with ENT when used with ENT cement
- Durable PVC construction is non-corrosive, non-conductive and suitable for damp locations
- Snap-in adapters on both ends for quick and easy installation
- UL listed
The 1 in. Insulated Grounding Bushings (2-Pack) are designed to ground the wires in threaded rigid or IMC conduits. The bushings are made of heat-tolerant thermoplastic and can be used in indoor or outdoor environments.
- Insulate wires in threaded rigid or IMC conduits
- Made from thermoplastic to withstand high-temperature environments
- Can be used indoors only
- UL and CSA listed
The 1-1/2 in. Chase Conduit Nipple is a connector made of non-corrosive zinc alloy and suitable for indoor or outdoor use. With rigid coupling (sold separately) the connector terminates threaded conduit to factory or fields punched, cut or drilled holes in metal boxes. With a locknut (sold separately) the connector provides a short raceway between boxes.
- Use with rigid coupling to terminate threaded conduit to factory or field holes in metal enclosure
- Use with a locknut to provide a raceway between enclosures
- Zinc alloy is high strength and non-corrosive
- Designed for indoor or outdoor use
- UL and CSA listed for safety and peace of mind
The 1-1/4 in. Rigid Conduit Locknuts (50-Pack) is ideal for securing threaded fittings to a steel outlet box. These locknuts are constructed of steel and are zinc-plated for rust resistance. They can be used indoor our outdoor.
- Secures rigid and IMC conduit to a metal enclosure
- Steel construction with zinc plating
- Compatible with galvanized rigid conduit
- Designed for indoor or outdoor use
- Zinc Alloy
- 3/8" Greenfield (Flex)
- 14/2,12/3 Bx
The 2 in. Threaded Aluminum Conduit Body is designed to gain access to the interior of a raceway for wire-pulling, inspections and maintenance. It is made of die-cast aluminum and has a cover for easy access. This conduit body meets UL and CSA requirements.
- Designed for easy access to the interior of raceways
- Made of copper-free die-cast aluminum
- Use with rigid or IMC conduit
- UL and CSA Listed
- Corrosion resistant
The 1/2 in. Rigid Conduit Coupling can be used inside and outside and is crafted with galvanized steel to help ensure strength. The coupling is designed to join and bond rigid or IMC conduit together. It is UL listed for safety.
- Joins and effectively bonds 2 threaded rigid or IMC conduit runs together
- Suitable for indoor and outdoor applications
- Galvanized steel construction
- Designed to resist corrosion for durability
- UL listed for safety
The 3/4 in. Type LB Threaded Aluminum Conduit Body is designed for gaining access to raceway interiors for wire pulling, splicing and maintenance. The conduit body is made with corrosion-resistant copper-free die-cast aluminum for strength and is suitable for use indoors and outdoors. It is CSA and UL listed to help guarantee safety.
- Designed to gain access to raceway interiors for wire pulling, splicing and maintenance
- For use with IMC and rigid conduit
- For indoor and outdoor applications
- Corrosion-resistant copper-free die-cast aluminum construction
- CSA and UL Listed for safety
Install the 1-1/2 in. Compression Connector between rigid or intermediate metal conduit (IMC) and a steel outlet box or other metal enclosure. It is constructed of zinc-plated galvanized steel. This connector meets UL and CSA requirements.
- Connects rigid or IMC conduit to a steel outlet box or other metal enclosure
- Zinc-plated galvanized steel resists corrosion
- UL and CSA safety listings
- Install indoors and in concrete-tight applications
- Steel-plated compression ring positively bonds conduit to the connector
Be up to code with the 1 in. Plastic Insulating Bushings (2-Pack). These nylon bushings are compatible with threaded rigid or IMC conduit. Use them inside or outdoors.
- Protects wires in threaded rigid or IMC conduit
- High-impact thermoplastic is flame retardant to 105C
- Use required by the NEC
- UL and CSA safety listings
- For indoor or outdoor applications
The Halex 1/2 in. Rigid Conduit Locknuts (200-Pack) is ideal for securing threaded fittings to a steel outlet box. These locknuts are constructed of steel and are zinc-plated for rust resistance. The locknuts can be used indoor or outdoor.
- Secures rigid and IMC conduit to a metal enclosure
- Steel construction with zinc plating
- Compatible with galvanized rigid conduit
- Designed for indoor or outdoor use
This 1/2 in. Rigid Compression Coupling is designed to join and bond lengths of unthreaded rigid conduit. It is made of galvanized steel. Corrosion resistant.
- Joins and effectively bonds 2 lengths of unthreaded rigid conduit
- Galvanized steel for corrosion resistance
- UL and CSA Listed
- May be used indoors and in concrete tight applications
- Use To Cover Exposed Holes In Steel Outlet Boxes and Other Metal Enclosures
- Indoor Use Only
- 10 Per Bag
The 1-1/4 in. Conduit Locknuts (2-Pack) are designed to secure rigid and IMC conduit or various threaded fittings to steel outlet boxes or other metal enclosures. The zinc-plated locknuts are corrosion resistant. They provide a grounded connection.
- Made for connecting rigid and IMC conduit or threaded fittings to steel electrical enclosures
- Cast from corrosion-resistant galvanized steel
- For indoor or outdoor use
- Exceed UL 514B requirements
- Designed to cut through protective coatings on boxes to assure ground continuity
The 1/2 in. Insulated Metallic Grounding Bushings (2-Pack) are designed to provide a means of grounding IMC and rigid conduit. It is made with die-cast zinc alloy for strength and features a thermoplastic lining that is rated at 150 degree F. The bushings are CSA and UL listed to help ensure safety.
- Provides a means of grounding IMC and rigid conduit
- For indoor applications only
- Die-cast zinc alloy construction
- Thermoplastic liner rated at 150 degree F
- Comes with a lug for bonding jumper to a neutral bus bar
- UL and CSA listed for safety
Our Black Button Non-Metallic Push-In Connector for NM Cable. The black button may be used for both 1 or 2 cables and installs easily into KO using light finger pressure. It holds the wires securely and meets and exceeds UL pullout tests. The black button removes very easily with a twist of a screwdriver.
- Fast and easy snap in installation of single or multiple cables
- Easy to remove and reuse
- Made of non-conductive plastic
- Trade size: 3/4 in.
- Knockout size: 3/4 in.
When flexibility is needed, use the 1-1/4 in. Offset Rigid Conduit Nipple. It offsets a conduit by 3/4 in. and is made of high-strength zinc alloy for corrosion resistance. This conduit nipple meets UL and CSA requirements.
- Offsets the axis of a raceway by 3/4 in.
- High-strength, corrosion-resistant zinc alloy construction
- UL and CSA listed
- For indoor and outdoor use
- Corrosion resistant
The 3/4 in. Non-Metallic Type T Conduit Body has a textured lid and a foam in-place gasket. Made of PVC, this conduit body hub is non-threaded and is for use with rigid non-metallic conduit (RNC). Made for indoor and outdoor applications.
- For indoor and outdoor applications
- Made of non-conductive, non-corrosive PVC
- Compatible with RNC conduit
- Maximum operating temperature of 120°F
- UL and CSA listed
The 1-1/2 in. Compression Conduit Coupling is designed to join and bond 2 lengths of threadless IMC or rigid conduit. The coupling is crafted with galvanized steel for strength and is plated with steel for durability. It can be used indoors and in concrete-tight applications.
- Designed to join and bond threadless IMC or rigid conduit
- Use indoors and in concrete-tight applications
- Corrosion-resistant zinc-plated steel construction
- Steel-plated compression ring positively bonds conduit to the connector
- UL and CSA Listed for safety
Use this 1 in. Chase Conduit Nipple to connect threaded conduit to an enclosure knockout. With a locknut (not included), this fitting can be used as a short raceway between boxes or enclosures. This conduit nipple meets UL and CSA requirements.
- Connects threaded conduit to a metal enclosure knockout
- Use with a locknut (not included) as a raceway between two enclosures
- Made of high-strength, corrosion-resistant zinc alloy
- UL and CSA listings
- Usable indoors or outdoors
The 3/4 in. 2-Hole Conduit Straps (10-Pack) are designed to secure EMT conduit to wood, masonry or similar surfaces. The straps have a high load-bearing capacity and snap onto the conduit to hold it securely in place. Corrosion resistant.
- Heavy-duty conduit straps for RIGID/IMC conduit
- Made of corrosion-resistant galvanized steel
- Can be used for indoor and outdoor applications
- UL Listed
The 1 in. Non-Metallic Type T Conduit Body is a non-conductive fitting. This conduit body hub is not threaded and has a textured lid along with an in-place gasket. This conduit body is compatible with Rigid Non-Metallic Conduit (RNC).
- Made of non-conductive, non-corrosive PVC
- Compatible with RNC conduit
- Maximum working temperature of 120°F
- UL and CSA listed
The 1 in. 90 degree Steel Conduit Elbow facilitates a 90 degree change of direction in a run of rigid or intermediate metal conduit (IMC). It features large radii to help with wire pulling. Large radii for easier wire pulling.
- Allows for a 90 degree change of direction in a run of rigid or IMC conduit
- Galvanized steel for corrosion resistance
- For indoor or outdoor applications
- UL and CSA safety listings