Rigid Conduit Fittings
The 1-1/4 in. Rigid or IMC Insulated Metallic Grounding Bushing is a vital safety fitting for your run of conduit. Use this zinc alloy bushing with a locknut indoors only. This grounding bushing meets UL and CSA requirements.
- Grounds threaded rigid or IMC conduit
- Die cast of high-strength zinc alloy for corrosion resistance
- For use with a locknut
- UL and CSA listed
- Thermoplastic liner rated at 150 degree C
- For indoor applications
Use the 1 in. Rigid or IMC Conduit 1-Hole Strap when extra load bearing is needed to attach conduit to wood, masonry or a like surface. This zinc-plated strap snaps in place. Positively snaps onto the conduit.
- Secures rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL Listed
- For indoor or outdoor applications
The 1-1/4 in. Conduit Locknuts (2-Pack) are designed to secure rigid and IMC conduit or various threaded fittings to steel outlet boxes or other metal enclosures. The zinc-plated locknuts are corrosion resistant. They provide a grounded connection.
- Made for connecting rigid and IMC conduit or threaded fittings to steel electrical enclosures
- Cast from corrosion-resistant galvanized steel
- For indoor or outdoor use
- Exceed UL 514B requirements
- Designed to cut through protective coatings on boxes to assure ground continuity
The 2 in. 2-Hole Conduit Straps (2-Pack) are designed to secure conduit to wood, masonry or similar surfaces where greater load bearing is required. The corrosion-resistant straps are constructed of galvanized steel with a zinc-plated finish. Straps positively snap on conduit when installed.
- Use to secure conduit to wood, masonry or similar surfaces where greater load bearing is required
- Galvanized-steel construction
- Zinc-plated finish
- Corrosion resistant
- Compatible with galvanized-rigid conduit (GRC) and intermediate metal conduit (IMC)
- CSA and UL Listed
Use the 3/4 in. Conduit Locknuts (4-Pack) to secure RIGID and IMC conduit and various threaded fittings to steel outlet boxes and other metal enclosures. Zinc plated for corrosion resistance. These conduit locknuts can be used for outdoor applications.
- Indoor and outdoor use
- Zinc-plated steel for corrosion resistance
- Exceeds UL 514B safety requirements
- Designed to cut through protective coatings on boxes and enclosures to assure ground continuity
To connect threaded rigid or intermediate metal conduit (IMC) to holes in metal boxes or enclosures, use the 1/2 in. Chase Conduit Nipples (2-Pack). The nipples can also be used along with locknuts to create short raceways between boxes or enclosures. These Nipples meet UL and CSA requirements.
- Terminate threaded rigid or IMC conduit to punched, cut or drilled holes in metal boxes or enclosures
- Use with locknuts to provide short raceways between boxes or enclosures
- High-strength die-cast zinc alloy for corrosion resistance
- UL and CSA safety listings
- For indoor or outdoor applications
The 3/4 in. 2-Hole Conduit Straps (10-Pack) are designed to secure EMT conduit to wood, masonry or similar surfaces. The straps have a high load-bearing capacity and snap onto the conduit to hold it securely in place. Corrosion resistant.
- Heavy-duty conduit straps for RIGID/IMC conduit
- Made of corrosion-resistant galvanized steel
- Can be used for indoor and outdoor applications
- UL Listed
The 1 in. x 3/4 in. Reducing Bushing is die cast of durable zinc alloy and suitable for indoor use only. The bushing is designed to reduce the entry size of a run of threaded rigid conduit or intermediate metal conduit (IMC). UL and CSA listed for safety and peace of mind.
- Reduces the run entry size of threaded rigid conduit and IMC
- Zinc alloy is high strength and non-corrosive
- Compatible with rigid conduit and IMC
- Designed for indoor use only
The 3/4 in. Type LB Threaded Aluminum Conduit Body is designed for gaining access to raceway interiors for wire pulling, splicing and maintenance. The conduit body is made with corrosion-resistant copper-free die-cast aluminum for strength and is suitable for use indoors and outdoors. It is CSA and UL listed to help guarantee safety.
- Designed to gain access to raceway interiors for wire pulling, splicing and maintenance
- For use with IMC and rigid conduit
- For indoor and outdoor applications
- Corrosion-resistant copper-free die-cast aluminum construction
- CSA and UL Listed for safety
The 1-1/4 in. Plastic Insulated Bushing is designed to protect wires in threaded rigid or IMC conduits. It is made of heat-tolerant thermoplastic and can be used in indoor or outdoor environments. This bushing meets UL and CSA requirements.
- Protects wires in threaded rigid or IMC conduits
- Made of high-impact thermoplastic to withstand high-temperature environments
- Can be used indoors or outdoors
- UL and CSA Listed
Choose the 3/4 in. Rigid Conduit Coupling when you need to connect segments of threaded rigid or intermediate metal conduit (IMC). You can use this galvanized steel coupling indoors or outdoors. This coupling meets UL and CSA requirements.
- Joins 2 lengths of threaded rigid or IMC conduit
- Galvanized steel resists corrosion
- UL and CSA safety listings
- For indoor or outdoor applications
The 1/2 in. Non-Metallic Type T Conduit Body is a non-threaded body hub made of PVC. The conduit body has a textured lid and a foam in-place gasket. This fitting is compatible with rigid non-metallic conduit (RNC) and can be used for indoor and outdoor applications.
- For indoor and outdoor use
- Made of non-corrosive, non-conductive PVC
- Compatible with RNC conduit
- Maximum working temperature of 120°F
- UL and CSA listed
The 1-1/2 in. Conduit Locknut (2-Pack) secures rigid conduit and intermediate metal conduit (IMC) or various threaded fittings to steel outlet boxes or other metal enclosures. Cuts through protective coatings on enclosures for ground continuity. Exceeds UL 514B requirements.
- Secures conduit or other threaded fittings to metal enclosures
- Zinc plated steel locknut is non-corrosive
- Compatible with rigid conduit and IMC
- Designed for use inside or outside of a box on fittings or on conduit
The 1/2 in. Type LB Threaded Aluminum Conduit Body is designed to gain access to the interior of a raceway for wire pulling, maintenance and splicing. It can be used with rigid and IMC conduit and is made with corrosion-resistant, copper-free die-cast aluminum. The conduit body is UL and CSA listed for safety.
- Designed to gain access to raceway interiors for wire pulling, splicing, and maintenance
- For use with rigid and IMC conduit
- For indoor and outdoor applications
- Corrosion-resistant, copper-free die-cast aluminum
- UL and CSA Listed to help ensure safety
The 2 in. Conduit Locknuts (2-Pack) are designed to secure rigid and IMC conduit or various threaded fittings to steel outlet boxes or other metal enclosures. They provide a grounded connection and are suitable for indoor applications. Designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Secure rigid and IMC conduit or threaded fittings to metal electrical enclosures
- Made of galvanized steel
- Exceed UL 514B requirements
- Cut through protective coatings on boxes to assure ground continuity
This 3/4 in. 1-Hole Conduit Straps (4-Pack) are designed for high load bearing and are handy for securing rigid or IMC conduit to a variety of work surfaces. The corrosion-resistant steel snaps onto the conduit to keep it in place. These conduit straps meet UL and CSA requirements.
- Designed for securing heavy-duty rigid or IMC conduit to a variety of work surfaces
- For indoor or outdoor applications
- Made of corrosion-resistant galvanized steel
- Snaps onto the conduit to keep it in place
- UL and CSA Listed
- Installs quickly and easily
1 in. x 3/4 in. Rigid or IMC Conduit Reducing Washers (2-Pack) effectively reduce the size of the knockout in a steel outlet box or other metal enclosure. Each knockout requires 2 of these galvanized washers. Trade sizes are clearly marked on each washer.
- Reduce the size of the knockout in a steel outlet box or other metal enclosure
- Use 1 washer inside the enclosure opening and 1 outside
- Galvanized steel
- UL listed
- Raised flanges allow for positive seating in the knockout
These 3/4 in. x 1/2 in. Conduit Reducing Washers (4-Pack) reduce the size of knockouts in metal enclosures such as steel outlet boxes. They feature raised flanges which enable positive seating in the knockouts. Requires 2 washers per knockout.
- Reduces the size of the knockout in a steel outlet box or other metal enclosure
- Galvanized steel resists corrosion
- Raised flanges allow for positive seating in the knockout
- Trade sizes marked on each washer
- UL listed
- Usable indoors or outdoors
The 3/4 in. Threadless Compression Conduit Connectors (2-Pack) are designed to connect and effectively bond rigid conduit and intermediate metal conduit (IMC) to metal enclosures. Made of zinc-plated steel. These connectors meet UL and CSA requirements.
- Connects and positively bonds conduit to a steel outlet box or other metal enclosure
- Zinc-plated steel construction resists corrosion
- Compatible with rigid conduit and intermediate metal conduit (IMC)
- UL and CSA listed for safety
- Designed for indoor use and in concrete tight applications
The 1-1/2 in. Insulated Grounding Bushings (2-Pack) are designed to insulate and ground threaded rigid or IMC conduit. They are made of zinc alloy with a thermoplastic, heat-tolerant liner. A lug is provided for bonding the jumper to a neutral bus bar.
- Insulate and ground threaded rigid or IMC conduit
- Made of zinc alloy with a thermoplastic liner
- UL and CSA listed
- Lug included for connecting the jumper to a neutral bus bar
- For indoor use only
The 1/2 in. Rigid or IMC Offset Conduit Nipple lets you offset the axis of a raceway by 3/4 in. Made of zinc alloy, it is strong and resists corrosion. This conduit nipple meets UL and CSA requirements.
- Provides a 3/4 in. offset when flexibility is needed to finish an installation using multiple boxes and enclosures
- Die-cast of high-strength zinc alloy for corrosion resistance
- UL and CSA Listed
- For indoor or outdoor applications
- Corrosion resistant
Use these 1 in. Conduit Locknuts (2-Pack) to secure conduit to steel outlet boxes and other metal enclosures. They are designed to cut through protective coatings to ensure ground continuity. Designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Secures conduit to metal enclosures such as steel outlet boxes
- Zinc-plated steel for corrosion resistance
- Usable both inside and outside of a box
- Cuts through protective coatings on boxes and enclosures ensuring ground continuity
The 3/4 in. Rigid Chase Conduit Nipple, used with a rigid coupling, connects conduit to a hole in a metal box or enclosure. This zinc alloy nipple also provides a short raceway between boxes or enclosures when used with a locknut. This conduit nipple meets UL and CSA requirements.
- Used with a rigid coupling to terminate threaded conduit to a hole in a metal box or enclosure
- Use with a locknut to provide a short raceway between boxes or enclosures
- Die-cast high-strength zinc alloy
- UL and CSA Listed
- For indoor or outdoor applications
The 2 in. Plastic Insulated Bushings (4-Pack) are designed to protect wires in threaded rigid or IMC conduits. They are made of heat-tolerant thermoplastic and can be used in indoor or outdoor environments. These bushings meet UL and CSA requirements.
- Protect wires in threaded rigid or IMC conduits
- Made from thermoplastic to withstand high-temperature environments
- Can be used indoors or outdoors
- UL and CSA listed
The 1 in. Offset Conduit Nipple is designed to offset raceway axes by 3/4 in. It is made from corrosion-resistant die-cast zinc alloy for strength. This nipple can be used indoors and outdoors. The nipple is CSA and UL listed to help guarantee safety.
- Designed to offset raceway axes by 3/4 in.
- For indoor and outdoor applications
- For use with IMC and rigid conduit
- Corrosion-resistant die-cast zinc alloy construction
- UL and CSA Listed for safety
Be up to code with the 1 in. Plastic Insulating Bushings (2-Pack). These nylon bushings are compatible with threaded rigid or IMC conduit. Use them inside or outdoors.
- Protects wires in threaded rigid or IMC conduit
- High-impact thermoplastic is flame retardant to 105C
- Use required by the NEC
- UL and CSA safety listings
- For indoor or outdoor applications
The 3/4 in. x 1/2 in. Reducer Bushing is intended to reduce the entry size of a run of threaded conduit. The bushing is CSA- and UL listed for use with Rigid or intermediate metal conduit (IMC). Used for indoor applications.
- Use to reduce the entry size of a run of threaded conduit
- Die-cast-zinc alloy is high strength
- Corrosion resistant
- Compatible with rigid conduit and IMC
- For indoor use
- CSA- and UL Listed
Depend on 1-1/2 in. Rigid or IMC 2-Hole Conduit Straps (2-Pack) to help fix conduit to wood or masonry. Zinc-plated to resist corrosion, they are for indoor and outdoor use. Positively snaps onto the conduit.
- Secures rigid or IMC conduit to wood, masonry or a similar surface where greater load bearing is required
- Zinc-plated steel for corrosion resistance
- UL Listed
- For indoor or outdoor applications
The 1/2 in. ENT Snap-on Male Adapter snaps onto electrical non-metallic tubing (ENT) and into a knockout box. Designed for use to connect electrical non-metallic tubing (ENT) and ENT quick set cement, the adapters are suitable for damp locations. The one piece quick connect design make installation of this adapter quick, easy and safe.
- 1/2 in. ENT adapter for connecting Electrical Non-Metallic Tubing (ENT)
- Adapter is compatible with ENT when used with ENT cement
- Durable PVC construction is non-corrosive, non-conductive and suitable for damp locations
- Snap-in adapters on both ends for quick and easy installation
- UL listed
Use this 2 in. Conduit Chase Nipple along with a rigid coupling to terminate a run of threaded conduit into an enclosure box. This zinc chase nipple is rated for both indoor and outdoor use. The Chase Nipple meets UL and CSA requirements.
- Use with a rigid coupling to terminate threaded conduit into a box
- Made of zinc
- UL and CSA listed
- Usable indoors or outdoors
- Corrosion resistant
The 1/2 in. Conduit Locknut (20-Pack) attaches rigid conduit and intermediate metal conduit (IMC) or other threaded fittings to steel outlet boxes and various metal enclosures. Cuts through protective coatings on enclosures for ground continuity. Exceeds UL 514B requirements.
- Secures conduit or other threading fittings to metal enclosures
- Zinc plated steel locknut is non-corrosive
- Compatible with rigid conduit and IMC
- Designed for use inside or outside of a box on fittings or on conduit
Where load bearing is required, use these 1/2 in. 1-Hole Conduit Straps (100-Pack) to secure IMC and rigid conduit to surfaces such as wood and masonry. They are made of steel and electro-plated with zinc for corrosion resistance. These conduit straps may be used indoor or outdoor.
- Secures IMC and rigid conduit to surfaces such as wood or masonry where greater load bearing is required
- Zinc-plated steel for corrosion resistance
- UL and CSA Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
Use a pair of 1 in. x 1/2 in. Rigid or IMC Conduit Reducing Washers (2-Pack) to reduce the knockout in a steel outlet box or similar enclosure. Each washer has a raised flange for positive seating. Corrosion resistant.
- Reduces the size of the knockout in a steel outlet box or other metal enclosure
- 2 washers required per knockout
- Galvanized steel is corrosion resistant
- UL and CSA listed
- Raised flanges allow for positive seating in the knockout
- For indoor or outdoor applications
Use this 2-1/2 in. Conduit Locknut to help install a length of rigid or IMC conduit on a steel outlet box or other metal enclosure. It cuts through the protective coating to preserve ground continuity. Use Indoor or outdoor.
- Secures a rigid or IMC conduit or threaded fitting to a steel outlet box or other metal enclosure
- Cuts through the protective coating on a box or enclosure to assure ground continuity
- Zinc-plated steel resists corrosion
- For indoor or outdoor application
- Exceeds UL 514B requirements
The 3/4 in. Offset Conduit Nipple is designed to provide an offset when flexibility is needed to finish off installations using multiple boxes and enclosures. It is made of corrosion-resistant zinc alloy and designed for use with rigid or IMC conduit. This conduit nipple meets UL and CSA requirements.
- Provides flexibility in multiple-box installations
- Offsets the axis of raceways
- Corrosion-resistant, high-strength zinc alloy
- Can be installed indoors or outdoors
- UL and CSA listed
3/4 in. 1-Hole Rigid Straps (100-Pack) secure IMC or rigid conduit on surfaces such as wood and masonry. They are made of steel and have zinc plating for corrosion resistance. The straps may be used indoors or outdoors.
- Secures IMC or rigid conduit to surfaces such as wood or masonry where greater load bearing is required
- Zinc-plated steel for corrosion resistance
- UL and CSA Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
The 2 in. Offset Conduit Nipple is designed to provide an offset when flexibility is needed to finish off installations using multiple boxes and enclosures. It is made of corrosion-resistant zinc alloy and designed for use with rigid or IMC conduit. This Conduit Nipple meets UL and CSA requirements.
- Provides flexibility in multiple-box installations
- Offsets the axis of raceways
- Corrosion-resistant, high-strength zinc alloy
- Can be installed indoors or outdoors
- UL and CSA Listed
The 1/2 in. Rigid Conduit Coupling can be used inside and outside and is crafted with galvanized steel to help ensure strength. The coupling is designed to join and bond rigid or IMC conduit together. It is UL listed for safety.
- Joins and effectively bonds 2 threaded rigid or IMC conduit runs together
- Suitable for indoor and outdoor applications
- Galvanized steel construction
- Designed to resist corrosion for durability
- UL listed for safety
The 1-1/4 in. Threaded Conduit Body is designed to gain access to the interior of a raceway for wire pulling, inspections and maintenance. The elbow has a cover and gasket for easy access. It is suitable for rigid or IMC cable.
- Designed for easy access to the interior of raceways
- Made of copper-free die-cast aluminum
- Use with rigid or IMC conduit
- UL and CSA listed
- Corrosion resistant
The 1-1/4 in. 2-Hole Conduit Straps (4-Pack) are designed to secure rigid or IMC conduit to wood, masonry or similar surfaces. The straps have a high load-bearing capacity and snap onto the conduit to hold it securely in place. Corrosion resistant.
- Heavy-duty conduit straps for securing rigid or IMC conduit to work surfaces
- Made of corrosion-resistant galvanized steel
- Can be used for indoor or outdoor applications
- UL Listed
The 1/2 in. Conduit Pull Elbow has a gasket and removable cover to facilitate wire pulling and maintenance through a sharp bend in a run of threaded rigid or IMC conduit. It is die-cast of corrosion-resistant zinc alloy. This pull elbow meets UL and CSA requirements.
- Facilitates wire pulling and maintenance in rigid or IMC conduit
- Removable cover allows easy access
- Die-cast of high-strength zinc alloy
- UL and CSA Listed
- Corrosion resistant
- Zinc Alloy
- 3/8" Greenfield (Flex)
- 14/2,12/3 Bx
Secure rigid conduit to wood or masonry surfaces with this 1/2 in. Rigid 1-Hole Strap. It snaps onto the conduit when installed. It is usable for both indoor and outdoor applications.
- Secures rigid conduit to surfaces such as wood or masonry
- Corrosion-resistant galvanized steel
- UL Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
The 1-1/2 in. Plastic Insulating Bushings (4-Pack) are for use on threaded IMC or rigid conduit to protect the wires. The bushings are made of high-impact, fire-retardant thermoplastic. These bushings meet UL and CSA requirements.
- Use on threaded IMC or rigid conduit to protect the wires
- Constructed of high-impact thermoplastic
- Flame retardant to 105Û£ degree C
- Compatible with threaded GRC and IMC
- For indoor or outdoor use
- CSA and UL listed
Connectors that are used for standard metal-clad cables. Product is made from galvanized steel and is made to fit to afc cable systems mc cable products. Connectors come 25 pieces to a package.
- Standard connectors for mc cables
- 25 Connectors per package
- Galvanized steel material
- Compatible with all manufacturer brands of mc cables
2 in. x 10 ft. Galvanized RIGID Steel Conduit provides a damage-resistant duct for electrical conductors and cables. This conduit shields internal wires from magnetic fields and features electroplated couplings to resist buildup of zinc on the threads. Galvanized Rigid Steel Conduit (GRC, RMC) is the heaviest weight and thickest wall of electrical conduits. Allied Tube & Conduit's Galvanized Rigid Steel Conduit is hot-dip galvanized for corrosion resistance and is considered non-combustible. Galvanized Rigid Steel Conduit (GRC, RMC) can be used indoors, outdoors, underground, concealed or exposed.
- Protects insulated electrical conductors and cables from magnetic fields, impact damage and crushing
- Hot-dip galvanized for excellent corrosion resistance
- High strength ductile steel for long life and easy bending
- Smooth, continuous raceways for fast wire pulling
- Kwik-release end cap to protect threads
- Listed to safety standard UL 6
- Manufactured in accordance with ANSI C80.1
This 1/2 in. Rigid Compression Coupling is designed to join and bond lengths of unthreaded rigid conduit. It is made of galvanized steel. Corrosion resistant.
- Joins and effectively bonds 2 lengths of unthreaded rigid conduit
- Galvanized steel for corrosion resistance
- UL and CSA Listed
- May be used indoors and in concrete tight applications
