Searched for "39131700"
The 3/4 in. Type LB Threaded Aluminum Conduit Body is designed for gaining access to raceway interiors for wire pulling, splicing and maintenance. The conduit body is made with corrosion-resistant copper-free die-cast aluminum for strength and is suitable for use indoors and outdoors. It is CSA and UL listed to help guarantee safety.
- Designed to gain access to raceway interiors for wire pulling, splicing and maintenance
- For use with IMC and rigid conduit
- For indoor and outdoor applications
- Corrosion-resistant copper-free die-cast aluminum construction
- CSA and UL Listed for safety
The 3/4 in. Threadless Compression Conduit Connectors (2-Pack) are designed to connect and effectively bond rigid conduit and intermediate metal conduit (IMC) to metal enclosures. Made of zinc-plated steel. These connectors meet UL and CSA requirements.
- Connects and positively bonds conduit to a steel outlet box or other metal enclosure
- Zinc-plated steel construction resists corrosion
- Compatible with rigid conduit and intermediate metal conduit (IMC)
- UL and CSA listed for safety
- Designed for indoor use and in concrete tight applications
The 3/4 in. 2-Hole Conduit Straps (10-Pack) are designed to secure EMT conduit to wood, masonry or similar surfaces. The straps have a high load-bearing capacity and snap onto the conduit to hold it securely in place. Corrosion resistant.
- Heavy-duty conduit straps for RIGID/IMC conduit
- Made of corrosion-resistant galvanized steel
- Can be used for indoor and outdoor applications
- UL Listed
The 1/2 in. Rigid or IMC Offset Conduit Nipple lets you offset the axis of a raceway by 3/4 in. Made of zinc alloy, it is strong and resists corrosion. This conduit nipple meets UL and CSA requirements.
- Provides a 3/4 in. offset when flexibility is needed to finish an installation using multiple boxes and enclosures
- Die-cast of high-strength zinc alloy for corrosion resistance
- UL and CSA Listed
- For indoor or outdoor applications
- Corrosion resistant
The 1/2 in. Non-Metallic Type T Conduit Body is a non-threaded body hub made of PVC. The conduit body has a textured lid and a foam in-place gasket. This fitting is compatible with rigid non-metallic conduit (RNC) and can be used for indoor and outdoor applications.
- For indoor and outdoor use
- Made of non-corrosive, non-conductive PVC
- Compatible with RNC conduit
- Maximum working temperature of 120°F
- UL and CSA listed
Choose the 3/4 in. Rigid Conduit Coupling when you need to connect segments of threaded rigid or intermediate metal conduit (IMC). You can use this galvanized steel coupling indoors or outdoors. This coupling meets UL and CSA requirements.
- Joins 2 lengths of threaded rigid or IMC conduit
- Galvanized steel resists corrosion
- UL and CSA safety listings
- For indoor or outdoor applications
Use these 1 in. Conduit Locknuts (2-Pack) to secure conduit to steel outlet boxes and other metal enclosures. They are designed to cut through protective coatings to ensure ground continuity. Designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Secures conduit to metal enclosures such as steel outlet boxes
- Zinc-plated steel for corrosion resistance
- Usable both inside and outside of a box
- Cuts through protective coatings on boxes and enclosures ensuring ground continuity
The 1 in. Offset Conduit Nipple is designed to offset raceway axes by 3/4 in. It is made from corrosion-resistant die-cast zinc alloy for strength. This nipple can be used indoors and outdoors. The nipple is CSA and UL listed to help guarantee safety.
- Designed to offset raceway axes by 3/4 in.
- For indoor and outdoor applications
- For use with IMC and rigid conduit
- Corrosion-resistant die-cast zinc alloy construction
- UL and CSA Listed for safety
Secure rigid conduit to wood or masonry surfaces with this 1/2 in. Rigid 1-Hole Strap. It snaps onto the conduit when installed. It is usable for both indoor and outdoor applications.
- Secures rigid conduit to surfaces such as wood or masonry
- Corrosion-resistant galvanized steel
- UL Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
The 1-1/2 in. Plastic Insulating Bushings (4-Pack) are for use on threaded IMC or rigid conduit to protect the wires. The bushings are made of high-impact, fire-retardant thermoplastic. These bushings meet UL and CSA requirements.
- Use on threaded IMC or rigid conduit to protect the wires
- Constructed of high-impact thermoplastic
- Flame retardant to 105Û£ degree C
- Compatible with threaded GRC and IMC
- For indoor or outdoor use
- CSA and UL listed
The 2 in. Plastic Insulated Bushings (4-Pack) are designed to protect wires in threaded rigid or IMC conduits. They are made of heat-tolerant thermoplastic and can be used in indoor or outdoor environments. These bushings meet UL and CSA requirements.
- Protect wires in threaded rigid or IMC conduits
- Made from thermoplastic to withstand high-temperature environments
- Can be used indoors or outdoors
- UL and CSA listed
The 1-1/4 in. Rigid or IMC Insulated Metallic Grounding Bushing is a vital safety fitting for your run of conduit. Use this zinc alloy bushing with a locknut indoors only. This grounding bushing meets UL and CSA requirements.
- Grounds threaded rigid or IMC conduit
- Die cast of high-strength zinc alloy for corrosion resistance
- For use with a locknut
- UL and CSA listed
- Thermoplastic liner rated at 150 degree C
- For indoor applications
The 2 in. Conduit Locknuts (2-Pack) are designed to secure rigid and IMC conduit or various threaded fittings to steel outlet boxes or other metal enclosures. They provide a grounded connection and are suitable for indoor applications. Designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Secure rigid and IMC conduit or threaded fittings to metal electrical enclosures
- Made of galvanized steel
- Exceed UL 514B requirements
- Cut through protective coatings on boxes to assure ground continuity
Use this 2 in. Conduit Chase Nipple along with a rigid coupling to terminate a run of threaded conduit into an enclosure box. This zinc chase nipple is rated for both indoor and outdoor use. The Chase Nipple meets UL and CSA requirements.
- Use with a rigid coupling to terminate threaded conduit into a box
- Made of zinc
- UL and CSA listed
- Usable indoors or outdoors
- Corrosion resistant
The 2-1/2 in. Insulated Plastic Bushing is designed to protect wires in threaded rigid or IMC conduits. It is made of heat-tolerant thermoplastic. It can be used in indoor or outdoor environments.
- Protects wires in threaded rigid or IMC conduits
- Made from thermoplastic to withstand high-temperature environments
- Can be used indoors or outdoors
- UL and CSA listed
Use this 2-1/2 in. Conduit Locknut to help install a length of rigid or IMC conduit on a steel outlet box or other metal enclosure. It cuts through the protective coating to preserve ground continuity. Use Indoor or outdoor.
- Secures a rigid or IMC conduit or threaded fitting to a steel outlet box or other metal enclosure
- Cuts through the protective coating on a box or enclosure to assure ground continuity
- Zinc-plated steel resists corrosion
- For indoor or outdoor application
- Exceeds UL 514B requirements
Use 1/2 in. Rigid or IMC Compression Connectors (2-Pack) to connect rigid or IMC conduit to steel outlet boxes or other metal enclosures. A steel-plated compression ring positively bonds the conduit to the connector. This connector meets UL and CSA requirements.
- Connects and effectively bonds rigid or IMC conduit to a steel outlet box or other metal enclosure
- Zinc-plated steel resists corrosion
- UL and CSA Listed
- Steel-plated compression ring positively bonds conduit to the connector
- Use indoors and in concrete-tight applications
1 in. x 3/4 in. Rigid or IMC Conduit Reducing Washers (2-Pack) effectively reduce the size of the knockout in a steel outlet box or other metal enclosure. Each knockout requires 2 of these galvanized washers. Trade sizes are clearly marked on each washer.
- Reduce the size of the knockout in a steel outlet box or other metal enclosure
- Use 1 washer inside the enclosure opening and 1 outside
- Galvanized steel
- UL listed
- Raised flanges allow for positive seating in the knockout
The 1/2 in. 2-Hole Conduit Straps (10-Pack) are designed to secure rigid or IMC conduit to wood, masonry or similar surfaces. The straps have a high load-bearing capacity and snap onto a conduit to hold it securely in place. Positively snaps on a conduit when installed.
- Heavy-duty conduit straps for securing rigid or IMC conduit
- Made of corrosion-resistant galvanized steel
- Can be used for indoor and outdoor applications
- UL Listed
The 1/2 in. Conduit Locknut (20-Pack) attaches rigid conduit and intermediate metal conduit (IMC) or other threaded fittings to steel outlet boxes and various metal enclosures. Cuts through protective coatings on enclosures for ground continuity. Exceeds UL 514B requirements.
- Secures conduit or other threading fittings to metal enclosures
- Zinc plated steel locknut is non-corrosive
- Compatible with rigid conduit and IMC
- Designed for use inside or outside of a box on fittings or on conduit
These 3/4 in. x 1/2 in. Conduit Reducing Washers (4-Pack) reduce the size of knockouts in metal enclosures such as steel outlet boxes. They feature raised flanges which enable positive seating in the knockouts. Requires 2 washers per knockout.
- Reduces the size of the knockout in a steel outlet box or other metal enclosure
- Galvanized steel resists corrosion
- Raised flanges allow for positive seating in the knockout
- Trade sizes marked on each washer
- UL listed
- Usable indoors or outdoors
The 3/4 in. Offset Conduit Nipple is designed to provide an offset when flexibility is needed to finish off installations using multiple boxes and enclosures. It is made of corrosion-resistant zinc alloy and designed for use with rigid or IMC conduit. This conduit nipple meets UL and CSA requirements.
- Provides flexibility in multiple-box installations
- Offsets the axis of raceways
- Corrosion-resistant, high-strength zinc alloy
- Can be installed indoors or outdoors
- UL and CSA listed
The Halex 1/2 in. Rigid Conduit Locknuts (200-Pack) is ideal for securing threaded fittings to a steel outlet box. These locknuts are constructed of steel and are zinc-plated for rust resistance. The locknuts can be used indoor or outdoor.
- Secures rigid and IMC conduit to a metal enclosure
- Steel construction with zinc plating
- Compatible with galvanized rigid conduit
- Designed for indoor or outdoor use
Use the Halex 3/4 in. Insulating Bushings (10-Pack) with locknuts to terminate threaded rigid conduits and intermediate metal conduits (IMC) to outlet boxes. The rounded surface of the bushings prevents damage to wire insulation. Insulating bushings are required by the National Electrical Code (NEC).
- Use to terminate a threaded rigid or IMC conduit to an outlet box
- Indoor or outdoor use
- Made from high-impact thermoplastic that is flame retardant to 150 degree C
- UL and CSA Listed
- Required by the NEC