Searched for "39131700"
The 1/2 in. Non-Metallic Type T Conduit Body is a non-threaded body hub made of PVC. The conduit body has a textured lid and a foam in-place gasket. This fitting is compatible with rigid non-metallic conduit (RNC) and can be used for indoor and outdoor applications.
- For indoor and outdoor use
- Made of non-corrosive, non-conductive PVC
- Compatible with RNC conduit
- Maximum working temperature of 120°F
- UL and CSA listed
The 3/4 in. Offset Conduit Nipple is designed to provide an offset when flexibility is needed to finish off installations using multiple boxes and enclosures. It is made of corrosion-resistant zinc alloy and designed for use with rigid or IMC conduit. This conduit nipple meets UL and CSA requirements.
- Provides flexibility in multiple-box installations
- Offsets the axis of raceways
- Corrosion-resistant, high-strength zinc alloy
- Can be installed indoors or outdoors
- UL and CSA listed
The 2 in. Conduit Locknuts (2-Pack) are designed to secure rigid and IMC conduit or various threaded fittings to steel outlet boxes or other metal enclosures. They provide a grounded connection and are suitable for indoor applications. Designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Secure rigid and IMC conduit or threaded fittings to metal electrical enclosures
- Made of galvanized steel
- Exceed UL 514B requirements
- Cut through protective coatings on boxes to assure ground continuity
The 1/2 in. Type LB Threaded Aluminum Conduit Body is designed to gain access to the interior of a raceway for wire pulling, maintenance and splicing. It can be used with rigid and IMC conduit and is made with corrosion-resistant, copper-free die-cast aluminum. The conduit body is UL and CSA listed for safety.
- Designed to gain access to raceway interiors for wire pulling, splicing, and maintenance
- For use with rigid and IMC conduit
- For indoor and outdoor applications
- Corrosion-resistant, copper-free die-cast aluminum
- UL and CSA Listed to help ensure safety
The 3/4 in. Threadless Compression Conduit Connectors (2-Pack) are designed to connect and effectively bond rigid conduit and intermediate metal conduit (IMC) to metal enclosures. Made of zinc-plated steel. These connectors meet UL and CSA requirements.
- Connects and positively bonds conduit to a steel outlet box or other metal enclosure
- Zinc-plated steel construction resists corrosion
- Compatible with rigid conduit and intermediate metal conduit (IMC)
- UL and CSA listed for safety
- Designed for indoor use and in concrete tight applications
The 2 in. Threadless Compression Conduit Connector is designed to connect and bond IMC and rigid conduit to steel outlet boxes and other metal enclosures. It is made with corrosion-resistant zinc-plated steel for strength and features a steel-plated compression ring that positively bonds the conduit to the connector. CSA and UL listed for safety.
- Connects and bonds IMC and rigid conduit to steel outlet boxes and other metal enclosures
- May be used indoors and in concrete-tight applications
- Corrosion-resistant zinc-plated steel construction
- Steel-plated compression ring positively bonds conduit to the connector
Use the Halex 3/4 in. Insulating Bushings (10-Pack) with locknuts to terminate threaded rigid conduits and intermediate metal conduits (IMC) to outlet boxes. The rounded surface of the bushings prevents damage to wire insulation. Insulating bushings are required by the National Electrical Code (NEC).
- Use to terminate a threaded rigid or IMC conduit to an outlet box
- Indoor or outdoor use
- Made from high-impact thermoplastic that is flame retardant to 150 degree C
- UL and CSA Listed
- Required by the NEC
- For Armored Cable and Flexible Steel Conduit (Greenfield)
- Made Of Die-Cast Zinc
The 1-1/2 in. Conduit Locknut (2-Pack) secures rigid conduit and intermediate metal conduit (IMC) or various threaded fittings to steel outlet boxes or other metal enclosures. Cuts through protective coatings on enclosures for ground continuity. Exceeds UL 514B requirements.
- Secures conduit or other threaded fittings to metal enclosures
- Zinc plated steel locknut is non-corrosive
- Compatible with rigid conduit and IMC
- Designed for use inside or outside of a box on fittings or on conduit
The 2 in. Offset Conduit Nipple is designed to provide an offset when flexibility is needed to finish off installations using multiple boxes and enclosures. It is made of corrosion-resistant zinc alloy and designed for use with rigid or IMC conduit. This Conduit Nipple meets UL and CSA requirements.
- Provides flexibility in multiple-box installations
- Offsets the axis of raceways
- Corrosion-resistant, high-strength zinc alloy
- Can be installed indoors or outdoors
- UL and CSA Listed
The 3/4 in. ENT Snap-on Male Adapter snaps onto electrical non-metallic tubing (ENT) and into a knockout box. Designed for use to connect electrical non-metallic tubing (ENT) and ENT quick set cement, the adapters are suitable for damp locations. The 1-piece quick connect design make installation of this adapter quick, easy and safe.
- 3/4 in. ENT male adapter for connecting Electrical Non-Metallic Tubing (ENT)
- Adapter is compatible with ENT when used with ENT cement
- Durable PVC construction is non-corrosive, non-conductive and suitable for damp locations
- Snap-in adapters on both ends for quick and easy installation
- UL listed
- Suitable for damp locations
The 3/4 in. 2-Hole Conduit Straps (10-Pack) are designed to secure EMT conduit to wood, masonry or similar surfaces. The straps have a high load-bearing capacity and snap onto the conduit to hold it securely in place. Corrosion resistant.
- Heavy-duty conduit straps for RIGID/IMC conduit
- Made of corrosion-resistant galvanized steel
- Can be used for indoor and outdoor applications
- UL Listed
The 1-1/2 in. Type LB Threaded Rigid or IMC Conduit Body makes wire pulling, splicing and other raceway tasks easier. It is Die-cast of aluminum and resists corrosion whether indoors or outdoors. This conduit body meets UL and CSA requirements.
- Grants access to the interior of a rigid or IMC raceway for wire pulling, splicing and maintenance
- Copper-free die-cast aluminum resists corrosion
- UL and CSA Listed
- For indoor or outdoor applications
- Includes cover and gasket
The 1-1/2 in. Chase Conduit Nipple is a connector made of non-corrosive zinc alloy and suitable for indoor or outdoor use. With rigid coupling (sold separately) the connector terminates threaded conduit to factory or fields punched, cut or drilled holes in metal boxes. With a locknut (sold separately) the connector provides a short raceway between boxes.
- Use with rigid coupling to terminate threaded conduit to factory or field holes in metal enclosure
- Use with a locknut to provide a raceway between enclosures
- Zinc alloy is high strength and non-corrosive
- Designed for indoor or outdoor use
- UL and CSA listed for safety and peace of mind
Change rigid or IMC conduit direction with the 3/4 in. 90 degree Rigid Elbow. This galvanized steel elbow features a large radius to allow easy wire pulling. Usable indoors or outdoors.
- Enables a 90 degree directional turn in a run of rigid conduit
- Made of galvanized steel for corrosion resistance
- UL and CSA Listed
- Large radius for easy wire pulling
The 1-1/4 in. Rigid Compression Coupling joins and bonds threadless rigid or IMC conduit. The coupling is made of galvanized steel. It has both UL and CSA listings.
- Joins and bonds 2 lengths of threadless rigid or IMC conduit
- Made of corrosion-resistant galvanized steel
- UL and CSA listings
- Steel-plated compression ring positively bonds conduit to the connector
- Use indoors and in concrete-tight applications
- Secures Pipe To Box Or Panel
- Bulk
- For Rigid Conduit
The Halex 1 in. Rigid Conduit Locknuts (100-Pack) is ideal for securing threaded fittings to a steel outlet box. These locknuts are constructed of steel and are zinc-plated for rust resistance. Use indoor our outdoor.
- Secures rigid and IMC conduit to a metal enclosure
- Steel construction with zinc plating
- Compatible with galvanized rigid conduit
- Designed for indoor or outdoor use
The 1/2 in. Insulated Metallic Grounding Bushings (2-Pack) are designed to provide a means of grounding IMC and rigid conduit. It is made with die-cast zinc alloy for strength and features a thermoplastic lining that is rated at 150 degree F. The bushings are CSA and UL listed to help ensure safety.
- Provides a means of grounding IMC and rigid conduit
- For indoor applications only
- Die-cast zinc alloy construction
- Thermoplastic liner rated at 150 degree F
- Comes with a lug for bonding jumper to a neutral bus bar
- UL and CSA listed for safety
These 3/4 in. x 1/2 in. Conduit Reducing Washers (4-Pack) reduce the size of knockouts in metal enclosures such as steel outlet boxes. They feature raised flanges which enable positive seating in the knockouts. Requires 2 washers per knockout.
- Reduces the size of the knockout in a steel outlet box or other metal enclosure
- Galvanized steel resists corrosion
- Raised flanges allow for positive seating in the knockout
- Trade sizes marked on each washer
- UL listed
- Usable indoors or outdoors
Depend on 1-1/2 in. Rigid or IMC 2-Hole Conduit Straps (2-Pack) to help fix conduit to wood or masonry. Zinc-plated to resist corrosion, they are for indoor and outdoor use. Positively snaps onto the conduit.
- Secures rigid or IMC conduit to wood, masonry or a similar surface where greater load bearing is required
- Zinc-plated steel for corrosion resistance
- UL Listed
- For indoor or outdoor applications
The 3/4 in. Rigid or IMC Conduit Pull Elbow, with its removable cover, aids in wire pulling through a sharp bend. This elbow is made of die-cast, high-strength zinc alloy. This pull elbow meets UL and CSA requirements.
- Facilitates wire pulling through a sharp bend in a run of threaded rigid or IMC conduit
- Die-cast of high-strength zinc alloy for corrosion resistance
- UL and CSA Listed
- For indoor or outdoor applications
- Removable cover provides easy access to wiring
- Includes gasket
Secure rigid conduit to wood or masonry surfaces with this 1/2 in. Rigid 1-Hole Strap. It snaps onto the conduit when installed. It is usable for both indoor and outdoor applications.
- Secures rigid conduit to surfaces such as wood or masonry
- Corrosion-resistant galvanized steel
- UL Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
The 1-1/2 in. Compression Conduit Coupling is designed to join and bond 2 lengths of threadless IMC or rigid conduit. The coupling is crafted with galvanized steel for strength and is plated with steel for durability. It can be used indoors and in concrete-tight applications.
- Designed to join and bond threadless IMC or rigid conduit
- Use indoors and in concrete-tight applications
- Corrosion-resistant zinc-plated steel construction
- Steel-plated compression ring positively bonds conduit to the connector
- UL and CSA Listed for safety
The 1/2 in. Service Entrance Ell features a cover and gasket and is designed to gain access to the interior of a raceway for wire pulling, inspections and maintenance. This ell is a flush-mounted fitting. The Service Entrance Ell meets UL and CSA requirements.
- Designed to gain access to raceways
- Made of copper-free die-cast aluminum
- Compatible with rigid and IMC conduit
- Corrosion-resistant design
- UL and CSA listed
The 1-1/4 in. Chase Conduit Nipple is designed for use with a rigid coupling to terminate threaded conduit to metal electrical boxes. Used with a locknut, it can provide a short raceway between boxes. This chase nipple meets UL and CSA requirements.
- Terminates threaded conduit to metal electrical boxes
- Can be used with a locknut to create a short raceway between boxes
- Corrosion-resistant, high-strength zinc alloy
- UL and CSA listed
- Can be installed indoors or outdoors
Use a pair of 1 in. x 1/2 in. Rigid or IMC Conduit Reducing Washers (2-Pack) to reduce the knockout in a steel outlet box or similar enclosure. Each washer has a raised flange for positive seating. Corrosion resistant.
- Reduces the size of the knockout in a steel outlet box or other metal enclosure
- 2 washers required per knockout
- Galvanized steel is corrosion resistant
- UL and CSA listed
- Raised flanges allow for positive seating in the knockout
- For indoor or outdoor applications
Be up to code with the 1 in. Plastic Insulating Bushings (2-Pack). These nylon bushings are compatible with threaded rigid or IMC conduit. Use them inside or outdoors.
- Protects wires in threaded rigid or IMC conduit
- High-impact thermoplastic is flame retardant to 105C
- Use required by the NEC
- UL and CSA safety listings
- For indoor or outdoor applications
The 1-1/2 in. Insulated Grounding Bushings (2-Pack) are designed to insulate and ground threaded rigid or IMC conduit. They are made of zinc alloy with a thermoplastic, heat-tolerant liner. A lug is provided for bonding the jumper to a neutral bus bar.
- Insulate and ground threaded rigid or IMC conduit
- Made of zinc alloy with a thermoplastic liner
- UL and CSA listed
- Lug included for connecting the jumper to a neutral bus bar
- For indoor use only
The 1-1/4 in. Rigid Conduit Locknuts (50-Pack) is ideal for securing threaded fittings to a steel outlet box. These locknuts are constructed of steel and are zinc-plated for rust resistance. They can be used indoor our outdoor.
- Secures rigid and IMC conduit to a metal enclosure
- Steel construction with zinc plating
- Compatible with galvanized rigid conduit
- Designed for indoor or outdoor use
The 1/2 in. Conduit Pull Elbow has a gasket and removable cover to facilitate wire pulling and maintenance through a sharp bend in a run of threaded rigid or IMC conduit. It is die-cast of corrosion-resistant zinc alloy. This pull elbow meets UL and CSA requirements.
- Facilitates wire pulling and maintenance in rigid or IMC conduit
- Removable cover allows easy access
- Die-cast of high-strength zinc alloy
- UL and CSA Listed
- Corrosion resistant
Use this 2 in. Conduit Chase Nipple along with a rigid coupling to terminate a run of threaded conduit into an enclosure box. This zinc chase nipple is rated for both indoor and outdoor use. The Chase Nipple meets UL and CSA requirements.
- Use with a rigid coupling to terminate threaded conduit into a box
- Made of zinc
- UL and CSA listed
- Usable indoors or outdoors
- Corrosion resistant
The 1-1/4 in. Non-Metallic Reducer Bushing easily connects conduits of different sizes. Made of non-metallic PVC for durability. This bushing can be used with both Sch. 40 and Sch. 80 conduit.
- Connects conduits of different sizes
- Made of non-metallic PVC
- Compatible with sch. 40 and sch. 80 conduit
- UL and CSA listed
The 2 in. Rigid Conduit Locknuts (50-Pack) is ideal for securing threaded fittings to a steel outlet box. These locknuts are constructed of steel and are zinc-plated for rust resistance. Use indoor or outdoor.
- Secures rigid and IMC conduit to a metal enclosure
- Steel construction with zinc plating
- Compatible with galvanized rigid conduit
- Designed for indoor or outdoor use
The 1/2 in. Conduit Locknut (20-Pack) attaches rigid conduit and intermediate metal conduit (IMC) or other threaded fittings to steel outlet boxes and various metal enclosures. Cuts through protective coatings on enclosures for ground continuity. Exceeds UL 514B requirements.
- Secures conduit or other threading fittings to metal enclosures
- Zinc plated steel locknut is non-corrosive
- Compatible with rigid conduit and IMC
- Designed for use inside or outside of a box on fittings or on conduit
The 1 in. Insulated Grounding Bushings (2-Pack) are designed to ground the wires in threaded rigid or IMC conduits. The bushings are made of heat-tolerant thermoplastic and can be used in indoor or outdoor environments.
- Insulate wires in threaded rigid or IMC conduits
- Made from thermoplastic to withstand high-temperature environments
- Can be used indoors only
- UL and CSA listed
- Zinc Alloy
- 3/8" Greenfield (Flex)
- 14/2,12/3 Bx
The 2 in. 2-Hole Conduit Straps (2-Pack) are designed to secure conduit to wood, masonry or similar surfaces where greater load bearing is required. The corrosion-resistant straps are constructed of galvanized steel with a zinc-plated finish. Straps positively snap on conduit when installed.
- Use to secure conduit to wood, masonry or similar surfaces where greater load bearing is required
- Galvanized-steel construction
- Zinc-plated finish
- Corrosion resistant
- Compatible with galvanized-rigid conduit (GRC) and intermediate metal conduit (IMC)
- CSA and UL Listed
Use the 1 in. Rigid or IMC Conduit 1-Hole Strap when extra load bearing is needed to attach conduit to wood, masonry or a like surface. This zinc-plated strap snaps in place. Positively snaps onto the conduit.
- Secures rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL Listed
- For indoor or outdoor applications
Use 1/2 in. Rigid or IMC Compression Connectors (2-Pack) to connect rigid or IMC conduit to steel outlet boxes or other metal enclosures. A steel-plated compression ring positively bonds the conduit to the connector. This connector meets UL and CSA requirements.
- Connects and effectively bonds rigid or IMC conduit to a steel outlet box or other metal enclosure
- Zinc-plated steel resists corrosion
- UL and CSA Listed
- Steel-plated compression ring positively bonds conduit to the connector
- Use indoors and in concrete-tight applications
The 1 in. 90 degree Steel Conduit Elbow facilitates a 90 degree change of direction in a run of rigid or intermediate metal conduit (IMC). It features large radii to help with wire pulling. Large radii for easier wire pulling.
- Allows for a 90 degree change of direction in a run of rigid or IMC conduit
- Galvanized steel for corrosion resistance
- For indoor or outdoor applications
- UL and CSA safety listings
The 1 in. Compression Conduit Coupling is designed to join and bond 2 lengths of thread less IMC or rigid conduit. The coupling is crafted with corrosion-resistant zinc-plated steel for strength and is suitable for use indoors and in concrete-tight applications. It is CSA and UL listed to help guarantee safety.
- Designed to join and bond thread less IMC or rigid conduit
- Can be used indoors and in concrete-tight applications
- Corrosion-resistant zinc-plated steel construction
- Steel-plated compression ring positively bonds conduit to connector
- CSA and UL Listed for safety
The 1/2 in. Rigid or IMC Offset Conduit Nipple lets you offset the axis of a raceway by 3/4 in. Made of zinc alloy, it is strong and resists corrosion. This conduit nipple meets UL and CSA requirements.
- Provides a 3/4 in. offset when flexibility is needed to finish an installation using multiple boxes and enclosures
- Die-cast of high-strength zinc alloy for corrosion resistance
- UL and CSA Listed
- For indoor or outdoor applications
- Corrosion resistant
For bonding and joining lengths of threaded rigid conduit, use this 1-1/2 in. Rigid Conduit Coupling. It is made of galvanized steel. It is resistant to corrosion. Use indoors or outdoors.
- Joins and effectively bonds 2 lengths of threaded rigid conduit
- Corrosion-resistant galvanized steel
- UL Listed
- Usable indoors and outdoors
The 2 in. Rigid Conduit Coupling is crafted with galvanized steel to help ensure strength. Designed to join and bond threaded rigid or IMC conduit, the coupling can be used inside and outside. UL listed for safety.
- Joins and effectively bonds 2 threaded rigid or IMC conduits together
- Suitable for indoor and outdoor applications
- Galvanized steel construction
- Designed to resist corrosion for durability
- UL listed to help ensure safety
The 1-1/4 in. Conduit Locknuts (2-Pack) are designed to secure rigid and IMC conduit or various threaded fittings to steel outlet boxes or other metal enclosures. The zinc-plated locknuts are corrosion resistant. They provide a grounded connection.
- Made for connecting rigid and IMC conduit or threaded fittings to steel electrical enclosures
- Cast from corrosion-resistant galvanized steel
- For indoor or outdoor use
- Exceed UL 514B requirements
- Designed to cut through protective coatings on boxes to assure ground continuity
The 3/8 in. Black Button Plastic Push-in Connectors (25-Pack) are versatile high-quality electrical fittings designed for indoor use. These connectors offer a fast and easy way to install single or multiple cables and require only light finger pressure to snap into 1/2 in. knock outs. The cables insert without a struggle for a smooth installation, to remove simply use a twist of a screwdriver.
- Ideal for firm, dependable connections
- Suitable for use with a wide range of cables
- Use light finger pressure to snap into 1/2 in. knock outs suitable for use with a wide range of cables
- Quick and easy to install quick and easy to install
- Use light finger pressure to snap into 1/2 in. knock outs
- Quick and easy to install
Choose the 3/4 in. Rigid Conduit Coupling when you need to connect segments of threaded rigid or intermediate metal conduit (IMC). You can use this galvanized steel coupling indoors or outdoors. This coupling meets UL and CSA requirements.
- Joins 2 lengths of threaded rigid or IMC conduit
- Galvanized steel resists corrosion
- UL and CSA safety listings
- For indoor or outdoor applications