Searched for "39131700"
The 3/4 in. Type LB Threaded Aluminum Conduit Body is designed for gaining access to raceway interiors for wire pulling, splicing and maintenance. The conduit body is made with corrosion-resistant copper-free die-cast aluminum for strength and is suitable for use indoors and outdoors. It is CSA and UL listed to help guarantee safety.
- Designed to gain access to raceway interiors for wire pulling, splicing and maintenance
- For use with IMC and rigid conduit
- For indoor and outdoor applications
- Corrosion-resistant copper-free die-cast aluminum construction
- CSA and UL Listed for safety
Depend on 1-1/2 in. Rigid or IMC 2-Hole Conduit Straps (2-Pack) to help fix conduit to wood or masonry. Zinc-plated to resist corrosion, they are for indoor and outdoor use. Positively snaps onto the conduit.
- Secures rigid or IMC conduit to wood, masonry or a similar surface where greater load bearing is required
- Zinc-plated steel for corrosion resistance
- UL Listed
- For indoor or outdoor applications
The 1/2 in. Non-Metallic Type T Conduit Body is a non-threaded body hub made of PVC. The conduit body has a textured lid and a foam in-place gasket. This fitting is compatible with rigid non-metallic conduit (RNC) and can be used for indoor and outdoor applications.
- For indoor and outdoor use
- Made of non-corrosive, non-conductive PVC
- Compatible with RNC conduit
- Maximum working temperature of 120°F
- UL and CSA listed
The 2 in. Threaded Aluminum Conduit Body is designed to gain access to the interior of a raceway for wire-pulling, inspections and maintenance. It is made of die-cast aluminum and has a cover for easy access. This conduit body meets UL and CSA requirements.
- Designed for easy access to the interior of raceways
- Made of copper-free die-cast aluminum
- Use with rigid or IMC conduit
- UL and CSA Listed
- Corrosion resistant
Use these 1 in. Conduit Locknuts (2-Pack) to secure conduit to steel outlet boxes and other metal enclosures. They are designed to cut through protective coatings to ensure ground continuity. Designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Secures conduit to metal enclosures such as steel outlet boxes
- Zinc-plated steel for corrosion resistance
- Usable both inside and outside of a box
- Cuts through protective coatings on boxes and enclosures ensuring ground continuity
The 2 in. Plastic Insulated Bushings (4-Pack) are designed to protect wires in threaded rigid or IMC conduits. They are made of heat-tolerant thermoplastic and can be used in indoor or outdoor environments. These bushings meet UL and CSA requirements.
- Protect wires in threaded rigid or IMC conduits
- Made from thermoplastic to withstand high-temperature environments
- Can be used indoors or outdoors
- UL and CSA listed
The 1/2 in. Conduit Locknut (20-Pack) attaches rigid conduit and intermediate metal conduit (IMC) or other threaded fittings to steel outlet boxes and various metal enclosures. Cuts through protective coatings on enclosures for ground continuity. Exceeds UL 514B requirements.
- Secures conduit or other threading fittings to metal enclosures
- Zinc plated steel locknut is non-corrosive
- Compatible with rigid conduit and IMC
- Designed for use inside or outside of a box on fittings or on conduit
The 2 in. 2-Hole Conduit Straps (2-Pack) are designed to secure conduit to wood, masonry or similar surfaces where greater load bearing is required. The corrosion-resistant straps are constructed of galvanized steel with a zinc-plated finish. Straps positively snap on conduit when installed.
- Use to secure conduit to wood, masonry or similar surfaces where greater load bearing is required
- Galvanized-steel construction
- Zinc-plated finish
- Corrosion resistant
- Compatible with galvanized-rigid conduit (GRC) and intermediate metal conduit (IMC)
- CSA and UL Listed
The 1 in. Threaded Aluminum Conduit Body is designed to gain easy access to the interior of a raceway for wire-pulling, inspections and maintenance. It is made of die-cast aluminum and has a handy removable cover. This conduit body meets UL and CSA requirements.
- Designed for easy access to the interior of raceways
- Made of copper-free die-cast aluminum
- Use with rigid or IMC conduit
- UL and CSA Listed
- Can be used in interior or exterior applications
The 1/2 in. Rigid or IMC Offset Conduit Nipple lets you offset the axis of a raceway by 3/4 in. Made of zinc alloy, it is strong and resists corrosion. This conduit nipple meets UL and CSA requirements.
- Provides a 3/4 in. offset when flexibility is needed to finish an installation using multiple boxes and enclosures
- Die-cast of high-strength zinc alloy for corrosion resistance
- UL and CSA Listed
- For indoor or outdoor applications
- Corrosion resistant
This 3/4 in. 1-Hole Conduit Straps (4-Pack) are designed for high load bearing and are handy for securing rigid or IMC conduit to a variety of work surfaces. The corrosion-resistant steel snaps onto the conduit to keep it in place. These conduit straps meet UL and CSA requirements.
- Designed for securing heavy-duty rigid or IMC conduit to a variety of work surfaces
- For indoor or outdoor applications
- Made of corrosion-resistant galvanized steel
- Snaps onto the conduit to keep it in place
- UL and CSA Listed
- Installs quickly and easily
Use this 2 in. Conduit Chase Nipple along with a rigid coupling to terminate a run of threaded conduit into an enclosure box. This zinc chase nipple is rated for both indoor and outdoor use. The Chase Nipple meets UL and CSA requirements.
- Use with a rigid coupling to terminate threaded conduit into a box
- Made of zinc
- UL and CSA listed
- Usable indoors or outdoors
- Corrosion resistant
The 1-1/2 in. Plastic Insulating Bushings (4-Pack) are for use on threaded IMC or rigid conduit to protect the wires. The bushings are made of high-impact, fire-retardant thermoplastic. These bushings meet UL and CSA requirements.
- Use on threaded IMC or rigid conduit to protect the wires
- Constructed of high-impact thermoplastic
- Flame retardant to 105Û£ degree C
- Compatible with threaded GRC and IMC
- For indoor or outdoor use
- CSA and UL listed
The 2 in. Conduit Locknuts (2-Pack) are designed to secure rigid and IMC conduit or various threaded fittings to steel outlet boxes or other metal enclosures. They provide a grounded connection and are suitable for indoor applications. Designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Secure rigid and IMC conduit or threaded fittings to metal electrical enclosures
- Made of galvanized steel
- Exceed UL 514B requirements
- Cut through protective coatings on boxes to assure ground continuity
Use the 3/4 in. Conduit Locknuts (4-Pack) to secure RIGID and IMC conduit and various threaded fittings to steel outlet boxes and other metal enclosures. Zinc plated for corrosion resistance. These conduit locknuts can be used for outdoor applications.
- Indoor and outdoor use
- Zinc-plated steel for corrosion resistance
- Exceeds UL 514B safety requirements
- Designed to cut through protective coatings on boxes and enclosures to assure ground continuity
Where load bearing is required, use these 1/2 in. 1-Hole Conduit Straps (100-Pack) to secure IMC and rigid conduit to surfaces such as wood and masonry. They are made of steel and electro-plated with zinc for corrosion resistance. These conduit straps may be used indoor or outdoor.
- Secures IMC and rigid conduit to surfaces such as wood or masonry where greater load bearing is required
- Zinc-plated steel for corrosion resistance
- UL and CSA Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
Use the 1 in. Rigid or IMC Conduit 1-Hole Strap when extra load bearing is needed to attach conduit to wood, masonry or a like surface. This zinc-plated strap snaps in place. Positively snaps onto the conduit.
- Secures rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL Listed
- For indoor or outdoor applications
The 2 in. 90 degree Conduit Elbow is intended for use to make a 90 degree directional change when installing rigid or intermediate metal conduit (IMC) in indoor or outdoor applications. Large radius for easy wire pulling. CSA- and UL Listed.
- Use to make a 90 degree directional change when installing rigid or IMC conduit
- Galvanized-steel construction
- Corrosion resistant
- For indoor or outdoor use
The Halex 1/2 in. Rigid Conduit Locknuts (200-Pack) is ideal for securing threaded fittings to a steel outlet box. These locknuts are constructed of steel and are zinc-plated for rust resistance. The locknuts can be used indoor or outdoor.
- Secures rigid and IMC conduit to a metal enclosure
- Steel construction with zinc plating
- Compatible with galvanized rigid conduit
- Designed for indoor or outdoor use
These 3/4 in. x 1/2 in. Conduit Reducing Washers (4-Pack) reduce the size of knockouts in metal enclosures such as steel outlet boxes. They feature raised flanges which enable positive seating in the knockouts. Requires 2 washers per knockout.
- Reduces the size of the knockout in a steel outlet box or other metal enclosure
- Galvanized steel resists corrosion
- Raised flanges allow for positive seating in the knockout
- Trade sizes marked on each washer
- UL listed
- Usable indoors or outdoors
Use a pair of 1 in. x 1/2 in. Rigid or IMC Conduit Reducing Washers (2-Pack) to reduce the knockout in a steel outlet box or similar enclosure. Each washer has a raised flange for positive seating. Corrosion resistant.
- Reduces the size of the knockout in a steel outlet box or other metal enclosure
- 2 washers required per knockout
- Galvanized steel is corrosion resistant
- UL and CSA listed
- Raised flanges allow for positive seating in the knockout
- For indoor or outdoor applications
The 1-1/4 in. Threaded Conduit Body is designed to gain access to the interior of a raceway for wire pulling, inspections and maintenance. The elbow has a cover and gasket for easy access. It is suitable for rigid or IMC cable.
- Designed for easy access to the interior of raceways
- Made of copper-free die-cast aluminum
- Use with rigid or IMC conduit
- UL and CSA listed
- Corrosion resistant
The 1/2 in. Type LB Threaded Aluminum Conduit Body is designed to gain access to the interior of a raceway for wire pulling, maintenance and splicing. It can be used with rigid and IMC conduit and is made with corrosion-resistant, copper-free die-cast aluminum. The conduit body is UL and CSA listed for safety.
- Designed to gain access to raceway interiors for wire pulling, splicing, and maintenance
- For use with rigid and IMC conduit
- For indoor and outdoor applications
- Corrosion-resistant, copper-free die-cast aluminum
- UL and CSA Listed to help ensure safety
- Use To Cover Exposed Holes In Steel Outlet Boxes and Other Metal Enclosures
- Indoor Use Only
- 10 Per Bag
