Searched for "39131700"
The 1/2 in. Non-Metallic Type T Conduit Body is a non-threaded body hub made of PVC. The conduit body has a textured lid and a foam in-place gasket. This fitting is compatible with rigid non-metallic conduit (RNC) and can be used for indoor and outdoor applications.
- For indoor and outdoor use
- Made of non-corrosive, non-conductive PVC
- Compatible with RNC conduit
- Maximum working temperature of 120°F
- UL and CSA listed
The 3/4 in. Threadless Compression Conduit Connectors (2-Pack) are designed to connect and effectively bond rigid conduit and intermediate metal conduit (IMC) to metal enclosures. Made of zinc-plated steel. These connectors meet UL and CSA requirements.
- Connects and positively bonds conduit to a steel outlet box or other metal enclosure
- Zinc-plated steel construction resists corrosion
- Compatible with rigid conduit and intermediate metal conduit (IMC)
- UL and CSA listed for safety
- Designed for indoor use and in concrete tight applications
The 1-1/4 in. Conduit Locknuts (2-Pack) are designed to secure rigid and IMC conduit or various threaded fittings to steel outlet boxes or other metal enclosures. The zinc-plated locknuts are corrosion resistant. They provide a grounded connection.
- Made for connecting rigid and IMC conduit or threaded fittings to steel electrical enclosures
- Cast from corrosion-resistant galvanized steel
- For indoor or outdoor use
- Exceed UL 514B requirements
- Designed to cut through protective coatings on boxes to assure ground continuity
Use this 1 in. Chase Conduit Nipple to connect threaded conduit to an enclosure knockout. With a locknut (not included), this fitting can be used as a short raceway between boxes or enclosures. This conduit nipple meets UL and CSA requirements.
- Connects threaded conduit to a metal enclosure knockout
- Use with a locknut (not included) as a raceway between two enclosures
- Made of high-strength, corrosion-resistant zinc alloy
- UL and CSA listings
- Usable indoors or outdoors
Use these 1 in. Conduit Locknuts (2-Pack) to secure conduit to steel outlet boxes and other metal enclosures. They are designed to cut through protective coatings to ensure ground continuity. Designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Secures conduit to metal enclosures such as steel outlet boxes
- Zinc-plated steel for corrosion resistance
- Usable both inside and outside of a box
- Cuts through protective coatings on boxes and enclosures ensuring ground continuity
The 3/4 in. Type LB Threaded Aluminum Conduit Body is designed for gaining access to raceway interiors for wire pulling, splicing and maintenance. The conduit body is made with corrosion-resistant copper-free die-cast aluminum for strength and is suitable for use indoors and outdoors. It is CSA and UL listed to help guarantee safety.
- Designed to gain access to raceway interiors for wire pulling, splicing and maintenance
- For use with IMC and rigid conduit
- For indoor and outdoor applications
- Corrosion-resistant copper-free die-cast aluminum construction
- CSA and UL Listed for safety
The 1 in. Insulated Grounding Bushings (2-Pack) are designed to ground the wires in threaded rigid or IMC conduits. The bushings are made of heat-tolerant thermoplastic and can be used in indoor or outdoor environments.
- Insulate wires in threaded rigid or IMC conduits
- Made from thermoplastic to withstand high-temperature environments
- Can be used indoors only
- UL and CSA listed
Use this 2 in. Conduit Chase Nipple along with a rigid coupling to terminate a run of threaded conduit into an enclosure box. This zinc chase nipple is rated for both indoor and outdoor use. The Chase Nipple meets UL and CSA requirements.
- Use with a rigid coupling to terminate threaded conduit into a box
- Made of zinc
- UL and CSA listed
- Usable indoors or outdoors
- Corrosion resistant
The 1 in. Threaded Aluminum Conduit Body is designed to gain easy access to the interior of a raceway for wire-pulling, inspections and maintenance. It is made of die-cast aluminum and has a handy removable cover. This conduit body meets UL and CSA requirements.
- Designed for easy access to the interior of raceways
- Made of copper-free die-cast aluminum
- Use with rigid or IMC conduit
- UL and CSA Listed
- Can be used in interior or exterior applications
The 1-1/2 in. Chase Conduit Nipple is a connector made of non-corrosive zinc alloy and suitable for indoor or outdoor use. With rigid coupling (sold separately) the connector terminates threaded conduit to factory or fields punched, cut or drilled holes in metal boxes. With a locknut (sold separately) the connector provides a short raceway between boxes.
- Use with rigid coupling to terminate threaded conduit to factory or field holes in metal enclosure
- Use with a locknut to provide a raceway between enclosures
- Zinc alloy is high strength and non-corrosive
- Designed for indoor or outdoor use
- UL and CSA listed for safety and peace of mind
The 3/4 in. 2-Hole Conduit Straps (10-Pack) are designed to secure EMT conduit to wood, masonry or similar surfaces. The straps have a high load-bearing capacity and snap onto the conduit to hold it securely in place. Corrosion resistant.
- Heavy-duty conduit straps for RIGID/IMC conduit
- Made of corrosion-resistant galvanized steel
- Can be used for indoor and outdoor applications
- UL Listed
Use the 3/4 in. Conduit Locknuts (4-Pack) to secure RIGID and IMC conduit and various threaded fittings to steel outlet boxes and other metal enclosures. Zinc plated for corrosion resistance. These conduit locknuts can be used for outdoor applications.
- Indoor and outdoor use
- Zinc-plated steel for corrosion resistance
- Exceeds UL 514B safety requirements
- Designed to cut through protective coatings on boxes and enclosures to assure ground continuity
The 2 in. Conduit Locknuts (2-Pack) are designed to secure rigid and IMC conduit or various threaded fittings to steel outlet boxes or other metal enclosures. They provide a grounded connection and are suitable for indoor applications. Designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Secure rigid and IMC conduit or threaded fittings to metal electrical enclosures
- Made of galvanized steel
- Exceed UL 514B requirements
- Cut through protective coatings on boxes to assure ground continuity
Where load bearing is required, use these 1/2 in. 1-Hole Conduit Straps (100-Pack) to secure IMC and rigid conduit to surfaces such as wood and masonry. They are made of steel and electro-plated with zinc for corrosion resistance. These conduit straps may be used indoor or outdoor.
- Secures IMC and rigid conduit to surfaces such as wood or masonry where greater load bearing is required
- Zinc-plated steel for corrosion resistance
- UL and CSA Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
The 2 in. 90 degree Conduit Elbow is intended for use to make a 90 degree directional change when installing rigid or intermediate metal conduit (IMC) in indoor or outdoor applications. Large radius for easy wire pulling. CSA- and UL Listed.
- Use to make a 90 degree directional change when installing rigid or IMC conduit
- Galvanized-steel construction
- Corrosion resistant
- For indoor or outdoor use
The Halex 1/2 in. Rigid Conduit Locknuts (200-Pack) is ideal for securing threaded fittings to a steel outlet box. These locknuts are constructed of steel and are zinc-plated for rust resistance. The locknuts can be used indoor or outdoor.
- Secures rigid and IMC conduit to a metal enclosure
- Steel construction with zinc plating
- Compatible with galvanized rigid conduit
- Designed for indoor or outdoor use
For bonding and joining lengths of threaded rigid conduit, use this 1-1/2 in. Rigid Conduit Coupling. It is made of galvanized steel. It is resistant to corrosion. Use indoors or outdoors.
- Joins and effectively bonds 2 lengths of threaded rigid conduit
- Corrosion-resistant galvanized steel
- UL Listed
- Usable indoors and outdoors
Arlington's smallest insulated bushing. They protect cables from abrasion by the conduit. Often conduit is used to protect cables where damage could occur in a house or building.
- Press fit
- Holds firmly in place while pulling cables
- Some examples of use: cable tv, computer datelines, telephone/modem
- Trade size: 1/2 in.
- Dimensions: .531 in. x .84 in.
The 2 in. Insulated Metallic Grounding Bushing provides a means of grounding threaded rigid conduit or intermediate metal conduit (IMC). The zinc alloy bushing with thermoplastic liner is non-corrosive. It is suitable for use indoors only.
- Grounds threaded conduit
- Zinc alloy is high strength and non-corrosive
- Thermoplastic liner is rated at 150 degree C
- Compatible with rigid conduit or IMC
- Designed for indoor use
- UL and CSA listed for safety and peace of mind
- Lug provided for bonding jumper to a neutral bus bar
- Locknut (sold separately) use required
The 2 in. Threadless Compression Conduit Connector is designed to connect and bond IMC and rigid conduit to steel outlet boxes and other metal enclosures. It is made with corrosion-resistant zinc-plated steel for strength and features a steel-plated compression ring that positively bonds the conduit to the connector. CSA and UL listed for safety.
- Connects and bonds IMC and rigid conduit to steel outlet boxes and other metal enclosures
- May be used indoors and in concrete-tight applications
- Corrosion-resistant zinc-plated steel construction
- Steel-plated compression ring positively bonds conduit to the connector
The 1-1/4 in. Threaded Conduit Body is designed to gain access to the interior of a raceway for wire pulling, inspections and maintenance. The elbow has a cover and gasket for easy access. It is suitable for rigid or IMC cable.
- Designed for easy access to the interior of raceways
- Made of copper-free die-cast aluminum
- Use with rigid or IMC conduit
- UL and CSA listed
- Corrosion resistant
When flexibility is needed, use the 1-1/4 in. Offset Rigid Conduit Nipple. It offsets a conduit by 3/4 in. and is made of high-strength zinc alloy for corrosion resistance. This conduit nipple meets UL and CSA requirements.
- Offsets the axis of a raceway by 3/4 in.
- High-strength, corrosion-resistant zinc alloy construction
- UL and CSA listed
- For indoor and outdoor use
- Corrosion resistant
To connect threaded rigid or intermediate metal conduit (IMC) to holes in metal boxes or enclosures, use the 1/2 in. Chase Conduit Nipples (2-Pack). The nipples can also be used along with locknuts to create short raceways between boxes or enclosures. These Nipples meet UL and CSA requirements.
- Terminate threaded rigid or IMC conduit to punched, cut or drilled holes in metal boxes or enclosures
- Use with locknuts to provide short raceways between boxes or enclosures
- High-strength die-cast zinc alloy for corrosion resistance
- UL and CSA safety listings
- For indoor or outdoor applications
Featured product is a rigid one hole strap. It is used to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. It can be used indoors or outdoors.
- Indoors or outdoors
- Steel, zinc electro plate
- 1 in.
- UL