Rigid Conduit Systems
The 1 in. x 3/4 in. Reducing Bushing is die cast of durable zinc alloy and suitable for indoor use only. The bushing is designed to reduce the entry size of a run of threaded rigid conduit or intermediate metal conduit (IMC). UL and CSA listed for safety and peace of mind.
- Reduces the run entry size of threaded rigid conduit and IMC
- Zinc alloy is high strength and non-corrosive
- Compatible with rigid conduit and IMC
- Designed for indoor use only
Use the 1 in. Rigid or IMC Conduit 1-Hole Strap when extra load bearing is needed to attach conduit to wood, masonry or a like surface. This zinc-plated strap snaps in place. Positively snaps onto the conduit.
- Secures rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL Listed
- For indoor or outdoor applications
The 3/4 in. x 1/2 in. Reducer Bushing is intended to reduce the entry size of a run of threaded conduit. The bushing is CSA- and UL listed for use with Rigid or intermediate metal conduit (IMC). Used for indoor applications.
- Use to reduce the entry size of a run of threaded conduit
- Die-cast-zinc alloy is high strength
- Corrosion resistant
- Compatible with rigid conduit and IMC
- For indoor use
- CSA- and UL Listed
The 3/4 in. Offset Conduit Nipple is designed to provide an offset when flexibility is needed to finish off installations using multiple boxes and enclosures. It is made of corrosion-resistant zinc alloy and designed for use with rigid or IMC conduit. This conduit nipple meets UL and CSA requirements.
- Provides flexibility in multiple-box installations
- Offsets the axis of raceways
- Corrosion-resistant, high-strength zinc alloy
- Can be installed indoors or outdoors
- UL and CSA listed
The 2 in. Conduit Locknuts (2-Pack) are designed to secure rigid and IMC conduit or various threaded fittings to steel outlet boxes or other metal enclosures. They provide a grounded connection and are suitable for indoor applications. Designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Secure rigid and IMC conduit or threaded fittings to metal electrical enclosures
- Made of galvanized steel
- Exceed UL 514B requirements
- Cut through protective coatings on boxes to assure ground continuity
The 1/2 in. Rigid or IMC Offset Conduit Nipple lets you offset the axis of a raceway by 3/4 in. Made of zinc alloy, it is strong and resists corrosion. This conduit nipple meets UL and CSA requirements.
- Provides a 3/4 in. offset when flexibility is needed to finish an installation using multiple boxes and enclosures
- Die-cast of high-strength zinc alloy for corrosion resistance
- UL and CSA Listed
- For indoor or outdoor applications
- Corrosion resistant
To connect threaded rigid or intermediate metal conduit (IMC) to holes in metal boxes or enclosures, use the 1/2 in. Chase Conduit Nipples (2-Pack). The nipples can also be used along with locknuts to create short raceways between boxes or enclosures. These Nipples meet UL and CSA requirements.
- Terminate threaded rigid or IMC conduit to punched, cut or drilled holes in metal boxes or enclosures
- Use with locknuts to provide short raceways between boxes or enclosures
- High-strength die-cast zinc alloy for corrosion resistance
- UL and CSA safety listings
- For indoor or outdoor applications
The 1-1/4 in. Plastic Insulated Bushing is designed to protect wires in threaded rigid or IMC conduits. It is made of heat-tolerant thermoplastic and can be used in indoor or outdoor environments. This bushing meets UL and CSA requirements.
- Protects wires in threaded rigid or IMC conduits
- Made of high-impact thermoplastic to withstand high-temperature environments
- Can be used indoors or outdoors
- UL and CSA Listed
The 1/2 in. Conduit Locknut (20-Pack) attaches rigid conduit and intermediate metal conduit (IMC) or other threaded fittings to steel outlet boxes and various metal enclosures. Cuts through protective coatings on enclosures for ground continuity. Exceeds UL 514B requirements.
- Secures conduit or other threading fittings to metal enclosures
- Zinc plated steel locknut is non-corrosive
- Compatible with rigid conduit and IMC
- Designed for use inside or outside of a box on fittings or on conduit
Use the 3/4 in. Conduit Locknuts (4-Pack) to secure RIGID and IMC conduit and various threaded fittings to steel outlet boxes and other metal enclosures. Zinc plated for corrosion resistance. These conduit locknuts can be used for outdoor applications.
- Indoor and outdoor use
- Zinc-plated steel for corrosion resistance
- Exceeds UL 514B safety requirements
- Designed to cut through protective coatings on boxes and enclosures to assure ground continuity
These 3/4 in. x 1/2 in. Conduit Reducing Washers (4-Pack) reduce the size of knockouts in metal enclosures such as steel outlet boxes. They feature raised flanges which enable positive seating in the knockouts. Requires 2 washers per knockout.
- Reduces the size of the knockout in a steel outlet box or other metal enclosure
- Galvanized steel resists corrosion
- Raised flanges allow for positive seating in the knockout
- Trade sizes marked on each washer
- UL listed
- Usable indoors or outdoors
The 2 in. Plastic Insulated Bushings (4-Pack) are designed to protect wires in threaded rigid or IMC conduits. They are made of heat-tolerant thermoplastic and can be used in indoor or outdoor environments. These bushings meet UL and CSA requirements.
- Protect wires in threaded rigid or IMC conduits
- Made from thermoplastic to withstand high-temperature environments
- Can be used indoors or outdoors
- UL and CSA listed
Where load bearing is required, use these 1/2 in. 1-Hole Conduit Straps (100-Pack) to secure IMC and rigid conduit to surfaces such as wood and masonry. They are made of steel and electro-plated with zinc for corrosion resistance. These conduit straps may be used indoor or outdoor.
- Secures IMC and rigid conduit to surfaces such as wood or masonry where greater load bearing is required
- Zinc-plated steel for corrosion resistance
- UL and CSA Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
The 1-1/4 in. Conduit Locknuts (2-Pack) are designed to secure rigid and IMC conduit or various threaded fittings to steel outlet boxes or other metal enclosures. The zinc-plated locknuts are corrosion resistant. They provide a grounded connection.
- Made for connecting rigid and IMC conduit or threaded fittings to steel electrical enclosures
- Cast from corrosion-resistant galvanized steel
- For indoor or outdoor use
- Exceed UL 514B requirements
- Designed to cut through protective coatings on boxes to assure ground continuity
1 in. x 3/4 in. Rigid or IMC Conduit Reducing Washers (2-Pack) effectively reduce the size of the knockout in a steel outlet box or other metal enclosure. Each knockout requires 2 of these galvanized washers. Trade sizes are clearly marked on each washer.
- Reduce the size of the knockout in a steel outlet box or other metal enclosure
- Use 1 washer inside the enclosure opening and 1 outside
- Galvanized steel
- UL listed
- Raised flanges allow for positive seating in the knockout
The 3/4 in. Type LB Threaded Aluminum Conduit Body is designed for gaining access to raceway interiors for wire pulling, splicing and maintenance. The conduit body is made with corrosion-resistant copper-free die-cast aluminum for strength and is suitable for use indoors and outdoors. It is CSA and UL listed to help guarantee safety.
- Designed to gain access to raceway interiors for wire pulling, splicing and maintenance
- For use with IMC and rigid conduit
- For indoor and outdoor applications
- Corrosion-resistant copper-free die-cast aluminum construction
- CSA and UL Listed for safety
The 3/4 in. Rigid Chase Conduit Nipple, used with a rigid coupling, connects conduit to a hole in a metal box or enclosure. This zinc alloy nipple also provides a short raceway between boxes or enclosures when used with a locknut. This conduit nipple meets UL and CSA requirements.
- Used with a rigid coupling to terminate threaded conduit to a hole in a metal box or enclosure
- Use with a locknut to provide a short raceway between boxes or enclosures
- Die-cast high-strength zinc alloy
- UL and CSA Listed
- For indoor or outdoor applications
The 1/2 in. Rigid Conduit Coupling can be used inside and outside and is crafted with galvanized steel to help ensure strength. The coupling is designed to join and bond rigid or IMC conduit together. It is UL listed for safety.
- Joins and effectively bonds 2 threaded rigid or IMC conduit runs together
- Suitable for indoor and outdoor applications
- Galvanized steel construction
- Designed to resist corrosion for durability
- UL listed for safety
Be up to code with the 1 in. Plastic Insulating Bushings (2-Pack). These nylon bushings are compatible with threaded rigid or IMC conduit. Use them inside or outdoors.
- Protects wires in threaded rigid or IMC conduit
- High-impact thermoplastic is flame retardant to 105C
- Use required by the NEC
- UL and CSA safety listings
- For indoor or outdoor applications
3/4 in. 1-Hole Rigid Straps (100-Pack) secure IMC or rigid conduit on surfaces such as wood and masonry. They are made of steel and have zinc plating for corrosion resistance. The straps may be used indoors or outdoors.
- Secures IMC or rigid conduit to surfaces such as wood or masonry where greater load bearing is required
- Zinc-plated steel for corrosion resistance
- UL and CSA Listed
- Positively snaps on conduit when installed
- Usable indoors and outdoors
The 1/2 in. Insulated Metallic Grounding Bushings (2-Pack) are designed to provide a means of grounding IMC and rigid conduit. It is made with die-cast zinc alloy for strength and features a thermoplastic lining that is rated at 150 degree F. The bushings are CSA and UL listed to help ensure safety.
- Provides a means of grounding IMC and rigid conduit
- For indoor applications only
- Die-cast zinc alloy construction
- Thermoplastic liner rated at 150 degree F
- Comes with a lug for bonding jumper to a neutral bus bar
- UL and CSA listed for safety
Safely ground a run of conduit with 3/4 in. Insulated Rigid or IMC Grounding Bushings (2-Pack). These zinc alloy bushings feature a thermoplastic liner.
- Grounds rigid or IMC conduit
- Die-cast of high-strength zinc alloy
- UL and CSA Listed
- Thermoplastic liner rated at 150 degree F
- For indoor applications only
The 2 in. 2-Hole Conduit Straps (2-Pack) are designed to secure conduit to wood, masonry or similar surfaces where greater load bearing is required. The corrosion-resistant straps are constructed of galvanized steel with a zinc-plated finish. Straps positively snap on conduit when installed.
- Use to secure conduit to wood, masonry or similar surfaces where greater load bearing is required
- Galvanized-steel construction
- Zinc-plated finish
- Corrosion resistant
- Compatible with galvanized-rigid conduit (GRC) and intermediate metal conduit (IMC)
- CSA and UL Listed
The 1-1/2 in. Plastic Insulating Bushings (4-Pack) are for use on threaded IMC or rigid conduit to protect the wires. The bushings are made of high-impact, fire-retardant thermoplastic. These bushings meet UL and CSA requirements.
- Use on threaded IMC or rigid conduit to protect the wires
- Constructed of high-impact thermoplastic
- Flame retardant to 105Û£ degree C
- Compatible with threaded GRC and IMC
- For indoor or outdoor use
- CSA and UL listed
Use these 1 in. Conduit Locknuts (2-Pack) to secure conduit to steel outlet boxes and other metal enclosures. They are designed to cut through protective coatings to ensure ground continuity. Designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Secures conduit to metal enclosures such as steel outlet boxes
- Zinc-plated steel for corrosion resistance
- Usable both inside and outside of a box
- Cuts through protective coatings on boxes and enclosures ensuring ground continuity
Use this 1 in. Chase Conduit Nipple to connect threaded conduit to an enclosure knockout. With a locknut (not included), this fitting can be used as a short raceway between boxes or enclosures. This conduit nipple meets UL and CSA requirements.
- Connects threaded conduit to a metal enclosure knockout
- Use with a locknut (not included) as a raceway between two enclosures
- Made of high-strength, corrosion-resistant zinc alloy
- UL and CSA listings
- Usable indoors or outdoors
The 1/2 in. Type LB Threaded Aluminum Conduit Body is designed to gain access to the interior of a raceway for wire pulling, maintenance and splicing. It can be used with rigid and IMC conduit and is made with corrosion-resistant, copper-free die-cast aluminum. The conduit body is UL and CSA listed for safety.
- Designed to gain access to raceway interiors for wire pulling, splicing, and maintenance
- For use with rigid and IMC conduit
- For indoor and outdoor applications
- Corrosion-resistant, copper-free die-cast aluminum
- UL and CSA Listed to help ensure safety
The 2 in. Offset Conduit Nipple is designed to provide an offset when flexibility is needed to finish off installations using multiple boxes and enclosures. It is made of corrosion-resistant zinc alloy and designed for use with rigid or IMC conduit. This Conduit Nipple meets UL and CSA requirements.
- Provides flexibility in multiple-box installations
- Offsets the axis of raceways
- Corrosion-resistant, high-strength zinc alloy
- Can be installed indoors or outdoors
- UL and CSA Listed
The 2 in. Insulated Metallic Grounding Bushing provides a means of grounding threaded rigid conduit or intermediate metal conduit (IMC). The zinc alloy bushing with thermoplastic liner is non-corrosive. It is suitable for use indoors only.
- Grounds threaded conduit
- Zinc alloy is high strength and non-corrosive
- Thermoplastic liner is rated at 150 degree C
- Compatible with rigid conduit or IMC
- Designed for indoor use
- UL and CSA listed for safety and peace of mind
- Lug provided for bonding jumper to a neutral bus bar
- Locknut (sold separately) use required
The 1-1/4 in. 2-Hole Conduit Straps (4-Pack) are designed to secure rigid or IMC conduit to wood, masonry or similar surfaces. The straps have a high load-bearing capacity and snap onto the conduit to hold it securely in place. Corrosion resistant.
- Heavy-duty conduit straps for securing rigid or IMC conduit to work surfaces
- Made of corrosion-resistant galvanized steel
- Can be used for indoor or outdoor applications
- UL Listed
The 1-1/2 in. Conduit Locknut (2-Pack) secures rigid conduit and intermediate metal conduit (IMC) or various threaded fittings to steel outlet boxes or other metal enclosures. Cuts through protective coatings on enclosures for ground continuity. Exceeds UL 514B requirements.
- Secures conduit or other threaded fittings to metal enclosures
- Zinc plated steel locknut is non-corrosive
- Compatible with rigid conduit and IMC
- Designed for use inside or outside of a box on fittings or on conduit
Use a pair of 1 in. x 1/2 in. Rigid or IMC Conduit Reducing Washers (2-Pack) to reduce the knockout in a steel outlet box or similar enclosure. Each washer has a raised flange for positive seating. Corrosion resistant.
- Reduces the size of the knockout in a steel outlet box or other metal enclosure
- 2 washers required per knockout
- Galvanized steel is corrosion resistant
- UL and CSA listed
- Raised flanges allow for positive seating in the knockout
- For indoor or outdoor applications
The 1-1/4 in. Threaded Conduit Body is designed to gain access to the interior of a raceway for wire pulling, inspections and maintenance. The elbow has a cover and gasket for easy access. It is suitable for rigid or IMC cable.
- Designed for easy access to the interior of raceways
- Made of copper-free die-cast aluminum
- Use with rigid or IMC conduit
- UL and CSA listed
- Corrosion resistant
The 1 in. Threaded Aluminum Conduit Body is designed to gain easy access to the interior of a raceway for wire-pulling, inspections and maintenance. It is made of die-cast aluminum and has a handy removable cover. This conduit body meets UL and CSA requirements.
- Designed for easy access to the interior of raceways
- Made of copper-free die-cast aluminum
- Use with rigid or IMC conduit
- UL and CSA Listed
- Can be used in interior or exterior applications
To join 2 sections of rigid or intermediate metal conduit (IMC), employ the 3/4 in. Compression Coupling. It is for indoor and concrete-tight installation. It resists corrosion.
- Connects 2 lengths of threadless rigid or IMC conduit
- Zinc-plated steel for corrosion resistance
- UL and CSA safety listings
- For indoor and concrete-tight applications
- Steel-plated compression ring positively bonds conduit to the connector
Change rigid or IMC conduit direction with the 3/4 in. 90 degree Rigid Elbow. This galvanized steel elbow features a large radius to allow easy wire pulling. Usable indoors or outdoors.
- Enables a 90 degree directional turn in a run of rigid conduit
- Made of galvanized steel for corrosion resistance
- UL and CSA Listed
- Large radius for easy wire pulling
The 2 in. Rigid Conduit Coupling is crafted with galvanized steel to help ensure strength. Designed to join and bond threaded rigid or IMC conduit, the coupling can be used inside and outside. UL listed for safety.
- Joins and effectively bonds 2 threaded rigid or IMC conduits together
- Suitable for indoor and outdoor applications
- Galvanized steel construction
- Designed to resist corrosion for durability
- UL listed to help ensure safety
The 2 in. Rigid Conduit Locknuts (50-Pack) is ideal for securing threaded fittings to a steel outlet box. These locknuts are constructed of steel and are zinc-plated for rust resistance. Use indoor or outdoor.
- Secures rigid and IMC conduit to a metal enclosure
- Steel construction with zinc plating
- Compatible with galvanized rigid conduit
- Designed for indoor or outdoor use
The 2-1/2 in. Insulated Plastic Bushing is designed to protect wires in threaded rigid or IMC conduits. It is made of heat-tolerant thermoplastic. It can be used in indoor or outdoor environments.
- Protects wires in threaded rigid or IMC conduits
- Made from thermoplastic to withstand high-temperature environments
- Can be used indoors or outdoors
- UL and CSA listed
The 1-1/2 in. Compression Conduit Coupling is designed to join and bond 2 lengths of threadless IMC or rigid conduit. The coupling is crafted with galvanized steel for strength and is plated with steel for durability. It can be used indoors and in concrete-tight applications.
- Designed to join and bond threadless IMC or rigid conduit
- Use indoors and in concrete-tight applications
- Corrosion-resistant zinc-plated steel construction
- Steel-plated compression ring positively bonds conduit to the connector
- UL and CSA Listed for safety
The 1-1/2 in. Insulated Grounding Bushings (2-Pack) are designed to insulate and ground threaded rigid or IMC conduit. They are made of zinc alloy with a thermoplastic, heat-tolerant liner. A lug is provided for bonding the jumper to a neutral bus bar.
- Insulate and ground threaded rigid or IMC conduit
- Made of zinc alloy with a thermoplastic liner
- UL and CSA listed
- Lug included for connecting the jumper to a neutral bus bar
- For indoor use only
Use this 2 in. Conduit Chase Nipple along with a rigid coupling to terminate a run of threaded conduit into an enclosure box. This zinc chase nipple is rated for both indoor and outdoor use. The Chase Nipple meets UL and CSA requirements.
- Use with a rigid coupling to terminate threaded conduit into a box
- Made of zinc
- UL and CSA listed
- Usable indoors or outdoors
- Corrosion resistant
The 1-1/4 in. Rigid Conduit Locknuts (50-Pack) is ideal for securing threaded fittings to a steel outlet box. These locknuts are constructed of steel and are zinc-plated for rust resistance. They can be used indoor our outdoor.
- Secures rigid and IMC conduit to a metal enclosure
- Steel construction with zinc plating
- Compatible with galvanized rigid conduit
- Designed for indoor or outdoor use
Join lengths of threaded rigid conduit together with this Halex 1-1/4 in. Rigid Conduit Coupling. It is made of galvanized steel. It has resistance to corrosion.
- Joins and effectively bonds 2 lengths of IMC or threaded rigid conduit
- Galvanized steel for corrosion resistance
- UL Listed
- Usable indoors and outdoors
The 1-1/2 in. Chase Conduit Nipple is a connector made of non-corrosive zinc alloy and suitable for indoor or outdoor use. With rigid coupling (sold separately) the connector terminates threaded conduit to factory or fields punched, cut or drilled holes in metal boxes. With a locknut (sold separately) the connector provides a short raceway between boxes.
- Use with rigid coupling to terminate threaded conduit to factory or field holes in metal enclosure
- Use with a locknut to provide a raceway between enclosures
- Zinc alloy is high strength and non-corrosive
- Designed for indoor or outdoor use
- UL and CSA listed for safety and peace of mind
The 1 in. Compression Conduit Coupling is designed to join and bond 2 lengths of thread less IMC or rigid conduit. The coupling is crafted with corrosion-resistant zinc-plated steel for strength and is suitable for use indoors and in concrete-tight applications. It is CSA and UL listed to help guarantee safety.
- Designed to join and bond thread less IMC or rigid conduit
- Can be used indoors and in concrete-tight applications
- Corrosion-resistant zinc-plated steel construction
- Steel-plated compression ring positively bonds conduit to connector
- CSA and UL Listed for safety
Choose the 3/4 in. Rigid Conduit Coupling when you need to connect segments of threaded rigid or intermediate metal conduit (IMC). You can use this galvanized steel coupling indoors or outdoors. This coupling meets UL and CSA requirements.
- Joins 2 lengths of threaded rigid or IMC conduit
- Galvanized steel resists corrosion
- UL and CSA safety listings
- For indoor or outdoor applications
The 1 in. Rigid Conduit Coupling is made with galvanized steel to help ensure strength. It is UL listed for safety. Designed to join and bond threaded rigid or IMC conduit together, the coupling can be used inside and outside and resists corrosion to help ensure a long working life.
- Joins and effectively bonds 2 threaded rigid or IMC conduits together
- Can be used for indoor and outdoor applications
- Galvanized steel construction
- Designed to resist corrosion for durability
- UL listed to help ensure safety