Searched for "39131700"
Our 1 in. plastic knock-out seal. This item costs less than the steel snap-in blanks and provides a safer installation. A metal blank in a plastic box or enclosure is not grounded and could become a shock hazard.
- Plastic - provides safer installation
- Black
- For knock-outs
- Trade size: 1 in.
- Dimensions: 1.500 in. x .468 in.
- Die-Cast Zamak Construction
- Concrete Tight
Arlington's smallest insulated bushing. They protect cables from abrasion by the conduit. Often conduit is used to protect cables where damage could occur in a house or building.
- Press fit
- Holds firmly in place while pulling cables
- Some examples of use: cable tv, computer datelines, telephone/modem
- Trade size: 1/2 in.
- Dimensions: .531 in. x .84 in.
For Non-Metallic Cable
- Twin Screw
- For Indoor Use Only
- Use In Dry Location To Connect Non-Metallic Cable To Metal Enclosures
- For Armored Cable and Flexible Steel Conduit (Greenfield)
- Made Of Die-Cast Zinc
Arlington's Screw 90 degree non-metallic connector. It is used with non-metallic liquid-tight conduit, type B only. It is produced from UV rated plastic for long outdoor life.
- Conduit threads onto ferrule and up inside the outer body, inside taper squeezes down on the outside of conduit for a superior liquid tight seal
- To install simply screw onto the conduit until it stops
- Fitting is not in alignment with knock-out you may unscrew the fitting up to 1 full turn for adjustment
- Also for use with flexible non-metallic tubing
- Trade size: 3/4 in.
- Knockout size: 3/4 in.
- Dimensions: 2.489 in. x 0.545 in. x 2.872 in.
Arlington's Snap2It Zero to 90 degree Non-Metallic Connector for use this liquid-tight conduit, type B only. Easy to install with push on installation. It is produced from UV rated plastic for long outdoor life.
- Adjusts for all angles 0 degree -90 degree
- To adjust the angle simply loosen the center nut, twist to the correct angle and retighten
- Knockout size: 3/4 in.
- Trade size: 3/4 in.
Allied Tube & Conduit schedule 40 conduit is used for your electrical wiring needs. PVC Conduit provides non-metallic protection for your cables and conductors that provides good insulation without power loss or conductor heating. Allied Tube & Conduit is PVC Conduit is sunlight, corrosion, and fire resistant.
For Non-Metallic Cable
- Twin Screw
- For Indoor Use Only
- Use In Dry Location To Connect Non-Metallic Cable To Metal Enclosures
This liquid title connector is a member of the Snap2It Series. For use only with liquid-tight conduit, type B only. The product has easy, push on installation, no tools required.
- Competitively priced
- Fast installation
- Trade size: 3/4 in.
- Knockout size: 3/4 in.
- Dimensions: 2.376 in. x 0.619 in. x 1.420 in.
- Secures Pipe To Box Or Panel
- Bulk
- For Rigid Conduit
The 1/2 in. Compression Connector is a non-metallic UF Connector, compression type for underground feeder cable. It has a low-profile design to fit the new smaller UF cables as well as standard sizes. The connector is UL listed as well as CSA and has a cable range of 14/2 in. - 12/2 in.
- Compression type for underground feeder cable
- Low profile design to fit the new smaller UF cables as well as standard sizes
- Trade size: 1/2 in.
- Knockout size: 1/3 in.
- Cable range: 14/2 in. - 12/2 in.
- Dimensions: 1.792 in. x 0.630 in. x 1.042 in.
- Use Without Locknut
- Protects Wire
- For Rigid Conduit
- Green Straight Slot and Hex Head 10/32" Screw with Washer
- 3/8" Long
- Used For Quick Grounding Of Switch and Outlet Boxes
- Size 0 Fits 14/2,14/3,12/2, Ac and Mc
- Zinc Alloy
- 3/8" Greenfield (Flex)
- 14/2,12/3 Bx
The 3/8 in. Black Button Plastic Push-in Connectors (25-Pack) are versatile high-quality electrical fittings designed for indoor use. These connectors offer a fast and easy way to install single or multiple cables and require only light finger pressure to snap into 1/2 in. knock outs. The cables insert without a struggle for a smooth installation, to remove simply use a twist of a screwdriver.
- Ideal for firm, dependable connections
- Suitable for use with a wide range of cables
- Use light finger pressure to snap into 1/2 in. knock outs suitable for use with a wide range of cables
- Quick and easy to install quick and easy to install
- Use light finger pressure to snap into 1/2 in. knock outs
- Quick and easy to install
- Die-Cast Zamak Construction
- Two-Thread Locknut Won't Skip
- Concrete Tight
- Staked Screws
- Use To Cover Exposed Holes In Steel Outlet Boxes and Other Metal Enclosures
- Indoor Use Only
- 10 Per Bag
It is a thin-wall conduit strap. One-hole Snap-On type. 1-year warranty against defect.
- Steel material
- Thin wall
- 16-Gauge
- 3/4 in. length
5/8" Copper
- UL Approved For Direct Burial
- Cast Of High Strength Corrosion Resistant Copper Alloy
- Fits Over 5/8" Ground Rod
- Hex Head Bolt
- Accommodates Wire Sizes From #2 Stranded To #10 Solid
Connectors that are used for standard metal-clad cables. Product is made from galvanized steel and is made to fit to afc cable systems mc cable products. Connectors come 25 pieces to a package.
- Standard connectors for mc cables
- 25 Connectors per package
- Galvanized steel material
- Compatible with all manufacturer brands of mc cables