Searched for "39121300"
Used to close an outlet box. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- Flat, 1/2 in. center knockout
- Made of 0.0625 pre-galvanized steel
- cULus Listed
Used to mount 2-devices, such as switches or receptacles. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- 1/2 in. raised, drawn
- May use low voltage partition to conduit type boxes to divide power from voice/data
- UL Listed, CSA
- 5.5 cu. in. capacity
Used for mounting switches or receptacles. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- 5/8 in. raised
- UL Listed, CSA
- 4.5 cu. in. capacity
Made from durable pre-galvanized steel. Designed to cover and protect electrical wiring, switches and receptacles. UL and CSA Listed. Captive device screws.
- Key-hole allows for installation of cover without removing the box screws
- Blank cover
- Flat
- Meets UL and CSA compliance
Surface covers used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications. Exposed work covers are 1/2 in. raised. Complies with 2020 NEC Article 250.146 (A) and cULus Listed.
- Driven screws and break-off lock nuts included
- Meets the requirements of the 2020 NEC article 250.146 (A)
- 6.5 cu. in. capacity
- Hardware installation instructions preprinted on packaging
Ceiling Box Cover used to cover unused 3-1/2 in. and 4 in. round and octagonal boxes prior to the installation of a fan or fixture. It has a deep cover that works with pan boxes without the need to cut the post. It is an attractive cover and the screws don't show on the ceiling.
- Bracket has 2 separate cover mounting options, threaded post pushes in for flat ceilings or screws on for textured/uneven ceilings
- Use #8 screws provided or back out existing screws to accept notched bracket
- Plastic eliminates the scratches you get with painted metal covers
- Covers poorly cut drywall
- Non-rusting, paintable plastic
Surface covers used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications. Exposed work covers are 1/2 in. raised. Complies with 2020 NEC Article 250.146 (A) and cULus Listed.
- Driven screws and break-off lock nuts included
- Meets the requirements of the 2020 NEC article 250.146 (A)
- 6.5 cu. in. capacity
- Hardware installation instructions preprinted on packaging
Surface covers used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications. Required hardware for mounting the receptacle is provided. Installation instructions are preprinted on the polybag for convenience.
- Raised 1/2 in.
- 1.406 in. Dia receptacle
- 6.5 cu. in. capacity
- Meets 2014 NEC Article 250.16 (A)
Surface covers used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications. Exposed work covers are 1/2 in. raised. Complies with 2020 NEC Article 250.146 (A) and cULus Listed.
- Driven screws and break-off lock nuts included
- Meets the requirements of the 2020 NEC article 250.146 (A)
- 6.5 cu. in. capacity
- Hardware installation instructions preprinted on packaging
Manufactured from durable pre-galvanized steel. UL and CSA Listed. Captive device screws.
- Cover made from zinc, pre-coated, steel
- Houses duplex receptacle
- Cover includes captive mounting screws
- Meets UL and CSA compliance
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches and receptacles. All steel covers are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. Device mounting holes are pre-tapped to accept device fasteners.
- Raised 1/2 in.
- 30-50A receptacle, 2.141 in. Dia
- 10.3 cu. in. capacity
- Meets 2014 NEC Article 250.16 (A)
Covers are manufactured from durable pre-galvanized steel, and are designed to house and protect electrical wiring, switches, and receptacles. All steel covers are UL and CSA listed. All covers have captive device screws.
- Made from zinc, pre-coated, steel
- Used to mount switches or receptacles
- 3.5 cu. in. capacity
- cULus Listed
Covers are manufactured from durable pre-galvanized steel and are designed to house and protect electrical wiring, switches and receptacles. All steel covers are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. Device mounting holes are pre-tapped to accept device fasteners.
- Device mounts to cover
- Made from zinc, pre-coated, steel
- 10.3 cu. in. capacity
- Hardware and cover are packed in a poly-bag with printed catalog number, compliances and installation instructions
Used for mounting switches or receptacles. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- 1/2 in. raised, drawn
- UL Listed, CSA
- 3.5 cu. in. capacity
Covers are manufactured from durable pre-galvanized steel and are designed to house and protect electrical wiring, switches and receptacles. All steel covers are UL Listed and acceptable for use in 2-hour fire rated walls and ceilings. Mounting provisions are designed to make installation efficient.
- Key-hole allows for installation of cover without removing the box screws
- Blank cover
- Durable pregalvanized steel construction
- Mounting slot allows for installation of cover without removing the box screws
- m
Surface covers used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications. Exposed work covers are 1/2 in. raised. Complies with 2020 NEC Article 250.146 (A) and cULus Listed.
- Driven screws and break-off lock nuts included
- Meets the requirements of the 2020 NEC article 250.146 (A)
- 6.5 cu. in. capacity
- Hardware installation instructions preprinted on packaging
Brass round floor box covers are used to complete floor box installations on either carpet or tile. The covers are for use with round adjustable stamped steel or cast iron boxes. The cover design has brass duplex lift lids.
- Solid brass construction
- 3-7/8 in. O.D.
- Brass cover design has duplex lift lids
- Hardware and instructions included
Used to mount a single switch or receptacle. Made from pre-galvanized steel. Fits 4-11/16 in. square electrical boxes.
- 5/8 in. raised
- UL Listed, CSA
- 4.5 cu. in. capacity
- Accommodates 1 single device
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches and receptacles. UL Listed and acceptable for use in 2-hour fire rated walls and ceilings. Device mounting holes are pre-tapped to accept device fasteners.
- Raised 1/2 in.
- 2-device cover
- Key-hole allows for installation of cover without removing the box screws
- 5.5 cu. in. capacity
Surface covers used to support switches or receptacles in areas where the box is surface mounted or poitioned in exposed work applicaations. Exposed work covers are 1/2 in. raised. Complies with 2020 NEC Article 250.146 Amp and cULus Listed.
- Driven screws and break-off lock nuts included
- Meets the requirements of the 2020 NEC article 250.146 Amp
- 6.5 cu. in. capacity
- Hardware installation instructions preprinted on packaging
Used where fixtures will be installed. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- 1/2 in. raised, ears 2-3/4 in. O.C.
- Rated for light fixtures up to 50 lbs.
- UL Listed, CSA
- 3.0 cu. in. capacity
- Not rated for ceiling fans
Used to close an outlet box. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slots compensate up to 12 degree for box misalignment
- Flat, blank
- Made from zinc, pre-coated, steel
- cULus
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches and receptacles. UL listed and acceptable for use in 2-hour fire rated walls and ceilings. Mounting provisions designed to make installation efficient.
- Key-hole allows for installation of cover without removing the box screws
- Blank cover
- Flat
- cULus Listed
Used to support switches or receptacles. UL and CSA listed. Captive device screws included.
- Cover made from zinc, pre-coated, steel
- Blank cover
- Captive mounting screws
- Meets UL and CSA compliance