Searched for "39121300"
The Carlon 1-Gang 18 cu. in. round old work ceiling box is designed for use with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for residential and light commercial applications, the box is made of Polycarbonate, is listed for use with dry wall or sheet rock. The box is fire rated and UL listed for safety.
- 1-gang electrical box houses an installed ceiling switch or receptacle
- Not intended for fixture or support in ceilings
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- Mounting ears and swing clamps provide versatile installation options
- Sized for standard devices and switches
Used to house wiring devices such as switches or outlets. Acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Nine 1/2 in. knockouts
- UL Listed
- 18.0 cu. in. capacity
- Plaster ears
RACO KWIK-BRACE is a heavy-duty ceiling fan brace designed for new or existing construction where joists are accessible. Slides apart to accommodate joist spacing from 16" to 24" screws provided. Easy to follow instructions and mounting hardware included.
- #10-32 ceiling fan screws provided and #8-32 ceiling fixture mounting provision, metal protection plate provided
- Nail spurs for easy positioning
- Up-front ground screws for easy installation
- Easy to follow instructions and mounting hardware included
Surface mounted enclosure without entrance hubs which allows multiple conduits to be connected and wire splices made within. Appropriate round hole for conduit entrance must be cut. Male adapters or box adapters may be used to secure conduits to the box. May be concrete encased or buried but not warranted or listed to be watertight for all circumstances.
- 2 in. x 12 in. x 4 in.
- Corrosion resistance and physical properties needed for direct burial applications
- NEMA 6P rating per section 314
- UL E88685
Used to house wiring devices such as switches or outlets. Steel boxes are acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Eight 1/2 in. knockouts
- UL listed
- 12.5 cu. in. capacity
- Plaster ears
Ceiling Support Boxes are specifically designed for ceiling fan and ceiling or wall light fixture support. #10-32 ceiling fan screw provided and #8-32 ceiling fan fixture mounting screws. Easy installation, up-front ground screw.
- No protruding ground screw or fan mounting screws allows easy installation
- Metal protection plate eliminates debris or damage to wiring
- Easy to follow instructions and mounting hardware included
- Pan cover protects wiring after installation
- Rated 70 lbs. ceiling fan, 150 lbs. fixture support
- UL Listed
The 14 cu. in. PVC Old Work Electrical Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. This item is great for light commercial and residential applications. The box is crafted with non-conductive PVC for durability and is fire rated and UL Listed to help ensure safety.
- For residential and commercial old work applications including masonry walls
- Sized for standard devices and switches
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- UL Listed and 2-hour fire rating for safety
The Vertical 34 cu. in. PVC 2-Gang Wall Box Adjust-a-box with Adjustable Bracket for Vertical Mount is designed to allow adjustment of depth after the wall covering has been installed. Adjusts to any wall covering. Designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety. Includes integral clamp for 220-Volt power.
- Use with non-metallic sheathed cable in accordance with article 314 of the NEC
- Thermoplastic construction resists rust and won't conduct electricity
- Convenient adjustable bracket for ease of installation
- Metal stud bracket offers 0 in. to 1-3/4 in. adjustability
- Includes mounting hardware
- Meets NEMA OS-2
- UL listed and 2 hour fire rating for safety
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches, and receptacles. UL Listed and acceptable for use in 2-hour fire rated walls. Device mounting holes pre-tapped to accept 6-32 device screws.
- 3 in. x 2 in. x 1-1/2 in. Deep
- Non-gangable
- L clamps provided for non-metallic sheathed cable
- Plaster ears for cut-in or old work applications
- 7.5 cu. in. capacity
Raco 1-1/2 in. deep ceiling fan rated box is designed, tested, and UL listed for the dynamic loads of ceiling fans. Use this product when replacing an existing ceiling fan. Designed with the installer in mind, and rich in time saving features. A variety of products are available to meet nearly every application. Raco's Insider connector is included for use with non metallic sheathed cable.
- Durable pre-galvanized steel construction
- With proper fitting can be used for conduit, NMSC, armored, metal clad, or flex cable
- Plastic insider provided for nonmetallic sheathed cable
- 15.8 cu. in. capacity
- Maximum support load for ceiling fans 70 lbs. and 110 lbs. at 16 in. for static light fixtures
- Mounting hardware and instructions are included
Used for convenience outlets, switch boxes or small junction boxes. Popular for exposed work applications. Surface-mounted wiring requires the wiring to be enclosed with a protective covering such as EMT conduit.
- Drawn construction
- (10) 1/2 in. knockouts
- UL Listed
- 13.0 cu. in. capacity
- Raised ground
- Acceptable in 2-hour fire rated walls
We offer a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. The boxes have reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included. Bilingual instructions provided with every product.
- Rugged diecast aluminum construction
- State-of-the-art powder coat finish provides maximum weatherability and scratch resistance
- 16.0 cu. in. capacity
- NEMA 3R rated
The Carlon Zip Box Blue 2-Gang 25 cu. in. Old Work Non-Metallic Switch and Outlet Box are designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Residential and commercial use
- Use with non-metallic cable on accordance with code
- Thermoplastic construction resists rust and won't conduct electricity
- Mounting ears and swing clamps provide versatile installation options
- Sized for standard devices and switches and extra capacity for wiring and/or larger devices
- Built-in cable clamps hold wires firmly in place
- For safety, product is UL listed and fire rated
BELL offers a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. Reinforced connector outlets provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included.
- State of the art powdercoat finish provides maximum weatherability and scratch resistance
- Rugged die cast aluminum construction
- Internal hub threads comply with NEMA requirements and will accept all threaded fittings and threaded conduit
- 8-box mounting options with detachable lugs
- 18.3 cu. in. capacity
- 2 in. deep
- NEMA 3R compliant
Used to house wiring devices such as switches or outlets. Steel boxes are acceptable for use in 2-hour fire rated walls. Gangable option.
- Used with nonmetallic sheathed cable
- Gangable
- (7) 1/2 in. knockouts
- UL Listed, CSA
- 18.0 cu. in. capacity
- Plaster ears
Ceiling support boxes are designed for ceiling fans and ceiling or wall light fixture support. To be directly mounted to a joist. #10-32 ceiling fan and #8-32 provision for fixture mounting screws. Easy installation, up-front ground screw.
- No protruding ground screw or fan mounting screws
- Metal protection plate eliminates debris or damage to wiring
- INSIDER nonmetallic sheathed cable connector included
- 70 lbs. ceiling fan, 150 lbs. fixture support
- Easy-to-follow instructions and mounting hardware included
- 1-1/2 in. deep
- 1/2 in. side knockout
Designed with the electrician in mind. The Original Smart Boxes are unmatched in versatility in new work locations where you cannot swing a hammer or where final wall surfaces are uncertain, like kitchens and baths. They are unmatched in old or retro it work applications because they are always mounted to a stud. Before Smart Box all other manufacturers hung their cut boxes on flimsy 3/8 or 1/2 sheet rock or even worse lathe and plaster. Our Original Smart Boxes are unmatched in adjustability, as they are molded entirely of 1-piece with no moving parts to break or lose.
- Available in 1, 2, 3 and 4-gang and horizontal
- Step down feature allows for wire entrance in both top and bottom of box
- Heavy-duty 42 lbs. mounting screws supplied
- Mounts to wood or metal stud 25 g
- Adjustable depth
- Extra thick PVC wall material creates stability and rigidity
- Built-in wire clamps
- All 6/32 device holes are threaded
- RoHS compliant
- UL listed
- Material: PVC
The Carlon Zip Box Blue 1-Gang 20 cu. in. Old Work Non-Metallic Switch and Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the National Electric Code. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Use for old work applications in residential or commercial remodeling projects
- Designed for use with non-metallic sheathed cable and listed for masonry walls
- Sized for standard devices and switches and extra capacity for wiring and larger devices
- Thermoplastic construction resists rust and will not conduct electricity
- Built-in cable clamps hold wires firmly in place
- Mounting ears, swing bracket and captive nails provide wide range of installation options
- PVC construction is classified for 2-hour fire wall rating
- Meets NEMA OS-2, UL listed UL514C, E11461 and R9140
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled.
- Ideal for exposed work applications
- Combination screw heads allow quick installation
- Drawn construction
- (10) 1/2 in. knockouts and six 3/4 in. knockouts
- UL Listed
- 21.0 cu. in. capacity
- Acceptable in 2-hour fire rated walls
The Carlon Zip Box Blue 3-Gang 55 cu. in. Old Work Non-Metallic Switch and Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the National Electric Code. The product is great for light commercial and residential applications. The box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Sized for standard devices and switches and extra capacity for wiring and larger devices
- Compatible with NMSC
- Thermoplastic construction resists rust and won't conduct electricity
- Mounting ears and swing clamps provide versatile installation options
- Built-in cable clamps hold wires firmly in place
- UL listed and 2-hour fire rating for safety
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches, and receptacles. UL Listed and acceptable for use in 2-hour fire rated walls. Device mounting holes pre-tapped to accept 6-32 device screws.
- 3 in. x 2 in. x 2-1/2 in. D
- Can be ganged together to house multiple devices
- L clamps provided for nonmetallic sheathed cable (NMSC)
- Includes plaster ears and clips for cut-in or old work applications
- 12.5 cu. in. capacity
The Super Blue New Work 1-Gang 22 cu. in. Non-Metallic Hard-Shell Switch and Outlet Box is designed to not break or crack, even in extreme conditions. It is made with thermoplastic PVC for durability. Its hard-shell resists flexing and holds its shape in bad conditions and the box is fire rated and UL listed to help ensure safety.
- Use in new construction applications
- Sized for standard devices and switches and extra capacity for wiring and/or larger devices
- Designed to not break or crack, even in extreme environments
- Captive nails for wood stud mounting
- UL listed
- 2-hour fire rating
The round cover provides a weatherproof and watertight seal when in use with a 4 in. electrical conduit body or tee box. Made of durable PVC construction, this cover is non-corrosive and non-conductive ideal for outdoor applications. The cover comes with stainless steel screws.
- Use to cover a 4 in. round electrical box
- Durable PVC construction
- UL approved for outdoor applications
- Will not rust or corrode
- Can be painted
- Includes 4 stainless steel screws and neoprene gasket
We are proud to offer a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. The boxes have reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included. Bilingual instructions provided with every product.
- Reinforced connector outlet
- 8-box mounting options with detachable lugs
- Internal threads on hubs comply with NEMA requirements
- Hubs accept all threaded fittings and threaded conduit
- State-of-the-art powdercoat finish provides maximum weatherability and scratch resistance
- Rugged diecast aluminum construction
- Ground screw installed
- NEMA 3R rated
- 2-5/8 in. deep
- 36.0 cu. in.
- 2 closure plugs included with each box