Searched for "39121300"
Used to house wiring devices such as switches or outlets. Steel boxes are acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Eight 1/2 in. knockouts
- UL listed
- 12.5 cu. in. capacity
- Plaster ears
Used to house wiring devices such as switches or outlets. Acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Nine 1/2 in. knockouts
- UL Listed
- 18.0 cu. in. capacity
- Plaster ears
Surface mounted enclosure without entrance hubs which allows multiple conduits to be connected and wire splices made within. Appropriate round hole for conduit entrance must be cut. Male adapters or box adapters may be used to secure conduits to the box. May be concrete encased or buried but not warranted or listed to be watertight for all circumstances.
- 2 in. x 12 in. x 4 in.
- Corrosion resistance and physical properties needed for direct burial applications
- NEMA 6P rating per section 314
- UL E88685
Ceiling Support Boxes are specifically designed for ceiling fan and ceiling or wall light fixture support. #10-32 ceiling fan screw provided and #8-32 ceiling fan fixture mounting screws. Easy installation, up-front ground screw.
- No protruding ground screw or fan mounting screws allows easy installation
- Metal protection plate eliminates debris or damage to wiring
- Easy to follow instructions and mounting hardware included
- Pan cover protects wiring after installation
- Rated 70 lbs. ceiling fan, 150 lbs. fixture support
- UL Listed
The Carlon 1-Gang 18 cu. in. round old work ceiling box is designed for use with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for residential and light commercial applications, the box is made of Polycarbonate, is listed for use with dry wall or sheet rock. The box is fire rated and UL listed for safety.
- 1-gang electrical box houses an installed ceiling switch or receptacle
- Not intended for fixture or support in ceilings
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- Mounting ears and swing clamps provide versatile installation options
- Sized for standard devices and switches
Non-metallic boxes feature PVC construction for easier installation, greater performance and lower installation cost. Designed and listed for use with non-metallic sheathed cable in accordance with Article 314 of the National Electrical Code. They make fast work of any residential or light commercial application.
- Patented design allows for adjustment from 0 in. to 1-3/4 in. after installation
- Ideal for new work or retrofit (old work) applications
- Ideal for various drywall thicknesses and wall finishes
- Designed and listed for use with non-metallic sheathed cable in accordance with article 314 of the national electrical code
- All PVC boxes are permissible for use with 90 degree C connectors
Octagon Boxes are manufactured from durable pre-galvanized steel, and are designed to house and protect electrical wiring, switches, receptacles, and to support light fixtures. All steel octagon boxes are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. 8-32 fixture mounting screws are assembled.
- 4 in. x 2-1/8 in. deep
- Supplied with 5-1/2 in. and 4-3/4 in. knockouts
- Drawn steel construction
- Combination Phillips/slotted screw heads
- 21.5 cu. in. capacity
The 14 cu. in. PVC Old Work Electrical Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. This item is great for light commercial and residential applications. The box is crafted with non-conductive PVC for durability and is fire rated and UL Listed to help ensure safety.
- For residential and commercial old work applications including masonry walls
- Sized for standard devices and switches
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- UL Listed and 2-hour fire rating for safety
RACO KWIK-BRACE is a heavy-duty ceiling fan brace designed for new or existing construction where joists are accessible. Slides apart to accommodate joist spacing from 16" to 24" screws provided. Easy to follow instructions and mounting hardware included.
- #10-32 ceiling fan screws provided and #8-32 ceiling fixture mounting provision, metal protection plate provided
- Nail spurs for easy positioning
- Up-front ground screws for easy installation
- Easy to follow instructions and mounting hardware included
Designed with the electrician in mind. The Original Smart Boxes are unmatched in versatility in new work locations where you cannot swing a hammer or where final wall surfaces are uncertain, like kitchens and baths. They are unmatched in old or retrofit work.
- Available in 1, 2, 3 and 4-gang and horizontal
- Step down feature allows for wire entrance in both top and bottom of box
- Heavy-duty 42 lbs. mounting screws supplied
- Mounts to wood or metal stud 25 g
- Adjustable depth
- Extra thick PVC wall material creates stability and rigidity
- Built-in wire clamps
- All 6/32 device holes are threaded
- RoHS compliant
- UL listed
- Material: PVC
The Carlon Zip Box Blue 1-Gang 20 cu. in. Old Work Non-Metallic Switch and Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the National Electric Code. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Use for old work applications in residential or commercial remodeling projects
- Designed for use with non-metallic sheathed cable and listed for masonry walls
- Sized for standard devices and switches and extra capacity for wiring and larger devices
- Thermoplastic construction resists rust and will not conduct electricity
- Built-in cable clamps hold wires firmly in place
- Mounting ears, swing bracket and captive nails provide wide range of installation options
- PVC construction is classified for 2-hour fire wall rating
- Meets NEMA OS-2, UL listed UL514C, E11461 and R9140
The Carlon Super Blue New Work 1-Gang 18 cu. in. Non-Metallic Hard-Shell Switch and Outlet Box is designed to not break or crack, even in extreme conditions. It is made with thermoplastic PVC for durability. Its hard-shell resists flexing and holds its shape in bad conditions and the box is fire rated and UL listed to help ensure safety.
- For use with existing wall construction or re-models
- Sized for standard devices and switches
- Designed to not break or crack even in extreme environments
- Largest wire-fill capacity in its class
- Captive nails for wood stud mounting
- UL listed
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches, and receptacles. UL Listed and acceptable for use in 2-hour fire rated walls. Device mounting holes pre-tapped to accept 6-32 device screws.
- 3 in. x 2 in. x 1-1/2 in. Deep
- Non-gangable
- L clamps provided for non-metallic sheathed cable
- Plaster ears for cut-in or old work applications
- 7.5 cu. in. capacity
The Carlon Zip Box Blue 3-Gang 55 cu. in. Old Work Non-Metallic Switch and Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the National Electric Code. The product is great for light commercial and residential applications. The box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Sized for standard devices and switches and extra capacity for wiring and larger devices
- Compatible with NMSC
- Thermoplastic construction resists rust and won't conduct electricity
- Mounting ears and swing clamps provide versatile installation options
- Built-in cable clamps hold wires firmly in place
- UL listed and 2-hour fire rating for safety
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches, and receptacles. UL Listed and acceptable for use in 2-hour fire rated walls. Device mounting holes pre-tapped to accept 6-32 device screws.
- 3 in. x 2 in. x 2-1/2 in. D
- Can be ganged together to house multiple devices
- L clamps provided for nonmetallic sheathed cable (NMSC)
- Includes plaster ears and clips for cut-in or old work applications
- 12.5 cu. in. capacity
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled.
- Ideal for exposed work applications
- Combination screw heads allow quick installation
- Drawn construction
- (10) 1/2 in. knockouts and six 3/4 in. knockouts
- UL Listed
- 21.0 cu. in. capacity
- Acceptable in 2-hour fire rated walls
Raco 1-1/2 in. deep ceiling fan rated box is designed, tested, and UL listed for the dynamic loads of ceiling fans. Use this product when replacing an existing ceiling fan. Designed with the installer in mind, and rich in time saving features. A variety of products are available to meet nearly every application. Raco's Insider connector is included for use with non metallic sheathed cable.
- Durable pre-galvanized steel construction
- With proper fitting can be used for conduit, NMSC, armored, metal clad, or flex cable
- Plastic insider provided for nonmetallic sheathed cable
- 15.8 cu. in. capacity
- Maximum support load for ceiling fans 70 lbs. and 110 lbs. at 16 in. for static light fixtures
- Mounting hardware and instructions are included
BELL offers a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. Reinforced connector outlets provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included.
- State of the art powdercoat finish provides maximum weatherability and scratch resistance
- Rugged die cast aluminum construction
- Internal hub threads comply with NEMA requirements and will accept all threaded fittings and threaded conduit
- 8-box mounting options with detachable lugs
- 18.3 cu. in. capacity
- 2 in. deep
- NEMA 3R compliant
The Carlon Super Blue New Work Round 14.5 cu. in. Non-Metallic Hard-Shell Ceiling Box is designed to not break or crack, even in extreme conditions. It is made with thermoplastic PVC for durability. Its hard-shell resists flexing and holds its shape in bad conditions and the box is fire rated to help ensure safety.
- Designed to not break or crack, even in extreme environments
- Made of heat-resistant thermoplastic material
- Captive nails for wood stud mounting
- 3/0 and 4/0 mounting holes
- 2-hour fire rating
The Carlon Zip Box Blue 2-Gang 25 cu. in. Old Work Non-Metallic Switch and Outlet Box are designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Residential and commercial use
- Use with non-metallic cable on accordance with code
- Thermoplastic construction resists rust and won't conduct electricity
- Mounting ears and swing clamps provide versatile installation options
- Sized for standard devices and switches and extra capacity for wiring and/or larger devices
- Built-in cable clamps hold wires firmly in place
- For safety, product is UL listed and fire rated
The 15.16 cu. in. Round Junction Box with cover is designed for use as a conduit junction box. It is made with non-corrosive PVC for durability and features 4 knockouts with textured lid and a foam in-place gasket. The box is CSA and UL listed for safety.
- 4-knockout type socket openings, 90° spacing
- Non-corrosive, non-conductive PVC construction
- Body hubs are not threaded
- Textured lid with a foam in-place gasket
- CSA and UL listed to help ensure safety
- Comes with 4 stainless steel cover screws
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled.
- Ideal for exposed work applications
- Combination screw heads allow quick installation
- Drawn construction
- Fifteen 1/2 in. knockouts
- 18.0 cu. in. capacity
- cULus Listed
The Carlon Super Blue Old Work 2-Gang 34 cu. in. Non-Metallic Hard-Shell Switch and Outlet Box is designed to not break or crack, even in extreme conditions. It is made with thermoplastic PVC for durability. Its hard-shell resists flexing and holds its shape in bad conditions and the box is fire rated and UL listed to help ensure safety.
- For use with existing construction or existing walls
- Sized for standard devices and switches and extra capacity for wiring or larger devices
- Designed to not break or crack even in extreme environments
- Mounting ears and swing clamps provide versatile installation options
- Captive nails for wood stud mounting
- UL listed
The 2-Gang 32 cu. in. Type-2FSE FS Box is designed to take standard covers and accessories. It is made with non-corrosive PVC and is used for through terminations where 2 devices or additional wiring capacity is required. The box has integral mounting feet for easier installation and is fire rated and CSA and UL Listed for safety.
- For through terminations where 2 devices or additional wiring capacity is needed
- Non-corrosive PVC construction
- Takes standard covers and accessories
- CSA and UL listed and fire rated to help ensure safety
- Integral mounting feet for easier installation
"Add-a-Depth" switch box ring allows you to adjust the depth of a switch box when it was incorrectly installed into the wall. The ring acts as a barrier between combustible wall surfaces and the wiring system. It has an adjustment range of 1/4 in. - 1 in.
- Steel construction
- Includes two 1-1/8 in. screws
- 1 or 2-gang device boxes
- Subject to acceptance by an electric inspector
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8 to 32 cover mounting screws assembled.
- TKO knockout design provides installation flexibility
- Combination screw heads allow quick installation
- Welded construction
- Ten 1/2 in. KNOCK OUT and 6 TKO KNOCK OUT
- UL Listed
- 21.0 cu. in. capacity
- Raised ground
- Acceptable in 2-hour fire rated walls
RACO SADDLE-BOX 7120 series boxes are specifically designed for use in ceiling fan support or heavy lighting fixture applications. The unique U-shaped design allows box to mount on any standard 1-1/2 in. W joist. Fan/Fixture mounting hardware hidden behind protective decal until ready for mounting. Screw heads are not exposed to drywall mud and paint.
- Large 12.5 cu. in. wiring compartment
- For 1/2 in. 5/8 in. or 3/4 in. drywall
- Nonmetallic cable clamps (no need for separate connector)
- UL Listed
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches, and receptacles. UL Listed and acceptable for use in 2-hour fire rated walls. Device mounting holes pre-tapped to accept 6-32 device screws.
- 3 in. x 2 in. x 2-1/2 in. D
- L clamps provided for non-metallic sheathed cable
- Plaster ears for cut-in or old work applications
- Gangable
- 12.5 cu. in. capacity
The 1-Gang 19 cu. in. Type-FSS FS Box is designed for multiple dead-end circuit terminations and for where more support is needed in stub-up applications. It is made with non-corrosive PVC for durability and features integral mounting feet for easier installation. The box is designed to take standard covers, accessories and devices and is fire rated and UL and CSA Listed for safety.
- For multiple dead-end circuit terminations
- Provides additional support for stub-up applications
- Non-corrosive PVC construction
- Takes standard covers, accessories and devices
- CSA and UL listed and fire rated to help ensure safety
- Integral mounting feet
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled. Suitable for use without a bonding jumper in circuits up to 600-Volt.
- Use with AC/MC or flexible cable
- Combination screw heads allow quick installation
- Welded construction
- (3) 1/2 in. knockouts, 1 TKO knockout and 4 cable payouts
- UL Listed
- 21.0 cu. in. capacity
- FS style bracket, flush
Used for convenience outlets, switch boxes or small junction boxes. Popular for exposed work applications. Surface-mounted wiring requires the wiring to be enclosed with a protective covering such as EMT conduit.
- Drawn construction
- (10) 1/2 in. knockouts
- UL Listed
- 13.0 cu. in. capacity
- Raised ground
- Acceptable in 2-hour fire rated walls
The Carlon Zip Box Blue 2-Gang 32 cu. in. Non-Metallic Switch and Outlet Box is designed for use with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for residential and light commercial applications, the box is made with PVC, is listed for use with masonry walls and can be used with 90 degree C conductors. It meets NEMA OS-2 and is fire rated and UL listed for safety.
- Use with switches and outlet devices in new work applications where the wall is not already installed
- Sized for standard devices and switches
- Thermoplastic construction resists rust and won't conduct electricity
- Captive nails included
- UL listed
- 2-hour fire rating
The Legrand Wiremold 500 and 700 Series raceways is ideal for surface mounting small amounts of electrical wiring or communication cables. Surface metal raceway allows you to add fixtures and outlets without disturbing the drywall, plaster or insulation in your home. It is also ideal for adding wire when you can't go into the wall, such as on concrete foundations or brick walls. Combine with other 500 or 700 Series connectors, fittings and channel to ensure you have the right customization for every project.
- Designed especially for use in the installation of signal system and alarm wiring
- Base has 1/2 in. trade size knock outs
- Accepts NEMA double-gang standard faceplates
- Neutral ivory finish features an exclusive ScuffCoat finish
- Paintable and stainable with latex based products to blend with your decor
- Compatible with both 500 Series (B-Series) and 700 Series (BW series) raceways
The 90 cu. in. Non-Metallic Floor Box Base allows for various thicknesses of concrete pours. It is made with PVC and features a leveling ring that guarantees a level top, even if the box is tipped slightly during the pouring process. The base is CSA and UL listed and fire rated for safety.
- Minimum concrete depth is 3-1/2 in.
- Durable PVC construction
- Leveling ring ensures a level top during concrete pouring
- 2-1 in. and two 3/4 in. hubs
- Two 1 in. x 3/4 in. and two 3/4 in. x 1/2 in. reducer plugs
- Fire rated and CSA and UL listed to help ensure safety
Designed with the electrician in mind. The Original Smart Boxes are unmatched in versatility in new work locations where you cannot swing a hammer or where final wall surfaces are uncertain, like kitchens and baths. They are unmatched in old or retro it work applications because they are always mounted to a stud. Before Smart Box all other manufacturers hung their cut boxes on flimsy 3/8 or 1/2 sheet rock or even worse lathe and plaster. Our Original Smart Boxes are unmatched in adjustability, as they are molded entirely of 1-piece with no moving parts to break or lose.
- Available in 1, 2, 3 and 4-gang and horizontal
- Step down feature allows for wire entrance in both top and bottom of box
- Heavy-duty 42 lbs. mounting screws supplied
- Mounts to wood or metal stud 25 g
- Adjustable depth
- Extra thick PVC wall material creates stability and rigidity
- Built-in wire clamps
- All 6/32 device holes are threaded
- RoHS compliant
- UL listed
- Material: PVC
Single Door Cover for Round Floor Box, Brass for use with GFCI and Duplex Devices. Rugged construction coated with a light lacquer finish for extra protection resistance to wear, suite for high traffic areas. Gasket for watertight applications.
- For use with GFCI and duplex devices
- Gasketed for watertight applications
- UL scrub water tested
- UL E11461
Used to house wiring devices such as switches or outlets. Steel boxes are acceptable for use in 2-hour fire rated walls. Gangable option.
- Used with nonmetallic sheathed cable
- Gangable
- (1) 1/2 in. knockout
- UL Listed
- 10.5 cu. in. capacity
- 1 screw, plaster ears
SC200DVR is smart alternative where you would normally use separate high and Low-Voltage boxes. Designed to fit a standard 2-Gang face plate, this box-bracket combines an electrical box and Low-Voltage bracket into a single unit for fast, easy installation. No alignment tools are required and easy nail-on mounting provides precise placement and a professional finished appearance.
- For use where high and low-voltage boxes are adjacent to one another
- Accepts a standard 2-gang face plate
- Made of durable PVC that will not corrode or conduct electricity
- Backless design accommodates large and deep low devices
- Includes captive nails for easy installation
- UL listed
Round Ceiling Pans are manufactured from durable pre-galvanized steel and are designed to house and protect electrical wiring and to support light fixtures. All steel boxes are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. 8-32 cover mounting screws are assembled.
- Rated for 50 lb. fixture support
- "L" clamps provided for non-metallic sheathed cable (NMSC)
- 6.0 cu. in. capacity
- Do not use to support ceiling fans
26 cu. in. Nail-On Vapor-Tight Ceiling Box is designed to meet modern homes energy efficiency requirements. It is crafted with a thermoplastic material for durability. It also features a drywall flange and gaskets that, when combined, provide a vapor-tight seal that prevents air from freely flowing through the box.
- Creates an air seal around the perimeter of the box stopping airflow from entering or exiting the house
- 26 cu. in. capacity to accommodate large devices
- High-strength thermoplastic polymer construction
- Designed to not shatter when cold
- Drywall flange and gaskets will not allow air to freely flow through box
- Fire rated and UL listed for safety
- Angled side nails for easier installation
The Vertical 21 cu in. PVC 1-Gang Wall Box Adjust-a-box with Adjustable Bracket for Vertical Mount is designed to allow adjustment of depth after the wall covering has been installed. Adjusts to any wall covering. The Zip Box Blue 1-Gang 20 cu. in. Old Work Non-Metallic Switch and Outlet Box are designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Typical uses are in kitchens and bathrooms
- Protects indoor wiring from impacts, dust and wear
- Thermoplastic construction resists rust and won't conduct electricity
- Mounts to standard wood or metal stud horizontally
- Convenient adjustable bracket for ease of installation
- UL Listed
The Receptacle Drop-in Floor Box Kit combines many of the same features in our existing floor box line with the strength, durability, and style necessary to accommodate today's residential electrical and telecommunication needs. The Drop-In Floor box kit is the fastest way to put a floor socket anywhere power is needed. Designed to accommodate high and Low-Voltage applications and comes complete with everything needed for installation.
- Includes brass cover and pre-wired single receptacle
- Comes with Low-Voltage telephone/cable plate and one blank plate
- Hole saw included
- UL listed for safety
Ceiling support boxes are designed for ceiling fans and ceiling or wall light fixture support. To be directly mounted to a joist. #10-32 ceiling fan and #8-32 provision for fixture mounting screws. Easy installation, up-front ground screw.
- No protruding ground screw or fan mounting screws
- Metal protection plate eliminates debris or damage to wiring
- INSIDER nonmetallic sheathed cable connector included
- 70 lbs. ceiling fan, 150 lbs. fixture support
- Easy-to-follow instructions and mounting hardware included
- 1-1/2 in. deep
- 1/2 in. side knockout
The Junction Box is manufactured from plastic molding compound and features a foam-in-place gasketed lid fasteners with stainless-steel screws. It protects electrical wiring from falling dirt, hose-directed water, entry of water from pro-longed submersion and external ice formation. It is UL listed with a NEMA 6P rating per section 314.29, Exception of the National Electrical Code. It is ideal for indoor and outdoor use.
- Protects electrical wiring from falling dirt, hose-directed water, entry of water from prolonged submersion and external ice formation
- Ideal for indoor and outdoor use
- Manufactured from plastic molding compound that will not rust or corrode
- Foam-in-place gasketed lid fastened with stainless-steel screws
- Fire-rated junction box has UL listing for safety
- NEMA type 6P and type 4/4 ratings
- Offers all of the corrosion resistance and physical properties needed for direct burial applications
The 1-Gang 22-1/2 cu. in. Thermoplastic Vapor-Tight Wall Box features an offset drywall flange that is covered with a closed-cell foam gasket and additional gaskets over cable entry points. These combine to create a vapor-tight seal, ensuring that air cannot freely flow through the box. The box is made with a thermoplastic material for durability and is fire rated and UL listed to help ensure safety.
- Designed to meet energy efficiency requirements of modern homes
- 22-1/2 cu. in. capacity to accommodate large devices
- Designed to not shatter when cold
- 1/2 in. offset flange to help ensure a flush fit in 1/2 in. drywall
- Drywall flange and gaskets prevent free flow of air through box
- Fire rated and UL listed for safety
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled.
- Ideal for exposed work applications
- Combination screw heads allow quick installation
- Drawn construction
- (16) 1/2 in. knockouts
- 21.0 cu. in. capacity
- Acceptable in 2-hour fire rated walls
Used in the installation of ceiling or wall lighting fixtures. Combination screw heads provide for fast installation. Accommodates nonmetallic sheathed cable.
- Combination screw heads allow quick installation
- Drawn construction
- (3) 1/2 in. knockouts
- UL listed
- 15.5 cu. in. capacity
- Not rated for ceiling fans
- Rated to support light fixture up to 50 lbs.
Small surface metal raceway systems are the ideal choice for a homeowner that wants to extend circuits or communication cabling in their home. Surface metal raceway allows you to extend circuits, add fixtures or outlets without disturbing the drywall, plaster or insulation in your home. All parts are paintable to blend with room decor. The leading choice of professionals is now available for your DIY project.
- Solid base fan box is used for mounting a ceiling fan when extending an electrical circuit from an existing switch or receptacle
- Base has two 1/2 in. trade sized knockouts
- Ivory finish
- Paintable and stainable using latex based products
- UL listed