Searched for "39121300"
The Vertical 21 cu in. PVC 1-Gang Wall Box Adjust-a-box with Adjustable Bracket for Vertical Mount is designed to allow adjustment of depth after the wall covering has been installed. Adjusts to any wall covering. The Zip Box Blue 1-Gang 20 cu. in. Old Work Non-Metallic Switch and Outlet Box are designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Typical uses are in kitchens and bathrooms
- Protects indoor wiring from impacts, dust and wear
- Thermoplastic construction resists rust and won't conduct electricity
- Mounts to standard wood or metal stud horizontally
- Convenient adjustable bracket for ease of installation
- UL Listed
Used to house wiring devices such as switches or outlets. Acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Nine 1/2 in. knockouts
- UL Listed
- 18.0 cu. in. capacity
- Plaster ears
RACO KWIK-BRACE is a heavy-duty ceiling fan brace designed for new or existing construction where joists are accessible. Slides apart to accommodate joist spacing from 16" to 24" screws provided. Easy to follow instructions and mounting hardware included.
- #10-32 ceiling fan screws provided and #8-32 ceiling fixture mounting provision, metal protection plate provided
- Nail spurs for easy positioning
- Up-front ground screws for easy installation
- Easy to follow instructions and mounting hardware included
Surface mounted enclosure without entrance hubs which allows multiple conduits to be connected and wire splices made within. Appropriate round hole for conduit entrance must be cut. Male adapters or box adapters may be used to secure conduits to the box. May be concrete encased or buried but not warranted or listed to be watertight for all circumstances.
- 2 in. x 12 in. x 4 in.
- Corrosion resistance and physical properties needed for direct burial applications
- NEMA 6P rating per section 314
- UL E88685
Used to house wiring devices such as switches or outlets. Steel boxes are acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Eight 1/2 in. knockouts
- UL listed
- 12.5 cu. in. capacity
- Plaster ears
The 14 cu. in. PVC Old Work Electrical Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. This item is great for light commercial and residential applications. The box is crafted with non-conductive PVC for durability and is fire rated and UL Listed to help ensure safety.
- For residential and commercial old work applications including masonry walls
- Sized for standard devices and switches
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- UL Listed and 2-hour fire rating for safety
The Carlon Super Blue New Work Round 14.5 cu. in. Non-Metallic Hard-Shell Ceiling Box is designed to not break or crack, even in extreme conditions. It is made with thermoplastic PVC for durability. Its hard-shell resists flexing and holds its shape in bad conditions and the box is fire rated to help ensure safety.
- Designed to not break or crack, even in extreme environments
- Made of heat-resistant thermoplastic material
- Captive nails for wood stud mounting
- 3/0 and 4/0 mounting holes
- 2-hour fire rating
Ceiling Support Boxes are specifically designed for ceiling fan and ceiling or wall light fixture support. #10-32 ceiling fan screw provided and #8-32 ceiling fan fixture mounting screws. Easy installation, up-front ground screw.
- No protruding ground screw or fan mounting screws allows easy installation
- Metal protection plate eliminates debris or damage to wiring
- Easy to follow instructions and mounting hardware included
- Pan cover protects wiring after installation
- Rated 70 lbs. ceiling fan, 150 lbs. fixture support
- UL Listed
The Carlon Zip Box Blue 2-Gang 25 cu. in. Old Work Non-Metallic Switch and Outlet Box are designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL Listed to help ensure safety.
- Residential and commercial use
- Use with non-metallic cable on accordance with code
- Thermoplastic construction resists rust and won't conduct electricity
- Mounting ears and swing clamps provide versatile installation options
- Sized for standard devices and switches and extra capacity for wiring and/or larger devices
- Built-in cable clamps hold wires firmly in place
- For safety, product is UL Listed and fire rated
The 1-Gang Non-Metallic New Work Box with Bracket is great for residential and light commercial applications. It is made with PVC and works with non-metallic sheathed cable in accordance with Article 314 of the NEC. The box can mount to steel and wooden studs and is suitable for masonry walls.
- Use with non-metallic sheathed cable in accordance with article 314 of the NEC
- For residential and light commercial use
- Suitable for masonry walls
- Sized for standard devices and switches
- Thermoplastic construction resists rust and will not conduct electricity
- UL Listed to UL514C and fire rated for safety
- Meets NEMA OS-2
- Bracket for 3/8 in. to 5/8 in. wallboard, steel and wood stud mounting
- Product has pry outs
Designed with the electrician in mind. The Original Smart Boxes are unmatched in versatility in new work locations where you cannot swing a hammer or where final wall surfaces are uncertain, like kitchens and baths. They are unmatched in old or retrofit work.
- Available in 1, 2, 3 and 4-gang and horizontal
- Step down feature allows for wire entrance in both top and bottom of box
- Heavy-duty 42 lbs. mounting screws supplied
- Mounts to wood or metal stud 25 g
- Adjustable depth
- Extra thick PVC wall material creates stability and rigidity
- Built-in wire clamps
- All 6/32 device holes are threaded
- RoHS compliant
- UL listed
- Material: PVC
Non-metallic boxes feature PVC construction for easier installation, greater performance and lower installation cost. Designed and listed for use with non-metallic sheathed cable in accordance with Article 314 of the National Electrical Code. They make fast work of any residential or light commercial application.
- Patented design allows for adjustment from 0 in. to 1-3/4 in. after installation
- Ideal for new work or retrofit (old work) applications
- Ideal for various drywall thicknesses and wall finishes
- Designed and listed for use with non-metallic sheathed cable in accordance with article 314 of the national electrical code
- All PVC boxes are permissible for use with 90 degree C connectors
We are proud to offer a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. The boxes have reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included. Bilingual instructions provided with every product.
- Reinforced connector outlet
- 8-box mounting options with detachable lugs
- Internal threads on hubs comply with NEMA requirements
- Hubs accept all threaded fittings and threaded conduit
- State-of-the-art powdercoat finish provides maximum weatherability and scratch resistance
- Rugged diecast aluminum construction
- Ground screw installed
- NEMA 3R rated
- 2-5/8 in. deep
- 36.0 cu. in.
- 2 closure plugs included with each box
The Junction Box features a foam-in-place gasketed lid with stainless steel screws. It is designed to provide protection against falling dirt, hose-directed water, water entry during prolonged submersion and external ice formation. The box is made with a thermoplastic material and is CSA and UL listed to help ensure safety.
- Protects against external ice, dirt and water
- Features a formed-in-place foam gasket lid
- CSA and UL listed and suitable for both indoor and outdoor use
- Designed to not rust or corrode
- NEMA type 6P and type 4/4 ratings
- CSA and UL listed for safety
The Carlon Zip Box Blue 1-Gang 20 cu. in. Old Work Non-Metallic Switch and Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the National Electric Code. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Use for old work applications in residential or commercial remodeling projects
- Designed for use with non-metallic sheathed cable and listed for masonry walls
- Sized for standard devices and switches and extra capacity for wiring and larger devices
- Thermoplastic construction resists rust and will not conduct electricity
- Built-in cable clamps hold wires firmly in place
- Mounting ears, swing bracket and captive nails provide wide range of installation options
- PVC construction is classified for 2-hour fire wall rating
- Meets NEMA OS-2, UL listed UL514C, E11461 and R9140
The Carlon 1-Gang 18 cu. in. round old work ceiling box is designed for use with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for residential and light commercial applications, the box is made of Polycarbonate, is listed for use with dry wall or sheet rock. The box is fire rated and UL Listed for safety.
- 1-gang electrical box houses an installed ceiling switch or receptacle
- Not intended for fixture or support in ceilings
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- Mounting ears and swing clamps provide versatile installation options
- Sized for standard devices and switches
The Carlon Zip Box Blue 2-Gang 32 cu. in. Non-Metallic Switch and Outlet Box is designed for use with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for residential and light commercial applications, the box is made with PVC, is listed for use with masonry walls and can be used with 90 degree C conductors. It meets NEMA OS-2 and is fire rated and UL listed for safety.
- Use with switches and outlet devices in new work applications where the wall is not already installed
- Sized for standard devices and switches
- Thermoplastic construction resists rust and won't conduct electricity
- Captive nails included
- UL Listed
- 2-hour fire rating
The Vertical 49 cu. in. PVC 3-Gang Wall Box Adjust-a-box with Adjustable Bracket for Vertical Mount is designed to allow adjustment of depth after the wall covering has been installed. Adjusts to any wall covering. Designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL Listed to help ensure safety.
- Ideal for various drywall thicknesses and wall finishes
- Includes mounting hardware
- Convenient adjustable bracket for ease of installation
- Adjusts from 0 in. to 1-3/4 in. D
- Thermoplastic construction resists rust and won't conduct electricity
- UL Listed and 2-hour fire rating for safety
The Carlon 1-Gang 8 cu. in. Old Work Flanged Shallow Box is designed for use with non-metallic sheathed cable in accordance with article 314 of the NEC. Great for use in existing shallow walls, the box is crafted with PVC and features a front flange for mounting directly to surfaces. It is fire rated and UL Listed to help ensure safety.
- For use in existing shallow walls
- Great for residential and light commercial use
- Use with non-metallic sheathed cable in accordance with article 314 of the NEC
- PVC construction
- Front flange for mounting directly to surfaces
- Fire rated and UL Listed for safety
Raco 1-1/2 in. deep ceiling fan rated box is designed, tested, and UL listed for the dynamic loads of ceiling fans. Use this product when replacing an existing ceiling fan. Designed with the installer in mind, and rich in time saving features. A variety of products are available to meet nearly every application. Raco's Insider connector is included for use with non metallic sheathed cable.
- Durable pre-galvanized steel construction
- With proper fitting can be used for conduit, NMSC, armored, metal clad, or flex cable
- Plastic insider provided for nonmetallic sheathed cable
- 15.8 cu. in. capacity
- Maximum support load for ceiling fans 70 lbs. and 110 lbs. at 16 in. for static light fixtures
- Mounting hardware and instructions are included
The Zip Box Blue 1-Gang 8 cu. in. Non-Metallic Switch and Outlet Box are great for light commercial and residential applications. It is made with non-conductive PVC for durability and features a molded-on PVC bracket for easier installation. The box is designed for use with non-metallic sheathed cable in accordance with article 314 of the NEC and is UL Listed and fire rated for safety.
- Great for light commercial and residential use
- Use with non-metallic sheathed cable in accordance with article 314 of the NEC
- Non-conductive PVC construction
- UL Listed and fire rated to help ensure safety
- Molded-on PVC bracket
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled. Suitable for use without a bonding jumper in circuits up to 600-Volt.
- TKO knockout design provides installation flexibility
- FS style bracket, flush
- Welded construction
- (9) 1/2 in. knockouts and five TKO knockouts
- UL Listed
- 21.0 cu. in. capacity
- Acceptable in 2-hour fire rated walls
The round cover provides a weatherproof and watertight seal when in use with a 4 in. electrical conduit body or tee box. Made of durable PVC construction, this cover is non-corrosive and non-conductive ideal for outdoor applications. The cover comes with stainless steel screws.
- Use to cover a 4 in. round electrical box
- Durable PVC construction
- UL approved for outdoor applications
- Will not rust or corrode
- Can be painted
- Includes 4 stainless steel screws and neoprene gasket
BELL offers a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. Reinforced connector outlets provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included.
- State of the art powdercoat finish provides maximum weatherability and scratch resistance
- Rugged die cast aluminum construction
- Internal hub threads comply with NEMA requirements and will accept all threaded fittings and threaded conduit
- 8-box mounting options with detachable lugs
- 18.3 cu. in. capacity
- 2 in. deep
- NEMA 3R compliant
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled.
- Ideal for exposed work applications
- Combination screw heads allow quick installation
- Drawn construction
- (10) 1/2 in. knockouts and six 3/4 in. knockouts
- UL Listed
- 21.0 cu. in. capacity
- Acceptable in 2-hour fire rated walls
Used for convenience outlets, switch boxes or small junction boxes. Popular for exposed work applications. Surface-mounted wiring requires the wiring to be enclosed with a protective covering such as EMT conduit.
- Drawn construction
- (10) 1/2 in. knockouts
- UL Listed
- 13.0 cu. in. capacity
- Raised ground
- Acceptable in 2-hour fire rated walls
RACO SADDLE-BOX 7120 series boxes are specifically designed for use in ceiling fan support or heavy lighting fixture applications. The unique U-shaped design allows box to mount on any standard 1-1/2 in. W joist. Fan/Fixture mounting hardware hidden behind protective decal until ready for mounting. Screw heads are not exposed to drywall mud and paint.
- Large 12.5 cu. in. wiring compartment
- For 1/2 in. 5/8 in. or 3/4 in. drywall
- Nonmetallic cable clamps (no need for separate connector)
- UL Listed
The 1-Gang Weatherproof T-Box can be used with non-metallic wiring systems. Made of durable PVC, the T box is suitable for wet or damp locations. The box will not rust or corrode making it an ideal choice for outdoor, weatherproof applications.
- For use with non-metallic wiring systems only
- Can be used with lamp holders
- Made of durable PVC that will not rust or corrode
- Comes with three 1/2 in. threaded holes
- Mounting feet make for easy installation
- Suitable for use in wet or damp locations
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches, and receptacles. UL Listed and acceptable for use in 2-hour fire rated walls. Device mounting holes pre-tapped to accept 6-32 device screws.
- 3 in. x 2 in. x 1-1/2 in. Deep
- Non-gangable
- L clamps provided for non-metallic sheathed cable
- Plaster ears for cut-in or old work applications
- 7.5 cu. in. capacity
RACO round ceiling pans are manufactured from durable pre-galvanized steel and designed to house and protect electrical wiring and to support light fixtures. All steel boxes are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. 8-32 cover mounting screws are assembled.
- 4 in. round x 1/2 in. deep
- "L" clamps provided for nonmetallic sheathed cable
- Rated for 50 lb. fixture support
- Does not support ceiling fans
Provides additional cubic capacity. May be used an outlet box for surface conduit. Constructed from pre-galvanized steel.
- 4 in. x 1-1/2 in. D
- Drawn steel construction
- Supplied with 2-1/2 in. and 2-3/4 in. knockouts
- Combination Phillips/slotted screw heads
- 15.5 cu. in. capacity
Octagon Boxes are manufactured from durable pre-galvanized steel, and are designed to house and protect electrical wiring, switches, receptacles, and to support light fixtures. All steel octagon boxes are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. 8-32 fixture mounting screws are assembled.
- 4 in. x 2-1/8 in. deep
- Supplied with 5-1/2 in. and 4-3/4 in. knockouts
- Drawn steel construction
- Combination Phillips/slotted screw heads
- 21.5 cu. in. capacity
Made of rugged, seamless die-cast construction which will not allow entry of moisture. Reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included.
- Rugged die-cast aluminum construction
- State-of-the-art powder coat finish provides maximum weatherability and scratch resistance
- 16.0 cu. in. capacity
- NEMA 3R rated
Used to house wiring devices such as switches or outlets. Steel boxes are acceptable for use in 2-hour fire rated walls. Gangable option.
- Used with nonmetallic sheathed cable
- Gangable
- (1) 1/2 in. knockout
- UL Listed
- 12.5 cu. in. capacity
- Plaster ears
Bell offers a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. Boxes have reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included. Bilingual instructions provided with every product.
- Reinforced connector outlets
- 8-box mounting options with detachable lugs
- Internal threads on hubs comply with NEMA requirements
- Hubs accept all threaded fittings and threaded conduit
- State-of-the-art powdercoat finish provides maximum weatherability and scratch resistance
- Rugged diecast aluminum construction
- Ground screw installed
- NEMA 3R rated
- 2 in. deep
- 31.0 cu. in.
- 2 closure plugs included with each box
The 1-Gang 20 cu. in. Ceiling Box supports a ceiling fixture. Durable polycarbonate material is highly heat-resistant and non-conductive to safety support light fixtures. The box is designed for new residential or light commercial projects and uses an adjustable bar hanger, ground lug and screw for efficient installation.
- Listed for use with fixtures up to 50 lb.
- Supports 3/0 and 4/0 fixture
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- Adjustable 14-3/8 in. to 22-1/2 in. bar
- Ground lug included
- UL-Listed
The 2-Gang 32 cu. in. Type-2FSE FS Box is designed to take standard covers and accessories. It is made with non-corrosive PVC and is used for through terminations where 2 devices or additional wiring capacity is required. The box has integral mounting feet for easier installation and is fire rated and CSA and UL Listed for safety.
- For through terminations where 2 devices or additional wiring capacity is needed
- Non-corrosive PVC construction
- Takes standard covers and accessories
- CSA and UL listed and fire rated to help ensure safety
- Integral mounting feet for easier installation
Square boxes are manufactured from durable pre-galvanized steel and designed to house and protect electrical wiring, switches, receptacles and to support light fixtures. All steel boxes are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. 8-32 cover mounting screws are assembled.
- 4-11/16 in. square x 2-1/8 in. deep
- (4) 3/4 in., four 1 in., one 1/2 in. and three TKO knockouts
- Combination Phillips/slotted screw heads
- Welded steel construction
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches and receptacles. UL listed and acceptable for use in 2-hour fire rated walls. Device mounting holes are pre-tapped to accept 6-32 device screws.
- Fourteen 1/2 in. and 3/4 in. concentric knockouts
- Standard device spacing with tapped 6-32 holes for devices
- Welded construction
- 60.0 cu. in. capacity
BELL offers a selection of weatherproof boxes made of rugged, seamless die-cast construction which will not allow entry of moisture. Boxes have reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included. Bilingual instructions provided with every product.
- Rugged diecast aluminum construction
- State-of-the-art powdercoat finish provides maximum weather-ability and scratch-resistance
- 18.3 cu. in. capacity
- NEMA 3R rated
Round Ceiling Pans are manufactured from durable pre-galvanized steel and are designed to house and protect electrical wiring and to support light fixtures. All steel boxes are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. 8-32 cover mounting screws are assembled.
- Rated for 50 lb. fixture support
- "L" clamps provided for non-metallic sheathed cable (NMSC)
- 6.0 cu. in. capacity
- Do not use to support ceiling fans
Extension rings provide additional cubic capacity. May be used an outlet box for surface conduit. Constructed from 1/16 in. pre-galvanized steel.
- Combination screw heads allow quick installation
- Drawn construction
- Twelve 1/2 in. knockouts
- UL Listed
- 22.5 cu. in. capacity
"Add-a-Depth" switch box ring allows you to adjust the depth of a switch box when it was incorrectly installed into the wall. The ring acts as a barrier between combustible wall surfaces and the wiring system. It has an adjustment range of 1/4 in. - 1 in.
- Steel construction
- Includes two 1-1/8 in. screws
- 1 or 2-gang device boxes
- Subject to acceptance by an electric inspector
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Made from pre-galvanized steel. Combination screw heads provide fast installation.
- 4 in. x 1 in.-1/2 in. D
- Drawn steel construction
- Nine 1/2 in. knockouts
- Combination screw heads allow quick installation
- 15.5 cu. in. capacity
- Not rated for ceiling fan
- Rated for 50 lbs. light fixture
The Super Blue New Work Round 25 cu. in. Non-Metallic Hard-Shell Ceiling Box is designed to not break or crack, even in extreme conditions. Box is mounted on adjustable 11-1/2 in. to 18 1/2 in. hanger bar. It is made with thermoplastic PVC for durability. Its hard-shell resists flexing and holds its shape in bad conditions and the box is fire rated and UL listed to help ensure safety. Ground lug included.
- Listed for fixture support up to 50 lb.
- Not recommended for use with ceiling fans
- Thermoplastic construction designed to not break or crack, even in extreme environments
- Hanger bar adjusts from 11-1/2 in. to 18-1/2 in. for versatility
- 3/0 and 4/0 mounting holes
We offer a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. The boxes have reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included. Bilingual instructions provided with every product.
- Rugged diecast aluminum construction
- State-of-the-art powder coat finish provides maximum weatherability and scratch resistance
- 16.0 cu. in. capacity
- NEMA 3R rated
Ceiling support boxes are designed for ceiling fans and ceiling or wall light fixture support. To be directly mounted to a joist. #10-32 ceiling fan and #8-32 provision for fixture mounting screws. Easy installation, up-front ground screw.
- No protruding ground screw or fan mounting screws
- Metal protection plate eliminates debris or damage to wiring
- INSIDER nonmetallic sheathed cable connector included
- 70 lbs. ceiling fan, 150 lbs. fixture support
- Easy-to-follow instructions and mounting hardware included
- 2-1/8 in. deep
- 1/2 in. side knockout
Protect sensitive electrical components in outdoor environments by storing them in the Electrical Junction Box. This junction box is rated for direct burial applications in wet or dry environments.
- 6 in. x 6 in. x 6 in. size manufactured from thermoplastic molding compound and features a foam in place gasket lid for a tight fit attached with four stainless steel screws
- 4 molded feet for any mounting surface this enclose offers all the corrosion resistance and physical properties you need for direct burial applications
- Type 6p enclosure junction box is intended for indoor and outdoor use for a degree of protection in any type of harsh environment wet and dry
- UL listed and maintains a NEMA type 6p rating and type 4/4x rating
- UL and CSA safety listings
- 4 molded feet allow for surface mounting
- Manufactured from PVC or PPO thermoplastic molding compound and featuring foam-in-place gasket lids attached with stainless steel screws
- Junction box offers all the corrosion resistance and physical properties needed for direct burial applications
- Type 6P enclosures are intended for indoor or outdoor use