Searched for "39121300"
The Carlon 1-Gang 18 cu. in. round old work ceiling box is designed for use with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for residential and light commercial applications, the box is made of Polycarbonate, is listed for use with dry wall or sheet rock. The box is fire rated and UL listed for safety.
- 1-gang electrical box houses an installed ceiling switch or receptacle
- Not intended for fixture or support in ceilings
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- Mounting ears and swing clamps provide versatile installation options
- Sized for standard devices and switches
Used to house wiring devices such as switches or outlets. Acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Nine 1/2 in. knockouts
- UL Listed
- 18.0 cu. in. capacity
- Plaster ears
RACO KWIK-BRACE is a heavy-duty ceiling fan brace designed for new or existing construction where joists are accessible. Slides apart to accommodate joist spacing from 16" to 24" screws provided. Easy to follow instructions and mounting hardware included.
- #10-32 ceiling fan screws provided and #8-32 ceiling fixture mounting provision, metal protection plate provided
- Nail spurs for easy positioning
- Up-front ground screws for easy installation
- Easy to follow instructions and mounting hardware included
Surface mounted enclosure without entrance hubs which allows multiple conduits to be connected and wire splices made within. Appropriate round hole for conduit entrance must be cut. Male adapters or box adapters may be used to secure conduits to the box. May be concrete encased or buried but not warranted or listed to be watertight for all circumstances.
- 2 in. x 12 in. x 4 in.
- Corrosion resistance and physical properties needed for direct burial applications
- NEMA 6P rating per section 314
- UL E88685
Used to house wiring devices such as switches or outlets. Steel boxes are acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Eight 1/2 in. knockouts
- UL listed
- 12.5 cu. in. capacity
- Plaster ears
Ceiling Support Boxes are specifically designed for ceiling fan and ceiling or wall light fixture support. #10-32 ceiling fan screw provided and #8-32 ceiling fan fixture mounting screws. Easy installation, up-front ground screw.
- No protruding ground screw or fan mounting screws allows easy installation
- Metal protection plate eliminates debris or damage to wiring
- Easy to follow instructions and mounting hardware included
- Pan cover protects wiring after installation
- Rated 70 lbs. ceiling fan, 150 lbs. fixture support
- UL Listed
The 14 cu. in. PVC Old Work Electrical Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. This item is great for light commercial and residential applications. The box is crafted with non-conductive PVC for durability and is fire rated and UL Listed to help ensure safety.
- For residential and commercial old work applications including masonry walls
- Sized for standard devices and switches
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- UL Listed and 2-hour fire rating for safety
The Vertical 34 cu. in. PVC 2-Gang Wall Box Adjust-a-box with Adjustable Bracket for Vertical Mount is designed to allow adjustment of depth after the wall covering has been installed. Adjusts to any wall covering. Designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety. Includes integral clamp for 220-Volt power.
- Use with non-metallic sheathed cable in accordance with article 314 of the NEC
- Thermoplastic construction resists rust and won't conduct electricity
- Convenient adjustable bracket for ease of installation
- Metal stud bracket offers 0 in. to 1-3/4 in. adjustability
- Includes mounting hardware
- Meets NEMA OS-2
- UL listed and 2 hour fire rating for safety
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches, and receptacles. UL Listed and acceptable for use in 2-hour fire rated walls. Device mounting holes pre-tapped to accept 6-32 device screws.
- 3 in. x 2 in. x 1-1/2 in. Deep
- Non-gangable
- L clamps provided for non-metallic sheathed cable
- Plaster ears for cut-in or old work applications
- 7.5 cu. in. capacity
Raco 1-1/2 in. deep ceiling fan rated box is designed, tested, and UL listed for the dynamic loads of ceiling fans. Use this product when replacing an existing ceiling fan. Designed with the installer in mind, and rich in time saving features. A variety of products are available to meet nearly every application. Raco's Insider connector is included for use with non metallic sheathed cable.
- Durable pre-galvanized steel construction
- With proper fitting can be used for conduit, NMSC, armored, metal clad, or flex cable
- Plastic insider provided for nonmetallic sheathed cable
- 15.8 cu. in. capacity
- Maximum support load for ceiling fans 70 lbs. and 110 lbs. at 16 in. for static light fixtures
- Mounting hardware and instructions are included
Used for convenience outlets, switch boxes or small junction boxes. Popular for exposed work applications. Surface-mounted wiring requires the wiring to be enclosed with a protective covering such as EMT conduit.
- Drawn construction
- (10) 1/2 in. knockouts
- UL Listed
- 13.0 cu. in. capacity
- Raised ground
- Acceptable in 2-hour fire rated walls
We offer a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. The boxes have reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included. Bilingual instructions provided with every product.
- Rugged diecast aluminum construction
- State-of-the-art powder coat finish provides maximum weatherability and scratch resistance
- 16.0 cu. in. capacity
- NEMA 3R rated
The Carlon Zip Box Blue 2-Gang 25 cu. in. Old Work Non-Metallic Switch and Outlet Box are designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Residential and commercial use
- Use with non-metallic cable on accordance with code
- Thermoplastic construction resists rust and won't conduct electricity
- Mounting ears and swing clamps provide versatile installation options
- Sized for standard devices and switches and extra capacity for wiring and/or larger devices
- Built-in cable clamps hold wires firmly in place
- For safety, product is UL listed and fire rated
BELL offers a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. Reinforced connector outlets provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included.
- State of the art powdercoat finish provides maximum weatherability and scratch resistance
- Rugged die cast aluminum construction
- Internal hub threads comply with NEMA requirements and will accept all threaded fittings and threaded conduit
- 8-box mounting options with detachable lugs
- 18.3 cu. in. capacity
- 2 in. deep
- NEMA 3R compliant
Used to house wiring devices such as switches or outlets. Steel boxes are acceptable for use in 2-hour fire rated walls. Gangable option.
- Used with nonmetallic sheathed cable
- Gangable
- (7) 1/2 in. knockouts
- UL Listed, CSA
- 18.0 cu. in. capacity
- Plaster ears
Ceiling support boxes are designed for ceiling fans and ceiling or wall light fixture support. To be directly mounted to a joist. #10-32 ceiling fan and #8-32 provision for fixture mounting screws. Easy installation, up-front ground screw.
- No protruding ground screw or fan mounting screws
- Metal protection plate eliminates debris or damage to wiring
- INSIDER nonmetallic sheathed cable connector included
- 70 lbs. ceiling fan, 150 lbs. fixture support
- Easy-to-follow instructions and mounting hardware included
- 1-1/2 in. deep
- 1/2 in. side knockout
Designed with the electrician in mind. The Original Smart Boxes are unmatched in versatility in new work locations where you cannot swing a hammer or where final wall surfaces are uncertain, like kitchens and baths. They are unmatched in old or retro it work applications because they are always mounted to a stud. Before Smart Box all other manufacturers hung their cut boxes on flimsy 3/8 or 1/2 sheet rock or even worse lathe and plaster. Our Original Smart Boxes are unmatched in adjustability, as they are molded entirely of 1-piece with no moving parts to break or lose.
- Available in 1, 2, 3 and 4-gang and horizontal
- Step down feature allows for wire entrance in both top and bottom of box
- Heavy-duty 42 lbs. mounting screws supplied
- Mounts to wood or metal stud 25 g
- Adjustable depth
- Extra thick PVC wall material creates stability and rigidity
- Built-in wire clamps
- All 6/32 device holes are threaded
- RoHS compliant
- UL listed
- Material: PVC
The Carlon Zip Box Blue 1-Gang 20 cu. in. Old Work Non-Metallic Switch and Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the National Electric Code. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Use for old work applications in residential or commercial remodeling projects
- Designed for use with non-metallic sheathed cable and listed for masonry walls
- Sized for standard devices and switches and extra capacity for wiring and larger devices
- Thermoplastic construction resists rust and will not conduct electricity
- Built-in cable clamps hold wires firmly in place
- Mounting ears, swing bracket and captive nails provide wide range of installation options
- PVC construction is classified for 2-hour fire wall rating
- Meets NEMA OS-2, UL listed UL514C, E11461 and R9140
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled.
- Ideal for exposed work applications
- Combination screw heads allow quick installation
- Drawn construction
- (10) 1/2 in. knockouts and six 3/4 in. knockouts
- UL Listed
- 21.0 cu. in. capacity
- Acceptable in 2-hour fire rated walls
The Carlon Zip Box Blue 3-Gang 55 cu. in. Old Work Non-Metallic Switch and Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the National Electric Code. The product is great for light commercial and residential applications. The box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Sized for standard devices and switches and extra capacity for wiring and larger devices
- Compatible with NMSC
- Thermoplastic construction resists rust and won't conduct electricity
- Mounting ears and swing clamps provide versatile installation options
- Built-in cable clamps hold wires firmly in place
- UL listed and 2-hour fire rating for safety
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches, and receptacles. UL Listed and acceptable for use in 2-hour fire rated walls. Device mounting holes pre-tapped to accept 6-32 device screws.
- 3 in. x 2 in. x 2-1/2 in. D
- Can be ganged together to house multiple devices
- L clamps provided for nonmetallic sheathed cable (NMSC)
- Includes plaster ears and clips for cut-in or old work applications
- 12.5 cu. in. capacity
The Super Blue New Work 1-Gang 22 cu. in. Non-Metallic Hard-Shell Switch and Outlet Box is designed to not break or crack, even in extreme conditions. It is made with thermoplastic PVC for durability. Its hard-shell resists flexing and holds its shape in bad conditions and the box is fire rated and UL listed to help ensure safety.
- Use in new construction applications
- Sized for standard devices and switches and extra capacity for wiring and/or larger devices
- Designed to not break or crack, even in extreme environments
- Captive nails for wood stud mounting
- UL listed
- 2-hour fire rating
The round cover provides a weatherproof and watertight seal when in use with a 4 in. electrical conduit body or tee box. Made of durable PVC construction, this cover is non-corrosive and non-conductive ideal for outdoor applications. The cover comes with stainless steel screws.
- Use to cover a 4 in. round electrical box
- Durable PVC construction
- UL approved for outdoor applications
- Will not rust or corrode
- Can be painted
- Includes 4 stainless steel screws and neoprene gasket
We are proud to offer a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. The boxes have reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included. Bilingual instructions provided with every product.
- Reinforced connector outlet
- 8-box mounting options with detachable lugs
- Internal threads on hubs comply with NEMA requirements
- Hubs accept all threaded fittings and threaded conduit
- State-of-the-art powdercoat finish provides maximum weatherability and scratch resistance
- Rugged diecast aluminum construction
- Ground screw installed
- NEMA 3R rated
- 2-5/8 in. deep
- 36.0 cu. in.
- 2 closure plugs included with each box
Small surface metal raceway systems are the ideal choice for a homeowner that wants to extend circuits or communication cabling in their home. Surface metal raceway allows you to extend circuits, add fixtures or outlets without disturbing the drywall, plaster or insulation in your home. All parts are paintable to blend with room decor. The leading choice of professionals is now available for your DIY project.
- Solid base fan box is used for mounting a ceiling fan when extending an electrical circuit from an existing switch or receptacle
- Base has two 1/2 in. trade sized knockouts
- Ivory finish
- Paintable and stainable using latex based products
- UL listed
Here is the fastest installation choice where only Low-Voltage is required. Designed to fit a standard 1-Gang faceplate, this Low-Voltage bracket features an easy nail-on mounting or screw-in bracket, while a hard shell provides increased durability and no racking. The resi-rings accept 3/4 in., 1 in. and 1-1/4 in. resi-gard fittings.
- Designed for the installation of low-voltage devices such as a cable television, data communications or telephone jacks
- PVC construction
- Bracket mounts on wood or steel studs
- Backless design accommodates the space and bend radius requirements of coaxial or data/communication cables
- UL Listed
- Breakaway vertical mounting flange allows the use of a low-voltage add-on bracket
26 cu. in. Nail-On Vapor-Tight Ceiling Box is designed to meet modern homes energy efficiency requirements. It is crafted with a thermoplastic material for durability. It also features a drywall flange and gaskets that, when combined, provide a vapor-tight seal that prevents air from freely flowing through the box.
- Creates an air seal around the perimeter of the box stopping airflow from entering or exiting the house
- 26 cu. in. capacity to accommodate large devices
- High-strength thermoplastic polymer construction
- Designed to not shatter when cold
- Drywall flange and gaskets will not allow air to freely flow through box
- Fire rated and UL listed for safety
- Angled side nails for easier installation
The Super Blue New Work 2-Gang 35 cu. in. Non-Metallic Hard-Shell Switch and Outlet Box is designed to not break or crack, even in extreme conditions. It is made with thermoplastic PVC for durability. Its hard shell resists flexing and holds its shape in bad conditions, and the box is fire rated and UL listed to help ensure safety.
- For use in new construction where the walls have not been closed in with wallboard
- Sized for standard devices and switches and extra capacity for wiring or larger devices
- Designed to not break or crack even in extreme environments
- Captive nails for easy installation
- UL listed and two hour fire rating
High impact resistant thermoplastic Round Floor Box cover. Non-Metallic, for use with Duplex Devices. Compatible with standard NEMA duplex and 1-1/2 in. NPS receptacles.
- Compatible with standard NEMA duplex and 1-1/2 in. NPS receptacles
- Approved for all types of finish flooring
- UL scrub water tested
- UL E11461
The Zip Box Blue 1-Gang 8 cu. in. Non-Metallic Switch and Outlet Box are great for light commercial and residential applications. It is made with non-conductive PVC for durability and features a molded-on PVC bracket for easier installation. The box is designed for use with non-metallic sheathed cable in accordance with article 314 of the NEC and is UL listed and fire rated for safety.
- Great for light commercial and residential use
- Use with non-metallic sheathed cable in accordance with article 314 of the NEC
- Non-conductive PVC construction
- UL listed and fire rated to help ensure safety
- Molded-on PVC bracket
Protect sensitive electrical components in outdoor environments by storing them in the Electrical Junction Box. This junction box is rated for direct burial applications in wet or dry environments.
- 6 in. x 6 in. x 6 in. size manufactured from thermoplastic molding compound and features a foam in place gasket lid for a tight fit attached with four stainless steel screws
- 4 molded feet for any mounting surface this enclose offers all the corrosion resistance and physical properties you need for direct burial applications
- Type 6p enclosure junction box is intended for indoor and outdoor use for a degree of protection in any type of harsh environment wet and dry
- UL listed and maintains a NEMA type 6p rating and type 4/4x rating
- UL and CSA safety listings
- 4 molded feet allow for surface mounting
- Manufactured from PVC or PPO thermoplastic molding compound and featuring foam-in-place gasket lids attached with stainless steel screws
- Junction box offers all the corrosion resistance and physical properties needed for direct burial applications
- Type 6P enclosures are intended for indoor or outdoor use
Used to house wiring devices such as switches or outlets. Steel boxes are acceptable for use in 2-hour fire rated walls. Gangable option.
- Used with AC/MC/Flex cable
- Gangable
- (1) 1/2 in. knockout
- UL Listed
- 12.5 cu. in. capacity
- Pester ears, old work, Griptite
The Carlon Zip Box Blue 2-Gang 32 cu. in. Non-Metallic Switch and Outlet Box is designed for use with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for residential and light commercial applications, the box is made with PVC, is listed for use with masonry walls and can be used with 90 degree C conductors. It meets NEMA OS-2 and is fire rated and UL listed for safety.
- Use with switches and outlet devices in new work applications where the wall is not already installed
- Sized for standard devices and switches
- Thermoplastic construction resists rust and won't conduct electricity
- Captive nails included
- UL listed
- 2-hour fire rating
The 1-Gang Non-Metallic Duplex Cover is designed for use with round floor boxes. It is made with a high-impact thermoplastic material for durability and features 3/8 in. drill points for Low-Voltage cable pass-through. It is CSA and UL listed to help ensure safety.
- For use with round floor boxes
- For tile and carpet applications
- High-impact thermoplastic construction
- 3/8 in. drill points provided for low-voltage cable pass-through
- Approved for use on all finish flooring
- UL scrub water tested
Use the Old work box support clip to lock steel switch boxes tightly to wall. Can be used on plaster, dry wall, concrete block, brick or concrete. Adapts to any wall thickness up to 3/4 in. Durable steel construction.
- Adapts to any wall thickness up to 3/4 in.
- Clips to plaster, drywall, concrete block, brick or concrete
- For use in old work applications
- UL E13938
The Carlon Super Blue New Work 1-Gang 18 cu. in. Non-Metallic Hard-Shell Switch and Outlet Box is designed to not break or crack, even in extreme conditions. It is made with thermoplastic PVC for durability. Its hard-shell resists flexing and holds its shape in bad conditions and the box is fire rated and UL listed to help ensure safety.
- For use with existing wall construction or re-models
- Sized for standard devices and switches
- Designed to not break or crack even in extreme environments
- Largest wire-fill capacity in its class
- Captive nails for wood stud mounting
- UL listed
Square boxes are manufactured from durable pre-galvanized steel and designed to house and protect electrical wiring, switches, receptacles and to support light fixtures. All steel boxes are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. 8-32 cover mounting screws are assembled.
- 4-11/16 in. square x 2-1/8 in. deep
- (4) 3/4 in., four 1 in., one 1/2 in. and three TKO knockouts
- Combination Phillips/slotted screw heads
- Welded steel construction
Brass 1-Piece Carpet Plate for Flush Service Floor Boxes. 5-3/4 in. Dia for use with 8 and 600 Series floor boxes. Furnished with sealing gasket and 8-32 in. x 1 in. brass screws.
- Flush service floor boxes
- For use with 68 and 600 series floor boxes
- Furnished with sealing gasket and 8-32 x 1 brass screws
- UL E11461
Manufactured from durable pre-galvanized steel. Designed to add additional cubic capacity to an electrical box. UL listed and acceptable for use in 2-hour fire rated walls. Device mounting holes pre-tapped to accept 6-32 device screws.
- Popular for exposed work applications
- Key holes provided for ease of installation
- Supplied with 8-1/2 in. knockouts
- 13.0 cu. in. capacity
The Carlon Zip Box Blue 4-Gang 71 cu. in. Old Work Non-Metallic Switch and Outlet Box are designed to work with non-metallic sheathed cable in accordance with article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Use in re-model applications where the finished wall is already installed
- Sized for standard devices and switches and extra capacity for wiring and/or larger devices
- Thermoplastic construction resists rust and won't conduct electricity
- Mounting ears and swing clamps provide versatile installation options
- Built-in cable clamps hold wires firmly in place
- UL listed
The Vertical 49 cu. in. PVC 3-Gang Wall Box Adjust-a-box with Adjustable Bracket for Vertical Mount is designed to allow adjustment of depth after the wall covering has been installed. Adjusts to any wall covering. Designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Ideal for various drywall thicknesses and wall finishes
- Includes mounting hardware
- Convenient adjustable bracket for ease of installation
- Adjusts from 0 in. to 1-3/4 in. D
- Thermoplastic construction resists rust and won't conduct electricity
- UL listed and 2-hour fire rating for safety
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches, receptacles and to support light fixtures. All steel boxes are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. 8-32 cover mounting screws are assembled.
- 4 in. square x 1-1/2 in. D
- Welded steel construction
- H bracket and USB for wood and metal stud
- BX clamps provided for steel and aluminum armored cable, MCI cable, MCI-A cable and flexible conduit
- Combination Phillips/slotted screw heads
The 1-Gang Non-Metallic New Work Box with Bracket is great for residential and light commercial applications. It is made with PVC and works with non-metallic sheathed cable in accordance with Article 314 of the NEC. The box can mount to steel and wooden studs and is suitable for masonry walls.
- Use with non-metallic sheathed cable in accordance with article 314 of the NEC
- For residential and light commercial use
- Suitable for masonry walls
- Sized for standard devices and switches
- Thermoplastic construction resists rust and will not conduct electricity
- UL listed to UL514C and fire rated for safety
- Meets NEMA OS-2
- Bracket for 3/8 in. to 5/8 in. wallboard, steel and wood stud mounting
- Product has pry outs
Bell offers a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. Boxes have reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included. Bilingual instructions provided with every product.
- Reinforced connector outlets
- 8-box mounting options with detachable lugs
- Internal threads on hubs comply with NEMA requirements
- Hubs accept all threaded fittings and threaded conduit
- State-of-the-art powdercoat finish provides maximum weatherability and scratch resistance
- Rugged diecast aluminum construction
- Ground screw installed
- NEMA 3R rated
- 2 in. deep
- 31.0 cu. in.
- 2 closure plugs included with each box
Provides additional cubic capacity. May be used an outlet box for surface conduit. Constructed from pre-galvanized steel.
- 4 in. x 1-1/2 in. D
- Drawn steel construction
- Supplied with 2-1/2 in. and 2-3/4 in. knockouts
- Combination Phillips/slotted screw heads
- 15.5 cu. in. capacity
The Junction Box provides protection against falling dirt, hose-directed water, external ice formation and the entry of water during prolonged submersion. It is made with plastic and features a gasketed lid attached with stainless-steel screws. The box is UL Listed with a NEMA 6P rating per section 314.29, exception of the NEC.
- For indoor and outdoor use
- Plastic construction
- Gasketed lid attached with stainless-steel screws
- Designed to not rust or corrode
- NEMA type 6P and type 4/4 ratings
- UL listed to help ensure safety
Extension rings provide additional cubic capacity. May be used an outlet box for surface conduit. Constructed from 1/16 in. pre-galvanized steel.
- Combination screw heads allow quick installation
- Drawn construction
- Twelve 1/2 in. knockouts
- UL Listed
- 22.5 cu. in. capacity
The Junction Box features a foam-in-place gasketed lid with stainless steel screws. It is designed to provide protection against falling dirt, hose-directed water, water entry during prolonged submersion and external ice formation. The box is made with a thermoplastic material and is CSA and UL listed to help ensure safety.
- Protects against external ice, dirt and water
- Features a formed-in-place foam gasket lid
- CSA and UL listed and suitable for both indoor and outdoor use
- Designed to not rust or corrode
- NEMA type 6P and type 4/4 ratings
- CSA and UL listed for safety