Searched for "39121300"
Used to house wiring devices such as switches or outlets. Steel boxes are acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Eight 1/2 in. knockouts
- UL listed
- 12.5 cu. in. capacity
- Plaster ears
Used to house wiring devices such as switches or outlets. Acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Nine 1/2 in. knockouts
- UL Listed
- 18.0 cu. in. capacity
- Plaster ears
Surface mounted enclosure without entrance hubs which allows multiple conduits to be connected and wire splices made within. Appropriate round hole for conduit entrance must be cut. Male adapters or box adapters may be used to secure conduits to the box. May be concrete encased or buried but not warranted or listed to be watertight for all circumstances.
- 2 in. x 12 in. x 4 in.
- Corrosion resistance and physical properties needed for direct burial applications
- NEMA 6P rating per section 314
- UL E88685
Ceiling Support Boxes are specifically designed for ceiling fan and ceiling or wall light fixture support. #10-32 ceiling fan screw provided and #8-32 ceiling fan fixture mounting screws. Easy installation, up-front ground screw.
- No protruding ground screw or fan mounting screws allows easy installation
- Metal protection plate eliminates debris or damage to wiring
- Easy to follow instructions and mounting hardware included
- Pan cover protects wiring after installation
- Rated 70 lbs. ceiling fan, 150 lbs. fixture support
- UL Listed
The Carlon 1-Gang 18 cu. in. round old work ceiling box is designed for use with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for residential and light commercial applications, the box is made of Polycarbonate, is listed for use with dry wall or sheet rock. The box is fire rated and UL listed for safety.
- 1-gang electrical box houses an installed ceiling switch or receptacle
- Not intended for fixture or support in ceilings
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- Mounting ears and swing clamps provide versatile installation options
- Sized for standard devices and switches
Non-metallic boxes feature PVC construction for easier installation, greater performance and lower installation cost. Designed and listed for use with non-metallic sheathed cable in accordance with Article 314 of the National Electrical Code. They make fast work of any residential or light commercial application.
- Patented design allows for adjustment from 0 in. to 1-3/4 in. after installation
- Ideal for new work or retrofit (old work) applications
- Ideal for various drywall thicknesses and wall finishes
- Designed and listed for use with non-metallic sheathed cable in accordance with article 314 of the national electrical code
- All PVC boxes are permissible for use with 90 degree C connectors
Octagon Boxes are manufactured from durable pre-galvanized steel, and are designed to house and protect electrical wiring, switches, receptacles, and to support light fixtures. All steel octagon boxes are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. 8-32 fixture mounting screws are assembled.
- 4 in. x 2-1/8 in. deep
- Supplied with 5-1/2 in. and 4-3/4 in. knockouts
- Drawn steel construction
- Combination Phillips/slotted screw heads
- 21.5 cu. in. capacity
The 14 cu. in. PVC Old Work Electrical Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. This item is great for light commercial and residential applications. The box is crafted with non-conductive PVC for durability and is fire rated and UL Listed to help ensure safety.
- For residential and commercial old work applications including masonry walls
- Sized for standard devices and switches
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- UL Listed and 2-hour fire rating for safety
RACO KWIK-BRACE is a heavy-duty ceiling fan brace designed for new or existing construction where joists are accessible. Slides apart to accommodate joist spacing from 16" to 24" screws provided. Easy to follow instructions and mounting hardware included.
- #10-32 ceiling fan screws provided and #8-32 ceiling fixture mounting provision, metal protection plate provided
- Nail spurs for easy positioning
- Up-front ground screws for easy installation
- Easy to follow instructions and mounting hardware included
Designed with the electrician in mind. The Original Smart Boxes are unmatched in versatility in new work locations where you cannot swing a hammer or where final wall surfaces are uncertain, like kitchens and baths. They are unmatched in old or retrofit work.
- Available in 1, 2, 3 and 4-gang and horizontal
- Step down feature allows for wire entrance in both top and bottom of box
- Heavy-duty 42 lbs. mounting screws supplied
- Mounts to wood or metal stud 25 g
- Adjustable depth
- Extra thick PVC wall material creates stability and rigidity
- Built-in wire clamps
- All 6/32 device holes are threaded
- RoHS compliant
- UL listed
- Material: PVC
The Carlon Super Blue New Work 1-Gang 18 cu. in. Non-Metallic Hard-Shell Switch and Outlet Box is designed to not break or crack, even in extreme conditions. It is made with thermoplastic PVC for durability. Its hard-shell resists flexing and holds its shape in bad conditions and the box is fire rated and UL listed to help ensure safety.
- For use with existing wall construction or re-models
- Sized for standard devices and switches
- Designed to not break or crack even in extreme environments
- Largest wire-fill capacity in its class
- Captive nails for wood stud mounting
- UL listed
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches, and receptacles. UL Listed and acceptable for use in 2-hour fire rated walls. Device mounting holes pre-tapped to accept 6-32 device screws.
- 3 in. x 2 in. x 2-1/2 in. D
- Can be ganged together to house multiple devices
- L clamps provided for nonmetallic sheathed cable (NMSC)
- Includes plaster ears and clips for cut-in or old work applications
- 12.5 cu. in. capacity
The Carlon Zip Box Blue 3-Gang 55 cu. in. Old Work Non-Metallic Switch and Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the National Electric Code. The product is great for light commercial and residential applications. The box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Sized for standard devices and switches and extra capacity for wiring and larger devices
- Compatible with NMSC
- Thermoplastic construction resists rust and won't conduct electricity
- Mounting ears and swing clamps provide versatile installation options
- Built-in cable clamps hold wires firmly in place
- UL listed and 2-hour fire rating for safety
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches, and receptacles. UL Listed and acceptable for use in 2-hour fire rated walls. Device mounting holes pre-tapped to accept 6-32 device screws.
- 3 in. x 2 in. x 1-1/2 in. Deep
- Non-gangable
- L clamps provided for non-metallic sheathed cable
- Plaster ears for cut-in or old work applications
- 7.5 cu. in. capacity
The Carlon Zip Box Blue 1-Gang 20 cu. in. Old Work Non-Metallic Switch and Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the National Electric Code. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Use for old work applications in residential or commercial remodeling projects
- Designed for use with non-metallic sheathed cable and listed for masonry walls
- Sized for standard devices and switches and extra capacity for wiring and larger devices
- Thermoplastic construction resists rust and will not conduct electricity
- Built-in cable clamps hold wires firmly in place
- Mounting ears, swing bracket and captive nails provide wide range of installation options
- PVC construction is classified for 2-hour fire wall rating
- Meets NEMA OS-2, UL listed UL514C, E11461 and R9140
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled.
- Ideal for exposed work applications
- Combination screw heads allow quick installation
- Drawn construction
- (10) 1/2 in. knockouts and six 3/4 in. knockouts
- UL Listed
- 21.0 cu. in. capacity
- Acceptable in 2-hour fire rated walls
Raco 1-1/2 in. deep ceiling fan rated box is designed, tested, and UL listed for the dynamic loads of ceiling fans. Use this product when replacing an existing ceiling fan. Designed with the installer in mind, and rich in time saving features. A variety of products are available to meet nearly every application. Raco's Insider connector is included for use with non metallic sheathed cable.
- Durable pre-galvanized steel construction
- With proper fitting can be used for conduit, NMSC, armored, metal clad, or flex cable
- Plastic insider provided for nonmetallic sheathed cable
- 15.8 cu. in. capacity
- Maximum support load for ceiling fans 70 lbs. and 110 lbs. at 16 in. for static light fixtures
- Mounting hardware and instructions are included
The Carlon Super Blue New Work Round 14.5 cu. in. Non-Metallic Hard-Shell Ceiling Box is designed to not break or crack, even in extreme conditions. It is made with thermoplastic PVC for durability. Its hard-shell resists flexing and holds its shape in bad conditions and the box is fire rated to help ensure safety.
- Designed to not break or crack, even in extreme environments
- Made of heat-resistant thermoplastic material
- Captive nails for wood stud mounting
- 3/0 and 4/0 mounting holes
- 2-hour fire rating
BELL offers a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. Reinforced connector outlets provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included.
- State of the art powdercoat finish provides maximum weatherability and scratch resistance
- Rugged die cast aluminum construction
- Internal hub threads comply with NEMA requirements and will accept all threaded fittings and threaded conduit
- 8-box mounting options with detachable lugs
- 18.3 cu. in. capacity
- 2 in. deep
- NEMA 3R compliant
The 15.16 cu. in. Round Junction Box with cover is designed for use as a conduit junction box. It is made with non-corrosive PVC for durability and features 4 knockouts with textured lid and a foam in-place gasket. The box is CSA and UL listed for safety.
- 4-knockout type socket openings, 90° spacing
- Non-corrosive, non-conductive PVC construction
- Body hubs are not threaded
- Textured lid with a foam in-place gasket
- CSA and UL listed to help ensure safety
- Comes with 4 stainless steel cover screws
The Carlon Super Blue Old Work 2-Gang 34 cu. in. Non-Metallic Hard-Shell Switch and Outlet Box is designed to not break or crack, even in extreme conditions. It is made with thermoplastic PVC for durability. Its hard-shell resists flexing and holds its shape in bad conditions and the box is fire rated and UL listed to help ensure safety.
- For use with existing construction or existing walls
- Sized for standard devices and switches and extra capacity for wiring or larger devices
- Designed to not break or crack even in extreme environments
- Mounting ears and swing clamps provide versatile installation options
- Captive nails for wood stud mounting
- UL listed
RACO Extension Rings provides additional cubic capacity. Constructed from 1/16 in. pre-galvanized steel. Can be used as an outlet box for surface conduit. .
- Combination screw heads allow quick installation
- Drawn construction
- Eight 1/2 in. knockouts and four 3/4 in. knockouts
- 22.5 cu. In. capacity
The 1-Gang 19 cu. in. Type-FSS FS Box is designed for multiple dead-end circuit terminations and for where more support is needed in stub-up applications. It is made with non-corrosive PVC for durability and features integral mounting feet for easier installation. The box is designed to take standard covers, accessories and devices and is fire rated and UL and CSA Listed for safety.
- For multiple dead-end circuit terminations
- Provides additional support for stub-up applications
- Non-corrosive PVC construction
- Takes standard covers, accessories and devices
- CSA and UL listed and fire rated to help ensure safety
- Integral mounting feet
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled.
- Ideal for exposed work applications
- Combination screw heads allow quick installation
- Drawn construction
- Fifteen 1/2 in. knockouts
- 18.0 cu. in. capacity
- cULus Listed
RACO SADDLE-BOX 7120 series boxes are specifically designed for use in ceiling fan support or heavy lighting fixture applications. The unique U-shaped design allows box to mount on any standard 1-1/2 in. W joist. Fan/Fixture mounting hardware hidden behind protective decal until ready for mounting. Screw heads are not exposed to drywall mud and paint.
- Large 12.5 cu. in. wiring compartment
- For 1/2 in. 5/8 in. or 3/4 in. drywall
- Nonmetallic cable clamps (no need for separate connector)
- UL Listed
Used for convenience outlets, switch boxes or small junction boxes. Popular for exposed work applications. Surface-mounted wiring requires the wiring to be enclosed with a protective covering such as EMT conduit.
- Drawn construction
- (10) 1/2 in. knockouts
- UL Listed
- 13.0 cu. in. capacity
- Raised ground
- Acceptable in 2-hour fire rated walls
Square boxes are manufactured from durable pre-galvanized steel and designed to house and protect electrical wiring, switches, receptacles and to support light fixtures. All steel boxes are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. 8-32 cover mounting screws are assembled.
- 4 in. square x 1-1/2 in. deep
- Welded steel construction with "FS" bracket for wood and metal studs
- "L" clamps provided for non-metallic sheathed cable (NMSC)
- Combination Phillips/slotted screw heads
- 21.0 cu. in. capacity
Used in the installation of ceiling or wall lighting fixtures. Combination screw heads provide for fast installation. Accommodates nonmetallic sheathed cable.
- Combination screw heads allow quick installation
- Drawn construction
- (3) 1/2 in. knockouts
- UL listed
- 15.5 cu. in. capacity
- Not rated for ceiling fans
- Rated to support light fixture up to 50 lbs.
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches, and receptacles. UL Listed and acceptable for use in 2-hour fire rated walls. Device mounting holes pre-tapped to accept 6-32 device screws.
- 3 in. x 2 in. x 2-3/4 in. D
- Six 1/2 in. knockouts
- Plaster ears for cut-in or old work applications
- Gangable option
- 14.0 cu. in. capacity
Manufactured from durable pre-galvanized steel, and are designed to house and protect electrical wiring, switches, and receptacles. Captive device screws. cULus Listed.
- Made from zinc, pre-coated, steel
- Used where fixtures are installed
- 4.0 cu. in. capacity
- cULus Listed
The 90 cu. in. Non-Metallic Floor Box Base allows for various thicknesses of concrete pours. It is made with PVC and features a leveling ring that guarantees a level top, even if the box is tipped slightly during the pouring process. The base is CSA and UL listed and fire rated for safety.
- Minimum concrete depth is 3-1/2 in.
- Durable PVC construction
- Leveling ring ensures a level top during concrete pouring
- 2-1 in. and two 3/4 in. hubs
- Two 1 in. x 3/4 in. and two 3/4 in. x 1/2 in. reducer plugs
- Fire rated and CSA and UL listed to help ensure safety
Single Door Cover for Round Floor Box, Brass for use with GFCI and Duplex Devices. Rugged construction coated with a light lacquer finish for extra protection resistance to wear, suite for high traffic areas. Gasket for watertight applications.
- For use with GFCI and duplex devices
- Gasketed for watertight applications
- UL scrub water tested
- UL E11461
Round Ceiling Pans are manufactured from durable pre-galvanized steel and are designed to house and protect electrical wiring and to support light fixtures. All steel boxes are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. 8-32 cover mounting screws are assembled.
- Rated for 50 lb. fixture support
- "L" clamps provided for non-metallic sheathed cable (NMSC)
- 6.0 cu. in. capacity
- Do not use to support ceiling fans
26 cu. in. Nail-On Vapor-Tight Ceiling Box is designed to meet modern homes energy efficiency requirements. It is crafted with a thermoplastic material for durability. It also features a drywall flange and gaskets that, when combined, provide a vapor-tight seal that prevents air from freely flowing through the box.
- Creates an air seal around the perimeter of the box stopping airflow from entering or exiting the house
- 26 cu. in. capacity to accommodate large devices
- High-strength thermoplastic polymer construction
- Designed to not shatter when cold
- Drywall flange and gaskets will not allow air to freely flow through box
- Fire rated and UL listed for safety
- Angled side nails for easier installation
Square boxes are manufactured from durable pre-galvanized steel and designed to house and protect electrical wiring, switches, receptacles and to support light fixtures. All steel boxes are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. 8-32 cover mounting screws are assembled.
- 4-11/16 in. square x 2-1/8 in. deep
- (4) 3/4 in., four 1 in., one 1/2 in. and three TKO knockouts
- Combination Phillips/slotted screw heads
- Welded steel construction
Use the Old work box support clip to lock steel switch boxes tightly to wall. Can be used on plaster, dry wall, concrete block, brick or concrete. Adapts to any wall thickness up to 3/4 in. Durable steel construction.
- Adapts to any wall thickness up to 3/4 in.
- Clips to plaster, drywall, concrete block, brick or concrete
- For use in old work applications
- UL E13938
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled.
- Ideal for exposed work applications
- Combination screw heads allow quick installation
- Drawn construction
- (16) 1/2 in. knockouts
- 21.0 cu. in. capacity
- Acceptable in 2-hour fire rated walls
The Junction Box provides protection against falling dirt, hose-directed water, external ice formation and the entry of water during prolonged submersion. It is made with plastic and features a gasketed lid attached with stainless-steel screws. The box is UL Listed with a NEMA 6P rating per section 314.29, exception of the NEC.
- For indoor and outdoor use
- Plastic construction
- Gasketed lid attached with stainless-steel screws
- Designed to not rust or corrode
- NEMA type 6P and type 4/4 ratings
- UL listed to help ensure safety
Designed for use in branch circuit wiring in wet, damp or dry locations. Boxes house receptacles, switches and GFCI's. May also be used as a weatherproof junction box. Closure plugs and installation hardware included. Ground screw installed.
- State-of-the-art powdercoat finish provides maximum weatherability and scratch-resistance
- 8-box mounting options with detachable lugs
- 18.3 cu. in. capacity
- NEMA 3R compliant
BELL offers a selection of weatherproof boxes made of rugged, seamless die-cast construction which will not allow entry of moisture. Boxes have reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included. Bilingual instructions provided with every product.
- Rugged die-cast aluminum construction
- State-of-the-art powder coat finish provides maximum weatherability and scratch resistance
- 32.0 cu. in. capacity
- NEMA 3R rated
- 2 in. deep
- 31.0 cubic in. capacity
- NEMA 3R Compliant
Bell offers a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. Boxes have reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included. Bilingual instructions provided with every product.
- Reinforced connector outlets
- 8-box mounting options with detachable lugs
- Internal threads on hubs comply with NEMA requirements
- Hubs accept all threaded fittings and threaded conduit
- State-of-the-art powdercoat finish provides maximum weatherability and scratch resistance
- Rugged diecast aluminum construction
- Ground screw installed
- NEMA 3R rated
- 2 in. deep
- 31.0 cu. in.
- 2 closure plugs included with each box
Provides additional cubic capacity. May be used an outlet box for surface conduit. Constructed from pre-galvanized steel.
- 4 in. x 1-1/2 in. D
- Drawn steel construction
- Supplied with 2-1/2 in. and 2-3/4 in. knockouts
- Combination Phillips/slotted screw heads
- 15.5 cu. in. capacity
The Carlon Zip Box Blue 2-Gang 32 cu. in. Non-Metallic Switch and Outlet Box is designed for use with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for residential and light commercial applications, the box is made with PVC, is listed for use with masonry walls and can be used with 90 degree C conductors. It meets NEMA OS-2 and is fire rated and UL listed for safety.
- Use with switches and outlet devices in new work applications where the wall is not already installed
- Sized for standard devices and switches
- Thermoplastic construction resists rust and won't conduct electricity
- Captive nails included
- UL listed
- 2-hour fire rating
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled. Suitable for use without a bonding jumper in circuits up to 600-Volt.
- Use with AC/MC or flexible cable
- Combination screw heads allow quick installation
- Welded construction
- (3) 1/2 in. knockouts, 1 TKO knockout and 4 cable payouts
- UL Listed
- 21.0 cu. in. capacity
- FS style bracket, flush
Used for convenience outlets, switch boxes or small junction boxes. Popular for exposed work applications. Surface-mounted wiring requires the wiring to be enclosed with a protective covering such as EMT conduit.
- Welded construction
- Eleven 1/2 in. knockouts
- UL Listed
- 11.5 cu. in. capacity
- Acceptable in 2-hour fire rated walls
Designed with the electrician in mind. The Original Smart Boxes are unmatched in versatility in new work locations where you cannot swing a hammer, or where final wall surfaces are uncertain, like kitchens and baths. They are unmatched in old or retro it work applications because they are always mounted to a stud. Before Smart Box all other manufacturers hung their cut boxes on flimsy 3/8 or 1/2 sheet rock, or even worse lathe and plaster. Our Original Smart Boxes are unmatched in adjustability, as they are molded entirely of 1 piece with no moving parts to break or lose.
- Available in 1, 2, 3 and 4-gang, and horizontal
- Step down feature allows for wire entrance in both top and bottom of box
- Heavy duty 42 lbs. mounting screws supplied
- Mounts to wood or metal stud 25 g
- Adjustable depth
- Extra thick PVC wall material creates stability and rigidity
- Built in wire clamps
- All 6/32 device holes are threaded
- RoHS compliant
- UL listed
- Material: PVC
Here is the fastest installation choice where only Low-Voltage is required. Designed to fit a standard 1-Gang faceplate, this Low-Voltage bracket features an easy nail-on mounting or screw-in bracket, while a hard shell provides increased durability and no racking. The resi-rings accept 3/4 in., 1 in. and 1-1/4 in. resi-gard fittings.
- Designed for the installation of low-voltage devices such as a cable television, data communications or telephone jacks
- PVC construction
- Bracket mounts on wood or steel studs
- Backless design accommodates the space and bend radius requirements of coaxial or data/communication cables
- UL Listed
- Breakaway vertical mounting flange allows the use of a low-voltage add-on bracket
Square boxes are manufactured from durable pre-galvanized steel and designed to house and protect electrical wiring, switches, receptacles and to support light fixtures. All steel boxes are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. 8-32 cover mounting screws are assembled.
- 4-11/16 in. square x 2-1/8 in. deep
- (1) 1/2 in. and fifteen TKO knockouts
- Combination Phillips/slotted screw heads
- Welded steel construction