Searched for "39121300"
Used to close an outlet box. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- Flat, 1/2 in. center knockout
- Made of 0.0625 pre-galvanized steel
- cULus Listed
The Carlon 1-Gang 18 cu. in. round old work ceiling box is designed for use with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for residential and light commercial applications, the box is made of Polycarbonate, is listed for use with dry wall or sheet rock. The box is fire rated and UL listed for safety.
- 1-gang electrical box houses an installed ceiling switch or receptacle
- Not intended for fixture or support in ceilings
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- Mounting ears and swing clamps provide versatile installation options
- Sized for standard devices and switches
Used to house wiring devices such as switches or outlets. Acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Nine 1/2 in. knockouts
- UL Listed
- 18.0 cu. in. capacity
- Plaster ears
RACO KWIK-BRACE is a heavy-duty ceiling fan brace designed for new or existing construction where joists are accessible. Slides apart to accommodate joist spacing from 16" to 24" screws provided. Easy to follow instructions and mounting hardware included.
- #10-32 ceiling fan screws provided and #8-32 ceiling fixture mounting provision, metal protection plate provided
- Nail spurs for easy positioning
- Up-front ground screws for easy installation
- Easy to follow instructions and mounting hardware included
Surface mounted enclosure without entrance hubs which allows multiple conduits to be connected and wire splices made within. Appropriate round hole for conduit entrance must be cut. Male adapters or box adapters may be used to secure conduits to the box. May be concrete encased or buried but not warranted or listed to be watertight for all circumstances.
- 2 in. x 12 in. x 4 in.
- Corrosion resistance and physical properties needed for direct burial applications
- NEMA 6P rating per section 314
- UL E88685
Used to house wiring devices such as switches or outlets. Steel boxes are acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Eight 1/2 in. knockouts
- UL listed
- 12.5 cu. in. capacity
- Plaster ears
Ceiling Support Boxes are specifically designed for ceiling fan and ceiling or wall light fixture support. #10-32 ceiling fan screw provided and #8-32 ceiling fan fixture mounting screws. Easy installation, up-front ground screw.
- No protruding ground screw or fan mounting screws allows easy installation
- Metal protection plate eliminates debris or damage to wiring
- Easy to follow instructions and mounting hardware included
- Pan cover protects wiring after installation
- Rated 70 lbs. ceiling fan, 150 lbs. fixture support
- UL Listed
Used to mount 2-devices, such as switches or receptacles. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- 1/2 in. raised, drawn
- May use low voltage partition to conduit type boxes to divide power from voice/data
- UL Listed, CSA
- 5.5 cu. in. capacity
The 14 cu. in. PVC Old Work Electrical Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. This item is great for light commercial and residential applications. The box is crafted with non-conductive PVC for durability and is fire rated and UL Listed to help ensure safety.
- For residential and commercial old work applications including masonry walls
- Sized for standard devices and switches
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- UL Listed and 2-hour fire rating for safety
The Vertical 34 cu. in. PVC 2-Gang Wall Box Adjust-a-box with Adjustable Bracket for Vertical Mount is designed to allow adjustment of depth after the wall covering has been installed. Adjusts to any wall covering. Designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety. Includes integral clamp for 220-Volt power.
- Use with non-metallic sheathed cable in accordance with article 314 of the NEC
- Thermoplastic construction resists rust and won't conduct electricity
- Convenient adjustable bracket for ease of installation
- Metal stud bracket offers 0 in. to 1-3/4 in. adjustability
- Includes mounting hardware
- Meets NEMA OS-2
- UL listed and 2 hour fire rating for safety
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches, and receptacles. UL Listed and acceptable for use in 2-hour fire rated walls. Device mounting holes pre-tapped to accept 6-32 device screws.
- 3 in. x 2 in. x 1-1/2 in. Deep
- Non-gangable
- L clamps provided for non-metallic sheathed cable
- Plaster ears for cut-in or old work applications
- 7.5 cu. in. capacity
Raco 1-1/2 in. deep ceiling fan rated box is designed, tested, and UL listed for the dynamic loads of ceiling fans. Use this product when replacing an existing ceiling fan. Designed with the installer in mind, and rich in time saving features. A variety of products are available to meet nearly every application. Raco's Insider connector is included for use with non metallic sheathed cable.
- Durable pre-galvanized steel construction
- With proper fitting can be used for conduit, NMSC, armored, metal clad, or flex cable
- Plastic insider provided for nonmetallic sheathed cable
- 15.8 cu. in. capacity
- Maximum support load for ceiling fans 70 lbs. and 110 lbs. at 16 in. for static light fixtures
- Mounting hardware and instructions are included
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches and receptacles. UL Listed and acceptable for use in 2-hour fire rated walls and ceilings. Device mounting holes are pre-tapped to accept device fasteners.
- Raised 1/2 in.
- 2-device cover
- Key-hole allows for installation of cover without removing the box screws
- 5.5 cu. in. capacity
Bell Cluster Covers designed to provide weatherproof protection for outdoor applications. Provides convenience for mounting lampholders and accessories. Installation hardware, gasket, and multilingual instructions are included.
- Rugged diecast construction
- State-of-the-art powder coat finish provides maximum weatherability and scratch resistance
- No closure plugs included
- UL recognized
Used for convenience outlets, switch boxes or small junction boxes. Popular for exposed work applications. Surface-mounted wiring requires the wiring to be enclosed with a protective covering such as EMT conduit.
- Drawn construction
- (10) 1/2 in. knockouts
- UL Listed
- 13.0 cu. in. capacity
- Raised ground
- Acceptable in 2-hour fire rated walls
Provides weatherproof protection when an outlet is in use. Made from high-impact polycarbonate construction providing maximum durability. An attached gasket, mounting hardware and installation instructions included.
- Quick-fit keyhole mounting system allows cover installation under a minute
- Pre-configured for GFCI with patented knock-out technology for alternate devices
- Lockable tab
- 16-in-1 configurations
- Horizontal or vertical mount
- NEMA 3R compliant
We offer a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. The boxes have reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included. Bilingual instructions provided with every product.
- Rugged diecast aluminum construction
- State-of-the-art powder coat finish provides maximum weatherability and scratch resistance
- 16.0 cu. in. capacity
- NEMA 3R rated
The Carlon Zip Box Blue 2-Gang 25 cu. in. Old Work Non-Metallic Switch and Outlet Box are designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Residential and commercial use
- Use with non-metallic cable on accordance with code
- Thermoplastic construction resists rust and won't conduct electricity
- Mounting ears and swing clamps provide versatile installation options
- Sized for standard devices and switches and extra capacity for wiring and/or larger devices
- Built-in cable clamps hold wires firmly in place
- For safety, product is UL listed and fire rated
Manufactured from durable pre-galvanized steel. UL and CSA Listed. Captive device screws.
- Cover made from zinc, pre-coated, steel
- Houses duplex receptacle
- Cover includes captive mounting screws
- Meets UL and CSA compliance
BELL offers a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. Reinforced connector outlets provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included.
- State of the art powdercoat finish provides maximum weatherability and scratch resistance
- Rugged die cast aluminum construction
- Internal hub threads comply with NEMA requirements and will accept all threaded fittings and threaded conduit
- 8-box mounting options with detachable lugs
- 18.3 cu. in. capacity
- 2 in. deep
- NEMA 3R compliant
Used to house wiring devices such as switches or outlets. Steel boxes are acceptable for use in 2-hour fire rated walls. Gangable option.
- Used with nonmetallic sheathed cable
- Gangable
- (7) 1/2 in. knockouts
- UL Listed, CSA
- 18.0 cu. in. capacity
- Plaster ears
BELL products provide weatherproof protection when box is used for junction. Flat face profile. Includes gasket, mounting hardware and installation instruction.
- State-of- the-art powder coat finish provides maximum weatherability and scratch resistance
- Rugged metallic construction
- Device mount
- NEMA 3R compliant
Ceiling support boxes are designed for ceiling fans and ceiling or wall light fixture support. To be directly mounted to a joist. #10-32 ceiling fan and #8-32 provision for fixture mounting screws. Easy installation, up-front ground screw.
- No protruding ground screw or fan mounting screws
- Metal protection plate eliminates debris or damage to wiring
- INSIDER nonmetallic sheathed cable connector included
- 70 lbs. ceiling fan, 150 lbs. fixture support
- Easy-to-follow instructions and mounting hardware included
- 1-1/2 in. deep
- 1/2 in. side knockout
Designed to provide weatherproof protection when a box is being used for junction. Flat face profile. Gasket, mounting hardware and installation instructions included.
- Rugged die-cast construction
- State-of-the-art powder coat finish provides maximum weatherability and scratch resistance
- Flat, blank cover
- Horizontal or vertical mount
- Gray
- NEMA 3R rated
Designed with the electrician in mind. The Original Smart Boxes are unmatched in versatility in new work locations where you cannot swing a hammer or where final wall surfaces are uncertain, like kitchens and baths. They are unmatched in old or retro it work applications because they are always mounted to a stud. Before Smart Box all other manufacturers hung their cut boxes on flimsy 3/8 or 1/2 sheet rock or even worse lathe and plaster. Our Original Smart Boxes are unmatched in adjustability, as they are molded entirely of 1-piece with no moving parts to break or lose.
- Available in 1, 2, 3 and 4-gang and horizontal
- Step down feature allows for wire entrance in both top and bottom of box
- Heavy-duty 42 lbs. mounting screws supplied
- Mounts to wood or metal stud 25 g
- Adjustable depth
- Extra thick PVC wall material creates stability and rigidity
- Built-in wire clamps
- All 6/32 device holes are threaded
- RoHS compliant
- UL listed
- Material: PVC
The Carlon Zip Box Blue 1-Gang 20 cu. in. Old Work Non-Metallic Switch and Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the National Electric Code. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Use for old work applications in residential or commercial remodeling projects
- Designed for use with non-metallic sheathed cable and listed for masonry walls
- Sized for standard devices and switches and extra capacity for wiring and larger devices
- Thermoplastic construction resists rust and will not conduct electricity
- Built-in cable clamps hold wires firmly in place
- Mounting ears, swing bracket and captive nails provide wide range of installation options
- PVC construction is classified for 2-hour fire wall rating
- Meets NEMA OS-2, UL listed UL514C, E11461 and R9140
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled.
- Ideal for exposed work applications
- Combination screw heads allow quick installation
- Drawn construction
- (10) 1/2 in. knockouts and six 3/4 in. knockouts
- UL Listed
- 21.0 cu. in. capacity
- Acceptable in 2-hour fire rated walls
Weatherproof device covers are designed to provide protection for an outdoor receptacle. Covers have a self-closing lid. Covers mount to device.
- Self-closing lids provides protection when receptacle is not in use
- State-of-the-art powder coat finish provides maximum weatherability and scratch resistance
- GFCI
- Vertical mount
- Rugged metallic construction
- NEMA 3R compliant
- Installation hardware, gasket and multilingual instructions are included
Surface covers used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications. Required hardware for mounting the receptacle is provided. Installation instructions are preprinted on the polybag for convenience.
- Raised 1/2 in.
- 1.406 in. Dia receptacle
- 6.5 cu. in. capacity
- Meets 2014 NEC Article 250.16 (A)
Ceiling Box Cover used to cover unused 3-1/2 in. and 4 in. round and octagonal boxes prior to the installation of a fan or fixture. It has a deep cover that works with pan boxes without the need to cut the post. It is an attractive cover and the screws don't show on the ceiling.
- Bracket has 2 separate cover mounting options, threaded post pushes in for flat ceilings or screws on for textured/uneven ceilings
- Use #8 screws provided or back out existing screws to accept notched bracket
- Plastic eliminates the scratches you get with painted metal covers
- Covers poorly cut drywall
- Non-rusting, paintable plastic
The Carlon Zip Box Blue 3-Gang 55 cu. in. Old Work Non-Metallic Switch and Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the National Electric Code. The product is great for light commercial and residential applications. The box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Sized for standard devices and switches and extra capacity for wiring and larger devices
- Compatible with NMSC
- Thermoplastic construction resists rust and won't conduct electricity
- Mounting ears and swing clamps provide versatile installation options
- Built-in cable clamps hold wires firmly in place
- UL listed and 2-hour fire rating for safety
Universal 1-Gang Shallow In-Use Extra Duty cover allows extension cords to be covered while in use. Meets stringent extra duty requirements as required by the NEC. Non-metallic material is paintable to match any household decor.
- Shallow 2-7/8 in. inside depth
- Wasp guard
- Stainless steel hinge pin
- Mounts horizontal or vertical
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches, and receptacles. UL Listed and acceptable for use in 2-hour fire rated walls. Device mounting holes pre-tapped to accept 6-32 device screws.
- 3 in. x 2 in. x 2-1/2 in. D
- Can be ganged together to house multiple devices
- L clamps provided for nonmetallic sheathed cable (NMSC)
- Includes plaster ears and clips for cut-in or old work applications
- 12.5 cu. in. capacity
The Super Blue New Work 1-Gang 22 cu. in. Non-Metallic Hard-Shell Switch and Outlet Box is designed to not break or crack, even in extreme conditions. It is made with thermoplastic PVC for durability. Its hard-shell resists flexing and holds its shape in bad conditions and the box is fire rated and UL listed to help ensure safety.
- Use in new construction applications
- Sized for standard devices and switches and extra capacity for wiring and/or larger devices
- Designed to not break or crack, even in extreme environments
- Captive nails for wood stud mounting
- UL listed
- 2-hour fire rating
Surface covers used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications. Exposed work covers are 1/2 in. raised. Complies with 2020 NEC Article 250.146 (A) and cULus Listed.
- Driven screws and break-off lock nuts included
- Meets the requirements of the 2020 NEC article 250.146 (A)
- 6.5 cu. in. capacity
- Hardware installation instructions preprinted on packaging
Manufactured from durable pre-galvanized steel and designed to house and protect electrical wiring, switches, and receptacles in surface mounted or exposed work applications. All steel covers are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. Mounting provisions are designed to make installation efficient.
- Durable pre-galvanized steel construction
- Includes required hardware for mounting the devices
- Duplex and toggle switch adapter plates provide flexibility during cover installation
- 6.5 cu. in. capacity
The round cover provides a weatherproof and watertight seal when in use with a 4 in. electrical conduit body or tee box. Made of durable PVC construction, this cover is non-corrosive and non-conductive ideal for outdoor applications. The cover comes with stainless steel screws.
- Use to cover a 4 in. round electrical box
- Durable PVC construction
- UL approved for outdoor applications
- Will not rust or corrode
- Can be painted
- Includes 4 stainless steel screws and neoprene gasket
Adjustable Bar Hanger allows box to be placed between ceiling joists or wall studs quickly and easily. Park in place barbs are inserted into joist prior to screw installation. Includes a stud to accommodate fixture stem.
- Bar hanger adjusts 14-1/2 in. to 22-1/2 in.
- Box mounts bar thru center 1/2 in. knockout
- Bar hanger does not include box
- Clip installs in 1/2 in. knockout in bottom (back) of box
We are proud to offer a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. The boxes have reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included. Bilingual instructions provided with every product.
- Reinforced connector outlet
- 8-box mounting options with detachable lugs
- Internal threads on hubs comply with NEMA requirements
- Hubs accept all threaded fittings and threaded conduit
- State-of-the-art powdercoat finish provides maximum weatherability and scratch resistance
- Rugged diecast aluminum construction
- Ground screw installed
- NEMA 3R rated
- 2-5/8 in. deep
- 36.0 cu. in.
- 2 closure plugs included with each box
Small surface metal raceway systems are the ideal choice for a homeowner that wants to extend circuits or communication cabling in their home. Surface metal raceway allows you to extend circuits, add fixtures or outlets without disturbing the drywall, plaster or insulation in your home. All parts are paintable to blend with room decor. The leading choice of professionals is now available for your DIY project.
- Solid base fan box is used for mounting a ceiling fan when extending an electrical circuit from an existing switch or receptacle
- Base has two 1/2 in. trade sized knockouts
- Ivory finish
- Paintable and stainable using latex based products
- UL listed
Here is the fastest installation choice where only Low-Voltage is required. Designed to fit a standard 1-Gang faceplate, this Low-Voltage bracket features an easy nail-on mounting or screw-in bracket, while a hard shell provides increased durability and no racking. The resi-rings accept 3/4 in., 1 in. and 1-1/4 in. resi-gard fittings.
- Designed for the installation of low-voltage devices such as a cable television, data communications or telephone jacks
- PVC construction
- Bracket mounts on wood or steel studs
- Backless design accommodates the space and bend radius requirements of coaxial or data/communication cables
- UL Listed
- Breakaway vertical mounting flange allows the use of a low-voltage add-on bracket
In-Use Device Covers provide weatherproof protection when an outlet is in use. Made are made from high-impact polycarbonate construction providing maximum durability. An attached gasket, mounting hardware, and installation instructions are included.
- Patented quick-fit keyhole Mounting system allows cover installation under a minute
- Pre-configured for GFCI with patented knock-out technology for alternate devices
- Lockable tab (1/8 in. shackle)
- Extra duty rated
- 55-in-1 configurations
- 2-3/4 in. D
- NEMA 3R compliant
26 cu. in. Nail-On Vapor-Tight Ceiling Box is designed to meet modern homes energy efficiency requirements. It is crafted with a thermoplastic material for durability. It also features a drywall flange and gaskets that, when combined, provide a vapor-tight seal that prevents air from freely flowing through the box.
- Creates an air seal around the perimeter of the box stopping airflow from entering or exiting the house
- 26 cu. in. capacity to accommodate large devices
- High-strength thermoplastic polymer construction
- Designed to not shatter when cold
- Drywall flange and gaskets will not allow air to freely flow through box
- Fire rated and UL listed for safety
- Angled side nails for easier installation
The Super Blue New Work 2-Gang 35 cu. in. Non-Metallic Hard-Shell Switch and Outlet Box is designed to not break or crack, even in extreme conditions. It is made with thermoplastic PVC for durability. Its hard shell resists flexing and holds its shape in bad conditions, and the box is fire rated and UL listed to help ensure safety.
- For use in new construction where the walls have not been closed in with wallboard
- Sized for standard devices and switches and extra capacity for wiring or larger devices
- Designed to not break or crack even in extreme environments
- Captive nails for easy installation
- UL listed and two hour fire rating
High impact resistant thermoplastic Round Floor Box cover. Non-Metallic, for use with Duplex Devices. Compatible with standard NEMA duplex and 1-1/2 in. NPS receptacles.
- Compatible with standard NEMA duplex and 1-1/2 in. NPS receptacles
- Approved for all types of finish flooring
- UL scrub water tested
- UL E11461
The Zip Box Blue 1-Gang 8 cu. in. Non-Metallic Switch and Outlet Box are great for light commercial and residential applications. It is made with non-conductive PVC for durability and features a molded-on PVC bracket for easier installation. The box is designed for use with non-metallic sheathed cable in accordance with article 314 of the NEC and is UL listed and fire rated for safety.
- Great for light commercial and residential use
- Use with non-metallic sheathed cable in accordance with article 314 of the NEC
- Non-conductive PVC construction
- UL listed and fire rated to help ensure safety
- Molded-on PVC bracket
Weatherproof device covers are designed to provide protection for an outdoor receptacle. Covers have a self-closing lid. Covers mount to device.
- Self-closing lids provide weatherproof protection when the receptacle is not in use
- State-of-the-art powder coat finish provides maximum weatherability and scratch resistance
- GFCI
- Horizontal mount
- Rugged metallic construction
- NEMA 3R compliant
- Installation hardware, gasket and multilingual instructions are included
Carlon Vertical Mount Gray 1 Toggle Switch Box Cover. Made of Polycarbonate that is UV resistant. Cover is paintable with a textured surface to hid scratches.
- 3 in. W for use as a cover for a standard receptacle box
- Non-metallic, PVC construction for extra strength and durability
- Paintable with a textured surface to hide scratches
- Weatherproof cover can be used outdoors and in wet and damp locations
- UV resistant and will not rust or fade
- CSA and UL listed