Electrical Boxes, Covers & Accessories
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled. Suitable for use without a bonding jumper in circuits up to 600-Volt.
- Combination screw heads allow quick installation
- Welded construction
- (8) 1/2 in. knockouts and four TKO knockouts
- UL Listed
- 30.3 cu. in. capacity
- Raised ground
- Acceptable in 2-hour fire rated walls
Used to close an outlet box. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- Flat, 1/2 in. center knockout
- Made of 0.0625 pre-galvanized steel
- cULus Listed
The 14 cu. in. PVC Old Work Electrical Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. This item is great for light commercial and residential applications. The box is crafted with non-conductive PVC for durability and is fire rated and UL Listed to help ensure safety.
- For residential and commercial old work applications including masonry walls
- Sized for standard devices and switches
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- UL Listed and 2-hour fire rating for safety
Ceiling Box Cover used to cover unused 3-1/2 in. and 4 in. round and octagonal boxes prior to the installation of a fan or fixture. It has a deep cover that works with pan boxes without the need to cut the post. It is an attractive cover and the screws don't show on the ceiling.
- Bracket has 2 separate cover mounting options, threaded post pushes in for flat ceilings or screws on for textured/uneven ceilings
- Use #8 screws provided or back out existing screws to accept notched bracket
- Plastic eliminates the scratches you get with painted metal covers
- Covers poorly cut drywall
- Non-rusting, paintable plastic
Used to house wiring devices such as switches or outlets. Acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Nine 1/2 in. knockouts
- UL Listed
- 18.0 cu. in. capacity
- Plaster ears
Used to close an outlet box. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slots compensate up to 12 degree for box misalignment
- Flat, blank
- Made from zinc, pre-coated, steel
- cULus
Used to house wiring devices such as switches or outlets. Steel boxes are acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Eight 1/2 in. knockouts
- UL listed
- 12.5 cu. in. capacity
- Plaster ears
Used for convenience outlets, switch boxes or small junction boxes. Popular for exposed work applications. Surface-mounted wiring requires the wiring to be enclosed with a protective covering such as EMT conduit.
- Drawn construction
- (10) 1/2 in. knockouts
- UL Listed
- 13.0 cu. in. capacity
- Raised ground
- Acceptable in 2-hour fire rated walls
The Vertical 21 cu in. PVC 1-Gang Wall Box Adjust-a-box with Adjustable Bracket for Vertical Mount is designed to allow adjustment of depth after the wall covering has been installed. Adjusts to any wall covering. The Zip Box Blue 1-Gang 20 cu. in. Old Work Non-Metallic Switch and Outlet Box are designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Typical uses are in kitchens and bathrooms
- Protects indoor wiring from impacts, dust and wear
- Thermoplastic construction resists rust and won't conduct electricity
- Mounts to standard wood or metal stud horizontally
- Convenient adjustable bracket for ease of installation
- UL Listed
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8 to 32 cover mounting screws assembled.
- TKO knockout design provides installation flexibility
- Combination screw heads allow quick installation
- Welded construction
- Ten 1/2 in. KNOCK OUT and 6 TKO KNOCK OUT
- UL Listed
- 21.0 cu. in. capacity
- Raised ground
- Acceptable in 2-hour fire rated walls
BELL offers a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. Reinforced connector outlets provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included.
- State of the art powdercoat finish provides maximum weatherability and scratch resistance
- Rugged die cast aluminum construction
- Internal hub threads comply with NEMA requirements and will accept all threaded fittings and threaded conduit
- 8-box mounting options with detachable lugs
- 18.3 cu. in. capacity
- 2 in. deep
- NEMA 3R compliant
The Carlon Zip Box Blue 1-Gang 20 cu. in. Non-Metallic Ceiling Box is designed for use with non-metallic sheathed cable in accordance with Article 314 of the National Electric Code. Great for residential and light commercial applications, the box is made with polycarbonate, is listed for use with masonry walls and can be used with 90 degree C-conductors. It meets NEMA OS-2 and is fire rated and UL listed for safety.
- Use to support fixtures up to 50 lbs.
- Not intended for fan support
- Thermoplastic construction resists rust and won't conduct electricity
- Installs with captive nails, ground lug and screw (included)
- Built-in cable clamps hold wires firmly in place
- UL listed
The Carlon 1-Gang 18 cu. in. round old work ceiling box is designed for use with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for residential and light commercial applications, the box is made of Polycarbonate, is listed for use with dry wall or sheet rock. The box is fire rated and UL listed for safety.
- 1-gang electrical box houses an installed ceiling switch or receptacle
- Not intended for fixture or support in ceilings
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- Mounting ears and swing clamps provide versatile installation options
- Sized for standard devices and switches
The Carlon Zip Box Blue 2-Gang 25 cu. in. Old Work Non-Metallic Switch and Outlet Box are designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Residential and commercial use
- Use with non-metallic cable on accordance with code
- Thermoplastic construction resists rust and won't conduct electricity
- Mounting ears and swing clamps provide versatile installation options
- Sized for standard devices and switches and extra capacity for wiring and/or larger devices
- Built-in cable clamps hold wires firmly in place
- For safety, product is UL listed and fire rated
Designed to provide weatherproof protection when a box is being used for junction. Flat face profile. Gasket, mounting hardware and installation instructions included.
- Rugged die-cast construction
- State-of-the-art powder coat finish provides maximum weatherability and scratch resistance
- Flat, blank cover
- Horizontal or vertical mount
- Gray
- NEMA 3R rated
Provides weatherproof protection when an outlet is in use. Made from high-impact polycarbonate construction providing maximum durability. An attached gasket, mounting hardware and installation instructions included.
- Quick-fit keyhole mounting system allows cover installation under a minute
- Pre-configured for GFCI with patented knock-out technology for alternate devices
- Lockable tab
- 16-in-1 configurations
- Horizontal or vertical mount
- NEMA 3R compliant
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled.
- Ideal for exposed work applications
- Combination screw heads allow quick installation
- Drawn construction
- (10) 1/2 in. knockouts and six 3/4 in. knockouts
- UL Listed
- 21.0 cu. in. capacity
- Acceptable in 2-hour fire rated walls
Surface covers used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications. Exposed work covers are 1/2 in. raised. Complies with 2020 NEC Article 250.146 (A) and cULus Listed.
- Driven screws and break-off lock nuts included
- Meets the requirements of the 2020 NEC article 250.146 (A)
- 6.5 cu. in. capacity
- Hardware installation instructions preprinted on packaging
TAYMAC in-use device covers provide weatherproof protection when an outlet is in use. In-use covers are made are made from high-impact polycarbonate construction providing maximum durability. An attached gasket, mounting hardware and installation instructions are included.
- Patented quick-fit keyhole mounting system allows cover installation under a minute
- Pre-configured for GFCI with patented knock-out technology for alternate devices
- Horizontal or vertical mount
- Lockable tab (1/4 in. shackle)
- 16-in-1 configurations
- 2-3/4 in. deep
- NEMA 3R compliant
The 1-Gang 20 cu. in. New Work Ceiling Box with Large Hanger Bar is made of non-metallic Polycarbonate making it durable and long-lasting. The box can be used in residential or light commercial applications, suitable for use with a fixture up to 50 lbs.
- Designed for use with fixtures in residential or light commercial application
- listed for fixture support up to 50 lbs.
- Not listed for use with ceiling fans
- Non-metallic polycarbonate is non-conducive and heat, fire and corrosion resistant
- Fixture spacing at 2-3/4 in. and 3-1/2 in.
- Adjustable 14-3/8 in. to 22-1/2 in. bar
- UL listed
Used to mount 2-devices, such as switches or receptacles. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- 1/2 in. raised, drawn
- May use low voltage partition to conduit type boxes to divide power from voice/data
- UL Listed, CSA
- 5.5 cu. in. capacity
RACO KWIK-BRACE is a heavy-duty ceiling fan brace designed for new or existing construction where joists are accessible. Slides apart to accommodate joist spacing from 16" to 24" screws provided. Easy to follow instructions and mounting hardware included.
- #10-32 ceiling fan screws provided and #8-32 ceiling fixture mounting provision, metal protection plate provided
- Nail spurs for easy positioning
- Up-front ground screws for easy installation
- Easy to follow instructions and mounting hardware included
Surface mounted enclosure without entrance hubs which allows multiple conduits to be connected and wire splices made within. Appropriate round hole for conduit entrance must be cut. Male adapters or box adapters may be used to secure conduits to the box. May be concrete encased or buried but not warranted or listed to be watertight for all circumstances.
- 2 in. x 12 in. x 4 in.
- Corrosion resistance and physical properties needed for direct burial applications
- NEMA 6P rating per section 314
- UL E88685
Bell Weatherproof covers designed to expand from an inch to 3" while an outlet is in use. EXTRA DUTY rated. An attached gasket, mounting hardware and installation instructions included.
- Quick-fit keyhole mounting system allows cover installation under a minute
- Clear window allows for quick/easy visual inspection
- 100% paintable surface
- 16-in-1 configurations
- NEMA 3R compliant
- EXTRA DUTY rated