This wire connector is yellow in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.

• Temperature rating 105 degree C (221 degree F)
• Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
• Zinc plated square wire spring
• No pre-twisting required, push stripped conductors into connector and screw on

This wing-type wire connector is red in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.

• Temperature rating 105 degree C (221 degree F)
• Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
• Zinc plated square wire spring
• No pre-twisting required, push stripped conductors into connector and screw on
• Maximum AWG: 5#12

This wire connector is red in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.

• Temperature rating 105 degree C (221 degree F)
• Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
• Zinc plated square wire spring
• No pre-twisting required, push stripped conductors into connector and screw on

This wire connector is red in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.

• Temperature rating 105 degree C (221 degree F)
• Flame retardant - thermoplastic shell provides excellent electrical insulation
• Fixed, precise square wire spring provides more securely gripping on conductors
• Sure-grip ribs improve gripping ability and comfort
• Minimum AWG 1#18 with1#20 - maximum AWG 4 #16 with1 #20

This wing-type wire connector is tan in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.

• Tough thermoplastic, UL 94-Volt 2 flame-retardant shell
• Zinc plated square wire spring
• No pre-twisting required, push stripped conductors into connector and screw on
• Rated to 600-Volt maximum in building wiring and 1000-Volt maximum in lighting fixtures and signs
• Minimum AWG 3 #22 - maximum AWG 3 #10

Use the IDEAL NOALOX 4 oz. Anti-Oxidant Compound to improve the efficiency of aluminum conductor connections. This compound provides additional inner-strand and inner-conductor current paths. For use with pressure type wire connectors including screw-on, tap, service entrance and split-bolts.

• Anti-oxidant and anti-seizing compound improves efficiency and service life of aluminum electrical applications
• Suspended zinc particles penetrate and cut aluminum oxide
• Provides additional inner-strand and inner-conductor current paths for improved conductivity and cooler connections
• Reduces galling and seizing on aluminum conduit joints to promote good ground continuity

MagnaLug Inverter Connector 4 Gauge. Can be crimped or soldered , tab length .67", tab width .21", thickness .15"

This wing-type wire connector is yellow in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.

• Tough thermoplastic, UL 94-Volt 2 flame-retardant shell
• Zinc plated square wire spring
• Rated to 600-Volt maximum in building wiring and 1000-Volt maximum in lighting fixtures and signs
• No pre-twisting required, push stripped conductors into connector and screw on

This wire connector is red in color. It is UL listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.

• Flame retardant - thermoplastic shell provides excellent electrical insulation
• Fixed, precise square wire spring provides more securely gripping on conductors
• Sure-grip ribs improve gripping ability and comfort
• Deep skirt entry provides protection from flashover and shorts

Blackburn Dual-Rated Mechanical Connector. Type ADR-ALCUL 2-Conductor, 1-hole Mount, Conductor. Wire range 14 AWG-2/0 Str. Connector is made a tin-plated aluminum.

• Easy installation
• Dual-rated mechanical connector
• 1/4 in.
• UL E9809

This wire connector is orange in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.

• Temperature rating 105 degree C (221 degree F)
• Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
• Zinc plated square wire spring
• No pre-twisting required, push stripped conductors into connector and screw on

This wire connector is blue in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.

• Temperature rating 105 degree C (221 degree F)
• Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
• Zinc plated square wire spring
• No pre-twisting required, push stripped conductors into connector and screw on
• Minimum AWG 1 #18 W/1 #20 - maximum AWG 4 #16 W/1 #20

This wing-type ground wire connector is green in color. It is UL Listed for pressure type grounding connectors. It can be sued on solid copper to copper wire combinations only.

• Tough thermoplastic, UL 94-Volt 2 flame-retardant shell
• Color-coded green for quick identification
• No pre-twisting required, push stripped conductors into connector and screw on
• Designed for making positive ground connections and bonding non-metallic sheathed cable

This wing-type wire connector is blue in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.

• Flame retardant - thermoplastic shell provides excellent electrical insulation
• Fixed, precise square wire spring provides more securely gripping on conductors
• Sure-grip ribs improve gripping ability and comfort
• Deep skirt entry provides protection from flashover and shorts

• Helps Secure Pump Wire Leads To Cable
• Self-Sealing Tubing Provides Quick, Leak-Proof Splicing
• Connects #14, #12 Or #10 Gauge Wire with Crimp Connectors
• For Splices Exposed To Sunlight

Save time on the job and experience your fastest wire connections with our single-step In-Sure Push-In Wire Connectors. This no-twist wire connector's low insertion force and ergonomic design reduces fatigue in your hands and wrists, helping you power through your jobs without the strain. Get visual confirmation that your connections are secure with the clear polycarbonate shell, while the color-coded design improves your productivity with easy port identification. This versatile wire connector is listed for use with 12-20 AWG solid wires, 12-16 AWG stranded wires, and 12 AWG copper-clad aluminum wires. Its compact size seamlessly fits into any box making these a top choice for lighting installations, prefabricated wiring systems, and other branch circuit wiring applications. Work with a new level of confidence knowing that these durable push-in connectors have CSA certification and are UL-listed to safely support up to 600V. In-Sure Push-In Wire Connectors-Giving you the push you need to get the job done faster.

• A MORE COMFORTABLE CONNECTION: Ergonomic design for easy grip and comfortable installation
• LESS HAND & WRIST STRAIN: Low insertion force for fast and easy connections
• DURABLE DESIGN: UL 94V-2 flame-retardant shell rated at 221°F(105°C)
• VOLTAGE RATING: Rated to 600V
• ADAPTABLE FOR ANY JOB: Approved for bonding and grounding applications
• INCREASED EFFICIENCY: Color-coded housing provides easy identification of port sizes
• PACKAGE INCLUDES: In-Sure Push-In Wire Connector, 2-Port, Bag of 100

This set of wire connectors includes 5-red wire connectors, 6-yellow wire connectors, 6-tan wire connectors, 4-blue wire connectors and 3-gray wire connectors. It is UL Listed for pressure type wire connectors. It can be used on solid and/or stranded copper wires.

• Temperature rating 105 degree C (221 degree F)
• Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
• Zinc plated square wire spring
• No pre-twisting required, push stripped conductors into connector and screw on

The improved 3M O/B plusConnector will help electricians do more with less. The O/B plus connector combines a very small shell with an increased wire range. The improved spring bites wire quickly with less effort and accommodates from two #22 AWG wires up to three #12 AWG wires or four #14 AWG wires. The very small shell fits easily into tight spaces and its flexible skirt helps protect workers from contact with over stripped wires. With such a wide wire range, you can save money by buying fewer connectors. O/B + replaces the orange, blue and gray spring connector style connectors, as well as 70% of the yellow spring connector and wing style connectors. This simplifies selection of the right connector for a wide range of wiring jobs. There's also less inventory to manage and a better chance you'll have the connector you need to do every job.

• Offers a strong bite in a pigtail application so you get a long-lasting connection
• Expandable spring lets you take in more wire uptake and reuse
• O/B+ is dual color-coded so this 1 connector replaces your traditional orange and blue connectors
• Great for all types of jobs - from industrial and residential construction, to automotive, marine and appliance applications
• Use with copper conductors ranging from 22 to 12 AWG
• Orange/blue connector is flame-retardant and operates in temperatures up to 221 degree F (105 degree C)
• Use on building wire rated 600-Volt and on signs, fixtures or luminaires rated 1000-Volt
• UL Listed and CSA certified
• Connectors come 100/pouch

Wago Lever Nuts 2 Wire Inline Splicing Connectors,. Wago Lever Nuts 2 Wire Inline Splicing Connectors. Connects Wire Conductors From 24 To 12 AWG. For Use With Solid, Stranded Or Fine Stranded Conductors. Simple Wire Splicing - Pull Lever Up, Insert Conductor, Push Lever Back Down. Transparent Housing. Mfg #02212401K000004. Mfg #02212401K000004

• Wago Lever Nuts 2 Wire Inline Splicing Connectors
• Connects Wire Conductors From 24 To 12 AWG
• For Use With Solid, Stranded Or Fine Stranded Conductors
• Simple Wire Splicing - Pull Lever Up, Insert Conductor, Push Lever Back Down

This kit contains heavy wall adhesive lined, flexible cross-linked polyolefin heat shrinkable tubing. Designed for the new smaller O.D. lead wire being used on submersible pump motors. This tubing is suitable for applications up to 600-Volt providing excellent waterproof insulating and environmental sealing protection for connections. High impact and abrasion resistance of this heavy wall tubing provides the highest level of mechanical durability. When heated above 250 degree F (120 degree C) there is a 3:1 shrink ratio. Tubing will shrink unrestricted to 33% of its original diameter, the recovered wall thickness of the tubing is proportional to the degree of recovery (approximately 0.08 in./2 mm when fully recovered).

• For splicing #14, #12, #10 cable to 3-wire submersible pump motors
• Will work with newer smaller diameter submersible lead wires
• Shrinks to a durable abrasion resistant skin tight fit
• When heated above 250 degree F (120 degree C) tubing shrinks forcing adhesive to flow which forms a permanent non drying waterproof barrier that remains flexible
• Fast recovery heat shrink tubing

Insulated female disconnects leave turned up edges for increased retention, safety and reliability. Electro-tin-plated copper with butted seam. Made with vinyl.

• Wire range: 12-10 AWG
• Stud size: 0.250
• 600-Volt
• 105 degree C
• 0.250 x 0.032 tab

Waterproof your outdoor splices with the DryConn Medium, Aqua/Red wire connector. This quality 1-step connector is filled with a dielectric silicone sealant that surrounds splices, making it water and corrosion resistant. This is an ideal choice for outdoor electrical connections exposed to condensation, water vapors or dust. The DryConn Aqua/Red meets the conditions set by the most recent NEC Code Book, requiring a UL 486G listed connector to be used for all splices in wet and damp locations.

• For use in patio and deck lighting, outdoor sound systems, exterior building lights, landscape lighting
• Waterproof and corrosion proof
• UL 486G listed, 600-Volt rated
• 1 step installation with no pre- twisting of wires necessary
• Minimum capacity 2 of # 18 wires
• Maximum capacity of 3 #10 wires

Save time on the job and experience your fastest wire connections with our single-step In-Sure Push-In Wire Connectors. This no-twist wire connector's low insertion force and ergonomic design reduces fatigue in your hands and wrists, helping you power through your jobs without the strain. Get visual confirmation that your connections are secure with the clear polycarbonate shell, while the color-coded design improves your productivity with easy port identification. This versatile wire connector is listed for use with 12-20 AWG solid wires, 12-16 AWG stranded wires, and 12 AWG copper-clad aluminum wires. Its compact size seamlessly fits into any box making these a top choice for lighting installations, prefabricated wiring systems, and other branch circuit wiring applications. Work with a new level of confidence knowing that these durable push-in connectors have CSA certification and are UL-listed to safely support up to 600V. In-Sure Push-In Wire Connectors-Giving you the push you need to get the job done faster.

• A MORE COMFORTABLE CONNECTION: Ergonomic design for easy grip and comfortable installation
• LESS HAND & WRIST STRAIN: Low insertion force for fast and easy connections
• DURABLE DESIGN: UL 94V-2 flame-retardant shell rated at 221°F(105°C)
• VOLTAGE RATING: Rated to 600V
• ADAPTABLE FOR ANY JOB: Approved for bonding and grounding applications
• INCREASED EFFICIENCY: Color-coded housing provides easy identification of port sizes
• PACKAGE INCLUDES: In-Sure Push-In Wire Connector, 2-Port, Bag of 100
• Includes 100 connectors
• UL 94V-2 flame-retardant shell rated at 221° F
• UL Listed to 486C and CSA certified to C22.2 #188
• UL 467 Listed for grounding and bonding applications
• CSA certified to C22.2 #188

Dependable and easy to use, Gardner Bender terminals (and wiring accessories) offer the high quality and application flexibility that professionals demand. Available in a variety of packaging options, look to Gardner Bender for secure wire connection options. The Underground UF Splice Kit accommodates waterproof splicing of 14 - 8 AWG UF copper wire.

• Connector set screws engage each wire securely for a solid splice
• Minimum conductor size 14/2 with ground
• Maximum conductor size 8/3 with ground
• Rated at 600-Volt maximum
• Kit contains 4 screw splice connectors and one 8 in. heavy-wall polyolefin heat-shrink tubing with watertight adhesive liner

Gardner Bender Wire Connectors are engineered to exceed the expectations of professional electricians. Perfect for commercial or residential applications GB Wire Connectors offer world-class quality, performance and application versatility. These multi-range hex-head connectors cover 95% of everyday applications making them the simple choice for all of your wire connection needs. Don't worry about using a hex tool to install you can't over-torque this connector because it's patented hex-head design strips out at UL torque saving the wires and your fingers. Inside the connector a zinc-plated square wire spring ensures a secure connection that resists corrosion. The thermoplastic shell is designed for long-lasting strength and resists chemicals while the deep skirt supports smooth wire entry and coverage of stripped wires. Use for: Large appliances, Timers, Indoor lighting, Switches, Ballasts, Junction Box, Air conditioners.

• Square wire spring grabs and holds wires for secure connections
• Long skirt covers stripped wires
• Rated at 600-Volt max in building wire and at 1000-Volt max in lighting, fixtures/luminaries and signs
• Copper to copper connections only
• Rated at 600-Volt maximum in building wiring and at 1,000-Volt maximum in lighting fixtures/luminaries and signs
• Copper-to-copper connections only

This wing-type ground wire connector is green in color. It is UL listed for pressure type grounding connectors. It can be sued on solid copper wire combinations only.

• Temperature rating 105 degree C (221 degree F)
• Tough thermoplastic, UL 94V-2 flame-retardant shell
• Zinc plated square wire spring
• Designed for making positive ground connections and bonding non-metallic sheathed cable

Waterproof your outdoor splices with the DryConn Small, Aqua/Orange wire connector. This quality 1-step connector is filled with a dielectric silicone sealant that surrounds splices, making it water and corrosion resistant. This is an ideal choice for outdoor electrical connections exposed to condensation, water vapors or dust. The DryConn Aqua/Orange meets the conditions set by the most recent NEC Code Book, requiring a UL 486G listed connector to be used for all splices in wet and damp locations.

• For use in outdoor and garage power outlets, door bells, spa and bathroom vent fans, patio and deck lighting
• Waterproof and corrosion proof
• UL 486G listed, 600-Volt rated
• 1 step installation with no pre- twisting of wires necessary
• Minimum capacity 2 of # 18 wires
• Maximum capacity of 2 #14 wires

Make electrical jobs easier than ever with the red/tan Twister PRO wire connector from IDEAL Electrical - the industry's trusted choice for quick and comfortable splicing. Rated for 600V and designed to support an impressive wire range from #22 - #8 AWG, this connector accommodates anything from two #18 AWG to four #10 AWG wires. You'll grip this connector with ease using the high-leverage wings on the sides, then install with smooth precision as the waxed, live-action spring tightly grabs the conductors. The patented SureGrip overmold ensures a comfortable and ergonomic grip, reducing hand fatigue and allowing you to apply more torque with less effort. Whether you're tackling residential or commercial projects, the Twister PRO delivers dependable performance and comfort - job after job.

• WIDEST WIRE RANGE: Handles #22 to #8 AWG wires - the widest range on the market
• SUREGRIP OVERMOLD: Patented ergonomic design provides a comfortable grip and easy installation
• HIGH-LEVERAGE WINGS: Engineered for twisting action with easy-grip wings, reducing your hand strain
• LIVE-ACTION SPRING: Installs smoothly with an expanding spring that delivers superior hold strength and secure connections
• CORROSION RESISTANCE: Protective coating on the spring is applied after coiling, ensuring coating is intact to provide long-lasting performance in harsh environments
• UL-LISTED: Tested and certified for safe and professional use
• PACKAGE INCLUDES: Jar of 250 Twister PRO electrical wire connectors

Fully Insulated Female Disconnects are entirely covered in an insulating nylon. Turned up edges give this spade more safety and reliability. Rated 300-Volt.

• Tab size: 0.250 x 0.032
• Stud size: 0.250
• Wire size: 16-14
• 105 degree C

Halex 5/16 in. Flexible Metal Conduit FMC Anti-Short Bushing 35 pcs. Protects The Sheathing On Conductors From Sharp Edges Within Fmc, Ac And Mc Cables. Polyethylene plastic. Fits 14/2, 14/3 and 12/2 cables. UL and CSA listed. For indoor use only. Mfg #75400

• Protects The Sheathing On Conductors From Sharp Edges Within Fmc, Ac And Mc Cables
• Polyethylene plastic
• Fits 14/2, 14/3 and 12/2 cables
• UL and CSA listed

Insulated female disconnects leave turned up edges for increased retention, safety and reliability. Electro-tin-plated copper with butted seam. Made with vinyl.

• Wire range: 16-14 AWG
• Stud size: 0.250
• 600-Volt
• 105 degree C

Vinyl spade terminals have open tongue end for rapid insertion on the mounting screw. Typically used on free-standing studs. The insulation type is vinyl.

• 300-Volt
• Funnel-entry feature eliminates wire strand "hang-up" and increases crimping speed with reliability
• Continuous-duty temperature range of -40 degree F to 194 degree F (-40 degree C to 90 degree C)
• Butted seam

Wago Lever Nuts 3 Wire Conductor Compact Splicing Connectors,. Adamax Wago Lever Nuts 3 Wire Conductor Compact Connectors. 3-Wire Compact Splicing Connector. Connects Wire Conductors From 24 To 12 AWG. For Use With Solid, Stranded Or Fine Stranded Conductors. Simple Wire Splicing - Pull Lever Up, Insert Conductor, Push Lever Back Down. Transparent Housing. Mfg #0221413K00-012. Mfg #0221413K00-012

• Adamax Wago Lever Nuts 3 Wire Conductor Compact Connectors
• 3-Wire Compact Splicing Connector
• Connects Wire Conductors From 24 To 12 AWG
• For Use With Solid, Stranded Or Fine Stranded Conductors

Dependable and easy to use, Gardner Bender terminals (and wiring accessories) offer the high quality and application flexibility that professionals demand. Available in a variety of packaging options, look to Gardner Bender for secure wire connection options. Disconnects have a vinyl insulated barrel and are rated at 600-Volt maximum.

• Used for waterproof installation or repair of 8 - 2 AWG copper cable
• Vinyl-insulated
• Rated at 600-Volt maximum
• Temperature rating: 167 degree F (75 degree C)

This small wire connector is orange in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wire.

• Tough thermoplastic, UL 94-Volt 2 flame-retardant shell
• Zinc plated square wire spring
• No pre-twisting required, push stripped conductors into connector and screw on
• Rated to 600-Volt maximum in building wiring and 1000-Volt maximum in lighting fixtures and signs

Wago Lever Nuts 5 Wire Conductor Compact Splicing Connectors,. Wago Lever Nuts 5 Wire Conductor Compact Connectors. 5-Wire Compact Splicing Connector. Connects Wire Conductors From 24 To 12 AWG. For Use With Solid, Stranded Or Fine Stranded Conductors. Simple Wire Splicing - Pull Lever Up, Insert Conductor, Push Lever Back Down. Transparent Housing. Mfg #0221415K00-012. Mfg #0221415K00-012

• Wago Lever Nuts 5 Wire Conductor Compact Connectors
• 5-Wire Compact Splicing Connector
• Connects Wire Conductors From 24 To 12 AWG
• For Use With Solid, Stranded Or Fine Stranded Conductors

Wago Lever Nuts 2 Wire Conductor Compact Splicing Connectors,. Wago Lever Nuts 2 Wire Conductor Compact Connector. 2-Wire Compact Splicing Connector. Connects Wire Conductors From 24 To 12 AWG. For Use With Solid, Stranded Or Fine Stranded Conductors. Simple Wire Splicing - Pull Lever Up, Insert Conductor, Push Lever Back Down. Transparent Housing. Mfg #221-412/K000-0012. Mfg #0221412K00-012

• Wago Lever Nuts 2 Wire Conductor Compact Connector
• 2-Wire Compact Splicing Connector
• Connects Wire Conductors From 24 To 12 AWG
• For Use With Solid, Stranded Or Fine Stranded Conductors

King Innovation's AlumiConn Aluminum to Copper Lug is approved by the Consumer Product Safety Commission (CPSC) and numerous insurance companies as a safe method for aluminum wiring repair. AlumiConn is a lug style connector with three separate ports to eliminate intermixing of conductors. It coats aluminum wires with a thin layer of silicone sealant to provide resistance from oxidation, and uses set screws to break up surface oxides and provide a secure mechanical connection. Avoid a complete re-wire by using AlumiConn, the most cost-effective aluminum wiring repair solution available.

• 3 ports allow conductors to remain separate, permitting the lug to run at a lower temperature and provide longer term reliability
• Most cost-effective solution for repairing aluminum wiring systems
• Secure mechanical connection
• Contains a layer of corrosion inhibitor that provides resistance from oxidation

Experience your trusted solution for tough retrofit applications with the Twister Al/Cu purple wire connector. This unique offering is CSA-certified and the only UL-listed aluminum-to-copper twist-on connector on the market. Pre-filled with an antioxidant compound, the connector prevents aluminum oxidation while providing a secure connection. The long entry cap keeps the compound inside while increasing dielectric strength. Grip this connector with ease using its swept wings, then install smoothly as the durable shell flexes. The ribbed cap permits quick and easy installs by hand or with a nut driver. The Twister Al/Cu connector provides your secure and reliable choice for retrofitting older residential buildings with aluminum wiring.

• AL/CU CONNECTIONS: Supports aluminum-to-copper and copper-to-copper applications from #18 to #10 AWG wire - do not use on aluminum-to-aluminum connections
• RETROFIT APPLICATIONS: Perfect for retrofitting older residential buildings with this one-time use connector
• CORROSION RESISTANCE: Prevents oxidation of aluminum conductors with pre-filled antioxidant compound
• PROTECTIVE SKIRT: Extended opening keeps the antioxidant compound inside while increasing dielectric strength
• SECURE CONNECTIONS: UL-Listed to 486C and CSA-Certified to C22.2 #188 for aluminum-to-copper connections up to 600V, as well as the only twist-on solution to comply with NEC Section #110-14 (b)
• HIGH-LEVERAGE WINGS: Engineered for twisting action with comfortable wings, reducing your hand strain
• LIVE-ACTION SPRING: Installs smoothly with a spring that expands and contracts with the aluminum wiring, delivering superior hold strength and quick take-up
• IMPACT STRENGTH: Durable copolymer shell withstands grabbing and pulling from tools
• PACKAGE INCLUDES: Bag of 10 Twister Al/Cu electrical wire connectors
• Warranty: Backed by a 1-year limited warranty on flooring and surfacing products as outlined in MSI guidelines

This wire connector is gray in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.

• Temperature rating 105 degree C (221 degree F)
• Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
• Zinc plated square wire spring
• No pre-twisting required, push stripped conductors into connector and screw on

Gardner Bender Wire Connectors are engineered to exceed the expectations of professional electricians. Perfect for commercial or residential applications GB Wire Connectors offer world-class quality, performance and application versatility. WireGard twist-on wire connectors are designed for general purpose applications requiring the connection of 2 or more copper wires. WireGard connectors feature a straight type Polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 105 degree C (221 degree F). Color coded for quick and easy size selection. Use for: Air conditioners, ceiling fans, doorbells, indoor lighting, switches, thermostats, ballasts, large and small appliances.

• Designed to require fewer turns to reach required torque and meet or exceed UL pull out and dielectric test requirements
• Square-wire zinc-plated spring instantly adjusts to the shape and size of the splice
• Flame-retardant properties resist heat distortion up to 105 degree C/221 degree F
• High-dielectric shell features deep skirt design to prevent exposure of bare wire
• Rated at 600-Volt MAX in building wire and at 1000-Volt MAX in lighting, fixtures/luminaries and signs
• Copper to copper connections only
• Copper-to-copper connections only
• Connection rated at 600-Volt MAX for building wiring and rated at 1,000-Volt MAX in lighting fixtures/luminaries and signs

Save time on the job and experience your fastest wire connections with our single-step In-Sure Push-In Wire Connectors. This no-twist wire connector's low insertion force and ergonomic design reduces fatigue in your hands and wrists, helping you power through your jobs without the strain. Get visual confirmation that your connections are secure with the clear polycarbonate shell, while the color-coded design improves your productivity with easy port identification. This versatile wire connector is listed for use with 12-20 AWG solid wires, 12-16 AWG stranded wires, and 12 AWG copper-clad aluminum wires. Its compact size seamlessly fits into any box making these a top choice for lighting installations, prefabricated wiring systems, and other branch circuit wiring applications. Work with a new level of confidence knowing that these durable push-in connectors have CSA certification and are UL-listed to safely support up to 600V. In-Sure Push-In Wire Connectors-Giving you the push you need to get the job done faster.

• A MORE COMFORTABLE CONNECTION: Ergonomic design for easy grip and comfortable installation
• LESS HAND & WRIST STRAIN: Low insertion force for fast and easy connections
• DURABLE DESIGN: UL 94V-2 flame-retardant shell rated at 221°F(105°C)
• VOLTAGE RATING: Rated to 600V
• ADAPTABLE FOR ANY JOB: Approved for bonding and grounding applications
• INCREASED EFFICIENCY: Color-coded housing provides easy identification of port sizes
• PACKAGE INCLUDES: In-Sure Push-In Wire Connector, 2-Port, Bag of 100
• UL 94V-2 flame-retardant shell rated at 221 degree F
• UL Listed to 486C and CSA certified to C22.2 #188
• UL Listed to 486C
• UL 467 listed for grounding and bonding applications

3M R/Y plus Wire Connectors feature 3 connector sizes with increased range to handle the work of 7 standards connectors. R/Y plus Wire Connectors simplify selection of the right connector for a wide range of wiring jobs. Easy to use and convenient, 3M R/Y plus Wire Connectors reduce necessary inventory and help ensure the right connector is always on hand.

• 2 connector replaces 2
• Provides a quick bite
• Flexible safety skirt
• Wire range 2 #18 - 2 #8
• UL Listed wire connectors
• 100 connectors per box

Constructed from electro-tin-plated copper tubing. The center stop provides equal insertion of wires. Made with vinyl.

• Vinyl (PVC)
• Funnel-entry feature eliminates wire strand "hang-up" and increases crimping speed with reliability
• Continuous-duty temperature range of -40 degree F to 194 degree F (-40 degree C to 90 degree C)
• 600-Volt

Blackburn Type ADR-ALCUL Single-Conductor, 1-Hole Mount, Conductor. Wire range 14 AWG-2Str, Length 1-5/32 in., Width 1/2 in., Height 9/16 in., 1/4 in. Bolt Hole. Made of Tin-Plated Aluminum.

• Type ADR-ALCUL single-conductor
• Conductor range 14 AWG-2Str
• 1-hole mount
• UL E9809
• Easy installation no special tools required

These kits have been carefully designed to include the most popular NSi miniterm terminals. Cases are reusable and made of extremely durable polypropylene. Kits provide the ultimate in organization and convenience. Clearly labeled on the inside lid for easy recognition. Convenient size for easy carrying and easy storing.

• Vinyl insulated: 300-Volt, 75 degree C
• cULus listed for quick connect terminals
• cULus listed wire connector and kit includes
• (10) R22-6V
• (10) R22-8V
• (10) R22-10V
• (10) R16-6V
• (10) R16-8V
• (10) R16-10V
• (5) R12-10V
• (10) S22-8V
• (10) S22-10V
• (10) S16-8V
• (10) S16-10V
• (10) S12-10V
• (10) M22-250-3V
• (10) M16-250-3V
• (10) B22-V
• (10) B16-V
• (10) B12-V
• (10) F22-250-3V
• (10) F16-250-3V

Vinyl spade terminals have open tongue end for rapid insertion on the mounting screw. Typically used on free-standing studs. The insulation type is vinyl.

• 300-Volt
• Funnel-entry feature eliminates wire strand "hang-up" and increases crimping speed with reliability
• Continuous-duty temperature range of -40 degree F to 194 degree F (-40 degree C to 90 degree C)
• Butted seam

Insulated female disconnects leave turned up edges for increased retention, safety and reliability. Electro-tin-plated copper with butted seam. Made with vinyl.

• Wire range: 22-18 AWG
• Stud size: 0.250
• 600-Volt
• 105 degree C