Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• Branch, feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings
• Conductors are annealed (soft) copper, rated at 600-Volt and heat, moisture, gasoline and oil resistant
• Insulated with tough, heat and moisture-resistant PVC
• Use in wet or dry locations at temperatures not to exceed 194 degree F (90 degree C) or not to exceed 167 degree F (75 degree C) when exposed to oil or coolant

Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• THHN copper conductors are annealed (soft) copper, rated at 600-Volt and heat, moisture, gasoline and oil resistant, UL Listed
• THHN cable is insulated with a tough heat and moisture resistant polyvinyl chloride (PVC)
• THHN is available in a variety of colors, lengths and gauges; also available in solid and stranded copper
• THHN cable is suitable for use in wet or dry locations at temperatures not to exceed 90 degree C

Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• THHN copper conductors are annealed (soft) copper, rated at 600-Volt and heat, moisture, gasoline and oil resistant, UL Listed
• THHN cable is insulated with a tough heat and moisture resistant polyvinyl chloride (PVC)
• THHN is available in a variety of colors, lengths and gauges; also available in solid and stranded copper
• THHN cable is suitable for use in wet or dry locations at temperatures not to exceed 90 degree C

Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• Branch, feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings
• Made with annealed (soft) copper, compressed stranded
• Insulation is high heat and moisture resistant polyvinyl chloride (PVC)
• Jacket is abrasion, moisture, gasoline and oil resistant nylon
• THHN is rated for 600-Volt
• Thermal-magnetic

Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• Branch, feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings
• Made with annealed (soft) copper, compressed stranded
• Insulation is high heat and moisture resistant polyvinyl chloride (PVC)
• Jacket is abrasion, moisture, gasoline and oil resistant nylon
• THHN is rated for 600-Volt
• UL Listed and CSA certified

The Southwire Company 50 degree Cable is mainly used in conduit and cable trays for feeders, services and branch circuits in commercial or industrial applications as specified in the NEC2. UL listed. It is also CSA listed. Southwire SIMpull THHN copper conductors are primarily used in conduit and cable trays for services, feeders and branch circuits in commercial or industrial applications as specified in the National Electrical Code. Voltage for all applications is 600-Volt. SIMpull THHN copper conductors are designed to be installed without application of a pulling lubricant.

• Primarily used in conduit and cable trays for services, feeders and branch circuits in commercial or industrial applications as specified in the NEC2
• Conductors are annealed (soft) copper, rated at 600-Volt and heat, moisture, gasoline and oil resistant
• Insulated with tough, heat and moisture-resistant PVC
• For use in wet or dry locations at temperatures not to exceed 194 degree F (90 degree C) or not to exceed 167 degree F (75 degree C) when exposed to oil or coolant
• Black

Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• Branch, feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings
• Made with annealed (soft) copper, compressed stranded
• Insulation is high heat and moisture resistant polyvinyl chloride (PVC)
• Jacket is abrasion, moisture, gasoline and oil resistant nylon
• THHN is rated for 600-Volt
• UL Listed and CSA certified

The Southwire 500 ft. Brown 18/3 Thermostat and Bell Cable is designed for use in heating and air conditioning controls as well as in alarm systems. This cable offers a flat design. The insulation is made of 6 mils of polypropylene and a brown PVC jacket.

• UL Listed and CSA certified
• Designated as class-2 power-limited circuit cable
• Rated at 150-Volt
• Solid copper conductors

The Southwire 250 ft. 18/8 thermostat wire features inner conductor material encased in a brown PVC jacket. The solid wire is designed for use in interior residential applications such as thermostats. Thermostat wire is a class 2 power-limited circuit cable.

• Solid copper conductors with 6 mils of polypropylene insulation, conductors are paralleled and covered
• Rated 150-Volt
• Sunlight resistant from -20 degree C to +60 degree C
• UL listed, GreenSpec and RoHS compliant

The Romex Type NM-B Copper Building Wire boasts a patented SIMpull Cable Jacket, designed to facilitate effortless pulling, stripping, and installation procedures. Widely utilized in residential building wiring, this cable serves as a reliable branch circuit, effectively powering switches and outlets. Its installation is meticulously suited for above-ground use within dry environments, and it confidently carries a 600-volt voltage rating, underscoring its durability. Notably versatile, the NM-B cable can be seamlessly threaded through air voids within masonry block or tile walls, granted these surfaces remain free from moisture. Proudly carrying the Made in America label, this cable seamlessly integrates cutting-edge innovation with a dedication to quality craftsmanship.

• Brand received (Cerrowire or Southwire) varies by zip code
• For exposed and concealed applications
• Type NM-B cable (non-metallic sheathed cable) can be used in residential wiring as branch circuits for outlets, switches or other loads
• For indoor use
• For dry locations up to 90 degree C or 194 degree F as specified in the NEC 1
• 600-Volt maximum
• 1,000 ft. of cable
• Nylon jackets help significantly reduce pulling force resulting in easier installation
• Copper conductors

Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• Branch, feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings
• Conductors are annealed (soft) copper, rated at 600-Volt and heat, moisture, gasoline and oil resistant
• Insulated with tough, heat and moisture-resistant PVC
• Use in wet or dry locations at temperatures not to exceed 194 degree F (90 degree C) or not to exceed 167 degree F (75 degree C) when exposed to oil or coolant
• White color

Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• Can be used in wet or dry locations
• Made with annealed (soft) copper, compressed stranded
• Insulation is high heat and moisture resistant polyvinyl chloride (PVC)
• Jacket is abrasion, moisture, gasoline and oil resistant nylon
• THHN is rated for 600-Volt
• UL Listed and CSA certified

The Romex Type NM-B Copper Building Wire, featuring a patented SIMpull Cable Jacket, offers a hassle-free experience during installation, pulling, and stripping. Primarily intended for residential building wiring, it serves as an efficient branch circuit for switches and outlets. Suitable for above-ground installation in dry areas, this cable boasts a voltage rating of 600-volts, ensuring reliable performance. It's noteworthy that NM-B cable can be routed through air voids within masonry block or tile walls, as long as these walls remain free from wetness or dampness. Proudly crafted in the United States, it exemplifies quality and innovation in wiring solutions.

• Brand received (Cerrowire or Southwire) varies by zip code
• For exposed and concealed applications
• Type NM-B cable (non-metallic sheathed cable) can be used in residential wiring as branch circuits for outlets, switches, or other loads
• May be run in air voids of masonry block or tile walls that are not subjected to excessive moisture or dampness
• For indoor use
• For dry locations up to 90 degree C or 194 degree F as specified in the NEC 1
• 600-Volt maximum
• 125 ft. of cable
• Nylon jackets help significantly reduce pulling forced resulting in easier installation
• Copper conductors

Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• Branch, feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings
• Conductors are annealed (soft) copper, rated at 600-Volt and heat, moisture, gasoline and oil resistant
• Insulated with tough, heat and moisture-resistant PVC
• Use in wet or dry locations at temperatures not to exceed 194 degree F (90 degree C) or not to exceed 167 degree F (75 degree C) when exposed to oil or coolant

Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• Can be used in wet or dry locations
• Made with annealed (soft) copper, compressed stranded
• Insulation is high heat and moisture resistant polyvinyl chloride (PVC)
• Jacket is abrasion, moisture, gasoline and oil resistant nylon

The Southwire 500 ft. Brown 18-5 Thermostat and Bell Cable is designed for use in heating and air conditioning controls as well as in alarm systems. This cable offers a flat design. The insulation is made of 6 mils of polypropylene and a brown PVC jacket.

• UL listed
• Designated as class-2 power-limited circuit cable
• Rated at 150-Volt
• Solid copper conductors

Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• Can be used in wet or dry locations
• Made with annealed (soft) copper, compressed stranded
• Insulation is high heat and moisture resistant polyvinyl chloride (PVC)
• Jacket is abrasion, moisture, gasoline and oil resistant nylon

Southwire Type THHN or THWN-2 conductors are primarily used in conduit and cable trays for services, feeders, and branch circuits in commercial or industrial applications as specified in the NEC 2. When used as Type THHN or T90 Nylon conductor is suitable for use in dry locations at temperatures not to exceed 90 degree C. Conductor is suitable for use in wet or dry locations at temperatures not to exceed 90 degree C or not to exceed 75 degree C when exposed to oil or coolant.

• Can be used in wet or dry locations
• Made with annealed (soft) copper
• Insulation is high heat and moisture resistant polyvinyl chloride (PVC)
• Jacket is abrasion, moisture, gasoline and oil resistant nylon
• THHN is rated for 600-Volt

Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• Can be used in wet or dry locations
• Made with annealed (soft) copper, compressed stranded
• Insulation is high heat and moisture resistant polyvinyl chloride (PVC)
• Jacket is abrasion, moisture, gasoline and oil resistant nylon

Southwire's copper UF-B cable is used in applications that include outside lamp posts, pumps and other loads. It can also be used for outbuildings such as garages and barns. UF-B feeds from a distribution point in an existing building. UF-B has a heat capacity of 90 degree C and is rated at 600-Volt. UL Listed and CSA Certified.

• Brand received (Cerrowire or Southwire) varies by zip code
• Available with 2 or 3 conductors with or without a ground wire
• Conductors are made of annealed (soft) copper
• PVC insulation and a nylon, color coded jacket
• Used indoors for wet or corrosive locations
• Used outdoors for direct burial
• Resistant to sunlight, moisture and fungus

Southwire's THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwire's THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• Branch, feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings
• Made with annealed (soft) copper, compressed stranded
• Insulation is high heat and moisture resistant polyvinyl chloride (PVC)
• Jacket is abrasion, moisture, gasoline and oil resistant nylon
• THHN is rated for 600-Volt
• UL Listed and CSA certified

Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• Can be used in wet or dry locations
• Made with annealed (soft) copper, compressed
• Insulation is high heat and moisture resistant polyvinyl chloride (PVC)
• Jacket is abrasion, moisture, gasoline and oil resistant nylon
• UL Listed, CSA certified and RoHS compliant

Southwire's copper UF-B cable is used in applications that include outside lamp posts, pumps and other loads. It can also be used for outbuildings such as garages and barns. UF-B feeds from a distribution point in an existing building. UF-B has a heat capacity of 90 degree C and is rated at 600-Volt. UL Listed and CSA Certified.

• Brand received (Cerrowire or Southwire) varies by zip code
• Available with 2 or 3 conductors with or without a ground wire
• Conductors are made of annealed (soft) copper
• PVC insulation and a nylon, color coded jacket
• Used indoors for wet or corrosive locations
• Used outdoors for direct burial
• Resistant to sunlight, moisture and fungus

Southwire Armorlite Type MC Quick Pre-cut Length Whips are suitable for branch, feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings. They can also be used for power, lighting, control and signal circuits. Conductors are made of soft drawn solid copper and are cabled together with a binder tape bearing the print legend wrapped around the assembly.

• Brand received (Cerrowire or Southwire) varies by zip code
• Approved for concealed or exposed installations
• Permitted for use in environmental air-handling spaces per NEC
• Lightweight aluminum interlocked armor rated for 600-Volt
• Solid copper THHN/THWN insulated singles with a green insulated copper grounding conductor
• Cut to length type MC cable with factory installed zinc-die cast snap-in fittings
• 8 in. conductor leads with 1/2 in. insulation stripped
• Color coded packaging and labels to identify voltage and number of conductors