Electrical Wires & Cables
10-32 in. x 3/8 in. slotted hexagon-head washer-face ground screw. Green dye finish and 6 in. solid copper #12 AWG insulated wire. Wire comes pre looped at 1 end.
- Pre-looped 6 in. solid copper # 12 AWG insulated wire
- Steel
- #12 AWG insulated wire
- 0-32 x 3/8 in. slotted hexagon-head washer-face ground screw with green dye finish and a 6 in. solid copper #12 AWG insulated wire
Ultra-Whip is a non-metallic conduit constructed with two different PVC materials that are extruded to form a highly flexible product designed especially for electrical applications. A rigid material forms the stiff helical spring, which is completely encapsulated by a second flexible compound. Stranded Copper THHN/THWN conductors and UL Listed LFNC-B Fittings are installed at the factory. 12 in. wire leads with 1/2 in. of stripped insulation are left exposed at each end for hassle-free hook-ups. It is commonly used for connecting air conditioners, pumps, motors, compressors, swimming pool equipment and similar equipment.
- Brand received (Cerrowire or Southwire) varies by zip code
- Highly flexible non-metallic conduit with factory installed conductors
- Stranded copper THHN/THWN insulated conductors
- Green insulated copper grounding conductor
- Liquid-tight flexible non-metallic conduit type B (LFNC-B) fittings
- Intended for 208-Volt/240-Volt/480-Volt single phase circuits
- Resistant to rust, cracks and separation
- Non-metallic raceway is non-conducting
- 600-Volt
The Southwire 3/4 in. x 6 ft. Liquidtite Whip helps you connect air conditioners, pumps, motors, compressors, swimming pool devices and similar equipment. The ready-to-install whip has a non-metallic conduit formed with 2 different PVC materials. Resistant to rust, cracks and separation.
- Brand received (Cerrowire or Southwire) varies by zip code
- Connects air conditioners, pumps, motors, compressors, swimming pool devices and similar equipment
- Has stranded copper THHN/THWN conductors
- 12 in. wire leads are exposed at each end for hassle-free hookups with 1/2 in. stripped insulation
- Non-metallic conduit is formed with 2 different PVC materials
- UL Listed and CSA certified
The Split Bolt Connector, Equal Main and Tap Range 6 Sol-8 Sol, Conductor Range for Min Tap with One Max Main 14 Sol is a bolt and nut of high-strength corrosion-resistant bronze alloy. This item is tested and listed to UL486C, UL467 for grounding and for direct burial. The pressure bar is copper through 40H, copper alloy for 350 kcmil and above.
- Bolt and nut of high-strength corrosion-resistant bronze alloy
- Pressure bar is copper through 40H, copper alloy for 350 kcmil and above
- Bolt and nut of hex design up to 350 kcmil
- Tested and listed to UL486C, UL467 for grounding and for direct burial through Cat. No. 40H
Cable Ties are designed for commercial use with wide operating temperature ranges and superior holding power. Cable Ties are manufactured using a superior nylon 6/6 material. All cable ties are UL62275 listed.
- NYLON 6/6
- 50LB TENSILE
- UV OUT DOOR RATED
- 11" LONG
The Southwire 500 ft. Brown 18/2 Thermostat and Bell Cable is rated to 150-Volt and is classified as class-2 power-limited circuit cable. This thermostat and bell cable offers solid copper conductors with PVC insulation. This thermostat wire is also sunlight resistant.
- For use in heating and air conditioning controls
- Rated -20 degree C to 60 degree C
- Used in bell and alarm systems
- UL Listed
- Flat design
Cable Ties are designed for commercial use with wide operating temperature ranges and superior holding power. Cable Ties are manufactured using a superior nylon 6/6 material. All cable ties are UL62275 listed.
- NYLON 6/6
- UL62275
- UV RATED
- 50LB TENSILE
Cable Ties are designed for commercial use with wide operating temperature ranges and superior holding power. Cable Ties are manufactured using a superior nylon 6/6 material. All cable ties are UL62275 listed.
- NYLON 6/6
- UL62275
- UV RATED
- 50LB TENSILE
Cable Ties are designed for commercial use with wide operating temperature ranges and superior holding power. Cable Ties are manufactured using a superior nylon 6/6 material. All cable ties are UL62275 listed.
- NYLON 6/6
- UL62275
- UV RATED
- 50LB TENSILE
This wire connector is yellow in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
Type NM-B (non-metallic-sheathed cable) may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90 degree C (with ampacity limited to that for 60 degree C conductors) as specified in the NEC 1. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not subject to excessive moisture or dampness. Voltage rating for NM-B cable is 600-Volt.
- Copper conductors are annealed (soft) copper and UL Listed
- Cable is available in a variety of colors, lengths and gauges
- Run in air voids of masonry block and tile walls
- Unique (SlikQuik infused membrane) jacket construction allows for 50% reduction in pulling force resulting in easier installation
- 12-Gauge
- NM-B has 2, 3 and 4-conductors and available with 2 neutrals, construction designed for easier pulling
The Romex Type NM-B Copper Building Wire comes with a patented SIMpull Cable Jacket that significantly simplifies the process of pulling, stripping, and installation. This cable is a familiar choice in residential building wiring, frequently serving as a reliable branch circuit to power switches and outlets. Designed exclusively for above-ground installation in dry settings, it confidently carries a 600-volt voltage rating, emphasizing its durability and performance. Notably adaptable, the NM-B cable can be seamlessly routed through air voids within masonry block or tile walls, as long as these surfaces remain unaffected by moisture. Proudly displaying the Made in America label, this cable effortlessly blends innovation with a commitment to quality craftsmanship.
- NM-B has 2-conductors, 3-conductors and 4-conductors and available with 2-neutrals, construction designed for easier pulling
- Copper conductors are annealed (soft) copper, UL Listed
- Cable is available in a variety of colors, lengths and gauges
- Unique (SlikQuik infused membrane) jacket construction allows for 50% reduction in pulling force resulting in easier installation
This wing-type wire connector is red in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
- Maximum AWG: 5#12
This wire connector is red in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
Southwire Armorlite Type MC Cable is constructed with soft-drawn copper, Type THHN/THWN conductors rated 90 degree C dry available in sizes 14 AWG through 2 AWG and a green insulated grounding conductor. The conductors are cabled together and a binder tape bearing the print legend is wrapped around the assembly. Aluminum interlocking armor is applied over the assembly.
- Brand received (Cerrowire or Southwire) varies by zip code
- Branch, feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings
- Power, lighting, control and signal circuits
- Fished or embedded in plaster
- Concealed or exposed installations
- Environmental air-handling spaces per NEC 300.22 (C)
- Places of assembly per NEC 518.4 and theaters per NEC 520
- Installation in cable tray and approved raceways
- Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) and 645.5(D)(2)
- Conductors are cabled together and wrapped with a binder tape bearing the print legend
- Aluminum interlocking armor jackets
This wire connector is red in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Flame retardant - thermoplastic shell provides excellent electrical insulation
- Fixed, precise square wire spring provides more securely gripping on conductors
- Sure-grip ribs improve gripping ability and comfort
- Minimum AWG 1#18 with1#20 - maximum AWG 4 #16 with1 #20
This wing-type wire connector is tan in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Tough thermoplastic, UL 94-Volt 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
- Rated to 600-Volt maximum in building wiring and 1000-Volt maximum in lighting fixtures and signs
- Minimum AWG 3 #22 - maximum AWG 3 #10
Southwire offset lugs are used in termination of a conductor. These lugs are designed for single hole mount. Durable copper alloy construction. Specified for use with #8 STR - #2 STR Wire.
- cULus Listed
- Wire range: # 8 STR - # 2 STR
- Single 1/4 in. hole mount
- Rated 600-Volt/90°C
- 2-pack
Use the IDEAL NOALOX 4 oz. Anti-Oxidant Compound to improve the efficiency of aluminum conductor connections. This compound provides additional inner-strand and inner-conductor current paths. For use with pressure type wire connectors including screw-on, tap, service entrance and split-bolts.
- Anti-oxidant and anti-seizing compound improves efficiency and service life of aluminum electrical applications
- Suspended zinc particles penetrate and cut aluminum oxide
- Provides additional inner-strand and inner-conductor current paths for improved conductivity and cooler connections
- Reduces galling and seizing on aluminum conduit joints to promote good ground continuity
MagnaLug Inverter Connector 4 Gauge. Can be crimped or soldered , tab length .67", tab width .21", thickness .15"
Southwire Ultratite Liquidtite Flexible Non-Metallic PVC Conduit, 1/2" X 100'. Southwire 1/2 In. X 100 Ft. Ultratite Liquidtight Flexible Non-Metallic Pvc Conduit. Brand Received (Cerrowire Or Southwire) Varies By Zip Code. Suitable For The Installation And Protection Of Electrical Conductors In Circuits Of 600-Volt Nominal Or Less. Flexible, Rigid PVC Construction For Crush Resistance. Liquid-Tight Design Protects Against Vapors, Solids And The Weather For Use In Applications Requiring Movement, Crossover Connections Or Tight Bends. Accommodates Use In Motor Circuit Applications As Raceways For Motor Feeders, Branch And Control Circuits. Use For Conductors Of Motor Feeders, Branch And Control Circuits. UL And CSA Safety Listings. Mfg #55094201. Mfg #55094201
- Southwire 1/2 In. X 100 Ft. Ultratite Liquidtight Flexible Non-Metallic Pvc Conduit
- Brand Received (Cerrowire Or Southwire) Varies By Zip Code
- Suitable For The Installation And Protection Of Electrical Conductors In Circuits Of 600-Volt Nominal Or Less
- Flexible, Rigid PVC Construction For Crush Resistance
Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.
- THHN copper conductors are annealed (soft) copper, rated at 600-Volt and heat, moisture, gasoline, and oil resistant, UL Listed
- THHN cable is insulated with a tough heat and moisture resistant polyvinyl chloride (PVC)
- THHN is available in a variety of colors, lengths and gauges, also available in solid and stranded copper
- THHN cable is suitable for use in wet or dry locations at temperatures not to exceed 90 degree C
This wing-type wire connector is yellow in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Tough thermoplastic, UL 94-Volt 2 flame-retardant shell
- Zinc plated square wire spring
- Rated to 600-Volt maximum in building wiring and 1000-Volt maximum in lighting fixtures and signs
- No pre-twisting required, push stripped conductors into connector and screw on
This wire connector is red in color. It is UL listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Flame retardant - thermoplastic shell provides excellent electrical insulation
- Fixed, precise square wire spring provides more securely gripping on conductors
- Sure-grip ribs improve gripping ability and comfort
- Deep skirt entry provides protection from flashover and shorts