Electrical Wires & Cables
This wing-type wire connector is red in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
- Maximum AWG: 5#12
This wing-type wire connector is yellow in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Tough thermoplastic, UL 94-Volt 2 flame-retardant shell
- Zinc plated square wire spring
- Rated to 600-Volt maximum in building wiring and 1000-Volt maximum in lighting fixtures and signs
- No pre-twisting required, push stripped conductors into connector and screw on
This wire connector is orange in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
This wire connector is red in color. It is UL listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Flame retardant - thermoplastic shell provides excellent electrical insulation
- Fixed, precise square wire spring provides more securely gripping on conductors
- Sure-grip ribs improve gripping ability and comfort
- Deep skirt entry provides protection from flashover and shorts
This wire connector is tan in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
Blackburn Type H - High Strength Split-Bolt Connector. Conductor Range for Equal Main and Tap 4 Sol-8 Sol, Conductor Range for Min Tap with One Max Main 14 Sol. Both the bolt and nut are made of high-strength corrosion-resistant bronze alloy.
- High strength split-bolt connector
- Conductor range for equal main and tap 4 sol-8 sol
- Bolt and nut of hex design
- UL E9809
10-32 in. x 3/8 in. slotted hexagon-head washer-face ground screw. Green dye finish and 6 in. solid copper #12 AWG insulated wire. Wire comes pre looped at 1 end.
- Pre-looped 6 in. solid copper # 12 AWG insulated wire
- Steel
- #12 AWG insulated wire
- 0-32 x 3/8 in. slotted hexagon-head washer-face ground screw with green dye finish and a 6 in. solid copper #12 AWG insulated wire
Blackburn Dual-Rated Mechanical Connector. Type ADR-ALCUL 2-Conductor, 1-hole Mount, Conductor. Wire range 14 AWG-2/0 Str. Connector is made a tin-plated aluminum.
- Easy installation
- Dual-rated mechanical connector
- 1/4 in.
- UL E9809
Ultra-Whip is a non-metallic conduit constructed with two different PVC materials that are extruded to form a highly flexible product designed especially for electrical applications. A rigid material forms the stiff helical spring, which is completely encapsulated by a second flexible compound. Stranded Copper THHN/THWN conductors and UL Listed LFNC-B Fittings are installed at the factory. 12 in. wire leads with 1/2 in. of stripped insulation are left exposed at each end for hassle-free hook-ups. It is commonly used for connecting air conditioners, pumps, motors, compressors, swimming pool equipment and similar equipment.
- Brand received (Cerrowire or Southwire) varies by zip code
- Highly flexible non-metallic conduit with factory installed conductors
- Stranded copper THHN/THWN insulated conductors
- Green insulated copper grounding conductor
- Liquid-tight flexible non-metallic conduit type B (LFNC-B) fittings
- Intended for 208-Volt/240-Volt/480-Volt single phase circuits
- Resistant to rust, cracks and separation
- Non-metallic raceway is non-conducting
- 600-Volt
Blackburn Type ADR-ALCUL Single-Conductor, 1-Hole Mount, Conductor. Wire range 14 AWG-2Str, Length 1-5/32 in., Width 1/2 in., Height 9/16 in., 1/4 in. Bolt Hole. Made of Tin-Plated Aluminum.
- Type ADR-ALCUL single-conductor
- Conductor range 14 AWG-2Str
- 1-hole mount
- UL E9809
- Easy installation no special tools required
The Southwire 3/4 in. x 6 ft. Liquidtite Whip helps you connect air conditioners, pumps, motors, compressors, swimming pool devices and similar equipment. The ready-to-install whip has a non-metallic conduit formed with 2 different PVC materials. Resistant to rust, cracks and separation.
- Brand received (Cerrowire or Southwire) varies by zip code
- Connects air conditioners, pumps, motors, compressors, swimming pool devices and similar equipment
- Has stranded copper THHN/THWN conductors
- 12 in. wire leads are exposed at each end for hassle-free hookups with 1/2 in. stripped insulation
- Non-metallic conduit is formed with 2 different PVC materials
- UL Listed and CSA certified
Gardner Bender Wire Connectors are engineered to exceed the expectations of professional electricians. Perfect for commercial or residential applications GB Wire Connectors offer world-class quality, performance and application versatility. Use Gardner Bender crimp connectors for strong, vibration-resistant permanent connections in branch circuit and fixture wiring. These connectors are made of zinc-plated steel. They can withstand harsh environments.
- 18 - 10 AWG wire range
- Designed for pressure type connections
- Vibration resistant
- UL and CSA safety listings
This wire connector is red in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Flame retardant - thermoplastic shell provides excellent electrical insulation
- Fixed, precise square wire spring provides more securely gripping on conductors
- Sure-grip ribs improve gripping ability and comfort
- Minimum AWG 1#18 with1#20 - maximum AWG 4 #16 with1 #20
This wire connector is red in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
Southwire Armorlite Type MC Cable is constructed with soft-drawn copper, Type THHN/THWN conductors rated 90 degree C dry available in sizes 14 AWG through 2 AWG and a green insulated grounding conductor. The conductors are cabled together and a binder tape bearing the print legend is wrapped around the assembly. Aluminum interlocking armor is applied over the assembly.
- Brand received (Cerrowire or Southwire) varies by zip code
- Branch, feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings
- Power, lighting, control and signal circuits
- Fished or embedded in plaster
- Concealed or exposed installations
- Environmental air-handling spaces per NEC 300.22 (C)
- Places of assembly per NEC 518.4 and theaters per NEC 520
- Installation in cable tray and approved raceways
- Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) and 645.5(D)(2)
- Conductors are cabled together and wrapped with a binder tape bearing the print legend
- Aluminum interlocking armor jackets
This set of wire connectors includes 5-red wire connectors, 6-yellow wire connectors, 6-tan wire connectors, 4-blue wire connectors and 3-gray wire connectors. It is UL Listed for pressure type wire connectors. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
- Gardner Bender® Cable Ties
- Pkg of 100
- 14"
- Black
- 75 lb tensile strength
- Bundle dia .06 to 4"
- Uv resistant nylon
- No regrind material is ever put back into the system
- Tapered neck minimizes stress at any one point
- Tapered and bent tip assures proper tie direction and easy insertion
- Strap serrations closely spaced to permit fine adjustment while securing bundles
- MFG# 46-315UVB
Blackburn Type APS Tin-Plated Aluminum Dual-Rated Split-Bolt Connector. For Use on Copper, Aluminum Conductors. Conductor Range for Equal Main and Tap 2-8 Str.
- Installs with standard wrenches
- Tin-plated aluminum
- Use on copper, aluminum conductors
- UL E9809
Experience your trusted solution for tough retrofit applications with the Twister Al/Cu purple wire connector. This unique offering is CSA-certified and the only UL-listed aluminum-to-copper twist-on connector on the market. Pre-filled with an antioxidant compound, the connector prevents aluminum oxidation while providing a secure connection. The long entry cap keeps the compound inside while increasing dielectric strength. Grip this connector with ease using its swept wings, then install smoothly as the durable shell flexes. The ribbed cap permits quick and easy installs by hand or with a nut driver. The Twister Al/Cu connector provides your secure and reliable choice for retrofitting older residential buildings with aluminum wiring.
- AL/CU CONNECTIONS: Supports aluminum-to-copper and copper-to-copper applications from #18 to #10 AWG wire - do not use on aluminum-to-aluminum connections
- RETROFIT APPLICATIONS: Perfect for retrofitting older residential buildings with this one-time use connector
- CORROSION RESISTANCE: Prevents oxidation of aluminum conductors with pre-filled antioxidant compound
- PROTECTIVE SKIRT: Extended opening keeps the antioxidant compound inside while increasing dielectric strength
- SECURE CONNECTIONS: UL-Listed to 486C and CSA-Certified to C22.2 #188 for aluminum-to-copper connections up to 600V, as well as the only twist-on solution to comply with NEC Section #110-14 (b)
- HIGH-LEVERAGE WINGS: Engineered for twisting action with comfortable wings, reducing your hand strain
- LIVE-ACTION SPRING: Installs smoothly with a spring that expands and contracts with the aluminum wiring, delivering superior hold strength and quick take-up
- IMPACT STRENGTH: Durable copolymer shell withstands grabbing and pulling from tools
- PACKAGE INCLUDES: Bag of 10 Twister Al/Cu electrical wire connectors
- Warranty: Backed by a 1-year limited warranty on flooring and surfacing products as outlined in MSI guidelines
Terminal service packs are handy and low priced, ideal for small jobs. Porcelain construction for higher temperature applications. Keep a pack on your truck, or use at home.
- Small #3 high heat porcelain wire connector
- 12-10 AWG wire (15-pieces)
- For higher temperatures - up to 1,800F
- Porcelain
- Gardner Bender® 8" Nyn UV Rstant Cble Tes - 75 Punds - Black, Package Of 100
- Pkg of 100
- 8"
- Black
- 75 lb tensile strength
- Bundle dia .06 to 2.19"
- Superior grade uv resistant nylon
- No regrind material is ever put back into the system
- Tapered neck minimizes stress at any one point
- Tapered and bent tip assures proper tie direction and easy insertion
- Strap serrations closely spaced to permit fine adjustment while securing bundles
- MFG# 46-308UVB
- Gardner Bender® Cable Ties
- Pkg of 100
- 11"
- Black
- 75 lb tensile strength
- Bundle dia .06 to 3"
- Uv resistant nylon
- No regrind material is ever put back into the system
- Tapered neck minimizes stress at any one point
- Tapered and bent tip assures proper tie direction and easy insertion
- Strap serrations closely spaced to permit fine adjustment while securing bundles
- MFG# 46-310UVB
This wire connector is red in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
- 600-Volt maximum - minimum AWG 3#18 - maximum AWG 3#10
This wing-type wire connector is tan in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Tough thermoplastic, UL 94-Volt 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
- Rated to 600-Volt maximum in building wiring and 1000-Volt maximum in lighting fixtures and signs
- Minimum AWG 3 #22 - maximum AWG 3 #10