Electrical Wires & Cables
This wing-type wire connector is red in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
- Maximum AWG: 5#12
This wing-type wire connector is yellow in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Tough thermoplastic, UL 94-Volt 2 flame-retardant shell
- Zinc plated square wire spring
- Rated to 600-Volt maximum in building wiring and 1000-Volt maximum in lighting fixtures and signs
- No pre-twisting required, push stripped conductors into connector and screw on
This wire connector is orange in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
This wire connector is red in color. It is UL listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Flame retardant - thermoplastic shell provides excellent electrical insulation
- Fixed, precise square wire spring provides more securely gripping on conductors
- Sure-grip ribs improve gripping ability and comfort
- Deep skirt entry provides protection from flashover and shorts
This wire connector is tan in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
Blackburn Type H - High Strength Split-Bolt Connector. Conductor Range for Equal Main and Tap 4 Sol-8 Sol, Conductor Range for Min Tap with One Max Main 14 Sol. Both the bolt and nut are made of high-strength corrosion-resistant bronze alloy.
- High strength split-bolt connector
- Conductor range for equal main and tap 4 sol-8 sol
- Bolt and nut of hex design
- UL E9809
10-32 in. x 3/8 in. slotted hexagon-head washer-face ground screw. Green dye finish and 6 in. solid copper #12 AWG insulated wire. Wire comes pre looped at 1 end.
- Pre-looped 6 in. solid copper # 12 AWG insulated wire
- Steel
- #12 AWG insulated wire
- 0-32 x 3/8 in. slotted hexagon-head washer-face ground screw with green dye finish and a 6 in. solid copper #12 AWG insulated wire
Blackburn Dual-Rated Mechanical Connector. Type ADR-ALCUL 2-Conductor, 1-hole Mount, Conductor. Wire range 14 AWG-2/0 Str. Connector is made a tin-plated aluminum.
- Easy installation
- Dual-rated mechanical connector
- 1/4 in.
- UL E9809
Ultra-Whip is a non-metallic conduit constructed with two different PVC materials that are extruded to form a highly flexible product designed especially for electrical applications. A rigid material forms the stiff helical spring, which is completely encapsulated by a second flexible compound. Stranded Copper THHN/THWN conductors and UL Listed LFNC-B Fittings are installed at the factory. 12 in. wire leads with 1/2 in. of stripped insulation are left exposed at each end for hassle-free hook-ups. It is commonly used for connecting air conditioners, pumps, motors, compressors, swimming pool equipment and similar equipment.
- Brand received (Cerrowire or Southwire) varies by zip code
- Highly flexible non-metallic conduit with factory installed conductors
- Stranded copper THHN/THWN insulated conductors
- Green insulated copper grounding conductor
- Liquid-tight flexible non-metallic conduit type B (LFNC-B) fittings
- Intended for 208-Volt/240-Volt/480-Volt single phase circuits
- Resistant to rust, cracks and separation
- Non-metallic raceway is non-conducting
- 600-Volt
Blackburn Type ADR-ALCUL Single-Conductor, 1-Hole Mount, Conductor. Wire range 14 AWG-2Str, Length 1-5/32 in., Width 1/2 in., Height 9/16 in., 1/4 in. Bolt Hole. Made of Tin-Plated Aluminum.
- Type ADR-ALCUL single-conductor
- Conductor range 14 AWG-2Str
- 1-hole mount
- UL E9809
- Easy installation no special tools required
The Southwire 3/4 in. x 6 ft. Liquidtite Whip helps you connect air conditioners, pumps, motors, compressors, swimming pool devices and similar equipment. The ready-to-install whip has a non-metallic conduit formed with 2 different PVC materials. Resistant to rust, cracks and separation.
- Brand received (Cerrowire or Southwire) varies by zip code
- Connects air conditioners, pumps, motors, compressors, swimming pool devices and similar equipment
- Has stranded copper THHN/THWN conductors
- 12 in. wire leads are exposed at each end for hassle-free hookups with 1/2 in. stripped insulation
- Non-metallic conduit is formed with 2 different PVC materials
- UL Listed and CSA certified
Gardner Bender Wire Connectors are engineered to exceed the expectations of professional electricians. Perfect for commercial or residential applications GB Wire Connectors offer world-class quality, performance and application versatility. Use Gardner Bender crimp connectors for strong, vibration-resistant permanent connections in branch circuit and fixture wiring. These connectors are made of zinc-plated steel. They can withstand harsh environments.
- 18 - 10 AWG wire range
- Designed for pressure type connections
- Vibration resistant
- UL and CSA safety listings
This wire connector is red in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Flame retardant - thermoplastic shell provides excellent electrical insulation
- Fixed, precise square wire spring provides more securely gripping on conductors
- Sure-grip ribs improve gripping ability and comfort
- Minimum AWG 1#18 with1#20 - maximum AWG 4 #16 with1 #20
This wire connector is red in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
Southwire Armorlite Type MC Cable is constructed with soft-drawn copper, Type THHN/THWN conductors rated 90 degree C dry available in sizes 14 AWG through 2 AWG and a green insulated grounding conductor. The conductors are cabled together and a binder tape bearing the print legend is wrapped around the assembly. Aluminum interlocking armor is applied over the assembly.
- Brand received (Cerrowire or Southwire) varies by zip code
- Branch, feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings
- Power, lighting, control and signal circuits
- Fished or embedded in plaster
- Concealed or exposed installations
- Environmental air-handling spaces per NEC 300.22 (C)
- Places of assembly per NEC 518.4 and theaters per NEC 520
- Installation in cable tray and approved raceways
- Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) and 645.5(D)(2)
- Conductors are cabled together and wrapped with a binder tape bearing the print legend
- Aluminum interlocking armor jackets
This set of wire connectors includes 5-red wire connectors, 6-yellow wire connectors, 6-tan wire connectors, 4-blue wire connectors and 3-gray wire connectors. It is UL Listed for pressure type wire connectors. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
- Gardner Bender® Cable Ties
- Pkg of 100
- 14"
- Black
- 75 lb tensile strength
- Bundle dia .06 to 4"
- Uv resistant nylon
- No regrind material is ever put back into the system
- Tapered neck minimizes stress at any one point
- Tapered and bent tip assures proper tie direction and easy insertion
- Strap serrations closely spaced to permit fine adjustment while securing bundles
- MFG# 46-315UVB
Blackburn Type APS Tin-Plated Aluminum Dual-Rated Split-Bolt Connector. For Use on Copper, Aluminum Conductors. Conductor Range for Equal Main and Tap 2-8 Str.
- Installs with standard wrenches
- Tin-plated aluminum
- Use on copper, aluminum conductors
- UL E9809
Experience your trusted solution for tough retrofit applications with the Twister Al/Cu purple wire connector. This unique offering is CSA-certified and the only UL-listed aluminum-to-copper twist-on connector on the market. Pre-filled with an antioxidant compound, the connector prevents aluminum oxidation while providing a secure connection. The long entry cap keeps the compound inside while increasing dielectric strength. Grip this connector with ease using its swept wings, then install smoothly as the durable shell flexes. The ribbed cap permits quick and easy installs by hand or with a nut driver. The Twister Al/Cu connector provides your secure and reliable choice for retrofitting older residential buildings with aluminum wiring.
- AL/CU CONNECTIONS: Supports aluminum-to-copper and copper-to-copper applications from #18 to #10 AWG wire - do not use on aluminum-to-aluminum connections
- RETROFIT APPLICATIONS: Perfect for retrofitting older residential buildings with this one-time use connector
- CORROSION RESISTANCE: Prevents oxidation of aluminum conductors with pre-filled antioxidant compound
- PROTECTIVE SKIRT: Extended opening keeps the antioxidant compound inside while increasing dielectric strength
- SECURE CONNECTIONS: UL-Listed to 486C and CSA-Certified to C22.2 #188 for aluminum-to-copper connections up to 600V, as well as the only twist-on solution to comply with NEC Section #110-14 (b)
- HIGH-LEVERAGE WINGS: Engineered for twisting action with comfortable wings, reducing your hand strain
- LIVE-ACTION SPRING: Installs smoothly with a spring that expands and contracts with the aluminum wiring, delivering superior hold strength and quick take-up
- IMPACT STRENGTH: Durable copolymer shell withstands grabbing and pulling from tools
- PACKAGE INCLUDES: Bag of 10 Twister Al/Cu electrical wire connectors
- Warranty: Backed by a 1-year limited warranty on flooring and surfacing products as outlined in MSI guidelines
Terminal service packs are handy and low priced, ideal for small jobs. Porcelain construction for higher temperature applications. Keep a pack on your truck, or use at home.
- Small #3 high heat porcelain wire connector
- 12-10 AWG wire (15-pieces)
- For higher temperatures - up to 1,800F
- Porcelain
- Gardner Bender® 8" Nyn UV Rstant Cble Tes - 75 Punds - Black, Package Of 100
- Pkg of 100
- 8"
- Black
- 75 lb tensile strength
- Bundle dia .06 to 2.19"
- Superior grade uv resistant nylon
- No regrind material is ever put back into the system
- Tapered neck minimizes stress at any one point
- Tapered and bent tip assures proper tie direction and easy insertion
- Strap serrations closely spaced to permit fine adjustment while securing bundles
- MFG# 46-308UVB
- Gardner Bender® Cable Ties
- Pkg of 100
- 11"
- Black
- 75 lb tensile strength
- Bundle dia .06 to 3"
- Uv resistant nylon
- No regrind material is ever put back into the system
- Tapered neck minimizes stress at any one point
- Tapered and bent tip assures proper tie direction and easy insertion
- Strap serrations closely spaced to permit fine adjustment while securing bundles
- MFG# 46-310UVB
This wire connector is red in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
- 600-Volt maximum - minimum AWG 3#18 - maximum AWG 3#10
This wing-type wire connector is tan in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Tough thermoplastic, UL 94-Volt 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
- Rated to 600-Volt maximum in building wiring and 1000-Volt maximum in lighting fixtures and signs
- Minimum AWG 3 #22 - maximum AWG 3 #10
Type NM-B (non-metallic-sheathed cable) may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90 degree C (with ampacity limited to that for 60 degree C conductors) as specified in the NEC 1. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not subject to excessive moisture or dampness. Voltage rating for NM-B cable is 600-Volt.
- Copper conductors are annealed (soft) copper and UL Listed
- Cable is available in a variety of colors, lengths and gauges
- Run in air voids of masonry block and tile walls
- Unique (SlikQuik infused membrane) jacket construction allows for 50% reduction in pulling force resulting in easier installation
- 12-Gauge
- NM-B has 2, 3 and 4-conductors and available with 2 neutrals, construction designed for easier pulling
The Romex Type NM-B Copper Building Wire comes with a patented SIMpull Cable Jacket that significantly simplifies the process of pulling, stripping, and installation. This cable is a familiar choice in residential building wiring, frequently serving as a reliable branch circuit to power switches and outlets. Designed exclusively for above-ground installation in dry settings, it confidently carries a 600-volt voltage rating, emphasizing its durability and performance. Notably adaptable, the NM-B cable can be seamlessly routed through air voids within masonry block or tile walls, as long as these surfaces remain unaffected by moisture. Proudly displaying the Made in America label, this cable effortlessly blends innovation with a commitment to quality craftsmanship.
- NM-B has 2-conductors, 3-conductors and 4-conductors and available with 2-neutrals, construction designed for easier pulling
- Copper conductors are annealed (soft) copper, UL Listed
- Cable is available in a variety of colors, lengths and gauges
- Unique (SlikQuik infused membrane) jacket construction allows for 50% reduction in pulling force resulting in easier installation
Cable Ties are designed for commercial use with wide operating temperature ranges and superior holding power. Cable Ties are manufactured using a superior nylon 6/6 material. All cable ties are UL62275 listed.
- Nylon 6/6
- UL62275
- 175 lb. tensile
- Indoor use
Type APS Tin-Plated Aluminum Dual-Rated Split-Bolt Connector for Use on Copper. Aluminum Conductors. Conductor Range for Equal Main and Tap 6-10 Str. Splicing, tapping or terminating conductors in power and grounding electrical connection.
- Type APS
- Tin-plated aluminum
- Installs with standard wrenches
- UL E9809
The Romex SIMpull 100 ft. 12/2 NM-B Wire features a SIM Technology jacket for wire pulling ease. The solid wire is intended for use in interior residential applications. UL listed.
- Indoor residential electrical wire with a ground
- 100 ft. L
- 12-Gauge
- SIM technology for tear resistance, fast pulling, easy stripping and reduced burn-through
- Copper conductor material
- UL listed and CSA certified
Ultra-Whip is a non-metallic conduit constructed with two different PVC materials that are extruded to form a highly flexible product designed especially for electrical applications. A rigid material forms the stiff helical spring, which is completely encapsulated by a second flexible compound. Stranded Copper THHN/THWN conductors and UL Listed LFNC-B Fittings are installed at the factory. 12 in. wire leads with 1/2 in. of stripped insulation are left exposed at each end for hassle-free hook-ups. It is commonly used for connecting air conditioners, pumps, motors, compressors, swimming pool equipment and similar equipment.
- Brand received (Cerrowire or Southwire) varies by zip code
- Highly flexible non-metallic conduit with factory installed conductors
- Stranded copper THHN/THWN insulated conductors
- Green insulated copper grounding conductor
- Liquid-tight flexible non-metallic conduit type B (LFNC-B) fittings
- Intended for 208-Volt/240-Volt/480-Volt single phase circuits
- Resistant to rust, cracks, and separation
- Non-metallic raceway is non-conducting
- 600-Volt
The Southwire 250 ft. 18/8 thermostat wire features inner conductor material encased in a brown PVC jacket. The solid wire is designed for use in interior residential applications such as thermostats. Thermostat wire is a class 2 power-limited circuit cable.
- Solid copper conductors with 6 mils of polypropylene insulation, conductors are paralleled and covered
- Rated 150-Volt
- Sunlight resistant from -20 degree C to +60 degree C
- UL listed, GreenSpec and RoHS compliant
The Southwire 500 ft. Brown 18/2 Thermostat and Bell Cable is rated to 150-Volt and is classified as class-2 power-limited circuit cable. This thermostat and bell cable offers solid copper conductors with PVC insulation. This thermostat wire is also sunlight resistant.
- For use in heating and air conditioning controls
- Rated -20 degree C to 60 degree C
- Used in bell and alarm systems
- UL Listed
- Flat design
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. These Gardner Bender 1/2 in. Metal Staples (100-Pack) are an excellent choice for applications that require using a stable gun to fasten 2-conductor cables. Recessed head drives faster and protects cable insulation. Pointed legs drive in straight; will not split wood. Virtually Oil-Free for cleaner handling. Sharper tips for easy starting.
- For 2-conductor cable
- Metal construction
- For use with a staple gun
- 1/2 in. wide
- Made from steel for strength
- Secures 2 conductor #10, #12 and #14 non-metallic cable
This wire connector is yellow in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
- Approved for the following wire combinations: 2-5 #18, 2-3 #16, 1-2 #16 + 1-2 #18, 1 #16 + 3-4 #18, 1 #14 + 1-3 #18, 1 #14 + 1 #16
Cable Ties are designed for commercial use with wide operating temperature ranges and superior holding power. Cable Ties are manufactured using a superior nylon 6/6 material. All cable ties are UL62275 listed.
- NYLON 6/6
- UL62275
- UV RATED
- OUTDOOR USE
Blackburn Dual-Rated Mechanical Connector. Type ADR-ALCUL Two-Conductor, One-Hole Mount, Conductor. Wire range 14 AWG-2/0 Str. Connector is made a tin-plated aluminum.
- Conductor range 14 AWG-2/0 Str
- Tin plated
- 1-hole mount
- UL E9809
IT series insulated-tap connectors are suitable for connecting 2-wires. Which are provided with open wire entry ports on both sides of the connector, which allows for access from either side. This style is supplied with removable access plugs to close the entry port not being utilized.
- Abrasion and chemical resistant, UV rated
- Will not support combustion
- Cold temperature rated to -45 degree C
- Dual rated for use with copper and/or aluminum cables, 600-Volt
- 90 degree C, not recommended for fine-stranded, flexible wire, UL Listed
3M R/Y plus Wire Connectors feature 3 connector sizes with increased range to handle the work of 7 standards connectors. R/Y plus Wire Connectors simplify selection of the right connector for a wide range of wiring jobs. Easy to use and convenient, 3M R/Y plus Wire Connectors reduce necessary inventory and help ensure the right connector is always on hand.
- 2 connector replaces 2
- Provides a quick bite
- Flexible safety skirt
- Wire range 2 #18 - 2 #8
- UL Listed wire connectors
- 100 connectors per box
Vinyl spade terminals have open tongue end for rapid insertion on the mounting screw. Typically used on free-standing studs. The insulation type is vinyl.
- 300-Volt
- Funnel-entry feature eliminates wire strand "hang-up" and increases crimping speed with reliability
- Continuous-duty temperature range of -40 degree F to 194 degree F (-40 degree C to 90 degree C)
- Butted seam
The Southwire 500 ft. Brown 18-5 Thermostat and Bell Cable is designed for use in heating and air conditioning controls as well as in alarm systems. This cable offers a flat design. The insulation is made of 6 mils of polypropylene and a brown PVC jacket.
- UL listed
- Designated as class-2 power-limited circuit cable
- Rated at 150-Volt
- Solid copper conductors
Vinyl ring terminals have basic tongue type ring terminal. Provides safe and reliable connections. It cannot be disconnected unless the screw is completely removed.
- Wire size: 16-14 AWG
- Stud size: 1/4 in.
- Electro-tin-plated copper, vinyl (PVC)
- 600-Volt, 75 degree C
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. The Improved Metal Staple secures non-metallic (NM) cable. The recessed head drives faster and protects cable insulation. These staples are a preferred length and have sharper tips so the legs drive in straight without splitting wood. For clearer handling the staples are virtually Oil-Free.
- Secures all types of NM cable
- Recessed head drives faster and protects cable insulation
- Sharper tips for easy starting
- Metal construction with a graphite metallic finish
- Made from steel for strength
- Secures 2 conductor #10, #12 and #14 non-metallic cable
Vinyl ring terminals have basic tongue type ring terminal. Provides safe and reliable connections. It cannot be disconnected unless the screw is completely removed.
- Wire size: 12-10
- Stud size: #10
- Butted seam
- Electro-tin-plated copper, vinyl (PVC)
- 600-Volt, 75 degree C
IT series insulated-tap connectors are suitable for connecting 2-wires. Which are provided with open wire entry ports on both sides of the connector, which allows for access from either side. This style is supplied with removable access plugs to close the entry port not being utilized.
- Abrasion and chemical resistant, UV rated
- Will not support combustion
- Cold temperature rated to -45 degree C
- Dual rated for use with copper and/or aluminum cables, 600-Volt
- 90 degree C, not recommended for fine-stranded, flexible wire, UL Listed
Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.
- Branch, feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings
- Made with annealed (soft) copper, compressed stranded
- Insulation is high heat and moisture resistant polyvinyl chloride (PVC)
- Jacket is abrasion, moisture, gasoline and oil resistant nylon
- THHN is rated for 600-Volt
- UL Listed and CSA certified
This kit contains heavy wall adhesive lined, flexible cross-linked polyolefin heat shrinkable tubing. Designed for the new smaller O.D. lead wire being used on submersible pump motors. This tubing is suitable for applications up to 600-Volt providing excellent waterproof insulating and environmental sealing protection for connections. High impact and abrasion resistance of this heavy wall tubing provides the highest level of mechanical durability. When heated above 250 degree F (120 degree C) there is a 3:1 shrink ratio. Tubing will shrink unrestricted to 33% of its original diameter, the recovered wall thickness of the tubing is proportional to the degree of recovery (approximately 0.08 in./2 mm when fully recovered).
- For splicing #14, #12, #10 cable to 3-wire submersible pump motors
- Will work with newer smaller diameter submersible lead wires
- Shrinks to a durable abrasion resistant skin tight fit
- When heated above 250 degree F (120 degree C) tubing shrinks forcing adhesive to flow which forms a permanent non drying waterproof barrier that remains flexible
- Fast recovery heat shrink tubing
Southwire split bolts are used in applications such as splicing, tapping, and terminating conductors in grounding applications. This bolt is dual-rated for 2 dissimilar metal conductors. Specified for use with #8 STR - #2 STR Wire.
- cULus listed
- Run: # 8 STR - # 2 STR
- Tap: # 8 STR - # 2 STR
- Dual-rated for Al and Cu conductors
- Rated 600-Volt / 90C
- 1-pack
The Southwire 3/4 in. x 4 ft. Liquid tight Whip helps you connect air conditioners, pumps, motors, compressors, swimming pool devices and similar equipment. The ready-to-install whip has a non-metallic conduit formed with 2 different PVC materials. Resistant to rust, cracks and separation.
- Brand received (Cerrowire or Southwire) varies by zip code
- Connects air conditioners, pumps, motors, compressors, swimming pool devices and similar equipment
- Has stranded copper THHN/THWN conductors
- 12 in. wire leads are exposed at each end for hassle-free hookups with 1/2 in. stripped insulation
- Non-metallic conduit is formed with 2 different PVC materials
- UL Listed and CSA certified