Levitons family of medical-grade power strips are designed explicitly for use in health care facilities, including patient care spaces as defined by NEC Article 517. These devices also satisfy electrical safety requirements specified in NFPA 99: Health Care Facilities Code, allowing facility managers to ensure that their facilities are compliant with this safety regulation. Surge-protective models are UL 1449 compliant, providing the ultimate protection against voltage surges that can damage or diminish the performance of sensitive electronic equipment.

• Amperage: 15 Amp
• Voltage: 125-Volt
• Frequency: 60Hz
• Surge technology: MOV

Power surges are the silent killer for home appliances and HVAC equipment. Most homeowners protect their electronics, but leave more valued equipment unprotected. Surges can wipe out equipment and leave you searching for answers. Search no more. The easy-to-install AG3000 Surge Protective Device (SPD) is the perfect add-on, for HVAC equipment. A green LED indicator provides the status of protection. Trusted, state-of-the-art TPMOV (Thermally Protected Metal Oxide Varistor) technology eliminates the potentially hazardous failure modes that are commonly associated with standard MOV technology. UL Listed to ANSI/UL 1449, 4th Edition.

• 3 modes of protection: L-G, L-L, L-N
• TPMOV surge Protection technology
• Green LED indicator provides status of protection
• Type 4X watertight and UV resistant plastic enclosure
• 3-year product warranty
• $7,500 connected equipment warranty for 3-years
• UL Listed to ANSI/UL 1449 4th Edition
• Number of leads: 3
• Lead length: 18 in.
• Lead gauge: #10 AWG
• Wiring config: L1, L2, L/N-G

Our homes are filled with sensitive electronics. These devices are easily damaged by common power surges in your electrical, telephone and cable lines. It only takes a lightning storm near your home to create a high-energy electrical surge that can enter your house and destroy your appliances, TVs, stereo equipment and almost all other modern electrical products. The Eaton surge products are designed to provide protection at the point of entrance to the home. Protection at this location can reduce surges entering the home to an acceptable level for your home electronics and appliances.

• Does not protect against direct lighting strikes
• Externally mounted making it universal - compatible with any manufacturer's load center
• Product should be connected on the load side of the load center main service disconnect through a dedicated circuit breaker
• Product is recommended to use a 2-pole 50 Amp circuit breaker, sold separately
• Eaton's complete home surge protection type 2 devices (CHSPT2 Series) protect your home electronics from the damaging effects of electrical surges
• Provide premium surge protection for AC power and cable at the point of entrance to the home
• CHSPT2 family of products require a dedicated 2-pole 50 Amp thermal magnetic breaker
• Externally mounted making it universal - compatible with any manufacturer's load center or breaker box

The Woods 14/3-Gauge 6-Outlet 1440-Joule Surge Protector features 1440-Joules of surge protection and protects household electronics from sudden changes in electrical Voltage, including when heavy-duty home appliances are turned on and off. The product safely converts a standard outlet into (6) surge protected grounded outlets. Use with household electronics such as digital radios, cordless phones, portable stereos plus much more. The extra-long 15 ft. cord eliminates the need for additional extension cords and the metal housing lasts a long time. The Woods 14/3-Gauge 6-Outlet 1440-Joule Surge Protector comes with a 1-year limited warranty that protects against defects in material and workmanship.

• Strip comes in standard yellow
• Strip is visible in most rooms
• Strip is UL listed
• Comes with a 1-year limited warranty

Square D brand Home Electronics Protective Devices (HEPDs) are compact and affordable surge suppressors designed and is compatible for any brand residential load centers. HEPDs work together with surge protection plug strips to provide surge suppression for sensitive electronics. HEPDs reduce surges that might otherwise overwhelm plug strips and damage connected household equipment. HEPDs also provide surge suppression for important items such as washers, dryers, refrigerators, stoves, and air conditioning that plug strips may not or cannot protect.

• 80,000 Amp/phase maximum surge current
• Compatible with any brand breaker box
• LED status indicators
• Industry leading design and product testing
• For installation in 120/240-Volt AC systems
• ANSI certified and UL 1449 3rd edition listed
• NEMA type 4X rated for indoor or outdoor use
• Works with all residential panel amp ratings

Leviton Type 1 Surge Protective Device 120/240 VAC Split Phase Designed For Residential Applications, The R Series Is Compact In Size And Easy To Install Leviton surge protective devices (SPDs) divert damaging voltage transients, or surges, away from electronic equipment Mfg #020-R2120-00B

• Designed For Residential Applications
• Leviton surge protective devices (SPDs) divert damaging voltage transients, or surges, away from electronic equipment
• The R Series Is Compact In Size And Easy To Install
• 020-R2120-00B

Square D brand Home Electronics Protective Devices (HEPDs) are compact and affordable surge suppressors designed for residential load centers. HEPDs work together with surge protection plug strips to provide surge suppression for sensitive electronics. HEPDs reduce surges that might otherwise overwhelm plug strips and damage connected household equipment. HEPDs also provide surge suppression for important items such as washers, dryers, refrigerators, stoves and air conditioning that plug strips may not or cannot protect.

• LED status indicator
• Industry leading design and product testing
• 120-Volt/240-Volt AC applications
• ANSI certified and UL 1449 4th edition listed
• NEMA type 4X rated (indoor/outdoor)
• 3-year, $30,000 limited warranty
• NEC 2020 compliant
• Works with all residential panel amp ratings

Our homes are filled with sensitive electronics. These devices are easily damaged by common power surges in your electrical, telephone and cable lines. It only takes a lightning storm near your home to create a high-energy electrical surge that can enter your house and destroy your appliances, TVs, stereo equipment and almost all other modern electrical products. The Eaton surge products are designed to provide protection at the point of entrance to the home. Protection at this location can reduce surges entering the home to an acceptable level for your home electronics and appliances.

• Does not protect against direct lighting strikes
• Externally mounted making it universal - compatible with any manufacturer's load center
• Product should be connected on the load side of the load center main service disconnect through a dedicated circuit breaker
• NEMA 4 enclosure for either indoor or outdoor use
• Eaton's complete home surge protection type 2 devices (CHSPT2 Series) protect your home electronics from the damaging effects of electrical surges, they provide premium surge protection for AC power and cable at the point of entrance to the home, protection at this location can reduce surges entering the home to an acceptable level for your home electronics and appliances
• Recommended to use a 2-pole 15 Amp circuit breaker, sold separately

The Square D by Schneider Electric SDSA1175 is a hardwired Type 1 Surge Protective Device is NEMA 4X rated and is suitable for both indoor and outdoor applications. This SPD is rated at 36,000 Amp Maximum Surge Current Rating and has a intended for use with any brand of pumps, motor applications and service-entrance locations. The unit is designed for hardwired usage and features an LED to indicate its operational status.

• Use for pumps, motor applications and service-entrance locations
• Compatible with any brand breaker box
• 36,000 Amp maximum capacity
• 25,000 SCCR
• NEMA 4 rated enclosure for indoor or outdoor use
• LED indicates operational status
• Provides equal protection to all circuits and receptacles
• For indoor or outdoor use
• Meets NEC 2020 requirements
• ANSI certified and CSA and UL 1449 3rd edition listed
• For installation in 120/240-Volt AC systems

The Multi-media 7-Outlet Surge Protector protects household electronics from surges, spikes and other electrical imbalances that can occur on your home power, phone, coaxial cable, antenna, satellite and broadband modem lines. The red surge LED indicator illuminates to show the unit is working properly and that your connected equipment is surge protected. The green ground LED indicator illuminates to show the unit is plugged into a properly grounded wall receptacle. The surge protector has (7) grounded 3-pronged outlets, a 6 ft. power cord and (2) transformer outlets. The transformer outlets are specially spaced apart to accommodate larger adapter plugs without blocking use of other outlets. The Multi-media 7-Outlet 2500-Joule Surge Protector comes with a 200,000-dollar connected equipment warranty that provides the peace of mind knowing your valuable electronics are covered.

• Features 2500-joules of surge protection, 7 grounded 3-pronged outlets, 1-in/1-out satellite/cable coax protection, 1-in or 2-out phone/fax/DSL protection, (2) transformer outlets, a surge indicator and a ground indicator
• 6 ft. power cord with right angle plug that allows you to move furniture closer to your wall
• Sliding safety covers to protect children from accidentally inserting objects into unused outlets
• EMI/RFI noise filter allows clean power to enter your equipment and reduces harmful noise
• Comes with a 200,000-dollar connected equipment warranty protection

Levitons family of medical-grade power strips are designed explicitly for use in health care facilities, including patient care spaces as defined by NEC Article 517. These devices also satisfy electrical safety requirements specified in NFPA 99: Health Care Facilities Code, allowing facility managers to ensure that their facilities are compliant with this safety regulation. Surge-protective models are UL 1449 compliant, providing the ultimate protection against voltage surges that can damage or diminish the performance of sensitive electronic equipment.

• Amperage: 20 Amp
• Voltage: 125-Volt
• Frequency: 60Hz
• Surge technology: MOV

Not long ago, we turned knobs and dials to change TV channels or set wash cycles. Now, we're in the Internet of Things (Iot) era where homeowners are increasingly reliant upon connected devices. To ensure these devices 'just keep working', today's home requires constant surge protection. Knowing when a surge protector needs to be replaced is the KEY to remaining protected. Therefore, we developed FirstSurge, our commercial class total home surge protector. Installed at your load center, FirstSurge will stop surges before they get into your home. FirstSurge offers three grades of robustness to ensure long operational life depending upon the storm activity where you live. The key to remaining surge protected is knowing when a surge protector needs to be replaced. The gap of time between a surge protector wearing out until it is replaced is the time when your home is vulnerable to being hit by surges. When FirstSurge wears out, its commercial class 3-stage notification diagnostics immediately alerts you that it needs replacing. This type of notification results in a far shorter Mean Time Before Surge Protection Restoration (MTBSPR) when compared to standard whole house protectors equipped only with LED diagnostics. Knowing you're surge protected with commercial class protection gives you peace of mind that your smart appliances and electronics will always be surge protected. Make Siemens FirstSurge the first surge protector installed into your home.

• When there is a problem, Siemens FirstSurge takes the guesswork out of knowing when it is time to be replaced; an audible alarm beeps, the green LED lights on the device will extinguish and the red service light will flash
• FirstSurge is equipped with ground reference monitoring notifying you a rare safety hazard exists due to a compromised electrical system neutral to ground bond; in this case an audible alarm will beep, the green LED lights on the device will remain lit and the red service light will flash
• FirstSurge power provides 60,000 Amp of surge current capacity per phase
• For those looking for added robustness or who live in areas with higher number of thunderstorms consider upgrading to our FirstSurge Plus (100,000A) or FirstSurge Pro (140,000 A) models
• Surge exposure map correlating storm frequency and intensity with increasing FirstSurge capacities; any FirstSurge will protect in all regions, but selecting the recommended surge current capacity increases robustness to ensure lasting protection
• FirstSurge balanced 600-Volt protection ratings means every primary paired conductor (line to neutral, line to ground and neutral to ground) will knock down surge over voltages to safe levels
• Every FirstSurge electrical AC service protector is equipped with worry free commercial class 3-stage notification; when FirstSurge wears out, its audible alarm will beep, protection status LED/s extinguish and red service LED flashes
• When 3-stage notification activates, you turn off FirstSurge dedicated breaker and you contact your electrician to arrange for installation of replacement unit
• FirstSurge can be used to surge protect any load center brand when connected to a 30 Amp or less 2 pole circuit breaker
• Every FirstSurge electrical AC service protector is assigned underwriters laboratories highest robustness nominal discharge current of 20kA
• FirstSurge is designed to surge protect standard residential split phase 120/240, 60 Hz system voltage
• FirstSurge is constructed using our commercial grade NEMA 4X enclosure allowing for indoor or outdoor installations
• FirstSurge Surge Protective Devices (SPDs) are Type 2 and UL / cUL listed, meeting designated protection requirements

The 51110-001 Residential Surge Protection Panel is designed for mounting at the service entrance in homes, apartments and condominiums. It offers advanced surge protection for modern electronics and appliances, reducing the risk of damage from spikes and surges entering the property through AC power lines. The unit shall provide type 4X housing for indoor and outdoor installations.

• Surge protection for 240-Volt/120-Volt, 50 Hz/60 Hz single-phase AC power lines
• Real-time diagnostic visual indicator shows power and suppression status for each protected phase
• UL1449 3.0 edition rated for 600V peak clamping voltage (L-N, L-G, N-G)
• DHC power line carrier compatible
• Separate surge suppression indicator lights stay on for phase 1 and phase 2 until protection is lost