Searched for "39121300"
The Carlon 1-Gang 18 cu. in. round old work ceiling box is designed for use with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for residential and light commercial applications, the box is made of Polycarbonate, is listed for use with dry wall or sheet rock. The box is fire rated and UL Listed for safety.
- 1-gang electrical box houses an installed ceiling switch or receptacle
- Not intended for fixture or support in ceilings
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- Mounting ears and swing clamps provide versatile installation options
- Sized for standard devices and switches
The Super Blue New Work Round 25 cu. in. Non-Metallic Hard-Shell Ceiling Box is designed to not break or crack, even in extreme conditions. It is made with thermoplastic PVC for durability. Its hard-shell resists flexing and holds its shape in bad conditions and the box is fire rated and UL listed to help ensure safety.
- Listed for use with fixture support up to 50 lb.
- Designed to not break or crack, even in extreme environments
- Captive nails for wood stud mounting
- 3/0 and 4/0 mounting holes
- UL listed and 2-hour fire rating
Used to close an outlet box. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- Flat, 1/2 in. center knockout
- Made of 0.0625 pre-galvanized steel
- cULus Listed
Used to house wiring devices such as switches or outlets. Acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Nine 1/2 in. knockouts
- UL Listed
- 18.0 cu. in. capacity
- Plaster ears
Used to house wiring devices such as switches or outlets. Steel boxes are acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Eight 1/2 in. knockouts
- UL listed
- 12.5 cu. in. capacity
- Plaster ears
The Vertical 21 cu in. PVC 1-Gang Wall Box Adjust-a-box with Adjustable Bracket for Vertical Mount is designed to allow adjustment of depth after the wall covering has been installed. Adjusts to any wall covering. The Zip Box Blue 1-Gang 20 cu. in. Old Work Non-Metallic Switch and Outlet Box are designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Typical uses are in kitchens and bathrooms
- Protects indoor wiring from impacts, dust and wear
- Thermoplastic construction resists rust and won't conduct electricity
- Mounts to standard wood or metal stud horizontally
- Convenient adjustable bracket for ease of installation
- UL Listed
The Carlon Zip Box Blue 2-Gang 25 cu. in. Old Work Non-Metallic Switch and Outlet Box are designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL Listed to help ensure safety.
- Residential and commercial use
- Use with non-metallic cable on accordance with code
- Thermoplastic construction resists rust and won't conduct electricity
- Mounting ears and swing clamps provide versatile installation options
- Sized for standard devices and switches and extra capacity for wiring and/or larger devices
- Built-in cable clamps hold wires firmly in place
- For safety, product is UL Listed and fire rated
Square boxes are manufactured from durable pre-galvanized steel and designed to house and protect electrical wiring, switches, receptacles and to support light fixtures. All steel boxes are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. 8-32 cover mounting screws are assembled.
- 4-11/16 in. square x 2-1/8 in. deep
- (1) 1/2 in. and fifteen TKO knockouts
- Combination Phillips/slotted screw heads
- Welded steel construction
The 14 cu. in. PVC Old Work Electrical Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. This item is great for light commercial and residential applications. The box is crafted with non-conductive PVC for durability and is fire rated and UL Listed to help ensure safety.
- For residential and commercial old work applications including masonry walls
- Sized for standard devices and switches
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- UL Listed and 2-hour fire rating for safety
Surface mounted enclosure without entrance hubs which allows multiple conduits to be connected and wire splices made within. Appropriate round hole for conduit entrance must be cut. Male adapters or box adapters may be used to secure conduits to the box. May be concrete encased or buried but not warranted or listed to be watertight for all circumstances.
- 2 in. x 12 in. x 4 in.
- Corrosion resistance and physical properties needed for direct burial applications
- NEMA 6P rating per section 314
- UL E88685
Used to mount 2-devices, such as switches or receptacles. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- 1/2 in. raised, drawn
- May use low voltage partition to conduit type boxes to divide power from voice/data
- UL Listed, CSA
- 5.5 cu. in. capacity
Provides weatherproof protection when an outlet is in use. Made from high-impact polycarbonate construction providing maximum durability. An attached gasket, mounting hardware and installation instructions included.
- Quick-fit keyhole mounting system allows cover installation under a minute
- Pre-configured for GFCI with patented knock-out technology for alternate devices
- Lockable tab
- 16-in-1 configurations
- Horizontal or vertical mount
- NEMA 3R compliant
Used for mounting switches or receptacles. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- 5/8 in. raised
- UL Listed, CSA
- 4.5 cu. in. capacity
RACO KWIK-BRACE is a heavy-duty ceiling fan brace designed for new or existing construction where joists are accessible. Slides apart to accommodate joist spacing from 16" to 24" screws provided. Easy to follow instructions and mounting hardware included.
- #10-32 ceiling fan screws provided and #8-32 ceiling fixture mounting provision, metal protection plate provided
- Nail spurs for easy positioning
- Up-front ground screws for easy installation
- Easy to follow instructions and mounting hardware included
The Junction Box features a foam-in-place gasketed lid with stainless steel screws. It is designed to provide protection against falling dirt, hose-directed water, water entry during prolonged submersion and external ice formation. The box is made with a thermoplastic material and is CSA and UL listed to help ensure safety.
- Protects against external ice, dirt and water
- Features a formed-in-place foam gasket lid
- CSA and UL listed and suitable for both indoor and outdoor use
- Designed to not rust or corrode
- NEMA type 6P and type 4/4 ratings
- CSA and UL listed for safety
Bell Weatherproof covers designed to expand from an inch to 3" while an outlet is in use. EXTRA DUTY rated. An attached gasket, mounting hardware and installation instructions included.
- Quick-fit keyhole mounting system allows cover installation under a minute
- Clear window allows for quick/easy visual inspection
- 100% paintable surface
- 16-in-1 configurations
- NEMA 3R compliant
- EXTRA DUTY rated
The 1-Gang Non-Metallic New Work Box with Bracket is great for residential and light commercial applications. It is made with PVC and works with non-metallic sheathed cable in accordance with Article 314 of the NEC. The box can mount to steel and wooden studs and is suitable for masonry walls.
- Use with non-metallic sheathed cable in accordance with article 314 of the NEC
- For residential and light commercial use
- Suitable for masonry walls
- Sized for standard devices and switches
- Thermoplastic construction resists rust and will not conduct electricity
- UL Listed to UL514C and fire rated for safety
- Meets NEMA OS-2
- Bracket for 3/8 in. to 5/8 in. wallboard, steel and wood stud mounting
- Product has pry outs
The 1-Gang 18 cu. in. Type FSE FS Electrical Box is designed for use in dead-end terminations. Durable PVC construction, this box will not rust or corrode when used in outdoor applications. The integral mounting feet make installation quick and easy. The FSE box is UL Listed and can be used in both indoor and outdoor applications.
- Single gang FSE box with 1 in. hubs
- PVC construction for durable performance
- Integral mounting feet provide easy mounting
- UL Listed
- Integral mounting feet for easy mounting
- 18 cu. in. capacity size for standard devices
The Carlon Zip Box Blue 2-Gang 32 cu. in. Non-Metallic Switch and Outlet Box is designed for use with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for residential and light commercial applications, the box is made with PVC, is listed for use with masonry walls and can be used with 90 degree C conductors. It meets NEMA OS-2 and is fire rated and UL listed for safety.
- Use with switches and outlet devices in new work applications where the wall is not already installed
- Sized for standard devices and switches
- Thermoplastic construction resists rust and won't conduct electricity
- Captive nails included
- UL Listed
- 2-hour fire rating
Provides protection for an outdoor receptacle or switch. Made from superior commercial quality die-cast metal. Premium powdercoat finish provides corrosion resistance. Includes a gasket, mounting hardware and instructions.
- State-of-the-art powdercoat finish provides maximum weatherability and scratch resistance
- Pre-configured for GFCI with knock-out technology for alternate devices
- Lockable tab
- 12-in-1 configurations
- Horizontal or vertical mount
- NEMA 3R Rated
Designed with the electrician in mind. The Original Smart Boxes are unmatched in versatility in new work locations where you cannot swing a hammer or where final wall surfaces are uncertain, like kitchens and baths. They are unmatched in old or retrofit work.
- Available in 1, 2, 3 and 4-gang and horizontal
- Step down feature allows for wire entrance in both top and bottom of box
- Heavy-duty 42 lbs. mounting screws supplied
- Mounts to wood or metal stud 25 g
- Adjustable depth
- Extra thick PVC wall material creates stability and rigidity
- Built-in wire clamps
- All 6/32 device holes are threaded
- RoHS compliant
- UL listed
- Material: PVC
The Carlon Zip Box Blue 1-Gang 20 cu. in. Old Work Non-Metallic Switch and Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the National Electric Code. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Use for old work applications in residential or commercial remodeling projects
- Designed for use with non-metallic sheathed cable and listed for masonry walls
- Sized for standard devices and switches and extra capacity for wiring and larger devices
- Thermoplastic construction resists rust and will not conduct electricity
- Built-in cable clamps hold wires firmly in place
- Mounting ears, swing bracket and captive nails provide wide range of installation options
- PVC construction is classified for 2-hour fire wall rating
- Meets NEMA OS-2, UL listed UL514C, E11461 and R9140
TAYMAC in-use device covers provide weatherproof protection when an outlet is in use. In-use covers are made are made from high-impact polycarbonate construction providing maximum durability. An attached gasket, mounting hardware and installation instructions are included.
- Patented quick-fit keyhole mounting system allows cover installation under a minute
- Pre-configured for GFCI with patented knock-out technology for alternate devices
- Horizontal or vertical mount
- Lockable tab (1/4 in. shackle)
- 16-in-1 configurations
- 2-3/4 in. deep
- NEMA 3R compliant
12 cu. in. handy box is a non-metallic switch and outlet box. Unlike metal boxes, the PVC handy box comes with 2 integral cable clamps that hold non-metallic cable firmly in place. The handy box comes with 6 knock-outs on the sides and back for easier wiring and a variety of mounting options.
- Designed for use with non-metallic conduit systems and non-metallic sheathed cabling
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- Six 1/2 in. knockouts
- UL Listed and 2-hour fire classified for walls and ceilings
- Accepts Carlon handy box covers: blank, toggle, duplex and GFCI
Made from durable pre-galvanized steel. Designed to cover and protect electrical wiring, switches and receptacles. UL and CSA Listed. Captive device screws.
- Key-hole allows for installation of cover without removing the box screws
- Blank cover
- Flat
- Meets UL and CSA compliance
BELL offers a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. Reinforced connector outlets provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included.
- State of the art powdercoat finish provides maximum weatherability and scratch resistance
- Rugged die cast aluminum construction
- Internal hub threads comply with NEMA requirements and will accept all threaded fittings and threaded conduit
- 8-box mounting options with detachable lugs
- 18.3 cu. in. capacity
- 2 in. deep
- NEMA 3R compliant
The 1-Gang 18 cu. in. Type FSE FS Box is designed for dead-end terminations. The box is crafted with non-corrosive PVC for durability and features integral mounting feet for easy installation. It is UL Listed for safety.
- Type FSE box for use with dead-end terminations
- One 1/2 in. hub
- Durable PVC construction will not rust or corrode
- UL Listed
- Integral mounting feet for easy mounting
- 18 cu. in. capacity size for standard devices
Raco 1-1/2 in. deep ceiling fan rated box is designed, tested, and UL listed for the dynamic loads of ceiling fans. Use this product when replacing an existing ceiling fan. Designed with the installer in mind, and rich in time saving features. A variety of products are available to meet nearly every application. Raco's Insider connector is included for use with non metallic sheathed cable.
- Durable pre-galvanized steel construction
- With proper fitting can be used for conduit, NMSC, armored, metal clad, or flex cable
- Plastic insider provided for nonmetallic sheathed cable
- 15.8 cu. in. capacity
- Maximum support load for ceiling fans 70 lbs. and 110 lbs. at 16 in. for static light fixtures
- Mounting hardware and instructions are included
Designed to provide protection for an outdoor receptacle. Self-closing lid. Mounts to device.
- Self-closing lids provide weatherproof protection when the receptacle is not in use
- State-of-the-art powder coat finish provides maximum weather ability and scratch-resistance
- Duplex cover
- Horizontal mount
- Rugged metallic construction
- NEMA 3R compliant
- Installation hardware, gasket and multi-lingual instructions are included
Used for convenience outlets, switch boxes or small junction boxes. Popular for exposed work applications. Surface-mounted wiring requires the wiring to be enclosed with a protective covering such as EMT conduit.
- Drawn construction
- (10) 1/2 in. knockouts
- UL Listed
- 13.0 cu. in. capacity
- Raised ground
- Acceptable in 2-hour fire rated walls
Surface covers used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications. Exposed work covers are 1/2 in. raised. Complies with 2020 NEC Article 250.146 (A) and cULus Listed.
- Driven screws and break-off lock nuts included
- Meets the requirements of the 2020 NEC article 250.146 (A)
- 6.5 cu. in. capacity
- Hardware installation instructions preprinted on packaging
Ceiling support boxes are designed for ceiling fans and ceiling or wall light fixture support. To be directly mounted to a joist. #10-32 ceiling fan and #8-32 provision for fixture mounting screws. Easy installation, up-front ground screw.
- No protruding ground screw or fan mounting screws
- Metal protection plate eliminates debris or damage to wiring
- INSIDER nonmetallic sheathed cable connector included
- 70 lbs. ceiling fan, 150 lbs. fixture support
- Easy-to-follow instructions and mounting hardware included
- 2-1/8 in. deep
- 1/2 in. side knockout
Manufactured from durable pre-galvanized steel. UL and CSA Listed. Captive device screws.
- Cover made from zinc, pre-coated, steel
- Houses duplex receptacle
- Cover includes captive mounting screws
- Meets UL and CSA compliance
Weatherproof device covers are designed to provide protection for an outdoor receptacle. Covers have a self-closing lid. Covers mount to device.
- Self-closing lids provide weatherproof protection when the receptacle is not in use
- State-of-the-art powder coat finish provides maximum weatherability and scratch resistance
- Horizontal mount
- Rugged metallic construction
- NEMA 3R compliant
- NEMA 3R rated
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches, and receptacles. UL Listed and acceptable for use in 2-hour fire rated walls. Device mounting holes pre-tapped to accept 6-32 device screws.
- 3 in. x 2 in. x 1-1/2 in. Deep
- Non-gangable
- L clamps provided for non-metallic sheathed cable
- Plaster ears for cut-in or old work applications
- 7.5 cu. in. capacity
The Carlon Zip Box Blue 3-Gang 55 cu. in. Old Work Non-Metallic Switch and Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the National Electric Code. The product is great for light commercial and residential applications. The box is crafted with non-conductive PVC for durability and is fire rated and UL Listed to help ensure safety.
- Sized for standard devices and switches and extra capacity for wiring and larger devices
- Compatible with NMSC
- Thermoplastic construction resists rust and won't conduct electricity
- Mounting ears and swing clamps provide versatile installation options
- Built-in cable clamps hold wires firmly in place
- UL Listed and 2-hour fire rating for safety
Weatherproof device covers provide protection when an outlet is in use. Made from high-impact polycarbonate construction providing maximum durability. An attached gasket, mounting hardware and installation instructions are included.
- Patented quick-fit keyhole mounting system allows cover installation under a minute
- Pre-configured for GFCI with patented knock-out technology for alternate devices
- Lockable tab (1/8 in. shackle)
- 55-in-1 configurations
- NEMA 3R compliant
Ceiling Box Cover used to cover unused 3-1/2 in. and 4 in. round and octagonal boxes prior to the installation of a fan or fixture. It has a deep cover that works with pan boxes without the need to cut the post. It is an attractive cover and the screws don't show on the ceiling.
- Bracket has 2 separate cover mounting options, threaded post pushes in for flat ceilings or screws on for textured/uneven ceilings
- Use #8 screws provided or back out existing screws to accept notched bracket
- Plastic eliminates the scratches you get with painted metal covers
- Covers poorly cut drywall
- Non-rusting, paintable plastic
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled.
- Ideal for exposed work applications
- Combination screw heads allow quick installation
- Drawn construction
- (10) 1/2 in. knockouts and six 3/4 in. knockouts
- UL Listed
- 21.0 cu. in. capacity
- Acceptable in 2-hour fire rated walls
The Junction Box is UL listed with a NEMA 6P rating per Section 314.29, Exception of the NEC. The box is made with a thermoplastic material and features a gasket lid attached with stainless-steel screws. It provides protection against falling dirt, hose-directed water, external ice formation and the entry of water during prolonged submersion.
- For indoor and outdoor use
- Thermoplastic construction for durability
- Gasketed lid attached with stainless-steel screws
- Designed to not rust or corrode
- NEMA 6P and type 4/4X ratings
- CSA and UL listed and fire rated to help ensure safety
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled. Suitable for use without a bonding jumper in circuits up to 600-Volt.
- Combination screw heads allow quick installation
- Welded construction
- (8) 1/2 in. knockouts and four TKO knockouts
- UL Listed
- 30.3 cu. in. capacity
- Raised ground
- Acceptable in 2-hour fire rated walls
Surface covers used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications. Exposed work covers are 1/2 in. raised. Complies with 2020 NEC Article 250.146 (A) and cULus Listed.
- Driven screws and break-off lock nuts included
- Meets the requirements of the 2020 NEC article 250.146 (A)
- 6.5 cu. in. capacity
- Hardware installation instructions preprinted on packaging
Surface covers used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications. Exposed work covers are 1/2 in. raised. Complies with 2020 NEC Article 250.146 (A) and cULus Listed.
- Driven screws and break-off lock nuts included
- Meets the requirements of the 2020 NEC article 250.146 (A)
- 6.5 cu. in. capacity
- Hardware installation instructions preprinted on packaging
Surface covers used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications. Required hardware for mounting the receptacle is provided. Installation instructions are preprinted on the polybag for convenience.
- Raised 1/2 in.
- 1.406 in. Dia receptacle
- 6.5 cu. in. capacity
- Meets 2014 NEC Article 250.16 (A)
In-use device covers provide weatherproof protection when an outlet is in use. Made from high-impact polycarbonate construction providing maximum durability. An attached gasket, mounting hardware and installation instructions are included.
- Quick-fit keyhole mounting system allows cover installation under a minute
- Pre-configured for duplex with patented knock-out technology for alternate devices
- Lockable tab
- 55-in-1 configurations
- Vertical mount
- NEMA 3R compliant
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled. Suitable for use without a bonding jumper in circuits up to 600-Volt.
- TKO knockout design provides installation flexibility
- FS style bracket, flush
- Welded construction
- (9) 1/2 in. knockouts and five TKO knockouts
- UL Listed
- 21.0 cu. in. capacity
- Acceptable in 2-hour fire rated walls
Provides additional cubic capacity. May be used an outlet box for surface conduit. Constructed from pre-galvanized steel.
- 4 in. x 1-1/2 in. D
- Drawn steel construction
- Supplied with 2-1/2 in. and 2-3/4 in. knockouts
- Combination Phillips/slotted screw heads
- 15.5 cu. in. capacity
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8 to 32 cover mounting screws assembled.
- TKO knockout design provides installation flexibility
- Combination screw heads allow quick installation
- Welded construction
- Ten 1/2 in. KNOCK OUT and 6 TKO KNOCK OUT
- UL Listed
- 21.0 cu. in. capacity
- Raised ground
- Acceptable in 2-hour fire rated walls