Searched for "39131700"
Protect and route your wiring with durable and versatile conduits from Cantex. This Schedule 40 PVC conduit is ideal for both underground and aboveground applications. Its sturdy construction protects electrical wires from potential damage while allowing easy installation in tight spaces. The 10-foot length provides ample coverage, while the diameter accommodates standard wiring needs. This bell-ended conduit ensures seamless connections, saving time and effort. It's engineered to resist corrosion, rust, and UV sunlight and it's perfect for indoor and outdoor environments. Our electrical conduit conforms to UL651 and NEMA TC-2 standards, guaranteeing reliable performance and safety. Our conduit is ETL-listed and is rated for conductors up to 90 degrees Celsius so you can meet the demands of modern electrical projects. Proudly made in the USA, it combines quality and compliance to suit professional and DIY installations.
- Nonmetallic PVC conduit is corrosion, rust, and sunlight-resistant
- ETL listed indoor or outdoor electrical conduit
- This wire conduit conforms to UL651 and NEMA TC-2 standards
- PVC conduit rated for use with 90-degree Celsius conductors
- Made in USA
Rely on 1 in. EMT 1-Hole Straps (4-Pack) for assurance that EMT conduit is safely installed. These zinc-plated straps snap on and help with load bearing. Positively snaps onto the conduit.
- Secures EMT conduit to wood, masonry or a similar surface where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL and CSA Listed
- For indoor or outdoor applications
The 1/2 in. Non-Metallic Type T Conduit Body is a non-threaded body hub made of PVC. The conduit body has a textured lid and a foam in-place gasket. This fitting is compatible with rigid non-metallic conduit (RNC) and can be used for indoor and outdoor applications.
- For indoor and outdoor use
- Made of non-corrosive, non-conductive PVC
- Compatible with RNC conduit
- Maximum working temperature of 120°F
- UL and CSA listed
The 3/4 in. Offset Conduit Nipple is designed to provide an offset when flexibility is needed to finish off installations using multiple boxes and enclosures. It is made of corrosion-resistant zinc alloy and designed for use with rigid or IMC conduit. This conduit nipple meets UL and CSA requirements.
- Provides flexibility in multiple-box installations
- Offsets the axis of raceways
- Corrosion-resistant, high-strength zinc alloy
- Can be installed indoors or outdoors
- UL and CSA listed
With the 1-1/4 in. Twin-Screw Clamp Connector, you can adjoin non-metallic sheathed cable or flexible cord to a metal enclosure such as a steel outlet box. The screws feature a Tri Drive design for Phillips, slotted and square screwdriver compatibility.
- Secures non-metallic sheathed cable and flexible cord to a metal enclosure such as a steel outlet box
- High-strength, corrosion-resistant zinc alloy body and locknut
- Galvanized steel clamp and screws
- UL and CSA listings
- Reversible locknut designed to cut through protective coatings on boxes and enclosures to ensure ground continuity
- Tri drive screw head design will work with Phillips, slotted and square screwdrivers
- For indoor use
Protect and route your wiring with durable and versatile conduits from Cantex. This Schedule 40 PVC conduit is ideal for both underground and aboveground applications. Its sturdy construction protects electrical wires from potential damage while allowing easy installation in tight spaces. The 10-foot length provides ample coverage, while the diameter accommodates standard wiring needs. This bell-ended conduit ensures seamless connections, saving time and effort. It's engineered to resist corrosion, rust, and UV sunlight and it's perfect for indoor and outdoor environments. Our electrical conduit conforms to UL651 and NEMA TC-2 standards, guaranteeing reliable performance and safety. Our conduit is ETL-listed and is rated for conductors up to 90 degrees Celsius so you can meet the demands of modern electrical projects. Proudly made in the USA, it combines quality and compliance to suit professional and DIY installations.
- Nonmetallic PVC conduit is corrosion, rust, and sunlight-resistant
- ETL listed indoor or outdoor electrical conduit
- This wire conduit conforms to UL651 and NEMA TC-2 standards
- PVC conduit rated for use with 90-degree Celsius conductors
- Made in USA
Protect and route your wiring with durable and versatile conduits from Cantex. This Schedule 40 PVC conduit is ideal for both underground and aboveground applications. Its sturdy construction protects electrical wires from potential damage while allowing easy installation in tight spaces. The 10-foot length provides ample coverage, while the diameter accommodates standard wiring needs. This bell-ended conduit ensures seamless connections, saving time and effort. It's engineered to resist corrosion, rust, and UV sunlight and it's perfect for indoor and outdoor environments. Our electrical conduit conforms to UL651 and NEMA TC-2 standards, guaranteeing reliable performance and safety. Our conduit is ETL-listed and is rated for conductors up to 90 degrees Celsius so you can meet the demands of modern electrical projects. Proudly made in the USA, it combines quality and compliance to suit professional and DIY installations.
- Nonmetallic PVC conduit is corrosion, rust, and sunlight-resistant
- ETL listed indoor or outdoor electrical conduit
- This wire conduit conforms to UL651 and NEMA TC-2 standards
- PVC conduit rated for use with 90-degree Celsius conductors
- Made in USA
These galvanized 1/2 in. EMT Compression Connectors (5-Pack) connect EMT conduit to steel outlet boxes, load centers and other metal enclosures. Not for use in underground applications. These connectors meet UL and CSA requirements.
- Connects EMT conduit to metal enclosures such as load centers and steel outlet boxes
- Made of galvanized steel
- UL and CSA Listed
- Concrete tight when taped
Protect and route your wiring with durable and versatile conduits from Cantex. This Schedule 40 PVC conduit is ideal for both underground and aboveground applications. Its sturdy construction protects electrical wires from potential damage while allowing easy installation in tight spaces. The 10-foot length provides ample coverage, while the diameter accommodates standard wiring needs. This bell-ended conduit ensures seamless connections, saving time and effort. It's engineered to resist corrosion, rust, and UV sunlight and it's perfect for indoor and outdoor environments. Our electrical conduit conforms to UL651 and NEMA TC-2 standards, guaranteeing reliable performance and safety. Our conduit is ETL-listed and is rated for conductors up to 90 degrees Celsius so you can meet the demands of modern electrical projects. Proudly made in the USA, it combines quality and compliance to suit professional and DIY installations.
- Nonmetallic PVC conduit is corrosion, rust, and sunlight-resistant
- ETL listed indoor or outdoor electrical conduit
- This wire conduit conforms to UL651 and NEMA TC-2 standards
- PVC conduit rated for use with 90° Celsius conductors
- Made in USA
The 1/2 in. Type LB Threaded Aluminum Conduit Body is designed to gain access to the interior of a raceway for wire pulling, maintenance and splicing. It can be used with rigid and IMC conduit and is made with corrosion-resistant, copper-free die-cast aluminum. The conduit body is UL and CSA listed for safety.
- Designed to gain access to raceway interiors for wire pulling, splicing, and maintenance
- For use with rigid and IMC conduit
- For indoor and outdoor applications
- Corrosion-resistant, copper-free die-cast aluminum
- UL and CSA Listed to help ensure safety
The Arlington Industries Snap-Tite 3/8 in. Duplex Saddlegrip Connector is a versatile high-quality electrical fitting that is suitable for indoor use. This connector is designed for use with aluminum and steel, AC and MC flex cables. Die-cast zinc construction provides durability, while the insulated throat offers additional safety. It installs into a 1/2 in. knockout.
- Ideal for firm, reliable connections
- Die-cast zinc provides durability
- Designed for use with aluminum and steel, AC and MC flex cables
- Insulated throat for added safety
- Snap-tite connector enables quick and easy installation
The 1 in. Twin-Screw Clamp Connector is designed to connect non-metallic sheathed cable and flexible cord to a steel outlet box or other metal enclosure. Corrosion resistant. Locknut is reversible. It is designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Connects non-metallic sheathed cable and flexible cord to metal enclosures
- Made of corrosion-resistant zinc alloy and galvanized steel
- Tri-drive screw-head design works with any screwdriver
- Reversible locknut is designed to cut through protective coatings and form a grounded connection
- UL and CSA Listed
Use the 2 in. Non-Metallic Male Terminal Adapter to adapt Sch. 40 and Sch. 80 rigid non-metallic conduit to threaded fittings and metallic systems. Non-metallic PVC resists corrosion, rust, impact and damage due to exposure to sunlight. The socket end attaches to a socket fitting using solvent cement.
- Adapts non-metallic conduit to threaded fittings and metallic systems
- Non-metallic PVC is heat, fire and corrosion resistant
- Designed for use with Sch. 40 and Sch. 80 non-metallic rigid conduit
- UL and CSA listed for safety and peace of mind
- Socket fitting attaches using solvent cement
The 2 in. Conduit Locknuts (2-Pack) are designed to secure rigid and IMC conduit or various threaded fittings to steel outlet boxes or other metal enclosures. They provide a grounded connection and are suitable for indoor applications. Designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Secure rigid and IMC conduit or threaded fittings to metal electrical enclosures
- Made of galvanized steel
- Exceed UL 514B requirements
- Cut through protective coatings on boxes to assure ground continuity
With the 1/2 in. EMT Set-Screw Coupling, you can safely join 2 pieces of EMT conduit together. This steel coupling is concrete-tight when taped. These couplings meet UL and CSA requirements.
- Joins 2 lengths of EMT together
- Made of steel electro-plated with zinc
- UL and CSA listed
- Concrete-tight when taped
The 2 in. Service Entrance Cap is designed for use in overhead service entrances with rigid conduit, intermediate metal conduit (IMC) or EMT conduit. The cap serves as a connecting point for the service entrance wires.
- Connects service entrance wires
- Copper-free die cast aluminum resists corrosion
- Designed for indoor or outdoor use in overhead service entrances
- Compatible with rigid conduit, EMT conduit or IMC
- UL and CSA listed for safety and peace of mind
- Clamp-on style for installation
The 1/2 in. EMT Set Screw Connectors (5-Pack) are designed to connect and effectively bond EMT conduit to steel outlet boxes, load centers and other metal enclosures. Their bodies and locknuts are made with die-cast zinc alloy for strength and their set screws are made from zinc-plated steel. Their set screws' Tri-Drive head design works with Phillips, slotted and square screwdrivers.
- Connect and effectively bond EMT conduit to steel outlet boxes, load centers and other metal enclosures
- May be used indoors and in concrete-tight applications when taped
- Body and locknut made with die-cast zinc alloy
- Set screw made with zinc-plated steel
- Tri-drive screw head design for use with Phillips, slotted and square screwdrivers
- Screw thread is designed to not vibrate loose
- Reversible locknut designed to cut through protective coatings on boxes and enclosures
- CSA and UL Listed for safety
Snap-2-It 3/8 in. Connectors (50-Pack) are fast and easy to use. Simply push the cable into the fitting and rotate it until it is tight. To remove the cable, simply turn it counterclockwise. It installs into a 1/2 in. knockout.
- Connects metallic cable quickly and easily
- Die-cast zinc construction
- Can be used with MC/HCF steel and aluminum cable, AC/HCF steel and aluminum cable, flexible steel and aluminum conduit and MC continuous corrugated aluminum cable
- UL- and CSA safety listed
- Concrete tight when taped
- 1/2 in. KO size
Install the 2 in. Non-Metallic Sheathed Cable Clamp Connectors when joining non-metallic sheathed cables and flexible cords to steel outlet boxes or other metal enclosures. A reversible locknut breaches the protective coating on the box or enclosure to maintain ground continuity. This connector meets UL and CSA a requirements.
- Connects non-metallic sheathed cables and flexible cords to steel outlet boxes or other metal enclosures
- Body and locknut die-cast of high-strength zinc alloy
- Clamp and screws made of zinc-plated steel
- Reversible locknut cuts through protective coatings on boxes and enclosures to assure ground continuity
- UL and CSA safety listings
- Indoor use only
- Screws work with Phillips, slotted and square screwdrivers
- Resists corrosion
The 2 in. Type LB Nonmetallic Conduit Body has a non-threaded body. Made of rigid PVC. Conduit is non-conductive and non-corrosive. Easy application.
- Textured lids
- Foam-in-place gasket
- Compatible with RNC-type conduits
- UL and CSA listed for safety
The Electrical Box Extender lends support to the contents of a wall box. This non-conductive extender helps prevent arcing by forming a barrier between the box and the metal screws on the device. This box extender has a 2-hour fire rating.
- Levels and supports wiring devices in an electrical box
- Helps prevent arcing by forming a barrier between a metal box and metal side screws on the device
- Heavy-duty, non-conductive plastic construction
- UL and CSA safety listings
- Complies with 2008 NEC Article 314.20
The Halex 1-1/4 in. - 3 in. Adjustable Wire Holder is designed to be installed below the overhead service-entrance cap as a holding device for incoming service-entrance wires. It is made of porcelain reinforced with galvanized steel. It is easy to install.
- Securely holds overhead service-entrance wires
- Made of porcelain and galvanized steel
- For indoor or outdoor use
- Installs easily in minutes
The 3/4 in. Twin-Screw Clamp Connectors (5-Pack) are designed to connect non-metallic sheathed cable and flexible cord to a steel outlet box or other metal enclosure. They are ideal for service entrances or other indoor applications. This clamp connector meets UL and CSA requirements.
- Connect non-metallic sheathed cable and flexible cord to a steel outlet box or other metal enclosure
- Corrosion-resistant zinc diecast construction
- Reversible locknut is designed to cut through protective coatings to assure ground connectivity
- UL and CSA Listed
- Tri-drive screw design works with all screwdrivers
- Locknut is reversible, it is designed to cut through protective coatings on boxes and enclosures to assure ground continuity
- Corrosion resistant
Wall Plates are used for home, commercial and industrial settings for enhanced durability and appearance. They feature a Premium North American powdercoat for corrosion resistance. Metal wallplates have a beauty, weight and feel that plastic can't replace.
- Easily primed and paintable to match or compliment walls
- Won't bow, crack or distort during installation
- Solid sound compared to thin, hollow resonance of economy plastic plates
- Fixture mount
- Includes matching screws
The 3/4 in. Threadless Compression Conduit Connectors (2-Pack) are designed to connect and effectively bond rigid conduit and intermediate metal conduit (IMC) to metal enclosures. Made of zinc-plated steel. These connectors meet UL and CSA requirements.
- Connects and positively bonds conduit to a steel outlet box or other metal enclosure
- Zinc-plated steel construction resists corrosion
- Compatible with rigid conduit and intermediate metal conduit (IMC)
- UL and CSA listed for safety
- Designed for indoor use and in concrete tight applications
The 1/2 in. Rigid Conduit Coupling can be used inside and outside and is crafted with galvanized steel to help ensure strength. The coupling is designed to join and bond rigid or IMC conduit together. It is UL listed for safety.
- Joins and effectively bonds 2 threaded rigid or IMC conduit runs together
- Suitable for indoor and outdoor applications
- Galvanized steel construction
- Designed to resist corrosion for durability
- UL listed for safety
The 2 in. Threadless Compression Conduit Connector is designed to connect and bond IMC and rigid conduit to steel outlet boxes and other metal enclosures. It is made with corrosion-resistant zinc-plated steel for strength and features a steel-plated compression ring that positively bonds the conduit to the connector. CSA and UL listed for safety.
- Connects and bonds IMC and rigid conduit to steel outlet boxes and other metal enclosures
- May be used indoors and in concrete-tight applications
- Corrosion-resistant zinc-plated steel construction
- Steel-plated compression ring positively bonds conduit to the connector
With the 3/4 in. EMT Set-Screw Coupling, you can safely join 2 pieces of EMT conduit together. This galvanized steel coupling is for indoor use. These couplings meet UL and CSA requirements.
- Joins 2 lengths of EMT together
- Made of galvanized steel
- UL and CSA listed
- For indoor use
Use the Halex 3/4 in. Insulating Bushings (10-Pack) with locknuts to terminate threaded rigid conduits and intermediate metal conduits (IMC) to outlet boxes. The rounded surface of the bushings prevents damage to wire insulation. Insulating bushings are required by the National Electrical Code (NEC).
- Use to terminate a threaded rigid or IMC conduit to an outlet box
- Indoor or outdoor use
- Made from high-impact thermoplastic that is flame retardant to 150 degree C
- UL and CSA Listed
- Required by the NEC
When load bearing is required, use these zinc-plated steel 3/4 in. EMT 1-Hole Straps (100-Pack) to secure EMT conduit to surfaces such as wood and masonry. Usable indoors and outdoors. These straps are UL and CSA listed.
- Secures EMT conduit to surfaces such as wood and masonry where load bearing is required
- Zinc-plated steel for corrosion resistance
- UL and CSA listed
- Positively snaps on conduit when installed
Non-Metallic straight snap2It connector for use with non-metallic liquid tight conduit type B only. They offer the fastest, easiest installation. You'll get a super-secure, liquid-tight seal. Plus, they are removable and reusable.
- 3/4 in. trade size
- Easy to install, pushes on to conduit, no tools
- Connectors are produced from UV rated plastic for long outdoor life
- UL CSA Listed
The 2 in. Non-Metallic Meter Offset is a high-quality fitting designed for indoor and outdoor use. Non-metallic PVC resists rust, corrosion, impact and the damaging effects of sunlight. The meter offset features external ridges for containment in concrete and can be used with sch. 40 and sch. 80 conduit.
- Brings electrical service into a meter box
- Non-metallic PVC is heat, fire and corrosion resistant
- Compatible with sch. 40 or sch. 80 conduit
- Ridges on the outside for concrete encasement
- UL Listed for safety and peace of mind
- Socket on 1 end with threads on offset for easy installation
Screw-On 90 degree non-metallic connector for use with non-metallic liquid tight conduit, type B. The connector is produced from UV rated plastic for long outdoor life. Simply screw the connector onto the conduit until it stops, if the fittings are not in alignment with the knockout, you may unscrew the fitting up to one full turn for adjustment.
- Conduit threads onto ferrule and up inside the outer body, inside taper squeezes down on the outside of conduit for a superior liquid tight seal
- UV rated plastic
- Use with non-metallic liquid tight conduit, type B
- Also for use with flexible non-metallic tubing
- Trade size: 1/2 in.
- Knockout size: 1/2 in.
- Dimensions: 2.110 in. x 0.542 in. x 2.525 in.
3#1 to 3#2/0 1-Hole Service Entrance Cable Straps (10-Pack) are a premier choice for securing service entrance cables. Attach to wood, masonry and more, inside or outdoors. They are corrosion resistant. They are constructed of steel.
- Secures bare solid copper wire to a working surface
- Made of steel
- For use with sizes 3#1 - 3#2/0
- UL Listed
If you need a conduit fitting to protect your PVC, EMT or steel conduit, you've come to the right place. Here are some important details for HUBBELL WIRING Device-Kellems Insulated Connector. Material: Nylon, For Use With: Nonmetallic Flexible Conduit, Conduit Size: 3/4 in.
- Nylon compression nut has a tapered dome to tighten ferrule onto conduit
- Neoprene O-ring provides liquid tight seal
- Non integral ferrule provides conduit seal and pullout protection
- Fixed 90 degree fittings for non-metallic conduit
Add the 1-1/4 in. Service Entrance Cap to conduit that meets an overhead service entrance. This cap is made of aluminum and can be used indoors or outdoors.
- Serves as a connecting point for overhead service entrance wires on top of EMT, rigid or IMC conduit
- Copper-free die-cast aluminum resists corrosion
- UL and CSA Listed
- Clamp-on design
- For indoor or outdoor applications
Wiremold small surface metal raceway systems are the ideal choice for a homeowner that wants to extend circuits or communication cabling in their home. Surface metal raceway allows you to extend circuits, add fixtures or outlets without disturbing the drywall, plaster or insulation in your home. All parts are paintable to blend with room decor. The leading choice of professionals is now available for your DIY project.
- Shallow outlet box is used for most switches and receptacles when extending an electrical circuit from an existing switch or receptacle
- Base has two 1/2 in. trade sized knockouts
- Ivory finish
- Paintable using oil based products
- UL listed
1-1/4 in. Straight Non-Metallic Connector for use with non-metallic liquid-tight conduit. It may be used with type B only. It is produced from UV rated plastic for long outdoor life.
- May be secured to conduit while fully assembled because of our no-spin ferrule
- Simply loosen nut and screw onto conduit
- Positive liquid-tight seal is provided by our pressure sensitive internal gland when the nut is tightened
- Liquid-tight seal is also assured between the fitting and box by a sealing ring
- 1-1/4 in. knockout
This 1-1/4 in. EMT Compression Couplings (2-Pack) are ideal for extending a length of EMT. They join 2 sections indoors or in concrete and are galvanized to ward off corrosion. Use these couplings indoor only or in concrete-tight applications when taped.
- Connects 2 lengths of EMT conduit
- Galvanized steel resists corrosion
- CSA and UL safety listings
- For indoor use or in concrete-tight applications when taped
For wire pulling made easy, choose the 3/4 in. 90 degree EMT Pull Elbow. A detachable cover facilitates wire pulling. The elbow's zinc alloy construction resists corrosion.
- Connects EMT conduit together at a 90 degree inside bend
- Removable aluminum cover facilitates wire pulling
- Die-cast of high-strength zinc alloy with zinc-plated steel screws for corrosion resistance
- UL and CSA Listed
- For indoor use only
Small surface metal raceway systems are the ideal choice for a homeowner that wants to extend circuits or communication cabling in their home. Surface metal raceway allows you to extend circuits, add fixtures or outlets without disturbing the drywall, plaster or insulation in your home. All parts are paintable to blend with room decor. The leading choice of professionals is now available for your DIY project.
- Used as an outlet box when extending an electrical circuit from an existing switch
- Base has two 1/2 in. trade sized knockouts
- Neutral, ivory finish
- Paintable using oil based products
- UL listed
Use a pair of 1 in. x 1/2 in. Rigid or IMC Conduit Reducing Washers (2-Pack) to reduce the knockout in a steel outlet box or similar enclosure. Each washer has a raised flange for positive seating. Corrosion resistant.
- Reduces the size of the knockout in a steel outlet box or other metal enclosure
- 2 washers required per knockout
- Galvanized steel is corrosion resistant
- UL and CSA listed
- Raised flanges allow for positive seating in the knockout
- For indoor or outdoor applications
Cable protector protects NMSC or raceway wires running through wood studs from accidental nail, screw or drill penetration. No fasteners needed with the cable protector. The dimension of protector is 2-9/16 in. long x 1-1/2 in. wide.
- 1/2 in. integral spikes used to mount to wood stud
- Made of pre-galvanized 0.0625 in. thick steel
- No additional hardware required
- Position protector and hammer down spurs
The Blackburn 1/2 in. - 1 in. Type-J Bronze Ground Clamp connects a ground conductor to a water pipe or copper tube. This ground clamp offers corrosion-resistant screws and a highly conductive copper alloy construction. Cast Bronze Ground Clamp for Wire Range 10 - 2.
- Similar to aluminum water pipe clamp, but lighter in construction
- Ground pipe clamp
- Grounding devices or assemblies
- 1/2 in. - 1 in. tier
Depend on the 3/4 in. EMT Compression Couplings (5-Pack) for joining lengths of EMT conduit. These galvanized couplings can be installed either inside or in concrete if taped. These are steel with zinc electro-late.
- Connects 2 lengths of EMT conduit
- Galvanized steel resists corrosion
- CSA and UL safety listings
- For indoor use and concrete-tight applications when taped
For securing conduit, use these Snap-Tite 3/4 in. Connectors (2-Pack). They are easy to install thanks to a simple snap-in design that goes into a knockout without the need of a locknut. Can handle up to 2 type of NM cable at one time.
- Holds conduit securely in place
- Die-cast zinc
- Accepts cable sizes ranging from 0.300 to 0.780
- Spring steel clip for non-metallic cable
- UL- and CSA listed
- Simply snaps into knockout for easy installation
Turn to the 1-1/4 in. EMT Compression Connectors (3-Pack) to join lengths of EMT to steel outlet boxes, load centers or other metal enclosures. Install these galvanized connectors either indoors or in concrete-tight applications. The connectors meet UL and CSA requirements.
- Connects EMT conduit to a steel outlet box, load center or other metal enclosure
- Galvanized steel resists corrosion
- CSA and UL safety listings
- For use indoors or in concrete-tight applications when taped
Install the 1-1/2 in. Twin Screw Non-Metallic Sheathed Cable Clamp Connectors to fix non-metallic sheathed cable and flexible cord to steel outlet boxes or other metal enclosures. A reversible locknut penetrates protective coatings on boxes and enclosures to maintain grounding. This cable clamp connector meets UL and CSA requirements.
- Connects non-metallic sheathed cable and flexible cord to a steel outlet box or other metal enclosure
- Body and locknut die-cast of high-strength zinc alloy
- Clamp and screws made of zinc-plated steel
- Reversible locknut cuts through protective coatings on boxes and enclosures to assure ground continuity
- UL and CSA safety listings
- For indoor use only
- Screws compatible with Phillips, slotted and square screwdrivers
- Resists corrosion